Hi,
I have a legend and everything was fine but after I tried to install the legend CM6RC2 BUILD 66 Rom from cynogenmod it would not reboot any more and I only saw the android robot. After that I tried to get into recovery but that's not possible anymore.
I al ready tried modaco's guide but I didn't understand.
Does anyone know how I can unbrick my usb to be able to get into recovery to install another Rom?
Thanks in advance!
you must unbrick your USB by following this step ( nobody can do it for you... ) :
http://android.modaco.com/content/h...com/309961/usb-brick-rickrolled-b0rked-fixed/
usb drivers
I tried to understand this guide but I don't understand this part:
"Move this to /data/ , and flash the modified image using:
"/data/flash_image misc /data/mtd0.img"
You can move both mtd0.img and flash_image by putting it on your sdcard, and issueing the following command in a terminal emulator:
'cat /sdcard/flash_image > /data/flash_image'
'cat /sdcard/mtd0.img > /data/mtd0.img'
You might have to do 'chmod u+x /data/flash_image' before you run the commands (or chmod 755 /data/flash_image)"
and also i cant do step one because device is not found
you must do this after starting your device.
Before starting your device you must mount you sdcard with 'fastboot oem enableqxdm 0' under fastboot mode ( device off : hold power button + volume down )
after your device started, go to market and install Connecbot.
Start connectbot, select ( at the bottom ) Local in place of ssh , and type 'su' 2 times.
If you get permission denied, do what he's done in his PS http://android.modaco.com/index.php?s=&showtopic=309961&view=findpost&p=1335813
i can type su as many times as i want and nothing happens.
YES i typed it in local.I re-installed htc sync and still my pc cant recognize my phone.
what should i do?
you type SU on your device ? ( in connectbot )
if you see a # at the begining of the line , you are logged as root , just follow the unbrink step
ilos said:
you must do this after starting your device.
Before starting your device you must mount you sdcard with 'fastboot oem enableqxdm 0' under fastboot mode ( device off : hold power button + volume down )
after your device started, go to market and install Connecbot.
Start connectbot, select ( at the bottom ) Local in place of ssh , and type 'su' 2 times.
If you get permission denied, do what he's done in his PS http://android.modaco.com/index.php?s=&showtopic=309961&view=findpost&p=1335813
Click to expand...
Click to collapse
could you explain it for me ? how to do fastboot oem enableqxdm 0 in fastboot.....
you must have android sdk installed to use adb
When you have installed android sdk, go to tools directory, open a command prompt ( MSDOS ) , type 'adb shell' and 'fastboot oem enableqxdm 0'
after that, just reboot your device.
Look that for adb : http://forum.xda-developers.com/showthread.php?t=517874
ilos said:
you must have android sdk installed to use adb
When you have installed android sdk, go to tools directory, open a command prompt ( MSDOS ) , type 'adb shell' and 'fastboot oem enableqxdm 0'
after that, just reboot your device.
Look that for adb : http://forum.xda-developers.com/showthread.php?t=517874
Click to expand...
Click to collapse
what should i do after i reboot my device?
Win7 said he cant recognize the usb device.
is this good? dont you have the drivers or something?
zorro12010 said:
what should i do after i reboot my device?
Win7 said he cant recognize the usb device.
is this good? dont you have the drivers or something?
Click to expand...
Click to collapse
see post #6
to be simple :
only the device will see your sdcard.. not your computer... all steps for unbrick must be done on the phone except the fastboot command
i also tried typing SU and sl
and instead of # it says sh-3.2#
so you are logged as root
just to be sure type : ls not sl
you will see same thing like my screenshoot posted early
now follow unbrick command
ilos said:
you must have android sdk installed to use adb
when you have installed android sdk, go to tools directory, open a command prompt ( msdos ) , type 'adb shell' and 'fastboot oem enableqxdm 0'
after that, just reboot your device.
Look that for adb : http://forum.xda-developers.com/showthread.php?t=517874
Click to expand...
Click to collapse
thousand thanks......for you man.....i made it...........
congratulations !!!
Hi ..
I do not speak English well ،But I'm trying to understand
Please have the same problem, and tried to solve, but to no avail
at the above link in comment # 14
Thanks to Google Translate
Samsung Galaxy Note 4 – Verizon Wireless – Permanent Root Guide
Disclaimer: I am not 100% sure on what everything here does. These are just a reproduction of the exact steps, files, and programs I used to achieve successful permanent root on my Verizon Note 4 running 5.1.1 (Build Version: BPA1).
I collected all the apps, files, and this guide into one location. You can source these files yourself or you can use the ones I included.
Download Guide & ALL Required Files
Google Drive
Required Files & Programs
Included in download
ADB – minimal_adb_fastboot_v1.3.1_setup.exe
Odin – Odin3 v3.09.exe & Odin3.ini
Samsung Mobile Phone Drivers (Windows Only) – SAMSUNG_USB_Driver_for_Mobile_Phones.exe
TWRP – twrp-3.0.2-0-trltevzw.tar.md5
SuperSU – BETA-SuperSU-v2.71-20160331103524.zip
Bootloader Unlock – samsung_unlock_n4-fix
Kingroot (Temporary Root App) - NewKingrootV4.85_C139_B255_en_release_2016_03_29_105203.apk
Not included in download. These files/programs you must find and download.
Super-Sume Pro – On Google Play Store ($3.99)
https://play.google.com/store/apps/details?id=darkslide.com.supersumepro&hl=en
eMMC Brickbug Check – On Google Play Store (Free)
https://play.google.com/store/apps/details?id=net.vinagre.android.emmc_check&hl=en
Root Checker – On Google Play Store (Free)
https://play.google.com/store/apps/details?id=com.joeykrim.rootcheck&hl=en
Required Tools/Parts/Devices
Samsung Galaxy Note 4 on Verizon updated to 5.1.1 (BPA1)
PC with Windows
Micro USB Cable
MicroSD Card
MicroSD Card Reader/USB Adapter (To Format MicroSD Card)
Step 0: Install Note 4 USB Drivers
If you haven’t done this before at some point it’s as simple as opening the Samsung Mobile Phone Drivers included with this guide.
Step 1: Backup All The Things!
Backup anything that is important to you. You should regularly be doing this anyway.
If you use Two Factor Authentication such as Google Authenticator or Lastpass’ Authenticator I highly suggest you disable this before proceeding as we will be factory resetting your device potentially locking you out of some accounts or making them significantly more difficult to recover access too.
Step 1.5: Disable Encryption
Disable both device and sd card encryption.
Step 2: Factory Reset
Factory Reset your phone and format the sd card.
Step 3: Preparing The Device
Follow the directions below to navigate your device’s settings’ menus to change the required settings.
Settings > Security > Reactivation Lock | Disabled! This is very important!
Settings > Security > Unknown sources | Enabled
Settings > Developer Options > USB debugging | Enabled
Settings > Developer Options > Verify app via USB | Enabled
Move the file NewKingrootV4.85_C139_B255_en_release_2016_03_29_105203.apk included with this guide to your phone’s download folder. When plugged in with a usb cable to your computer it’s usually located at “SAMSUNG-SM-N910V\Phone\Download”.
Step 4: Preparing Your PC
Run minimal_adb_fastboot_v1.3.1_setup.exe included with this guide.
Pay attention to what directory this installs to. It’s usually C:\Program Files (x86)\Minimal ADB and Fastboot.
Step 4.1: Copying Files
samsung_unlock_n4-fix & BETA-SuperSU-v2.71-20160331103524.zip included with this guide need to be copied (the actual files, don’t create shortcuts) to the install folder for ADB (Usually C:\Program Files (x86)\Minimal ADB and Fastboot.). These files must be in the same folder as adb.exe
Step 5: ADB & The Unlocker
Your phone should have been connected already with a usb cable to your computer. We need to verify your phone is found by adb. Open adb.exe located in the folder from Step 4. Once the window (cmd.exe) opens a command line interface saying
Code:
Microsoft Windows [Version 10.0.10586]
(c) 2015 Microsoft Corporation. All rights reserved.
C:\Program Files (x86)\Minimal ADB and Fastboot>
Type in the following command: adb devices
Which should return the following
Code:
List of devices attached
123a12ab device
The 123a12ab is made up. Yours will be specific to your device. If you see something listed like the above adb is working. Now on to the next command to move the unlocker to the phone.
Step 5.1: Send Unlocker to Phone with adb
Type the following command: adb push samsung_unlock_n4-fix /data/local/tmp/
If you get an error it’s because you a) typo b) file isn’t in the folder with adb.exe c) your phone is locked/screen is off d) usb debugging isn’t turned on in settings > developer options.
Step 6: Kingroot For Temp Root
Keep the adb window accessible you will need to be able to switch to it and enter in the commands below quickly as temp root is unstable. Be ready to copy or type them quickly.
On your phone open the app My Files. Click on Device storage > Download > NewKingrootV4.85_C139_B255_en_release_2016_03_29_105203.apk to install Kingroot. After it installs click close, not open. Close all running apps.
Step 6.5: Work Quick With Precision
Open Root Checker so it’s ready to go. Don’t Check yet. Hit the home button and then open Kingroot. In Kingroot scroll down and click the button to start temp root. If you don’t see root successful after a minute or two or four you may need to restart your phone and repeat the process of opening root checker and then Kingroot.
Once you do see successful root click the multi tasking button on the phone to switch over to root checker. Temp root is buggy and may crash. If it does repeat this process again with getting temp root and opening the apps in the correct order.
If you make it into root checker via the multi tasking button it will ask you to grant it root access, click yes, check for root. If it says you have root go to the adb window and type these comamnds in quickly before temp root causes your phone to crash.
adb shell
su
cd /data/local/tmp/
chmod 777 samsung_unlock_n4-fix
chown root.root samsung_unlock_n4-fix
./samsung_unlock_n4-fix
The device will reboot. After reboot, shut the phone down by removing only the battery and usb cable.
Step 7: One More Time
Put the battery and cable back in and turn the phone back on. Now repeat Step 5 & 6.5 but skip Step 5.1 and Step 6. After you send the last adb command and it reboots again pull the battery, sd card, and usb cable. Keep the sd card out! Until you plug it into your computer and format it. It doesn’t matter when you format it if it’s not reporting the correct size. This will be fixed by putting it back into your phone AFTER you format it on your pc and formatting it on the phone.
Step 8: Temp Root A Third Time
If it isn’t already installed go ahead and install Super-Sume Pro.
Close all apps.
Open Super-Sume Pro, click the home button, and open Kingroot.
In Kingroot apply temp root. Click the multi tasking button and switch over to Super-Sume Pro. When it asks for Root grant it. Click the big blue button and follow the instructions. It may take a minute or two. Shut the phone down after it’s done.
Step 9: Odin
Turn the phone on and enter download mode by pressing and holding volume down + power + home. When it’s comes to the screen and says “Downloading” you’re ready to proceed. Open the file included with this guide Odin3 v3.09.exe. In Odin3 where it says Files [Download] click AP and navigate to the folder with this guide and select/open the file twrp-3.0.2-0-trltevzw.tar.md5 and then click Start. Once it finishes it will enter a black screen to reboot. Press and hold these buttons immediately to enter TWRP , volume up + power + home.
Step 10: TWRP & ADB Sideloading
Swipe to allow changes in TWRP. Click Advanced and then ADB Sideload. Swipe to start adb. On your computer open adb.exe from Step 4. On the command line interface in adb.exe
Type the following command: adb devices
Verify your device is there and says sideload.
Type the following command: adb sideload BETA-SuperSU-v2.71-20160331103524.zip
The phone will install Super SU, after it is finished we will install the new Kernel before rebooting.
You may need to re-enter ADB Sideload on the phone.
Type the following command: adb devices
Verify your device is there and says sideload.
Type the following command: adb sideload Emotion-TW-5.1.1-nightly-r21-RC1-SM-N910P.zip
Reboot the phone.
If boots into 5.1.1 open root checker and verify you have root.
Information Sources: felixtaf, ryanbg, kingroot, twrp, emotion, ibowtoandroid, shimp208, & urgodfather
I also posted this on reddit. https://www.reddit.com/r/galaxynote4/comments/4f8cgc/guide_a_noobs_guide_to_permanent_rootunlocked/
It's missing kernel part
Enviado desde mi SM-N910V mediante Tapatalk
Thank you for posting this so clearly! Would Samsung "smart switch" be a viable tool to use for backing up all my apps/app data, home screen setup, etc. before rooting, and still work to import the data after rooting?
EdrickMG said:
It's missing kernel part
Enviado desde mi SM-N910V mediante Tapatalk
Click to expand...
Click to collapse
That kernel flash is optional from what I've seen. That's just what people have been wanting on their phones
Robots_Never_Die said:
Samsung Galaxy Note 4 – Verizon Wireless – Permanent Root Guide
Disclaimer: I am not 100% sure on what everything here does. These are just a reproduction of the exact steps, files, and programs I used to achieve successful permanent root on my Verizon Note 4 running 5.1.1 (Build Version: BPA1).
I collected all the apps, files, and this guide into one location. You can source these files yourself or you can use the ones I included.
Download Guide & ALL Required Files
Google Drive
Torrent File
Torrent Magnet Link
Torrent is hosted on 10gbit/s seedbox.
Required Files & Programs
Included in download
ADB – minimal_adb_fastboot_v1.3.1_setup.exe
Odin – Odin3 v3.09.exe & Odin3.ini
Samsung Mobile Phone Drivers (Windows Only) – SAMSUNG_USB_Driver_for_Mobile_Phones.exe
TWRP – twrp-3.0.2-0-trltevzw.tar.md5
SuperSU – BETA-SuperSU-v2.71-20160331103524.zip
Bootloader Unlock – samsung_unlock_n4-fix
Kingroot (Temporary Root App) - NewKingrootV4.85_C139_B255_en_release_2016_03_29_105203.apk
Not included in download. These files/programs you must find and download.
Super-Sume Pro – On Google Play Store ($3.99)
https://play.google.com/store/apps/details?id=darkslide.com.supersumepro&hl=en
eMMC Brickbug Check – On Google Play Store (Free)
https://play.google.com/store/apps/details?id=net.vinagre.android.emmc_check&hl=en
Root Checker – On Google Play Store (Free)
https://play.google.com/store/apps/details?id=com.joeykrim.rootcheck&hl=en
Required Tools/Parts/Devices
Samsung Galaxy Note 4 on Verizon updated to 5.1.1 (BPA1)
PC with Windows
Micro USB Cable
MicroSD Card
MicroSD Card Reader/USB Adapter (To Format MicroSD Card)
Step 0: Install Note 4 USB Drivers
If you haven’t done this before at some point it’s as simple as opening the Samsung Mobile Phone Drivers included with this guide.
Step 1: Backup All The Things!
Backup anything that is important to you. You should regularly be doing this anyway.
If you use Two Factor Authentication such as Google Authenticator or Lastpass’ Authenticator I highly suggest you disable this before proceeding as we will be factory resetting your device potentially locking you out of some accounts or making them significantly more difficult to recover access too.
Step 1.5: Disable Encryption
Disable both device and sd card encryption.
Step 2: Factory Reset
Factory Reset your phone and format the sd card.
Step 3: Preparing The Device
Follow the directions below to navigate your device’s settings’ menus to change the required settings.
Settings > Security > Reactivation Lock | Disabled! This is very important!
Settings > Security > Unknown sources | Enabled
Settings > Developer Options > USB debugging | Enabled
Settings > Developer Options > Verify app via USB | Enabled
Move the file NewKingrootV4.85_C139_B255_en_release_2016_03_29_105203.apk included with this guide to your phone’s download folder. When plugged in with a usb cable to your computer it’s usually located at “SAMSUNG-SM-N910V\Phone\Download”.
Step 4: Preparing Your PC
Run minimal_adb_fastboot_v1.3.1_setup.exe included with this guide.
Pay attention to what directory this installs to. It’s usually C:\Program Files (x86)\Minimal ADB and Fastboot.
Step 4.1: Copying Files
samsung_unlock_n4-fix & BETA-SuperSU-v2.71-20160331103524.zip included with this guide need to be copied (the actual files, don’t create shortcuts) to the install folder for ADB (Usually C:\Program Files (x86)\Minimal ADB and Fastboot.). These files must be in the same folder as adb.exe
Step 5: ADB & The Unlocker
Your phone should have been connected already with a usb cable to your computer. We need to verify your phone is found by adb. Open adb.exe located in the folder from Step 4. Once the window (cmd.exe) opens a command line interface saying
Code:
Microsoft Windows [Version 10.0.10586]
(c) 2015 Microsoft Corporation. All rights reserved.
C:\Program Files (x86)\Minimal ADB and Fastboot>
Type in the following command: adb devices
Which should return the following
Code:
List of devices attached
123a12ab device
The 123a12ab is made up. Yours will be specific to your device. If you see something listed like the above adb is working. Now on to the next command to move the unlocker to the phone.
Step 5.1: Send Unlocker to Phone with adb
Type the following command: adb push samsung_unlock_n4-fix /data/local/tmp/
If you get an error it’s because you a) typo b) file isn’t in the folder with adb.exe c) your phone is locked/screen is off d) usb debugging isn’t turned on in settings > developer options.
Step 6: Kingroot For Temp Root
Keep the adb window accessible you will need to be able to switch to it and enter in the commands below quickly as temp root is unstable. Be ready to copy or type them quickly.
On your phone open the app My Files. Click on Device storage > Download > NewKingrootV4.85_C139_B255_en_release_2016_03_29_105203.apk to install Kingroot. After it installs click close, not open. Close all running apps.
Step 6.5: Work Quick With Precision
Open Root Checker so it’s ready to go. Don’t Check yet. Hit the home button and then open Kingroot. In Kingroot scroll down and click the button to start temp root. If you don’t see root successful after a minute or two or four you may need to restart your phone and repeat the process of opening root checker and then Kingroot.
Once you do see successful root click the multi tasking button on the phone to switch over to root checker. Temp root is buggy and may crash. If it does repeat this process again with getting temp root and opening the apps in the correct order.
If you make it into root checker via the multi tasking button it will ask you to grant it root access, click yes, check for root. If it says you have root go to the adb window and type these comamnds in quickly before temp root causes your phone to crash.
adb shell
su
cd /data/local/tmp/
chmod 777 samsung_unlock_n4-fix
chown root.root samsung_unlock_n4-fix
./samsung_unlock_n4-fix
The device will reboot. After reboot, shut the phone down by removing only the battery and usb cable.
Step 7: One More Time
Put the battery and cable back in and turn the phone back on. Now repeat Step 5 & 6.5 but skip Step 5.1 and Step 6. After you send the last adb command and it reboots again pull the battery, sd card, and usb cable. Keep the sd card out! Until you plug it into your computer and format it. It doesn’t matter when you format it if it’s not reporting the correct size. This will be fixed by putting it back into your phone AFTER you format it on your pc and formatting it on the phone.
Step 8: Temp Root A Third Time
If it isn’t already installed go ahead and install Super-Sume Pro.
Close all apps.
Open Super-Sume Pro, click the home button, and open Kingroot.
In Kingroot apply temp root. Click the multi tasking button and switch over to Super-Sume Pro. When it asks for Root grant it. Click the big blue button and follow the instructions. It may take a minute or two. Shut the phone down after it’s done.
Step 9: Odin
Turn the phone on and enter download mode by pressing and holding volume down + power + home. When it’s comes to the screen and says “Downloading” you’re ready to proceed. Open the file included with this guide Odin3 v3.09.exe. In Odin3 where it says Files [Download] click AP and navigate to the folder with this guide and select/open the file twrp-3.0.2-0-trltevzw.tar.md5 and then click Start. Once it finishes it will enter a black screen to reboot. Press and hold these buttons immediately to enter TWRP , volume up + power + home.
Step 10: TWRP & ADB Sideloading
Swipe to allow changes in TWRP. Click Advanced and then ADB Sideload. Swipe to start adb. On your computer open adb.exe from Step 4. On the command line interface in adb.exe
Type the following command: adb devices
Verify your device is there and says sideload.
Type the following command: adb sideload BETA-SuperSU-v2.71-20160331103524.zip
The phone will install Super SU, after it is finished we will install the new Kernel before rebooting.
You may need to re-enter ADB Sideload on the phone.
Type the following command: adb devices
Verify your device is there and says sideload.
Type the following command: adb sideload Emotion-TW-5.1.1-nightly-r21-RC1-SM-N910P.zip
Reboot the phone.
If boots into 5.1.1 open root checker and verify you have root.
Information Sources: felixtaf, ryanbg, kingroot, twrp, emotion, ibowtoandroid, shimp208, & urgodfather
I also posted this on reddit. https://www.reddit.com/r/galaxynote4/comments/4f8cgc/guide_a_noobs_guide_to_permanent_rootunlocked/
Click to expand...
Click to collapse
Sent from my SM-N910V using XDA-Developers mobile app
KingVekxin said:
That kernel flash is optional from what I've seen. That's just what people have been wanting on their phones
Sent from my SM-N910V using XDA-Developers mobile app
Click to expand...
Click to collapse
It's optional but have to make like 3 more steps with kernel you just flash it and that's it... 3 less steps
EdrickMG said:
It's missing kernel part
Enviado desde mi SM-N910V mediante Tapatalk
Click to expand...
Click to collapse
It's included in Step 10. I think you may have missed it. It's the very last step. It's also included in the Google Drive folder and torrent.
You shouldn't need to do SuperSuMe. You can use Kingroot for the whole shebang. Also, you will need a kernel for 5.1.x roms otherwise it will bootloop at the Verizon logo.
Robots_Never_Die said:
It's included in Step 10. I think you may have missed it. It's the very last step. It's also included in the Google Drive folder and torrent.
Click to expand...
Click to collapse
Yes you are right I thought u missed it and it's very important... Disregard my previous comment
Enviado desde mi SM-N910V mediante Tapatalk
EdrickMG said:
It's missing kernel part
Enviado desde mi SM-N910V mediante Tapatalk
Click to expand...
Click to collapse
Hyperdimensionalist said:
Thank you for posting this so clearly! Would Samsung "smart switch" be a viable tool to use for backing up all my apps/app data, home screen setup, etc. before rooting, and still work to import the data after rooting?
Click to expand...
Click to collapse
I have not used it. What I did was find every export settings/backup option in apps like nova launcher. I wrote down one time passwords for eligible accounts or disabled 2 factor Auth temporarily. I copied my SD card to my computer, along with all the files in the folders Downloads, Media, DCIM, etc. I exported my contacts and copied the file to my pc. I didn't care about any saved games so I can't help you there. Some people have success with Helium for back ups. Using the pc backup option.
Sizzlechest said:
You shouldn't need to do SuperSuMe. You can use Kingroot for the whole shebang. Also, you will need a kernel for 5.1.x roms otherwise it will bootloop at the Verizon logo.
Click to expand...
Click to collapse
The kernel is included. See comment below from the guy who said I didn't include it.
I heard kingroot sends data to China. So I don't want it on my phone longer than needed.
EdrickMG said:
Yes you are right I thought u missed it and it's very important... Disregard my previous comment
Enviado desde mi SM-N910V mediante Tapatalk
Click to expand...
Click to collapse
isnt kingroot deleted once you do a full wipe before installing a custom rom via twrp?
mta1981 said:
isnt kingroot deleted once you do a full wipe before installing a custom rom via twrp?
Click to expand...
Click to collapse
Correct. Though this is a guide for staying on stock rom with root and the option to change roms at a later point easily.
Robots_Never_Die said:
Samsung Galaxy Note 4 – Verizon Wireless – Permanent Root Guide
Disclaimer: I am not 100% sure on what everything here does. These are just a reproduction of the exact steps, files, and programs I used to achieve successful permanent root on my Verizon Note 4 running 5.1.1 (Build Version: BPA1).
I collected all the apps, files, and this guide into one location. You can source these files yourself or you can use the ones I included.
Download Guide & ALL Required Files
Google Drive
Torrent File
Torrent Magnet Link
Torrent is hosted on 10gbit/s seedbox.
Required Files & Programs
Included in download
ADB – minimal_adb_fastboot_v1.3.1_setup.exe
Odin – Odin3 v3.09.exe & Odin3.ini
Samsung Mobile Phone Drivers (Windows Only) – SAMSUNG_USB_Driver_for_Mobile_Phones.exe
TWRP – twrp-3.0.2-0-trltevzw.tar.md5
SuperSU – BETA-SuperSU-v2.71-20160331103524.zip
Bootloader Unlock – samsung_unlock_n4-fix
Kingroot (Temporary Root App) - NewKingrootV4.85_C139_B255_en_release_2016_03_29_105203.apk
Not included in download. These files/programs you must find and download.
Super-Sume Pro – On Google Play Store ($3.99)
https://play.google.com/store/apps/details?id=darkslide.com.supersumepro&hl=en
eMMC Brickbug Check – On Google Play Store (Free)
https://play.google.com/store/apps/details?id=net.vinagre.android.emmc_check&hl=en
Root Checker – On Google Play Store (Free)
https://play.google.com/store/apps/details?id=com.joeykrim.rootcheck&hl=en
Required Tools/Parts/Devices
Samsung Galaxy Note 4 on Verizon updated to 5.1.1 (BPA1)
PC with Windows
Micro USB Cable
MicroSD Card
MicroSD Card Reader/USB Adapter (To Format MicroSD Card)
Step 0: Install Note 4 USB Drivers
If you haven’t done this before at some point it’s as simple as opening the Samsung Mobile Phone Drivers included with this guide.
Step 1: Backup All The Things!
Backup anything that is important to you. You should regularly be doing this anyway.
If you use Two Factor Authentication such as Google Authenticator or Lastpass’ Authenticator I highly suggest you disable this before proceeding as we will be factory resetting your device potentially locking you out of some accounts or making them significantly more difficult to recover access too.
Step 1.5: Disable Encryption
Disable both device and sd card encryption.
Step 2: Factory Reset
Factory Reset your phone and format the sd card.
Step 3: Preparing The Device
Follow the directions below to navigate your device’s settings’ menus to change the required settings.
Settings > Security > Reactivation Lock | Disabled! This is very important!
Settings > Security > Unknown sources | Enabled
Settings > Developer Options > USB debugging | Enabled
Settings > Developer Options > Verify app via USB | Enabled
Move the file NewKingrootV4.85_C139_B255_en_release_2016_03_29_105203.apk included with this guide to your phone’s download folder. When plugged in with a usb cable to your computer it’s usually located at “SAMSUNG-SM-N910V\Phone\Download”.
Step 4: Preparing Your PC
Run minimal_adb_fastboot_v1.3.1_setup.exe included with this guide.
Pay attention to what directory this installs to. It’s usually C:\Program Files (x86)\Minimal ADB and Fastboot.
Step 4.1: Copying Files
samsung_unlock_n4-fix & BETA-SuperSU-v2.71-20160331103524.zip included with this guide need to be copied (the actual files, don’t create shortcuts) to the install folder for ADB (Usually C:\Program Files (x86)\Minimal ADB and Fastboot.). These files must be in the same folder as adb.exe
Step 5: ADB & The Unlocker
Your phone should have been connected already with a usb cable to your computer. We need to verify your phone is found by adb. Open adb.exe located in the folder from Step 4. Once the window (cmd.exe) opens a command line interface saying
Code:
Microsoft Windows [Version 10.0.10586]
(c) 2015 Microsoft Corporation. All rights reserved.
C:\Program Files (x86)\Minimal ADB and Fastboot>
Type in the following command: adb devices
Which should return the following
Code:
List of devices attached
123a12ab device
The 123a12ab is made up. Yours will be specific to your device. If you see something listed like the above adb is working. Now on to the next command to move the unlocker to the phone.
Step 5.1: Send Unlocker to Phone with adb
Type the following command: adb push samsung_unlock_n4-fix /data/local/tmp/
If you get an error it’s because you a) typo b) file isn’t in the folder with adb.exe c) your phone is locked/screen is off d) usb debugging isn’t turned on in settings > developer options.
Step 6: Kingroot For Temp Root
Keep the adb window accessible you will need to be able to switch to it and enter in the commands below quickly as temp root is unstable. Be ready to copy or type them quickly.
On your phone open the app My Files. Click on Device storage > Download > NewKingrootV4.85_C139_B255_en_release_2016_03_29_105203.apk to install Kingroot. After it installs click close, not open. Close all running apps.
Step 6.5: Work Quick With Precision
Open Root Checker so it’s ready to go. Don’t Check yet. Hit the home button and then open Kingroot. In Kingroot scroll down and click the button to start temp root. If you don’t see root successful after a minute or two or four you may need to restart your phone and repeat the process of opening root checker and then Kingroot.
Once you do see successful root click the multi tasking button on the phone to switch over to root checker. Temp root is buggy and may crash. If it does repeat this process again with getting temp root and opening the apps in the correct order.
If you make it into root checker via the multi tasking button it will ask you to grant it root access, click yes, check for root. If it says you have root go to the adb window and type these comamnds in quickly before temp root causes your phone to crash.
adb shell
su
cd /data/local/tmp/
chmod 777 samsung_unlock_n4-fix
chown root.root samsung_unlock_n4-fix
./samsung_unlock_n4-fix
The device will reboot. After reboot, shut the phone down by removing only the battery and usb cable.
Step 7: One More Time
Put the battery and cable back in and turn the phone back on. Now repeat Step 5 & 6.5 but skip Step 5.1 and Step 6. After you send the last adb command and it reboots again pull the battery, sd card, and usb cable. Keep the sd card out! Until you plug it into your computer and format it. It doesn’t matter when you format it if it’s not reporting the correct size. This will be fixed by putting it back into your phone AFTER you format it on your pc and formatting it on the phone.
Step 8: Temp Root A Third Time
If it isn’t already installed go ahead and install Super-Sume Pro.
Close all apps.
Open Super-Sume Pro, click the home button, and open Kingroot.
In Kingroot apply temp root. Click the multi tasking button and switch over to Super-Sume Pro. When it asks for Root grant it. Click the big blue button and follow the instructions. It may take a minute or two. Shut the phone down after it’s done.
Step 9: Odin
Turn the phone on and enter download mode by pressing and holding volume down + power + home. When it’s comes to the screen and says “Downloading” you’re ready to proceed. Open the file included with this guide Odin3 v3.09.exe. In Odin3 where it says Files [Download] click AP and navigate to the folder with this guide and select/open the file twrp-3.0.2-0-trltevzw.tar.md5 and then click Start. Once it finishes it will enter a black screen to reboot. Press and hold these buttons immediately to enter TWRP , volume up + power + home.
Step 10: TWRP & ADB Sideloading
Swipe to allow changes in TWRP. Click Advanced and then ADB Sideload. Swipe to start adb. On your computer open adb.exe from Step 4. On the command line interface in adb.exe
Type the following command: adb devices
Verify your device is there and says sideload.
Type the following command: adb sideload BETA-SuperSU-v2.71-20160331103524.zip
The phone will install Super SU, after it is finished we will install the new Kernel before rebooting.
You may need to re-enter ADB Sideload on the phone.
Type the following command: adb devices
Verify your device is there and says sideload.
Type the following command: adb sideload Emotion-TW-5.1.1-nightly-r21-RC1-SM-N910P.zip
Reboot the phone.
If boots into 5.1.1 open root checker and verify you have root.
Information Sources: felixtaf, ryanbg, kingroot, twrp, emotion, ibowtoandroid, shimp208, & urgodfather
I also posted this on reddit. https://www.reddit.com/r/galaxynote4/comments/4f8cgc/guide_a_noobs_guide_to_permanent_rootunlocked/
Click to expand...
Click to collapse
Just wanted to say thank you for compiling everything you rock
Thanks to the OP for the effort!
This should be stickied!
Sent from my SM-N910V using Tapatalk
Hey thanks to all devs for all that is being done to make our n4 more lovable. I have everything set up per op. ADB sees my phone and I am able to get root. I enter all the lines of the code and get positive response on all till I get to chmod 777 samsung_unlock_n4-fix. It is in my minimal adb and fastboot folder. It is also unzipped. It all works up to there. Also have drivers installed. Thanks
Sent from my SM-N910V using Tapatalk
having an issue after the command lines, saying this is for some samsung devices only?.....anyone know the fix for this ?
MrMeek said:
having an issue after the command lines, saying this is for some samsung devices only?.....anyone know the fix for this ?
Click to expand...
Click to collapse
What android version are you on? If you are on 4.4.4, update to lollipop and try! Also verify that your emmc starts with 15!
Robots_Never_Die said:
Samsung Galaxy Note 4 – Verizon Wireless – Permanent Root Guide
Disclaimer: I am not 100% sure on what everything here does. These are just a reproduction of the exact steps, files, and programs I used to achieve successful permanent root on my Verizon Note 4 running 5.1.1 (Build Version: BPA1).
I collected all the apps, files, and this guide into one location. You can source these files yourself or you can use the ones I included.
Download Guide & ALL Required Files
Google Drive
Torrent File
Torrent Magnet Link
Torrent is hosted on 10gbit/s seedbox.
Required Files & Programs
Included in download
ADB – minimal_adb_fastboot_v1.3.1_setup.exe
Odin – Odin3 v3.09.exe & Odin3.ini
Samsung Mobile Phone Drivers (Windows Only) – SAMSUNG_USB_Driver_for_Mobile_Phones.exe
TWRP – twrp-3.0.2-0-trltevzw.tar.md5
SuperSU – BETA-SuperSU-v2.71-20160331103524.zip
Bootloader Unlock – samsung_unlock_n4-fix
Kingroot (Temporary Root App) - NewKingrootV4.85_C139_B255_en_release_2016_03_29_105203.apk
Not included in download. These files/programs you must find and download.
Super-Sume Pro – On Google Play Store ($3.99)
https://play.google.com/store/apps/details?id=darkslide.com.supersumepro&hl=en
eMMC Brickbug Check – On Google Play Store (Free)
https://play.google.com/store/apps/details?id=net.vinagre.android.emmc_check&hl=en
Root Checker – On Google Play Store (Free)
https://play.google.com/store/apps/details?id=com.joeykrim.rootcheck&hl=en
Required Tools/Parts/Devices
Samsung Galaxy Note 4 on Verizon updated to 5.1.1 (BPA1)
PC with Windows
Micro USB Cable
MicroSD Card
MicroSD Card Reader/USB Adapter (To Format MicroSD Card)
Step 0: Install Note 4 USB Drivers
If you haven’t done this before at some point it’s as simple as opening the Samsung Mobile Phone Drivers included with this guide.
Step 1: Backup All The Things!
Backup anything that is important to you. You should regularly be doing this anyway.
If you use Two Factor Authentication such as Google Authenticator or Lastpass’ Authenticator I highly suggest you disable this before proceeding as we will be factory resetting your device potentially locking you out of some accounts or making them significantly more difficult to recover access too.
Step 1.5: Disable Encryption
Disable both device and sd card encryption.
Step 2: Factory Reset
Factory Reset your phone and format the sd card.
Step 3: Preparing The Device
Follow the directions below to navigate your device’s settings’ menus to change the required settings.
Settings > Security > Reactivation Lock | Disabled! This is very important!
Settings > Security > Unknown sources | Enabled
Settings > Developer Options > USB debugging | Enabled
Settings > Developer Options > Verify app via USB | Enabled
Move the file NewKingrootV4.85_C139_B255_en_release_2016_03_29_105203.apk included with this guide to your phone’s download folder. When plugged in with a usb cable to your computer it’s usually located at “SAMSUNG-SM-N910V\Phone\Download”.
Step 4: Preparing Your PC
Run minimal_adb_fastboot_v1.3.1_setup.exe included with this guide.
Pay attention to what directory this installs to. It’s usually C:\Program Files (x86)\Minimal ADB and Fastboot.
Step 4.1: Copying Files
samsung_unlock_n4-fix & BETA-SuperSU-v2.71-20160331103524.zip included with this guide need to be copied (the actual files, don’t create shortcuts) to the install folder for ADB (Usually C:\Program Files (x86)\Minimal ADB and Fastboot.). These files must be in the same folder as adb.exe
Step 5: ADB & The Unlocker
Your phone should have been connected already with a usb cable to your computer. We need to verify your phone is found by adb. Open adb.exe located in the folder from Step 4. Once the window (cmd.exe) opens a command line interface saying
Code:
Microsoft Windows [Version 10.0.10586]
(c) 2015 Microsoft Corporation. All rights reserved.
C:\Program Files (x86)\Minimal ADB and Fastboot>
Type in the following command: adb devices
Which should return the following
Code:
List of devices attached
123a12ab device
The 123a12ab is made up. Yours will be specific to your device. If you see something listed like the above adb is working. Now on to the next command to move the unlocker to the phone.
Step 5.1: Send Unlocker to Phone with adb
Type the following command: adb push samsung_unlock_n4-fix /data/local/tmp/
If you get an error it’s because you a) typo b) file isn’t in the folder with adb.exe c) your phone is locked/screen is off d) usb debugging isn’t turned on in settings > developer options.
Step 6: Kingroot For Temp Root
Keep the adb window accessible you will need to be able to switch to it and enter in the commands below quickly as temp root is unstable. Be ready to copy or type them quickly.
On your phone open the app My Files. Click on Device storage > Download > NewKingrootV4.85_C139_B255_en_release_2016_03_29_105203.apk to install Kingroot. After it installs click close, not open. Close all running apps.
Step 6.5: Work Quick With Precision
Open Root Checker so it’s ready to go. Don’t Check yet. Hit the home button and then open Kingroot. In Kingroot scroll down and click the button to start temp root. If you don’t see root successful after a minute or two or four you may need to restart your phone and repeat the process of opening root checker and then Kingroot.
Once you do see successful root click the multi tasking button on the phone to switch over to root checker. Temp root is buggy and may crash. If it does repeat this process again with getting temp root and opening the apps in the correct order.
If you make it into root checker via the multi tasking button it will ask you to grant it root access, click yes, check for root. If it says you have root go to the adb window and type these comamnds in quickly before temp root causes your phone to crash.
adb shell
su
cd /data/local/tmp/
chmod 777 samsung_unlock_n4-fix
chown root.root samsung_unlock_n4-fix
./samsung_unlock_n4-fix
The device will reboot. After reboot, shut the phone down by removing only the battery and usb cable.
Step 7: One More Time
Put the battery and cable back in and turn the phone back on. Now repeat Step 5 & 6.5 but skip Step 5.1 and Step 6. After you send the last adb command and it reboots again pull the battery, sd card, and usb cable. Keep the sd card out! Until you plug it into your computer and format it. It doesn’t matter when you format it if it’s not reporting the correct size. This will be fixed by putting it back into your phone AFTER you format it on your pc and formatting it on the phone.
Step 8: Temp Root A Third Time
If it isn’t already installed go ahead and install Super-Sume Pro.
Close all apps.
Open Super-Sume Pro, click the home button, and open Kingroot.
In Kingroot apply temp root. Click the multi tasking button and switch over to Super-Sume Pro. When it asks for Root grant it. Click the big blue button and follow the instructions. It may take a minute or two. Shut the phone down after it’s done.
Step 9: Odin
Turn the phone on and enter download mode by pressing and holding volume down + power + home. When it’s comes to the screen and says “Downloading” you’re ready to proceed. Open the file included with this guide Odin3 v3.09.exe. In Odin3 where it says Files [Download] click AP and navigate to the folder with this guide and select/open the file twrp-3.0.2-0-trltevzw.tar.md5 and then click Start. Once it finishes it will enter a black screen to reboot. Press and hold these buttons immediately to enter TWRP , volume up + power + home.
Step 10: TWRP & ADB Sideloading
Swipe to allow changes in TWRP. Click Advanced and then ADB Sideload. Swipe to start adb. On your computer open adb.exe from Step 4. On the command line interface in adb.exe
Type the following command: adb devices
Verify your device is there and says sideload.
Type the following command: adb sideload BETA-SuperSU-v2.71-20160331103524.zip
The phone will install Super SU, after it is finished we will install the new Kernel before rebooting.
You may need to re-enter ADB Sideload on the phone.
Type the following command: adb devices
Verify your device is there and says sideload.
Type the following command: adb sideload Emotion-TW-5.1.1-nightly-r21-RC1-SM-N910P.zip
Reboot the phone.
If boots into 5.1.1 open root checker and verify you have root.
Information Sources: felixtaf, ryanbg, kingroot, twrp, emotion, ibowtoandroid, shimp208, & urgodfather
I also posted this on reddit. https://www.reddit.com/r/galaxynote4/comments/4f8cgc/guide_a_noobs_guide_to_permanent_rootunlocked/
Click to expand...
Click to collapse
Good one mate...
You can also flash MultiSystem-Kernel_LP-5.1.1 by @hsbadr instead of emotion kernel!
Its SE Permissive and wont show, "Seandroid is not selinux enforcing" error during boot and very snappy!
https://www.androidfilehost.com/?fid=24415232478676428
Yes this is a very good write-up of instructions. But I too, think the flashing the kernel is worth mentioning, considering I went through all this and ended up boot looping because I did not have the kernel, ended up doing it all over again, but a lot smarter the second time around.
?If someone helps you, plz thank them?
Sent from my Tab S SM-T700
Robots_Never_Die said:
Samsung Galaxy Note 4 – Verizon Wireless – Permanent Root Guide
Step 8: Temp Root A Third Time
If it isn’t already installed go ahead and install Super-Sume Pro.
Close all apps.
Open Super-Sume Pro, click the home button, and open Kingroot.
In Kingroot apply temp root. Click the multi tasking button and switch over to Super-Sume Pro. When it asks for Root grant it. Click the big blue button and follow the instructions. It may take a minute or two. Shut the phone down after it’s done.
Click to expand...
Click to collapse
My Super-Sume Pro is stuck on the beginning of Step 2. Is this necessary to run or can I skip out on it.
Hello,
In the process of flashing my note 4, several dozen times, it seems I overheated it while flashing and burned up my memory and got the dreaded memory error,
which requires you to either
1, buy a machine to remove the memory chip, solder in a new one, and reprogram it with a special flashing tool, ( probably several thousand dollars, with acccess to the correct flash file
or
2, buy a new motherboard
So,
I ordered a new motherboard from China, 29.00 on Alibaba.
When i received it it was already setup booted to a running 5.0.1 oem rom, with no user or other programs setup. I could not root it..
I tried several guides and found this one by @hsbadr
Code:
https://forum.xda-developers.com/note-4-verizon/development/howto-bootloader-unlock-upgrade-to-t3398144
In the forum found this link to files needed
Code:
https://forum.xda-developers.com/devdb/project/?id=15720#downloads
with this file
Code:
https://forum.xda-developers.com/devdb/project/dl/?id=18880
and installed it via odin.
Both this guide
Code:
https://forum.xda-developers.com/showthread.php?t=3360883
and @hsbadr guide shows to install kingroot, others show kingoroot, and others show to install a perm root after temp root.
In way with either my oem 5.0.1 or 5.1.1 could I root with kingroot, with any flavor of file! kingoroot would not install on either rom.
HOWEVER i was successful at using the PC kingoroot version with the above file mentioned.
CAUTION #1. make sure you have an antivirus installed to block some spyware. I used AVG with windows 7
CAUTION #2. dont click on any popups except to close them except for the main root screen
Root took about 30 sec with no reboots,
Caution : its a temp root that wont last on reboot
so continue onto
ADB & The Unlocker
install ADB to c:/ADB folder
copy the unlocker file to this folder or add c:/ADB to your path
Your phone should have been connected already with a usb cable to your computer. We need to verify your phone is found by adb.
open search by your home button in windows
search command or cmd
right click, open as administrator
change directory to your adb folder and
Type in the following command:
Code:
adb devices
Which should return the following
Code:
List of devices attached
123a12ab device
The 123a12ab is made up. Yours will be specific to your device.
If you see something listed like the above adb is working. Now on to the next command to move the unlocker to the phone.
Step 5.1: Send Unlocker to Phone with adb
Type the following command: adb push samsung_unlock_n4-fix /data/local/tmp/
If you get an error it’s because you a) typo b) file isn’t in the folder with adb.exe c) your phone is locked/screen is off d) usb debugging isn’t turned on in settings > developer options.
++++ modified, you should have temp root with kingoroot pc version
Step 6: SKIP -----Kingroot For Temp Root
Keep the adb window accessible you will need to be able to switch to it and enter in the commands below quickly as temp root is unstable. Be ready to copy or type them quickly.
Step 6.5: Work Quick With Precision
++++ modified
Open Root Checker so it’s ready to go. Check .
Once you do see successful root click the multi tasking button on the phone to switch over to root checker. Temp root is buggy and may crash. If it does repeat this process again with getting temp root and opening the apps in the correct order.
If you make it into root checker via the multi tasking button it will ask you to grant it root access, click yes, check for root. If it says you have root go to the command adb window and type these commands in quickly to verify root
you are now going to enter the linux shell on your device
Code:
adb shell
su
if you see the # prompt you are ready. copy and paste the following
Code:
cd /data/local/tmp/ && chmod 777 samsung_unlock_n4-fix && chown root.root samsung_unlock_n4-fix && ./samsung_unlock_n4-fix
The device will reboot and flash the developer code, shut the phone down by removing only the battery and usb cable.
+++++ edited
Step 7: One More Time to unlock the bootloader !!
Put the battery and cable back in and turn the phone back on.
Now repeat the kingoroot PC to gain temp root
Repeat step 6.5
After you send the last adb command and it will reboot and enter a bootloop . THIS IS NORMAL.
again pull the usb cable.
Pull the Battery
PULL THE SD Card and Keep the sd card out!
The sd card is unusable and needs a reformat, or you can keep it because it has a backup of your locked bootloader
Until you plug it into your computer and format it. It doesn’t matter when you format it if it’s not reporting the correct size. This will be fixed by putting it back into your phone AFTER you format it on your pc and formatting it on the phone.
Your bootloader is NOW UNLOCKED
reboot your phone,
and install TWRP via ODIN !!
++++ ignore this it wont work i tried . you need the androind kingroot or kingoroot to work. if u use kingoroot PC to root again, SUPERSUme will not find it .. waste of time
Step 8: Temp Root A Third Time
+++ Modified
Step 8: copy over a rom that you have already downloaded that you want to try
I reccomend this one
Code:
https://forum.xda-developers.com/note-4/snapdragon-dev/oreo-8-1-0-unofficial-lineage-15-1-rom-t3760969
download the rom, and the gapps to your computer and transfer them to a clean SD card.
power off the phone and install the SD card with your rom files
++++ Now were going to do it !!!
Step 9: Odin the newest twrp
Turn the phone on and enter download mode by pressing and holding volume down + power + home. When it’s comes to the screen and says “Downloading” you’re ready to proceed.
Browse to your ODIN folder on your computer , right click, open as administrator the odin.exe file
In Odin3 where it says Files [Download] click AP and navigate to the folder you have the twrp file . select/open the file twrp-3.x.x.x-trltevzw.tar.md5
Turn off the automatic rebooting in the custom tab, DO NOT select the PIT tab
Press start
Once it finishes it will say Success or FAILED
IF it says FAILED start the process over, you didn't unlock the bootloader
Power off the phone with the pull battery method
Press and hold these buttons immediately to enter TWRP ,
volume up + power + home.
++++ this step 10 is outdated. see mine below
++++ There are other methods to root unless you want to root your stock 5.1.1 kernel and stay there
Step 10: TWRP & ADB Sideloading
Swipe to allow changes in TWRP. Click Advanced and then ADB Sideload. Swipe to start adb. On your computer open adb.exe from Step 4. On the command line interface in adb.exe
Type the following command: adb devices
Verify your device is there and says sideload.
Type the following command: adb sideload BETA-SuperSU-v2.71-20160331103524.zip
The phone will install Super SU, after it is finished we will install the new Kernel before rebooting.
You may need to re-enter ADB Sideload on the phone.
Type the following command: ab devices
Verify your device is there and sys sideload.
Type the following command: adb sideload Emotion-TW-5.1.1-nightly-r21-RC1-SM-N910P.zip
Reboot the phone.
If boots into 5.1.1 open root checker and verify you have root.
++++++
Step 11: TWRP rom setup the first time by @tripLr
power on phone to recovery by holding down <up> <home> then <power>
boot into TWRP, allow changes.
select backup , change to SD card
BACKUP your rootable device with the bootloader and modem and everything. Name the backup rooted-backup-everything-5.1.1
go to install but DONT install yet
Select your sd card.
You should see the files for the ROM you transferred from your computer
If You dont, you can boot back up, transfer the files appropriately . Then come back here.
Now go to Wipe, Custom, and select everything except external SD card.
THIS IS TO guarantee, no Kingoroot or kingroot stuff is in the phone !!!
WIPE IT TWICE !!!
Now install you ROM, and after your inital setup, come back to TWRP and do a full backup
every time you try a new rom, and get it set up, do a backup. that way you can switch and test to your hearts desire till you run out of SD memory.
The cool thing is you can backup to an external memory device ! more room !
Enjoy
Information Sources: felixtaf, ryanbg, kingroot, twrp, emotion, ibowtoandroid, shimp208, & urgodfather
I also posted this on reddit. https://www.reddit.com/r/galaxynote4/comments/4f8cgc/guide_a_noobs_guide_to_permanent_rootunlocked/[/QUOTE]
tripLr said:
Admin Note: This is a special Q&A-formatted thread. Please follow this link to view it in your browser: http://xda.tv/post77375464
Click to expand...
Click to collapse
Admin can you delete this I accidentally posted the wrong type