after installing custom rom., my device don't wake up properly. after pressing power button, it doesn't wake up automatically. its like I have to press it a lot of times. or if I just keep pressing it to reboot, its just stock on custom ROM logo. please help
Related
I am currently using a combination of No Lock, Screen Off, and Quick Boot (because my power button stopped working - if you have suggestions on how to unroot without a power button please let me know). Anyway, I noticed that when selecting Shutdown on Quick Boot, my phone shuts down and then restarts right away. I am running CM7 7.0.3. If you could share some insight, I would appreciate it.
Hi guys,
My Mrs. Orange SanFran has all of a sudden decided it doesnt want it's screen touched anymore. All the hard buttons are working and can not see any other issues. Seems there are several people who have experienced it but it seems to resolved itselfon a restart but her's isn't, no matter how long I take the battery out or pressing the reset under the battery cover I can't use the screen making it useless.
Any ideas? I stuck a custom Rom of 2.2 on it when first got it but can't remeber which one, maybe modaco Kitchen R12 Rom.
Cheers
Reboot to recovery, Wipe both Dalvik and normal cache, and restart. If that doesn't help, do a factory reset / wipe data, and restart. If that doesn't help re-install the rom.
Thanks for the tip, but I tried to enter recovery by holding down volume key when powering up but a screen breifly loaded that had the small text "android" written upsidedown but then just goes on loop of the screen and the standard screen, can't do anything.
Holding up volume whilst powering on doesn;t do anything and because I can't use the touch screen I can't access any recovery apps through the phone OS.
It's weird cause I've used to recovery mode on phone boot before as first ROM didn't work, so I know the recovery module worked before, no idea why not now. :-s
Could be either bad flash/root or faulty hw. Google "de-bricking a ZTE Blade".
Thanks again. Came across a very thorough article on modaco but unfortunately the phone won't do anything than a normal startup when holding the up volume or up and menu, so can't try any of the suggestions.
The volume buttons do work though as moved the volume in the OS
Just to be sure: you did first press & hold the volume down button, and then press & hold the power button? You have to hold them both down until the recovery menu pops up. I can take even 10 seconds or more.
If everything fails, try TPT flash. It should solve if there is no hardware issue.
Since i dlash a kitktat bootloader for d802 and re flash ressurection rom last build.
It came up with SOD screen... i tried to hold power button for 10sec and acccess to recovery mode by pressing hold down volume and power button.
but it aint work... what i suppose to do??? It also blank screeen with no option to acccess recovery.
Hi guys,
I'm facing a issue that is kinda new for me.
When I was restarting my xt1068 to Bootloader menu and then selecting recovery option, it gets stuck at bootloader warning logo. As this already happened to me so many times, I've tried to restart the phone using the lock and volume down button. BUT this time this doesn't work. Now I can't restart it and my phone is now stuck on a "forever" warning logo. What should I do to solve this?
Which firmware are you on? If you are on lollipop,the buttons have changed. If you see that "dead android" lying on his back :
on Lollipop:
Press Power and while pressing it tap Volume Up
on KitKat:
Press Volume UP for 5 sec while pressing Volume UP press Power button.
(don't release Volume UP before pressing Power)
Wolfcity said:
Which firmware are you on? If you are on lollipop,the buttons have changed. If you see that "dead android" lying on his back :
on Lollipop:
Press Power and while pressing it tap Volume Up
on KitKat:
Press Volume UP for 5 sec while pressing Volume UP press Power button.
(don't release Volume UP before pressing Power)
Click to expand...
Click to collapse
Tried it, but still no good results
Lemme be more direct of what I've done
Rebooted into Bootloader > Tapped on Recovery > Shown Warning Bootlogo > (GETS STUCK) > Can't restart using Power and Volume up nor Down > (STILL STUCK)
Try to hold the power button for about 5 minutes. Can you reach bootloader? Maybe you can flash twrp again.
Wolfcity said:
Try to hold the power button for about 5 minutes. Can you reach bootloader? Maybe you can flash twrp again.
Click to expand...
Click to collapse
I got it. But not holding for 5 minutes.
It happens that I have no idea how it went through this bug.
But as my last stand of it, i've let my phone stucked to the bootloader until the battery dies.
Then I've pressed the power button with the phone charging and everything seems to work fine now.
The problem is fixed, but this bug god knows why
I would like to appreciate your help @Wolfcity, long live!
Cheers.
PS: Requesting a mod to close this thread, the problem was solved.
You're welcome. Great to hear that your problem is solved.?
Hello.
I tried to install this custom rom for my SM-A510F:
https://forum.xda-developers.com/samsung-a-series/development/rom-advanced-seven-v1-3-t3516980
Now it's frozen since 20 minutes while "Installing dialerframework" at 42.50%.
Nothing happens.
How do I solve this problem?
Turn off power and Reinstall it
uivipig said:
Hello.
I tried to install this custom rom for my SM-A510F:
https://forum.xda-developers.com/samsung-a-series/development/rom-advanced-seven-v1-3-t3516980
Now it's frozen since 20 minutes while "Installing dialerframework" at 42.50%.
Nothing happens.
How do I solve this problem?
Click to expand...
Click to collapse
You will have to reboot to recovery and re-flash from the beginning.
To go back to recovery again, you can try this :-
Press vol up & vol down key + power + home button.
when the screen turns black release vol down & keeping pressing vol up+home+power until you see the first logo.
release all the keys & you should boot into recovery :good:
flash the rom again.