Database Users

Lost recovery, cant boot, only fastboot

Guys... when i tried to flash oos 3.0 on my op2 through twrp, i first wiped the data to install new rom, then install oos 3.0, it failed. I then flashed the recovery i downloaded from the thread, then restart the recovery
I cant boot into the recovery.
System can't boot
Is it called "brick"?
So i tried to flash stock recovery in pc by command, but it says "remote: device is locked. cannot flash images". any solution to this problem?
I can boot into fastboot mode

You need to run the phone in Qualcomm mode on a PC and run the recovery tool to fix you bootloader.
I did the same and it was a royal ball ache trying to find out how to fix it

Don't do what rosswaa said

Why not?

What you should do is boot your phone into fastboot mode, connect it to your pc. Flash this modified TWRP recovery img to your phone https://www.androidfilehost.com/?fid=24459283995297945. After that you have to flash this modified SuperSU (through the new recovery) https://www.androidfilehost.com/?fid=24459283995297946.
The normal recovery doesn't work in OOS 3.0 (just like in HOS) and it's the SuperSU that gives you the soft brick. A dirty flash of the modified SuperSU should fix it.
I also had your problem and I did what rosswaa said which shouldn't be necessary (I lost all my data and backups).

I didn't lose anything, but I tried doing what you said and my bootloader was screwed so wouldn't take a flashed recovery or anything (yes the modified one)
Wish I hadnt been so excited and just flashed but all sorted now

Hmm okay, if it doesn't work with flashing the new recovery img then do what rosswaa said and after that follow this post https://forums.oneplus.net/threads/installation-instructions-faqs-oxygenos-3-0-0.439108/

Obviously try what green says first, if it works then happy days

first i am really glad that someone give some advices on me. But since i am a noob, how can i flash twrp in fastboot mode? using command? "fastboot flash recovery xxx.img"? thx

SPiCa39's said:
Guys... when i tried to flash oos 3.0 on my op2 through twrp, i first wiped the data to install new rom, then install oos 3.0, it failed. I then flashed the recovery i downloaded from the thread, then restart the recovery
I cant boot into the recovery.
System can't boot
Is it called "brick"?
So i tried to flash stock recovery in pc by command, but it says "remote: device is locked. cannot flash images". any solution to this problem?
I can boot into fastboot mode
Click to expand...
Click to collapse
1 Install official TWRP 3.x via fastboot twrp.me/devices/oneplustwo.html
Reboot to recovery
2 install this modified version of TWRP
forum.xda-developers.com/oneplus-2/development/recovery-teamwin-recovery-project-3-0-0-t3310713
Reboot to recovery
3 install oos3 (And supersu)
Sorry i can't post link

[Need help]Rooting moto g4 plus in stock june security patch level.

I want to root my moto g4 plus(unlocked bootloader and twrp flashed). Anyone knows how to root moto g4 plus. And i also want to know that how to increase battery backup after rooting(is it a myth).

@ADITYA_KUMAR this has been asked and explained many times and once more.
- Take Backup
- get Elemental-X kernel (see development section and download correct one )
- flash with TWRP
- get latest SuperSU : SuperSU
- now you can follow same guide of MM from step 5 : Guide
Don't Forget to Take Backup..

____Mdd said:
@ADITYA_KUMAR this has been asked and explained many times and once more.
- Take Backup
- get Elemental-X kernel (see development section and download correct one )
- flash with TWRP
- get latest SuperSU : SuperSU
- now you can follow same guide of MM from step 5 : Guide
Don't Forget to Take Backup..
Click to expand...
Click to collapse
How to take backup and restore it. I flashed twrp image. Before rebooting twrp works fine. But after rebooting i am not able to open twrp. I think it got removed.

ADITYA_KUMAR said:
How to take backup and restore it. I flashed twrp image. Before rebooting twrp works fine. But after rebooting i am not able to open twrp. I think it got removed.
Click to expand...
Click to collapse
What happens if you select Recovery from Bootloader ? Is it booting in Stock Recovery ?
In TWRP go to Backup and make backup of /system /data /boot.
If anything bad happens while flashing/Rooting then you can restore it.

The first time, you must open TWRP from the bootloader directly or the recovery gets overwritten.
For rooting, you can flash Magisk instead of flashing SuperSu. Other steps remain exactly the same.

____Mdd said:
What happens if you select Recovery from Bootloader ? Is it booting in Stock Recovery ?
In TWRP go to Backup and make backup of /system /data /boot.
If anything bad happens while flashing/Rooting then you can restore it.
Click to expand...
Click to collapse
When i booted into recovery mode. It shows no command.

ADITYA_KUMAR said:
When i booted into recovery mode. It shows no command.
Click to expand...
Click to collapse
That's stock Recovery, you need to flash TWRP again.

____Mdd said:
That's stock Recovery, you need to flash TWRP again.
Click to expand...
Click to collapse
I flashed twrp 2 times. But every time i restarted my phone it removed automatically.

ADITYA_KUMAR said:
I flashed twrp 2 times. But every time i restarted my phone it removed automatically.
Click to expand...
Click to collapse
Did you flashed TWRP and with the next command booted immediately into twrp?

strongst said:
Did you flashed TWRP and with the next command booted immediately into twrp?
Click to expand...
Click to collapse
Commands used:
Fastboot flash recovery name.img
It gives output as image not signed or corrupt.
After that i typed command fastboot reboot bootloader.
I open recovery mode. It opens twrp. But after i restart my phone. It automatically removes the twrp.

ADITYA_KUMAR said:
Commands used:
Fastboot flash recovery name.img
It gives output as image not signed or corrupt.
After that i typed command fastboot reboot bootloader.
I open recovery mode. It opens twrp. But after i restart my phone. It automatically removes the twrp.
Click to expand...
Click to collapse
This is your problem. You must open recovery from the bootloader menu the very first time. Or TWRP is overwritten with stock recovery. I don't know why that is. But that is how it is...

baunthiyal said:
This is your problem. You must open recovery from the bootloader menu the very first time. Or TWRP is overwritten with stock recovery. I don't know why that is. But that is how it is...
Click to expand...
Click to collapse
It means that i don't have to run the fasboot reboot bootloader command and after finishing the flashing i have to open the recovery mode directly?

Yes
ADITYA_KUMAR said:
It means that i don't have to run the fasboot reboot bootloader command and after finishing the flashing i have to open the recovery mode directly?
Click to expand...
Click to collapse
Reboot into bootloader.
Flash recovery - fastboot flash recovery twrp-xxx.img
Open recovery from bootloader menu (by using the volume and power buttons)
From there you can reboot and your recovery will work normally after this, most probably.

baunthiyal said:
Reboot into bootloader.
Flash recovery - fastboot flash recovery twrp-xxx.img
Open recovery from bootloader menu (by using the volume and power buttons)
From there you can reboot and your recovery will work normally after this, most probably.
Click to expand...
Click to collapse
I need to root my stock nougat( june version).What should i do after that.

I'll tell you what I did.
1. Flash Elemental Ex kernel. https://forum.xda-developers.com/moto-g4-plus/development/kernel-elementalx-g4-0-01-t3424836
2. Flash Magisk. https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445

baunthiyal said:
Reboot into bootloader.
Flash recovery - fastboot flash recovery twrp-xxx.img
Open recovery from bootloader menu (by using the volume and power buttons)
From there you can reboot and your recovery will work normally after this, most probably.
Click to expand...
Click to collapse
It didn't work. I flashed twrp. I opened recovery mode by using volume down to scroll to recovery mode and power button to select it. I booted in twrp mode and rebooted system from there. After that i power off my phone and tried to open twrp again, but it is showing no commands only. I didn't boot into twrp again.

ADITYA_KUMAR said:
It didn't work. I flashed twrp. I opened recovery mode by using volume down to scroll to recovery mode and power button to select it. I booted in twrp mode and rebooted system from there. After that i power off my phone and tried to open twrp again, but it is showing no commands only. I didn't boot into twrp again.
Click to expand...
Click to collapse
Try commands,
fastboot oem fb_mode_set
fastboot flash recovery name.img
Fastboot oem fb_mode_clear
Then directly boot into recovery,
Then again boot into recovery through twrp itself (there is option for it in reboot) or try anything.

Thank you guys i successfully rooted my moto g4 plus(xt1643)

* * * [Pixel 2 XL] - UPDATE Monthly Factory Image / UPGRADE To New OS * * *

WHO IS THIS GUIDE FOR:
Anyone updating factory images within the same OS version (10 to 10)
Anyone upgrading from one OS to another (9x to Android 10)
Below is a QUICK REFERENCE guide for those who have done this before, and a DETAILED STEP BY STEP guide for the first or second timer who needs each and every step outlined. Links to all required files are also provided (make sure you are selecting the latest version)
UPDATE TO THE LATEST FACTORY IMAGE . . . UPGRADE TO THE NEXT OS. . .
PREP WORK:
* Unlocked bootloader. (*performing critical_unlock only required with bootloader versions PRIOR to TMZ20a) read it here.
* Latest SDK Platform Tools found here.
* USB 2.0 & 3.0 cables available (trust me)
* Remove screen lock security before starting
* Remove all substratum overlays
*Download and extract the latest Taimen factory image (place the second extracted folder in Platform Tools folder)
CLEAN FLASH (wipe everything) or DIRTY FLASH (keep data)
Decide now whether you want a fresh OS that will restore your device to factory setup OR if you want to flash the latest factory image but keep your data.
For a clean flash: leave the FLASH-ALL file intact, change nothing.
To retain your data: EDIT the FLASH-ALL file and REMOVE the -w near the end of the script. Save the file and reopen it to ensure the -w has been removed,
When UPGRADING from one OS to another I reco a CLEAN FLASH (leave the -w intact)
Place these files on your sdcard (either before dirty flash or from PC after clean install):
* Latest TWRP.ZIP
* Your preferred customer kernel zip, I use ElementalX kernel
* Magisk uninstall instructions In the event you need to manually uninstall and reinstall MM
* Latest Magisk.zip
* Latest Magisk Manager APK
NOTE: On Android 10, when flashing TWRP Installer, kernels, magisk , etc. in TWRP, ignore the warning "FAILED TO MOUNT '/system' (invalid argument) this is a known issue with TWRP + 10 but affects nothing :good:
QUICK REFERENCE GUIDE for updating/upgrading Pixel 2 XL:
Once you verify 'fastboot devices' on command prompt
Type flash-all to install factory image (allow it to install, and boot into system)
Hold vol down and power button to boot into bootloader
Fastboot into twrp 3.3.0-0.IMG
Flash the twrp installer 3.3.0-0.ZIP,
Flash custom kernel, I use flar2's ElementalX Kernel. SELECT THE CORRECT 9X OR ANDROID 10 KERNEL
Let the system boot up to verify.
Reboot back into twrp and flash latest magisk
Reboot to system
Profit
DETAILED STEP BY STEP GUIDE for updating monthly factory images, or upgrading to the next OS (ie: 9x to 10x)
I reco a CLEAN FLASH (leave the -w intact) when jumping from one OS to a new one (not necessary when doing monthly factory updates within the same OS version)
Requirements:
*Unlocked bootloader and Critical_unlock* completed. (*critical_unlock required with bootloader versions PRIOR to TMZ20a) read it here.
*Latest SDK PlatformTools found here
*USB 2.0 & 3.0 cables available (trust me)
These files on your sdcard:
* Latest TWRP.ZIP
* Your preferred Custom Kernel, I use Elemental X Kernel
* Magisk uninstall instructions In the event you need to manually uninstall and reinstall MM
* Latest Magisk.zip
* Latest Magisk Manager APK
These files in your Platform Tools Folder:
* Latest factory image (MAKE SURE YOU DL THE CORRECT DEVICE IMAGE :good: )
* Latest TWRP.IMG
1. Make backup, move to PC (because you never know)
2. Disable all security; patterns, pins, etc.
3. In Developer Options, make sure USB DEBUGGING is on
4. Connect device to PC, verify fastboot is working type; fastboot devices (should see your device's serial number)
5. Fastboot latest factory image (To KEEP internal storage intact, edit and remove -w in "flash-all.bat" file and SAVE, to wipe entire device, leave flash-all unedited)
Type: FLASH-ALL (hit enter) Allow the OS to reboot and settle for a minute *REMEMBER LEAVING THE -W INTACT WILL WIPE YOUR DEVICE*
6. Reboot into BOOTLOADER, in CMD screen Type: fastboot boot <twrpxxx.img name> to boot into Latest TWRP.IMG
7. Once in TWRP, install Latest TWRP.ZIP from sdcard
8. Reboot back into Recovery
9. Install compatible custom kernel, I use flar2's ElementalX Kernel.
10. Reboot back into Recovery
11. Reboot into System, allow OS to settle for a few minutes
12. Boot into Recovery
13. Install Latest Magisk.zip
14. Reboot into System
15. Profit
Troubleshooting Tips & Other Information
Click here for * * * BASIC FASTBOOT/ADB TROUBLE SHOOTING FOR THE 2XL * * *
If you get stuck at the G screen, or bootloop into TWRP, try these steps:
-Perform a hard reboot (long press the power button) or
-Get back to TWRP (whether by booting into it from fastboot, or rebooting into bootloader -long press power & vol down- then boot into recovery) and reinstall the Magisk Uninstaller in TWRP a few times.
- If you are bootlooping into TWRP with Magisk installed, READ THIS!
- Safety Net message in Magisk "The Response Is Invalid" is a known issue[/URL] ... Be patient
View attachment 4572738
Make sure you have all the correct and/or latest versions of SDK Tools, factory image, TWRP.img and TWRP.zip, and Magisk
Note: as a matter of superstition, I reboot back into recovery each time after installing TWRP, cust kernel, and magisk, prior to booting into system. It is NOT required, but it works
Again, HUGE thanks to @Badger50 for his invaluable input

Az Biker said:
A lot of users have had success upgrading from Oreo to Pie and there are several tutorial / guide posts located in different threads, so I figured I'd centralize instructions in a Quick Reference Thread, that includes all needed file links and an easy to follow step by step.
Please feel free to make any suggestions to simplify or make this more accurate.
Requirements:
*Unlocked bootloader and Critical_unlock completed.
*Latest SDK Tools found here
*USB 2.0 & 3.0 cables available (trust me)
These files on your sdcard:
* TWRP 3.2.2-0.ZIP
*Flash kernel 3.0
* magisk uninstaller
*magisk zip 1674
* MM 5.8.3 APK
These files in your Platform Tools Folder:
* 9.0 factory image
*TWRP 3.2.2-0.IMG
1. Make backup, move to PC (because you never know)
2. Disable all security; patterns, pins, etc.
3. In Developer Options, make sure USB DEBUGGING is on
4. Verify fastboot is working type; fastboot devices (should see your device's serial number)
5. Fastboot 9.0 factory image(To KEEP internal storage intact, remove -w in "flash-all.bat" file and SAVE, to wipe entire device, leave flash-all unedited)
6. Type: fastboot boot <twrpxxx.img name> to boot into TWRP 3.2.2-0.IMG
7. Once in TWRP, install TWRP.ZIP on sdcard
8. Reboot back into Recovery, and install the magisk uninstaller in twrp,
9. Reboot back into Recovery and install Flash kernel 3.0
10. Reboot back into Recovery
11. Reboot into System, allow OS to settle for a few minutes
12. Install MM 5.8.3 APK
13. Reboot into Recovery
14. Install magisk zip 1674,
15. Reboot back into Recovery
16. Reboot into System
17. Profit
Note: as a matter of superstition, I reboot back into recovery each time after installing TWRP, cust kernel, and magisk, prior to booting into system. It is NOT required, but it works
Thanks to @Badger50 for figuring out the right steps in this process!
Click to expand...
Click to collapse
Well done my brother!! :good::good:

Badger50 said:
Well done my brother!! :good::good:
Click to expand...
Click to collapse
I use unlock bootloader normal.
I was done follow your step but it's boot stuck google logo after flash magisk(16.74).

newyesor said:
I use unlock bootloader normal.
I was done follow your step but it's boot stuck google logo after flash magisk(16.74).
Click to expand...
Click to collapse
Sometimes it takes 5 minutes or so on first boot. If it doesn't work, do a hard restart a few times. If that doesn't work, flash magisk again in twrp.
You use unlock bootloader normal??

Badger50 said:
Sometimes it takes 5 minutes or so on first boot. If it doesn't work, do a hard restart a few times. If that doesn't work, flash magisk again in twrp.
You use unlock bootloader normal??
Click to expand...
Click to collapse
I use normal unlock bootloader.
I wait devices boot around 5 minutes and it 's reboot in to twrp recovery.

newyesor said:
I use normal unlock bootloader.
I wait devices boot around 5 minutes and it 's reboot in to twrp recovery.
Click to expand...
Click to collapse
So your bootloader _critical partition isn't unlocked?? Which can't be right either since you've been able to boot fastboot the update to P. Guess I just don't know what your trying to say.

Badger50 said:
So your bootloader _critical partition isn't unlocked?? Which can't be right either since you've been able to boot fastboot the update to P. Guess I just don't know what your trying to say.
Click to expand...
Click to collapse
I use this command for flash unlock bootloader.
fastboot flashing unlock

newyesor said:
I use this command for flash unlock bootloader.
fastboot flashing unlock
Click to expand...
Click to collapse
Have you ever ran fastboot flashing unlock_critical..?
Have you actually booted into the 9.0.OS yet?

Badger50 said:
Have you ever ran fastboot flashing unlock_critical..?
Have you actually booted into the 9.0.OS yet?
Click to expand...
Click to collapse
I have never ran fastboot flashing unlock_critical.
Yes,My devices is base on android P and I was booted into the 9.0.OS.

newyesor said:
I use this command for flash unlock bootloader.
fastboot flashing unlock
Click to expand...
Click to collapse
If you flashed the factory image with no issues, then you must have completed critical_unlock as well, otherwise the new bootloader shouldn't have taken (as far as I understand).
I'd start from scratch again, and make sure you follow the process exactly. Many users have used this with no issue, so maybe you missed something? The first time I flashed the factory image to my 6P (my backup) I totally skipped flashing the boot.img, and wondered why it wouldn't boot

Kudos, just what I needed to update!

newyesor said:
I have never ran fastboot flashing unlock_critical.
Yes,My devices is base on android P and I was booted into the 9.0.OS.
Click to expand...
Click to collapse
Have you flashed the magisk uninstaller as well? Why are you showing magisk 16.0?

Badger50 said:
Have you flashed the magisk uninstaller as well? Why are you showing magisk 16.0?
Click to expand...
Click to collapse
Yes,i was flashed the magisk uninstaller as well.
I try to root with magisk on my devices.
I try to flash patch boot for root without twrp but it's not work.
I try to flash magisk follow you but it's not work.

Is flashing the kernel mandatory?

newyesor said:
Yes,i was flashed the magisk uninstaller as well.
I try to root with magisk on my devices.
I try to flash patch boot for root without twrp but it's not work.
I try to flash magisk follow you but it's not work.
Click to expand...
Click to collapse
Something just seems fishy to me. I've never heard of anyone not unlocking _critical, and being able to fastboot the factory image. However, it seems that you have somehow. All I can suggest is to fastboot the 9.0 again to both slots, and let it boot up each time.
Then fastboot into twrp, flash the installer zip, and let it boot up. Then go back to twrp, flash magisk uninstaller zip, then flash custom kernel, and let it boot up. Then go back to twrp, and flash magisk 1674 again.
If none of that works, I'd unlock _critical, which will wipe your phone, and then start over.

aznriceballman said:
Is flashing the kernel mandatory?
Click to expand...
Click to collapse
Not mandatory, but it keeps TWRP touch screen working among other things...

Just wanted to say thanks for this!
I didn't have time to update from DP5 yesterday, but I guess that was a good thing because now there's this guide, and it worked perfectly. Upgraded from DP5/flash 2.44 and who knows what Magisk version to all the latest and greatest in no time at all.
Thanks!

Badger50 said:
Something just seems fishy to me. I've never heard of anyone not unlocking _critical, and being able to fastboot the factory image. However, it seems that you have somehow. All I can suggest is to fastboot the 9.0 again to both slots, and let it boot up each time.
Then fastboot into twrp, flash the installer zip, and let it boot up. Then go back to twrp, flash magisk uninstaller zip, then flash custom kernel, and let it boot up. Then go back to twrp, and flash magisk 1674 again.
If none of that works, I'd unlock _critical, which will wipe your phone, and then start over.
Click to expand...
Click to collapse
im having an issue, i followed all instructions and got booted up an everything but when i flash twrp img it stays stuck on the twrp logo, flashed the one mentioned in o.p and the newest as well to remove any doubts, but no go. Any suggestions?

shooterlgk said:
im having an issue, i followed all instructions and got booted up an everything but when i flash twrp img it stays stuck on the twrp logo, flashed the one mentioned in o.p and the newest as well to remove any doubts, but no go. Any suggestions?
Click to expand...
Click to collapse
Do you have screen lock disabled?

Badger50 said:
Do you have screen lock disabled?
Click to expand...
Click to collapse
Yes sir

Stuck on "Fastboot Mode" screen

I stupidly tried using franco's app to flash cleanKernel on my rooted phone on 9.0.11, it failed of course and now can't boot my phone. I'm able to fastboot boot twrp.img but I'm not sure what is needed next. I've downloaded the full 9.0.11 ota file thinking something in it (or all of it) needs to be flashed from twrp. Afraid to do anything at this point for fear of losing data. Any tips are appreciated.
I've downloaded mauronofrio's rom-stock-fastboot utility but see he says it will clear data. I'm assuming all the .bat files will do this. Any way to avoid clearing internal storage?

soundneedle said:
From bootloader screen, using fastboot boot twrp.zip results in OP going to "Fastboot Mode" screen...and staying there. The zip is pushed to the phone but won't boot into TWRP. This started after I stupidly tried using franco's app to flash cleanKernel on my rooted phone. It failed of course and now can't boot my phone. My phone recently updated itself to 9.0.11, fyi.
Any ideas on how to fix this boot issue? Is it just a matter of flashing something from the full ota 9.0.11 file---some img file or something?
Click to expand...
Click to collapse
Wouldn't you want to be using a twrp.img not .zip?
fastboot boot twrp.img
Boot twrp from the img and then flash the zip once twrp boots?

I was able to recover...thank god. Just used mauronofrio's flash utility. Removed the "-w" flag from the flash-all.bat file and all is good.

Stuck on Fastboot Mode screen once I run fastboot boot twrp.img
bp328i said:
Wouldn't you want to be using a twrp.img not .zip?
fastboot boot twrp.img
Boot twrp from the img and then flash the zip once twrp boots?
Click to expand...
Click to collapse
Hi, I have just got a OnePlus 6T and I am getting this same error even though I am using the twrp.img - when I run fastboot boot 'twrp.img' it sticks on the Fastboot Mode screen.
I have the .zip on the phone's internal storage along with Magisk ready to install but I can't get there.
I did manage to get into Recovery once in the last 3 hours but under Advanced the only 2 options I have are to reboot to fastloader of reboot to recovery which just takes me round in circles!
Have tried everything I can find/think of right now and am no further down the line
Any help guidance will be greatly recieved as nothing I can find on the threads here seem to help
Thanks
s

Is the twrp.img even being flashed
SimmoMaz said:
Hi, I have just got a OnePlus 6T and I am getting this same error even though I am using the twrp.img - when I run fastboot boot 'twrp.img' it sticks on the Fastboot Mode screen.
I have the .zip on the phone's internal storage along with Magisk ready to install but I can't get there.
I did manage to get into Recovery once in the last 3 hours but under Advanced the only 2 options I have are to reboot to fastloader of reboot to recovery which just takes me round in circles!
Have tried everything I can find/think of right now and am no further down the line
Any help guidance will be greatly recieved as nothing I can find on the threads here seem to help
Thanks
s
Click to expand...
Click to collapse
When I think about it, it seems that the twrp.img I am flashing is not taking. When I go into recovery I get to choose 1 of 3 languages, I choose English and then I just get the 2 options as above - thing is, the font, layout etc. make it look like stock recovery and nothing like TWRP I have used before, no TWRP logo etc. Nothing

SimmoMaz said:
When I think about it, it seems that the twrp.img I am flashing is not taking. When I go into recovery I get to choose 1 of 3 languages, I choose English and then I just get the 2 options as above - thing is, the font, layout etc. make it look like stock recovery and nothing like TWRP I have used before, no TWRP logo etc. Nothing
Click to expand...
Click to collapse
Ok.. can you get into TWRP? Is so reflash the stock rom.. the once it has flashed do not reboot, go back to install and flash the lastest twrp .zip do not reboot, go back to install and flash/install magisk, once it installs then reboot to system... It will take a bit... Once it reboots check your Magisk manager you may need to reinstall it, reboot to TWRP and reflash it.. reboot to system band you should be good to go...

TWRP isn't there
lilbrat said:
Ok.. can you get into TWRP? Is so reflash the stock rom.. the once it has flashed do not reboot, go back to install and flash the lastest twrp .zip do not reboot, go back to install and flash/install magisk, once it installs then reboot to system... It will take a bit... Once it reboots check your Magisk manager you may need to reinstall it, reboot to TWRP and reflash it.. reboot to system band you should be good to go...
Click to expand...
Click to collapse
Thanks and apologies if a two posts appear from me, I submitted one about 20 minutes ago and it isn't showing.
The issue is more than that, even when I try to flash the TWRP image it doesn't seem to take. The phone gets stuck on the 'Fastboot Mode' OnePlus flash screen and hangs there.
I have to hold the power and vol+ keys to get the device to restart and I then receive a message saying 'bootloader unlocked, data insecure etc.' and to press the power to stop the boot process. If I leave it the phone boots into OOS10.3.3.
If I press the power button I can get to recovery mode (albeit there is a password screen there which I have never seen on other devices I've had). I put my password in and choose English. I am then given the two options; reboot to fastboot or reboot to recovery. There is no advanced option to allow me to install TWRP or Magisk zips, as a matter of fact I don't get any TWRP at all, it looks like stock recovery.
Is the phone defaulting to stock recovery and not the TWRP image? That is what, in my very non-expert opinion seems to be happening. Is that possible and if so, any ideas how to fix?
I have completely flashed the phone so it is on stock OOS (10.3.3.) so can start afresh. It is a refurbed 'like new' so could that have anything to do with it?
Thanks for reading the long post - am wondering if there are some other tools I need use to change how it boots?
S

SimmoMaz said:
Thanks and apologies if a two posts appear from me, I submitted one about 20 minutes ago and it isn't showing.
The issue is more than that, even when I try to flash the TWRP image it doesn't seem to take. The phone gets stuck on the 'Fastboot Mode' OnePlus flash screen and hangs there.
I have to hold the power and vol+ keys to get the device to restart and I then receive a message saying 'bootloader unlocked, data insecure etc.' and to press the power to stop the boot process. If I leave it the phone boots into OOS10.3.3.
If I press the power button I can get to recovery mode (albeit there is a password screen there which I have never seen on other devices I've had). I put my password in and choose English. I am then given the two options; reboot to fastboot or reboot to recovery. There is no advanced option to allow me to install TWRP or Magisk zips, as a matter of fact I don't get any TWRP at all, it looks like stock recovery.
Is the phone defaulting to stock recovery and not the TWRP image? That is what, in my very non-expert opinion seems to be happening. Is that possible and if so, any ideas how to fix?
I have completely flashed the phone so it is on stock OOS (10.3.3.) so can start afresh. It is a refurbed 'like new' so could that have anything to do with it?
Thanks for reading the long post - am wondering if there are some other tools I need use to change how it boots?
S
Click to expand...
Click to collapse
Ok.. are you using the latest TWRP? If you want in the guide section you can you the msmdow like ad tools to reset you phone to stock, and retry again..

THIS. I have the exact same issue. In short, I have the T-mobile version, and was able to unlock successfully. I am using twrp-3.2.3-0, and I have the img and zip in the same folder, same way Techibee does on Youtube. I then type "fastboot boot twrp-3.2.3-0-fajita.img", I get the "OKAY... OKAY... Booting... Finished" response in console. Then, the Fastboot screen appears and never leaves. I have done this 3 times now. I kept tweaking the process, but I'm nervous to keep debugging.

Stuck (
Hello guys,
I wanted to overclock my 6t global. so i had unlocked the bootloader then flashed the twrp. In twrp i firstly reset the os to factory setting and then i flash magisk and smurf kernel. but when i reboot after this my phone is stuck on the phone unlocked message.
ive tried flashing magisk only and then boot, it works. but when i flash smurf kernel i get stuck . why this happening plz help (

TWRP overwrite my ROM?!

Hi I had LOS19.1 installed running quite well. I wanted Magisk, so I went to the TWRP website, selected my device, and downloaded latest
twrp-3.7.0_12-1-cheeseburger_dumpling.img
at https://dl.twrp.me/cheeseburger_dumpling/ ...
Booted into fastboot mode, renamed the img to twrp.img, then per the instructions I did...
$ fastboot flash recovery twrp.img this took a minute
$ fastboot reboot
Then when I tried to reboot into recovery it would show the TWRP loading screen for like 30 seconds and phone would shut off... Tried again and same...
Frustrated I thought I would try the oldfashion way and try to boot into the image...
$ fastboot flash boot twrp.img
Same thing happened again with the TWRP loading screen. But it wont boot into the OS now... I got to fastboot and selected START, starts the TWRP loading and powerdown again.
Oh **** did I just overwrite my ROM install? What do I do?

you know the difference between recovery and boot partition? restore the backup of boot.img
read the instructions for installing TWRP
https://forum.xda-developers.com/t/...-a12-cheeseburger-dumpling-25-12-2022.4351795
for rooting device with Magisk, read the instructions for installing Magisk
https://github.com/topjohnwu/Magisk

alecxs said:
you know the difference between recovery and boot partition? restore the backup of boot.img
read the instructions for installing TWRP
https://forum.xda-developers.com/t/...-a12-cheeseburger-dumpling-25-12-2022.4351795
for rooting device with Magisk, read the instructions for installing Magisk
https://github.com/topjohnwu/Magisk
Click to expand...
Click to collapse
Im assuming boot has to do with booting the OS or bootloader... You mind commenting your thoughts on my mistake and what I should do?

on your second attempt, you flashed recovery into boot partition. you need to restore the boot.img now, otherwise you will boot into TWRP every time.

alecxs said:
on your second attempt, you flashed recovery into boot partition. you need to restore the boot.img now, otherwise you will boot into TWRP every time.
Click to expand...
Click to collapse
lol like in the other thread where would I get the boot.img? (yes I have these 2 devices with these 2 seperate problems). Appreciate your help so far..