Related
Hello,
After an unsuccessful attempt to upgrade a firefox OS phone from 1.3 to 1.4, I bricked it
This is the current status :
It is a ZTE Open C. Bought at LDLC. I am not fully sure whether it is a FFOS_EU_EBAYxxx or a FFOS_FR_ZTE_OPENC.xxx
Normal boot: it does not go beyond the firefox logo and gets stuck there
If I boot in FTM mode (volume down and power), I see it when I do fastboot devices.
It does not go in recovery mode any longer, after I did : "fastboot flash recovery recovery-clockwork-6.0.3.3-roamer2.img". Before that, I did manage to go in recovery mode, but none of the zips I tried would work. I would get an unsuccessful signature verification all the time.
In recovery mode - when it was working - I was unable to see the device with adb devices nor fastboot devices.
I do not believe it is rooted.
Help appreciated
If you have bought your device on LDLC (french online shop) it's a FR version.
Try to flash the image provided by ZTE France here (tool is for Windows only) :
http://www.ztefrance.com/downloads/Pack_root_du_ZTE_Open_C.zip
(this is a "rooted" image so that you'll be able to compile & flash your own FirefoxOS afterwards )
[SOLVED] Unbricked (and successful upgrade)
Thanks for your reply!
Actually, we finally managed to unbrick it.
In case somebody else is looking for this, the procedure is detailed here.
In our case, as adb wasn't working, we booted in FTM mode (volume down and power), were we could use fastboot.
Then
fastboot devices
fastboot boot cw_recovery_dp.img
when screen goes black, adb shell /sbin/black_screen_fix.sh. In our case, this does not seem to do anything? we do control c
adb shell /sbin/cw_recovery.sh. This works great.
We get a recovery screen from which we can apply updates without being bothered by 'invalid' signatures
Regards,
Hello..,
trying to flash RN3Pro to China stable 7.1.16
following exactly the guide in http://en.miui.com/thread-235865-1-1.html
using Windows 10 desktop (64bit), always error when flashing at 18s
message: "The system cannot find the file specified. (0x80070002: Max buffer sector is 256)"
tools from MiPhone20151028.exe
and drivers from MiSetup2.2.0.7032_2717.exe
what can I do to fix it..?
Thank you!
Same problem
d1eter said:
Hello..,
trying to flash RN3Pro to China stable 7.1.16
following exactly the guide in http://en.miui.com/thread-235865-1-1.html
using Windows 10 desktop (64bit), always error when flashing at 18s
message: "The system cannot find the file specified. (0x80070002: Max buffer sector is 256)"
tools from MiPhone20151028.exe
and drivers from MiSetup2.2.0.7032_2717.exe
what can I do to fix it..?
Thank you!
Click to expand...
Click to collapse
Try with mi pc suite..i solved with this...
giorgaras23 said:
Try with mi pc suite..i solved with this...
Click to expand...
Click to collapse
I tried, with Mi PC Suite the phone can't even detected.
Win10 (64bit).
at least with adb & miflash the phone is detected in Device Manager.
Put the phone into recovery mode.if the mi pc suite has an upgrade downleft do it...the program detect the phone after some efforts
giorgaras23 said:
Put the phone into recovery mode.if the mi pc suite has an upgrade downleft do it...the program detect the phone after some efforts
Click to expand...
Click to collapse
in the recovery mode, it only shows a phone image and instruction to connect the cable.
bootloader still locked.
d1eter said:
in the recovery mode, it only shows a phone image and instruction to connect the cable.
bootloader still locked.
Click to expand...
Click to collapse
I did it like this...look on miui forums they have a guide about this..
http://en.miui.com/forum.php?mod=viewthread&tid=235865&extra=page=1&mobile=2 just follow the guide again.
Download the necessary files that is updates (flash_all.bat and rawproject) and replace them to the images folder. And the max sector 256 will be gone. I tested this
Don't work for my. Same error. "The system cannot find the file specified. (0x80070002: Max buffer sector is 256)"
polumish said:
Don't work for my. Same error. "The system cannot find the file specified. (0x80070002: Max buffer sector is 256)"
Click to expand...
Click to collapse
This rom can be flashed in fastboot mode only to phone with unblocked bootloader. If your bootloader is locked, need run nex steps :
1. Download and flash with MiFlashUnlock kenzo_global_images_V7.1.8.0.LHOMICL_20160129.0000.14_5.1_global_9706e12561.tgz
2. After reboot and initial setup copi to internal flash root miui_HMNote3ProGlobal_6.3.18_342390824a_5.1.zip
3. Rename it to update.zip
4. Install it with standart updater (Settings > About rom > Update > 3 dots in right up, select update.zip)
5. After several seconds phone rebooted, and start flash rom.
Hi guys, i have exactly same problem and this is the solution :
download the last (very last) miflash : there is 2016 in his name (i can't give you link, i just suscribe on this forum to give you the answer so i m block for that) : type miflash 2016 on google and it s the third result
port com on your phone have to be equal or higher than 20
if you have hello problem in miflash, reboot your computer
I don't need to do that but desinstall qualcomm drivers and reinstall with new one inside miflash 2016 can help
Thanks
creposuke said:
Hi guys, i have exactly same problem and this is the solution :
download the last (very last) miflash : there is 2016 in his name (i can't give you link, i just suscribe on this forum to give you the answer so i m block for that) : type miflash 2016 on google and it s the third result
port com on your phone have to be equal or higher than 20
if you have hello problem in miflash, reboot your computer
I don't need to do that but desinstall qualcomm drivers and reinstall with new one inside miflash 2016 can help
Click to expand...
Click to collapse
Man, you solved my problem. After going from fastboot mode to EDL mode I just downloaded the latest version of MIFLASH and there it is! Problem solved.
Thx!
Hi,
Today I just installed a custom ROM for my Zuk Z2 PRO. This tutorial is how I did it.
I get many ressources from this forum and I thank orignal authors.
Big thanks to meister for his guide : https://forum.xda-developers.com/zuk-z2-pro/how-to/zuk-z2-pro-guide-to-everything-ota-t3562099
And big thanks to m_atze for his guide : https://forum.xda-developers.com/zuk-z2-pro/how-to/howto-flash-stock-rom-t3435109
More info on this ROM : https://forum.xda-developers.com/zuk-z2-pro/development/rom-share-lr-team-zuk-z2row-z2-pro-t3567710
Backup your data before processing the flash, in order to avoid loss of data!
Flashing / rooting and install custom ROM could brick your device ! You're the only responsible on what you're doing. This guide is how I did it and I'm not responsible if you're messing up your device
Unlock bootloader (step 3) will void Lenovo warranty
Antutu Score : 143050
Summary :
Step 1 : Prepare environment
Step 2 : Install ZUI 2.5.x (recommended before installing Nougat custom ROM)
Step 3 : Unlock bootloader (to be able to boot on TWRP)
Step 4 : Boot on TWRP to root the phone
Step 5 : Make a Nandroid backup
Step 6 : Install TWRP
Step 7 : Install a custom ROM with TWRP
Step 8 : Install Gapps (google apps)
Step 1 : Prepare environment
Create a directory where you're gona extract download files (avoid space in the directory path).
Download : adb and fastboot from google
Extract it on your previous created directory.
Download usb drivers and install it
Enable developer mode in your Z2 PRO (link if your don't know how to do it)
Connect your phone on your computer
On the directory C:/yourDirectoryPath/platform-tools maintains shift + rigth click and "Open command window here"
Type adb devices
If your see a line below "List of devices attached" your adb is OK
Note the number somewhere, it's your device serial number.
On the phone type *#06# and note somewhere IMEI numbers in case something went wrong during flashing
Step 2 : Install ZUI 2.5.x (recommended before installing Nougat custom ROM)
For this part I use the m_atze tutorial that you can find here. Check it for me detailed steps.
If you are on windows 8, 8.1 or 10, you have to disable driver verification (some people didn't disable driver verification and it works as well)
For windows 10 with anniversary update : you just have to run a cmd as admin and enter bcdedit -set TESTSIGNING ON then reboot your computer (your windows will be in test mode)
For other cases check this link
Then
Download QPST flashtool
Install QPST flashtool and reboot your computer
Download and extract ZUI ROM 2.5.x (you maybe need to rename the directory where the ROM is because it could be too big)
Launch QFIL application as administrator
Go to Configuration -> FireHostConfiguration. 1-change device type to UFS. 2-check reset after download checkbox
Click on "Load content" and browse the contents.xml from the ZUI ROM 2.5.x extracted files
On the adb console you opened earlier, enter adb reboot edl
The QFIL page should look like this
Click on "Download content" to flash your phone
The final screen should like this
If any problem, there is an FAQ
Your phone is gonna reboot, congratulation, you're flashed your phone with ZUI 2.5.x ROM.
Once the phone boots up it will be in Chinese again. To get your phone back in English :
On the welcome screen tap the bottom of the screen below the highlighted blue text to skip the ZUK login.
To change the language back to English go to Settings.
In the third section choose the last entry. "Advanced Settings" (the gears symbol).
Choose the 2nd menu item.
Choose the first menu item and select English.
Now check update and install it if needed trough this app. If the check is green, it's ok.
Re-enable developer mode and debugging
Step 3 : Unlock bootloader (to be able to boot on TWRP)
This step is almost a copy past of section 2 of meister guide
This step gonna void your Lenovo warranty and wipe your data
Step 3.1 : Get the unlock bootloader from Lenovo
In order to unlock the bootloader you will need to got the zuk website, where you need to register first before you can request to unlock the bootloader.
So go here : https://passport.zuk.com/wauthen3/wauth/jsp/register.jsp (use google translate)
Select Email Registration (upper right corner) and fill in the required data
You will receive an Email with a confirmation link.
Now that you are registered, log in and than go to http://developer.zuk.com/bootloader (use google translate)
Click on Carry On.
On the next page select your phone type Z2 Pro.
Enter your serial number (8 digits) (you can find it on Settings -> About -> Status. If your serial is not 8 digit, add 0 to the end to make a 8 digit number)
Enter an email address where to send the unlock image. It seems that the email address here has to follow some rules. ([email protected] or @Web.net seems to work. A domain name with a hyphen (-) seems to cause problems, i use a @hotmail.com mail adresse and it worked)
Check the 2 check boxes and click SUBMIT
If successful you get a message that the image has been sent to your email address. No message means something went wrong. Likely the email address was not approved.
Save the email attachment from ZUK you requested earlier (named unlock_bootloader.img) into C:/yourDirectoryPath/platform-tools/ (next to adb.exe)
Step 3.2 : Unlock bootloader
On adb console enter adb devices to check if your device is still connected
Next enter adb reboot bootloader and your phone gonna reboot in bootloader mode
Next enterfastboot -i 0x2b4c flash unlock unlock_bootloader.img (if you got error "target did not report max-download-size" change from usb 3.0 to usb 2.0 port and / or try to turn on "enable_usb_2.0" via
Developer Options)
You should see
Code:
target reported max download size of 1610612736 bytes
sending 'unlock' (0 KB)...
OKAY [ 0.031s]
writing 'unlock'...
OKAY [ 0.063s]
finished. total time: 0.094s
Then enter fastboot -i 0x2b4c oem unlock-go
You should see
Code:
...
OKAY [ 0.031s]
finished. total time: 0.031s
You phone is gonna reboot (or reboot it manually)
Change the phone language to english and re enable debugging.
Step 4 : Boot on TWRP to root the phone
Download TWRP 3.1 for Zuk Z2 PRO here and extrat TWRP..... .img next to adb.exe in platform-tools folder
Download SuperSu here
Copy paste SuperSu zip file in your phone internal storage
In adb cmd enter adb reboot bootloader
Then enter fastboot -i 0x2b4c boot TWRP3.1.0.0_ZUK_Z2_pro.img to boot in TWRP image
Click on "Keep read only"
Go to install and browse to SuperSu zip.
Swipe to install
When installation is finished, reboot your phone (it may reboot many times)
Good job, your phone is now rooted !
Step 5 : Make a Nandroid backup
In adb cmd enter adb reboot bootloader
Then enter fastboot -i 0x2b4c boot TWRP3.1.0.0_ZUK_Z2_pro.img to boot in TWRP image
Go in backup and check all checkbox
Swipe to backup
Reboot the phone
From your computer browse your phone internal memory and copy your backup from TWRP/Backup/XXXXX to a directory in your computer
Step 6 : Install TWRP
In adb cmd enter adb reboot bootloader
Then fastboot flash recovery TWRP3.1.0.0_ZUK_Z2_pro.img to install TWRP on your phone
Then fastboot reboot
Then adb reboot bootloader
Then with volume keys select Recovery Mode and enter in Recovery Mode by pushing power key
TWRP will start
Reboot your phone
Step 7 : Install a custom ROM with TWRP
Download ROM from https://uploadfiles.io/55ffa
Copy paste ROM zip file in your phone internal storage
In adb cmd enter adb reboot bootloader
Then with volume keys select Recovery Mode and enter in Recovery Mode by pushing power key
Click Wipe and swipe to wipe. Do NOT reboot your phone.
Go back in TWRP main menu and click Install. Browse the ROM zip file
Swipe to install
Reboot your phone
When your phone reboot, it's in chinese. Click on the texte in the right bottom corner and then select your language.
During the phone configuration, do not connect wifi (in my case the phone configuration crashed when I connected to a wifi)
When you finished phone configuration reboot to get notification in your language
Step 8 : Install Gapps (google apps)
Download Gapps from https://forum.xda-developers.com/android/software/gapps-dynamic-gapps-t3487192
Copy the zip file in your phone
Reboot in TWRP
Install Gapps through TWRP
Reboot your phone
At this point my Google Play Services crashed each reboot. So needed to
Reboot in TWRP
Wipe cache
Now it works !
You can install other ROM with this method but I only tested with this one.
Enjoy
First of all, thank you for your help.
I followed this tutorial from start to finish without encountering any unexpected events. It is rare to say so!
Small points:
Step 1:
*- Think of connecting the phone before the command "adb devices", it's stupid but I had not done it!
Step 2:
*- I did not need to change my driver settings on Windows 10.
*- I had to run the QFIL application as an administrator.
*- I had to rename the directory where the ROM was because the name was too big.
Step 3.1:
*- I have a serial number on 7 characters, you must add "0" at the end to make 8 characters.
*- My Gmail address worked smoothly.
Step 4:
*- The SuperSU link did not work, I took this one: http://downloadmirror.co/Utz/UPDATE-SuperSU-v2.79-20161211114519.zip
*- Some reboot at home also, it seems to be normal.
Step 7:
*- I took the ROM "Resurrection Remix", no problem with another ROM.
Step 8:
*- I also had a crash of Google apps, I also did a wipe and it works now. It looks normal too.
Thank you again for your help!
Glade I could help !
Thanks for your feedback, I'm gonna update the tutorial
Hi,
great tutorial, thank you!
Step 6 : Install TWRP - I'm stuck though, as my PC still does not recognize device on fastboot without -i 0x2b4c...
so should I use instead of
Then fastboot flash recovery TWRP3.1.0.0_ZUK_Z2_pro.img to install TWRP on your phone
Then fastboot reboot
Click to expand...
Click to collapse
the -i option ?
Then fastboot -i 0x2b4c flash recovery TWRP3.1.0.0_ZUK_Z2_pro.img to install TWRP on your phone
Then fastboot -i 0x2b4c reboot
Click to expand...
Click to collapse
?
... edit, yes that worked ...
lxlx said:
... edit, yes that worked ...
Click to expand...
Click to collapse
Great ! Good to know
Step 3.1 : Get the unlock bootloader from Lenovo
- gmail works
- did not work to get the bootloader with google translater . had to do it in Chinese, but knew the steps since i tried it with translation first
zwat said:
Step 3.1 : Get the unlock bootloader from Lenovo
- gmail works
- did not work to get the bootloader with google translater . had to do it in Chinese, but knew the steps since i tried it with translation first
Click to expand...
Click to collapse
Thanks for the feedback, I updated the tuto.
Thank you for this tutorial, it worked like a charm!
I'm currently on ZUI 2.5.x. Can I go straight to official MK60.1 using this guide?
Or should I downgrade to ZUI 2.3.x first
dommels said:
I'm currently on ZUI 2.5.x. Can I go straight to official MK60.1 using this guide?
Or should I downgrade to ZUI 2.3.x first
Click to expand...
Click to collapse
I don't know sorry :/
Maybe downgrade to 2.3.x is more secured...
For my information, why do you want to install the MK60.1 ?
Bluud said:
I don't know sorry :/
Maybe downgrade to 2.3.x is more secured...
Click to expand...
Click to collapse
Just went from stock 2.5x to MK60.1 without issues, thanks!
For my information, why do you want to install the MK60.1 ?
Click to expand...
Click to collapse
So far it's the only stable official release from Mokee.
Mk60.1 have exactly the same bugs like Mk71.1. so no need to use mk60.1. mk71.1 is pretty stable btw.
So far quite happy running Mokee. Is there an easy way to root as well?
dommels said:
So far quite happy running Mokee. Is there an easy way to root as well?
Click to expand...
Click to collapse
Mokee was quite good.
Yesterday I installed this ROM : https://forum.xda-developers.com/zu...tom-rom-zuk-z2pro-resurrection-remix-t3579113
I prefer this ROM because you can custom it in many ways.
Since yesterday it's stable.
Question
Bluud said:
Mokee was quite good.
Yesterday I installed this ROM : https://forum.xda-developers.com/zu...tom-rom-zuk-z2pro-resurrection-remix-t3579113
I prefer this ROM because you can custom it in many ways.
Since yesterday it's stable.
Click to expand...
Click to collapse
It's the same tutorial?
Yes
Bluud said:
Hi,
Today I just installed a custom ROM for my Zuk Z2 PRO. This tutorial is how I did it.
I get many ressources from this forum and I thank orignal authors.
Big thanks to meister for his guide : https://forum.xda-developers.com/zuk-z2-pro/how-to/zuk-z2-pro-guide-to-everything-ota-t3562099
And big thanks to m_atze for his guide : https://forum.xda-developers.com/zuk-z2-pro/how-to/howto-flash-stock-rom-t3435109
More info on this ROM : https://forum.xda-developers.com/zuk-z2-pro/development/rom-share-lr-team-zuk-z2row-z2-pro-t3567710
Backup your data before processing the flash, in order to avoid loss of data!
Flashing / rooting and install custom ROM could brick your device ! You're the only responsible on what you're doing. This guide is how I did it and I'm not responsible if you're messing up your device
Unlock bootloader (step 3) will void Lenovo warranty
Antutu Score : 143050
Summary :
Step 1 : Prepare environment
Step 2 : Install ZUI 2.5.x (recommended before installing Nougat custom ROM)
Step 3 : Unlock bootloader (to be able to boot on TWRP)
Step 4 : Boot on TWRP to root the phone
Step 5 : Make a Nandroid backup
Step 6 : Install TWRP
Step 7 : Install a custom ROM with TWRP
Step 8 : Install Gapps (google apps)
Step 1 : Prepare environment
Create a directory where you're gona extract download files (avoid space in the directory path).
Download : adb and fastboot from google
Extract it on your previous created directory.
Download usb drivers and install it
Enable developer mode in your Z2 PRO (link if your don't know how to do it)
Connect your phone on your computer
On the directory C:/yourDirectoryPath/platform-tools maintains shift + rigth click and "Open command window here"
Type adb devices
If your see a line below "List of devices attached" your adb is OK
Note the number somewhere, it's your device serial number.
On the phone type *#06# and note somewhere IMEI numbers in case something went wrong during flashing
Step 2 : Install ZUI 2.5.x (recommended before installing Nougat custom ROM)
For this part I use the m_atze tutorial that you can find here. Check it for me detailed steps.
If you are on windows 8, 8.1 or 10, you have to disable driver verification (some people didn't disable driver verification and it works as well)
For windows 10 with anniversary update : you just have to run a cmd as admin and enter bcdedit -set TESTSIGNING ON then reboot your computer (your windows will be in test mode)
For other cases check this link
Then
Download QPST flashtool
Install QPST flashtool and reboot your computer
Download and extract ZUI ROM 2.5.x (you maybe need to rename the directory where the ROM is because it could be too big)
Launch QFIL application as administrator
Go to Configuration -> FireHostConfiguration. 1-change device type to UFS. 2-check reset after download checkbox
Click on "Load content" and browse the contents.xml from the ZUI ROM 2.5.x extracted files
On the adb console you opened earlier, enter adb reboot edl
The QFIL page should look like this
Click on "Download content" to flash your phone
The final screen should like this
If any problem, there is an FAQ
Your phone is gonna reboot, congratulation, you're flashed your phone with ZUI 2.5.x ROM.
Once the phone boots up it will be in Chinese again. To get your phone back in English :
On the welcome screen tap the bottom of the screen below the highlighted blue text to skip the ZUK login.
To change the language back to English go to Settings.
In the third section choose the last entry. "Advanced Settings" (the gears symbol).
Choose the 2nd menu item.
Choose the first menu item and select English.
Now check update and install it if needed trough this app. If the check is green, it's ok.
Re-enable developer mode and debugging
Step 3 : Unlock bootloader (to be able to boot on TWRP)
This step is almost a copy past of section 2 of meister guide
This step gonna void your Lenovo warranty and wipe your data
Step 3.1 : Get the unlock bootloader from Lenovo
In order to unlock the bootloader you will need to got the zuk website, where you need to register first before you can request to unlock the bootloader.
So go here : https://passport.zuk.com/wauthen3/wauth/jsp/register.jsp (use google translate)
Select Email Registration (upper right corner) and fill in the required data
You will receive an Email with a confirmation link.
Now that you are registered, log in and than go to http://developer.zuk.com/bootloader (use google translate)
Click on Carry On.
On the next page select your phone type Z2 Pro.
Enter your serial number (8 digits) (you can find it on Settings -> About -> Status. If your serial is not 8 digit, add 0 to the end to make a 8 digit number)
Enter an email address where to send the unlock image. It seems that the email address here has to follow some rules. ([email protected] or @Web.net seems to work. A domain name with a hyphen (-) seems to cause problems, i use a @hotmail.com mail adresse and it worked)
Check the 2 check boxes and click SUBMIT
If successful you get a message that the image has been sent to your email address. No message means something went wrong. Likely the email address was not approved.
Save the email attachment from ZUK you requested earlier (named unlock_bootloader.img) into C:/yourDirectoryPath/platform-tools/ (next to adb.exe)
Step 3.2 : Unlock bootloader
On adb console enter adb devices to check if your device is still connected
Next enter adb reboot bootloader and your phone gonna reboot in bootloader mode
Next enterfastboot -i 0x2b4c flash unlock unlock_bootloader.img (if you got error "target did not report max-download-size" change from usb 3.0 to usb 2.0 port and / or try to turn on "enable_usb_2.0" via
Developer Options)
You should see
Then enter fastboot -i 0x2b4c oem unlock-go
You should see
You phone is gonna reboot (or reboot it manually)
Change the phone language to english and re enable debugging.
Step 4 : Boot on TWRP to root the phone
Download TWRP 3.1 for Zuk Z2 PRO here and extrat TWRP..... .img next to adb.exe in platform-tools folder
Download SuperSu here
Copy paste SuperSu zip file in your phone internal storage
In adb cmd enter adb reboot bootloader
Then enter fastboot -i 0x2b4c boot TWRP3.1.0.0_ZUK_Z2_pro.img to boot in TWRP image
Click on "Keep read only"
Go to install and browse to SuperSu zip.
Swipe to install
When installation is finished, reboot your phone (it may reboot many times)
Good job, your phone is now rooted !
Step 5 : Make a Nandroid backup
In adb cmd enter adb reboot bootloader
Then enter fastboot -i 0x2b4c boot TWRP3.1.0.0_ZUK_Z2_pro.img to boot in TWRP image
Go in backup and check all checkbox
Swipe to backup
Reboot the phone
From your computer browse your phone internal memory and copy your backup from TWRP/Backup/XXXXX to a directory in your computer
Step 6 : Install TWRP
In adb cmd enter adb reboot bootloader
Then fastboot flash recovery TWRP3.1.0.0_ZUK_Z2_pro.img to install TWRP on your phone
Then fastboot reboot
Then adb reboot bootloader
Then with volume keys select Recovery Mode and enter in Recovery Mode by pushing power key
TWRP will start
Reboot your phone
Step 7 : Install a custom ROM with TWRP
Download ROM from https://uploadfiles.io/55ffa
Copy paste ROM zip file in your phone internal storage
In adb cmd enter adb reboot bootloader
Then with volume keys select Recovery Mode and enter in Recovery Mode by pushing power key
Click Wipe and swipe to wipe. Do NOT reboot your phone.
Go back in TWRP main menu and click Install. Browse the ROM zip file
Swipe to install
Reboot your phone
When your phone reboot, it's in chinese. Click on the texte in the right bottom corner and then select your language.
During the phone configuration, do not connect wifi (in my case the phone configuration crashed when I connected to a wifi)
When you finished phone configuration reboot to get notification in your language
Step 8 : Install Gapps (google apps)
Download Gapps from https://forum.xda-developers.com/android/software/gapps-dynamic-gapps-t3487192
Copy the zip file in your phone
Reboot in TWRP
Install Gapps through TWRP
Reboot your phone
At this point my Google Play Services crashed each reboot. So needed to
Reboot in TWRP
Wipe cache
Now it works !
You can install other ROM with this method but I only tested with this one.
Enjoy
Click to expand...
Click to collapse
Does it works on Zuk Z2?
dommels said:
I'm currently on ZUI 2.5.x. Can I go straight to official MK60.1 using this guide?
Or should I downgrade to ZUI 2.3.x first
Click to expand...
Click to collapse
You can go straight to the latest RR rom without downgrade, so I guess you can do this with MK60 also. But why do you want that...?
Sendt fra min ZUK Z2121 med Tapatalk
Pendragon2000 said:
Does it works on Zuk Z2?
Click to expand...
Click to collapse
You can use this tutorial BUT you need to take a Z2 ROM and a Z2 TWRP.
Check on xda Z2 topics
accelerometer/gyroscope BUG can`t play any game
Hi !
I might have erased the boot partion. I still got the unlocked bootloader screen, and can still get in fastboot, but that's it. I can't boot in TWRP. I've tried to flash the boot.img from the stock zip, but it doesn't work... anyway to fix this ? It's the A2017G model. All i need is to get into TWRP.
Exnocte said:
Hi !
I might have erased the boot partion. I still got the unlocked bootloader screen, and can still get in fastboot, but that's it. I can't boot in TWRP. I've tried to flash the boot.img from the stock zip, but it doesn't work... anyway to fix this ? It's the A2017G model. All i need is to get into TWRP.
Click to expand...
Click to collapse
can't you flash recovery? I think someone made a flashable TWRP somewhere
Choose an username... said:
can't you flash recovery? I think someone made a flashable TWRP somewhere
Click to expand...
Click to collapse
I've tried to flash TWRP several time, but it won't boot...
Exnocte said:
I've tried to flash TWRP several time, but it won't boot...
Click to expand...
Click to collapse
you can try getting into EDL and using MiFlash to flash one of the zips on the Russian page 4pda. Go to the debrick page (the one with the phone carnage pictures inside), find the links for the chinese full recovery package. it will get you to the 4pda page. from there find a package that suits your needs (there is one with aboot and fbop) and flaah with MiFlash
Otherwise download the full B10 recovery package and flash it with MiFlash. you won't lose data but it might conflict if you were on Nougat
I'm in this situation for some days...
No EDL, No recovery, only fastboot and FTU modes are accessible.
And we can't flash via Miflash. It sees the phone only in fastboot mode, and can't flash it.
@op : 2 ways to recover :
- Test points method to force EDL and flash via miflash
- Return to ZTE
If any1 has other solutions ...
FYI : My tests so far :
- Flash boot / reboot / flash recovery : Stuck on ZTE logo, red led on permanently
- Hot load recovery (fastboot boot twrp.img): Command unknown
- Format userdata/cache : No work
- Flash via Miflash in fastboot : "Can't find Eraseall except Data.bat"
- Change drivers by some others one : No luck
Sn8K said:
I'm in this situation for some days...
No EDL, No recovery, only fastboot and FTU modes are accessible.
And we can't flash via Miflash. It sees the phone only in fastboot mode, and can't flash it.
@op : 2 ways to recover :
- Test points method to force EDL and flash via miflash
- Return to ZTE
If any1 has other solutions ...
FYI : My tests so far :
- Flash boot / reboot / flash recovery : Stuck on ZTE logo, red led on permanently
- Hot load recovery (fastboot boot twrp.img): Command unknown
- Format userdata/cache : No work
- Flash via Miflash in fastboot : "Can't find Eraseall except Data.bat"
- Change drivers by some others one : No luck
Click to expand...
Click to collapse
I don't know what you mean with FTU mode, but if FTM is meant you should be able to send a "reboot edl" command to activate the EDL mode.
tron1 said:
I don't know what you mean with FTU mode, but if FTM is meant you should be able to send a "reboot edl" command to activate the EDL mode.
Click to expand...
Click to collapse
Humm ... Early morning for me ... i meant DFU. Vol+ & - while powering the phone Result on a black screen, and driver is recognized as Handset Diagnostic Driver (DFU COm port x)
Ind in that kind of brick, FTM is not accessible either.
tron1 said:
I don't know what you mean with FTU mode, but if FTM is meant you should be able to send a "reboot edl" command to activate the EDL mode.
Click to expand...
Click to collapse
Yeah that pretty much sums it up. If you get ZTE handset diagnostic driver on Ports COM&LPT you'll have to take your device apart and use the test point. If it is recognized as Qualcomm HS-USB QDLoader 9008 it means that you're on EDL. I'd reccomend trying to use miflash like i described, if it doesn't work return it or take it apart
Maybe a bit late for a reply, but I was able to get out of a similar situation (from DFU) by holding power and volume down for a long time. That got me to FTM and then I could reboot into edl via "adb reboot edl". Then I used the Axon7toolkit to flash fastboot and from there I could get to twrp and back in business. Any questions, let me know.
@Piet : How long for the PWR+DWN ? I've tried for something like 40/45 seconds, without success.
Sn8K said:
@Piet : How long for the PWR+DWN ? I've tried for something like 40/45 seconds, without success.
Click to expand...
Click to collapse
From what I read you have to let the device discharge totally, then you can get ftm. I had my battery fully charged when i bricked so i just did the 4th categ unbricking process
Can someone help me. I tried the boot loader unlock with "Axon7 EDL Tool"
1) I flashed the recovery (TWRP).
2. then I started the boot loader unlock.
Now start it in the following menu. I can't get out of there.
hope someone can help me.
Have an Axon 7, German Edition (A2017G) Android 8.0.0
It show me:
-----------------------------------------------------------------------------
START
----------------------------------------------------------------------------
FASTBOOT MODE (in red font)
PRODUCT _NAME - AILSA_II
VARIANT - MTP eMMC
BOOTLOADER VERSION -
SERIAL NUMBER - fc0b748d
SECURE BOOT - enabled
DEVICE STATE - locked (in red font)
I can choose with the volume buttons
"START" --> it reboot in the self menu
"Restart bootloader" --> it reboot in the self menu
"Recovery mode" --> it boot into black screen. (Only way out is disconnect the battery and restart. But this is the only where axon EDL tool detect the phone.)
"Power off" --> it Shutdown
My goal is to use a custom rom.
for those who manage to solve the problem with me, I transfer 10Euro via Paypal. I hope someone can help me
its the wrong way
1. you cant flash a working twrp with locked bootloader
2. you need to downgrade to marshmallow to unlock bootloader via fastboot
skdubg said:
its the wrong way
1. you cant flash a working twrp with locked bootloader
2. you need to downgrade to marshmallow to unlock bootloader via fastboot
Click to expand...
Click to collapse
I've now had to experience that too. can you show me \ explain how I can get out of this situation and make it work.