Related
I've flashed a stock firmware everyone else flashed. But after flashing, my phone's fingerprint and networks are not working.
In the settings, the baseband is also not "ATHENE_INDIA_DSDS_CUST". It's "DFLT_FSG".
Please help me.
You flashed the wrong one obviously. Which file did u flash?
Sent from my Moto G4 Plus using Tapatalk
Silesh.Nair said:
You flashed the wrong one obviously. Which file did u flash?
Sent from my Moto G4 Plus using Tapatalk
Click to expand...
Click to collapse
This one
http://forum.xda-developers.com/moto-g4-plus/how-to/moto-g4-plus-xt1643-updated-signed-t3460695
That's the correct one. Only your baseband is different? Rest all works. In that case just flash fsg.bin and NON-HLOS.bin and wipe modem1 and modem2.
Sent from my Moto G4 Plus using Tapatalk
Silesh.Nair said:
That's the correct one. Only your baseband is different? Rest all works. In that case just flash fsg.bin and NON-HLOS.bin and wipe modem1 and modem2.
Sent from my Moto G4 Plus using Tapatalk
Click to expand...
Click to collapse
Tried flashing it. No success. Also the fiingerprint reader is also missing.
Even i have the same issue...FP sensor is not recognised during initial setup and also the setting is missing in the settings menu.
Flash the Indian modems doesn't work. Dailing *#06# shows only one IMEI number.Sim card is detected but always stays on No service mode....attempting to search for networks from setting results in an error.Service centre didn't accept my phone saying theres only one IMEI number and the bootloader is unlocked.Any help would be appreciated as we have no where to go.
GeeteshKhatavkar said:
Even i have the same issue...FP sensor is not recognised during initial setup and also the setting is missing in the settings menu.
Flash the Indian modems doesn't work. Dailing *#06# shows only one IMEI number.Sim card is detected but always stays on No service mode....attempting to search for networks from setting results in an error.Service centre didn't accept my phone saying theres only one IMEI number and the bootloader is unlocked.Any help would be appreciated as we have no where to go.
Click to expand...
Click to collapse
Glad that someone acknowledge the issue. There is one more guy here at xda roaming with the same problem. I've tried almost every method possible. Still no luck. But for luck, my service center guy offered a free board replacement for the problem. If xda guys didn help, I would send it for replacement. Mine is also bootloader unlocked and software status modified, but he is okey to offer a replacement.
sabithmk said:
Glad that someone acknowledge the issue. There is one more guy here at xda roaming with the same problem. I've tried almost every method possible. Still no luck. But for luck, my service center guy offered a free board replacement for the problem. If xda guys didn help, I would send it for replacement. Mine is also bootloader unlocked and software status modified, but he is okey to offer a replacement.
Click to expand...
Click to collapse
Which city ?I think you should go for the replacement and then update it via OTA when you get a notification.
Any Solutions Yet ?
Has anyone found any solutions yet !?
It is surely a Software issue
Service Center people are asking Rs.6500/- to replace the motherboard
Can't even relock the bootloader as i flashed the Nougat OTA and thus i can't downgrade the bootloader and lock it either !!
Please Help !
sabithmk said:
I've flashed a stock firmware everyone else flashed. But after flashing, my phone's fingerprint and networks are not working.
In the settings, the baseband is also not "ATHENE_INDIA_DSDS_CUST". It's "DFLT_FSG".
Please help me.
Click to expand...
Click to collapse
You found any solution?? I am facing the same problem...
bonnyshroff said:
You found any solution?? I am facing the same problem...
Click to expand...
Click to collapse
I sent it for service and got a free replacement.
bonnyshroff said:
You found any solution?? I am facing the same problem...
Click to expand...
Click to collapse
Yes I found it..
I created a thread. Check this.
https://forum.xda-developers.com/moto-g4-plus/how-to/solve-moto-g4-plus-one-imei-fp-sensor-t3800410
---------- Post added at 11:38 AM ---------- Previous post was at 11:36 AM ----------
sabithmk said:
I've flashed a stock firmware everyone else flashed. But after flashing, my phone's fingerprint and networks are not working.
In the settings, the baseband is also not "ATHENE_INDIA_DSDS_CUST". It's "DFLT_FSG".
Please help me.
Click to expand...
Click to collapse
Check this link friend. I did it. Was having same problem as you.
Check the thread I created.
https://forum.xda-developers.com/moto-g4-plus/how-to/solve-moto-g4-plus-one-imei-fp-sensor-t3800410
Try this https://forum.xda-developers.com/moto-g4-plus/how-to/stock-rom-npjs25-93-14-4-march-1-t3608138
I have moto g4 xt1622 and everything works fine
I did it by next topic
https://forum.xda-developers.com/moto-g4-plus/how-to/moto-g4-plus-hardbrick-solved-guide-t3657761
But do not use ota updates in future. You can flash new same system if someone collect again after came securty patch or os update
You need these files and run commands. See up link guide
http://www.mediafire.com/file/owo07yg79m3mxw6/Minimal ADB and Fastboot.rar
gioyocho said:
Try this https://forum.xda-developers.com/moto-g4-plus/how-to/stock-rom-npjs25-93-14-4-march-1-t3608138
I have moto g4 xt1622 and everything works fine
I did it by next topic
https://forum.xda-developers.com/moto-g4-plus/how-to/moto-g4-plus-hardbrick-solved-guide-t3657761
But do not use ota updates in future. You can flash new same system if someone collect again after came securty patch or os update
You need these files and run commands. See up link guide
http://www.mediafire.com/file/owo07yg79m3mxw6/Minimal ADB and Fastboot.rar
Click to expand...
Click to collapse
A few things:
1) As long as you are fully updated to the latest stock ROM, OTA updates should not be a problem. OTA updates are usually a problem if you have downgraded your device (like in your case downgrading to Dec 2016 firmware) or not having the full stock ROM, including the bootloader of the same patch level, (i.e. having mixed firmware) flashed to your device. If you really want to, you can use the latest stock ROM to re-lock your bootloader, and providing it's the correct stock ROM for your region/device, you should receive and be able to flash OTA updates without problem (as a locked bootloader will enforce you having firmware matching the bootloader update level).
2)I'm not sure how a minimal ADB/fastboot image is 900+ MB. Unless that mediafire link is pointing to the Android SDK which includes the ADB and fastboot programs, the minimal ADB/fastboot is about 1 MB https://forum.xda-developers.com/showthread.php?t=2317790
3)Unfortunately, repairing IMEI and loss of fingerprint sensor is not as straightforward as flashing the stock ROM. You may require the hw, fsg and modem images.
echo92 said:
A few things:
1) As long as you are fully updated to the latest stock ROM, OTA updates should not be a problem. OTA updates are usually a problem if you have downgraded your device (like in your case downgrading to Dec 2016 firmware) or not having the full stock ROM, including the bootloader of the same patch level, (i.e. having mixed firmware) flashed to your device. If you really want to, you can use the latest stock ROM to re-lock your bootloader, and providing it's the correct stock ROM for your region/device, you should receive and be able to flash OTA updates without problem (as a locked bootloader will enforce you having firmware matching the bootloader update level).
2)I'm not sure how a minimal ADB/fastboot image is 900+ MB. Unless that mediafire link is pointing to the Android SDK which includes the ADB and fastboot programs, the minimal ADB/fastboot is about 1 MB https://forum.xda-developers.com/showthread.php?t=2317790
3)Unfortunately, repairing IMEI and loss of fingerprint sensor is not as straightforward as flashing the stock ROM. You may require the hw, fsg and modem images.
Click to expand...
Click to collapse
Well
1. if you have unlocked bootloader, you can not re-lock. i think this is the brick's reason. i had installed yes old bootloader file with december 2016 security patch, then came ota update to april 2018 security patch and phone has bricked, as from marshmallow to nougat update while bootloader was unlocked. but i do not know reason exactly, because first time i did stock marshmallow 6.0 rom, then came ota update everything works fine new security patch of 6.0, after that came nougat ota update and phone was bricked
2. yes there is difference between .rar and folder. just extract it
3. if it is hardware issue, rom can not change anything yes
gioyocho said:
Well
1. if you have unlocked bootloader, you can not re-lock. i think this is the brick's reason. i had installed yes old bootloader file with december 2016 security patch, then came ota update to april 2018 security patch and phone has bricked, as from marshmallow to nougat update while bootloader was unlocked. but i do not know reason exactly, because first time i did stock marshmallow 6.0 rom, then came ota update everything works fine new security patch of 6.0, after that came nougat ota update and phone was bricked
2. yes there is difference between .rar and folder. just extract it
3. if it is hardware issue, rom can not change anything yes
Click to expand...
Click to collapse
1)You can re-lock your device with the April 2018 stock firmware https://forum.xda-developers.com/moto-g4-plus/how-to/stock-rom-npjs25-93-14-4-march-1-t3608138. You need a stock firmware image as new or newer than your bootloader - we've seen many examples on this stock ROM thread of users re-locking their bootloaders.
The likely reason that you hard bricked is that you did not actually downgrade your bootloader when you flashed the Marshmallow stock ROM. Hence, you still had the Nougat bootloader on your device, which got corrupted when you used the old MM to Nougat OTA.
To re-lock your device, you must use the newest appropriate firmware for your device. Do not flash old stock firmware (including MM) and do not mix your firmwares (do not flash old bootloader files with new firmware). Of course, re-locking your bootloader will not restore your warranty and the process will erase your device, so up to you.
gioyocho said:
Try this https://forum.xda-developers.com/moto-g4-plus/how-to/stock-rom-npjs25-93-14-4-march-1-t3608138
I have moto g4 xt1622 and everything works fine
I did it by next topic
https://forum.xda-developers.com/moto-g4-plus/how-to/moto-g4-plus-hardbrick-solved-guide-t3657761
But do not use ota updates in future. You can flash new same system if someone collect again after came securty patch or os update
You need these files and run commands. See up link guide
http://www.mediafire.com/file/owo07yg79m3mxw6/Minimal ADB and Fastboot.rar
Click to expand...
Click to collapse
Check my link.
You can even OTA update in future if you installed the latest firmware.
https://forum.xda-developers.com/moto-g4-plus/how-to/solve-moto-g4-plus-one-imei-fp-sensor-t3800410
echo92 said:
1)You can re-lock your device with the April 2018 stock firmware https://forum.xda-developers.com/moto-g4-plus/how-to/stock-rom-npjs25-93-14-4-march-1-t3608138. You need a stock firmware image as new or newer than your bootloader - we've seen many examples on this stock ROM thread of users re-locking their bootloaders.
The likely reason that you hard bricked is that you did not actually downgrade your bootloader when you flashed the Marshmallow stock ROM. Hence, you still had the Nougat bootloader on your device, which got corrupted when you used the old MM to Nougat OTA.
To re-lock your device, you must use the newest appropriate firmware for your device. Do not flash old stock firmware (including MM) and do not mix your firmwares (do not flash old bootloader files with new firmware). Of course, re-locking your bootloader will not restore your warranty and the process will erase your device, so up to you.
Click to expand...
Click to collapse
I do not know how to re-lock bootloader. i have latest stock rom 7.0 with april security patch
gioyocho said:
I do not know how to re-lock bootloader. i have latest stock rom 7.0 with april security patch
Click to expand...
Click to collapse
If you have a look and read of the stock ROM initial post https://forum.xda-developers.com/moto-g4-plus/how-to/stock-rom-npjs25-93-14-4-march-1-t3608138 in that guide you'll see flashing commands that should let you re-lock your bootloader.
Also, if you want to re-lock your bootloader, check that you have OEM unlocking enabled in Settings>Developer Options (the same toggle you turned on when you unlocked the bootloader in the first place).
So the summary is:
1)Turn on OEM unlocking in Settings>Developer Options.
2)Boot your device to bootloader
3)Fully flash the April 2018 stock ROM (all files must be from the April 2018 stock ROM, no exceptions) as per the flashing commands in the guide, including all the OEM lock commands. This should wipe your device, re-lock your bootloader and let you boot with stock files. Attempting to mix files will cause your lock to fail or your device to not boot, as the firmware you flashed is now being checked by your bootloader to verify it's all from the same firmware.
echo92 said:
If you have a look and read of the stock ROM initial post https://forum.xda-developers.com/moto-g4-plus/how-to/stock-rom-npjs25-93-14-4-march-1-t3608138 in that guide you'll see flashing commands that should let you re-lock your bootloader.
Also, if you want to re-lock your bootloader, check that you have OEM unlocking enabled in Settings>Developer Options (the same toggle you turned on when you unlocked the bootloader in the first place).
So the summary is:
1)Turn on OEM unlocking in Settings>Developer Options.
2)Boot your device to bootloader
3)Fully flash the April 2018 stock ROM (all files must be from the April 2018 stock ROM, no exceptions) as per the flashing commands in the guide, including all the OEM lock commands. This should wipe your device, re-lock your bootloader and let you boot with stock files. Attempting to mix files will cause your lock to fail or your device to not boot, as the firmware you flashed is now being checked by your bootloader to verify it's all from the same firmware.
Click to expand...
Click to collapse
well i tried and did not work those run commands
Solved, Check below for solution
Please help me to revive my Moto G4 .
Hi got a pure evil phone (Hard Bricked)
How This Happened :
Everything was going good then i lost my Volte network, I tried to solve by wiping cache and dalvik cache, didn't worked then wiped data, didn't worked, Then i decided to flash it to stock.
I was in the latest version of Nougat 01 June Security patch a custom kernel with root, TWRP and obviously unlocked bootloader. In first i could not find my version of stock rom which is NPJS25 then i decided to flash another stock which is at November 2016 patch version (NPJ25). When flashing I just left the gpt.bin and bootloader.bin thinking that i already have the latest partition table (Maybe it was an horrible mistake). After flashing i got my VOLTE back everything good now.
Then I searched for system update, got one from December (118MB) installed it, Then searching got another from March(May be) it was getting installed then the disaster happened it got switched off, waited for 5 mins tried to Start it, failing hereafter connected it to Pc, got QSHUSB_BULK in device manager. Then updating the driver and flashing the blankflash i got fastboot(the first sign of live). after that i am not moving.
what i tried
Upon starting it i get "Failed to initialize partition table" in Bootloader logs
When i try to flash gpt.bin from NPJ25 it says "Preflash Verification failed".
Now what i got is a nice fastboot mode, locked bootloader, ****ed up gpt.bin.
Any idea of solving it ??
This Thread Solved my problem, try it if you have same type of problem
You may wish to consult the following blankflash guide: https://forum.xda-developers.com/moto-g4-plus/how-to/moto-g4-plus-hardbrick-solved-guide-t3657761 This has links to a blankflash, and GPT/bootloader and a fastboot ROM of the June 2017 NPJS25.93-14-8 stock ROM (that's been around for a little while too). Hopefully that'll rescue your device. Sounds like you need the fastboot June 2017 stock ROM to reflash your GPT, bootloader and core firmware. How did you manage to re-lock your bootloader btw?? (NOTE - the NPJS25.93-14-8 ROM appears to be for retail non-USA devices).
Also, with losing VoLTE, did you confirm with your mobile network operator if it was you or if they were having an outage in your area?
As an aside to anyone else, downgrading from June 2017 with an older stock ROM and then attempting to take an OTA has a very high risk of hard bricking.
echo92 said:
You may wish to consult the following blankflash guide: https://forum.xda-developers.com/moto-g4-plus/how-to/moto-g4-plus-hardbrick-solved-guide-t3657761 This has links to a blankflash, and GPT/bootloader and a fastboot ROM of the June 2017 NPJS25.93-14-8 stock ROM (that's been around for a little while too). Hopefully that'll rescue your device. Sounds like you need the fastboot June 2017 stock ROM to reflash your GPT, bootloader and core firmware. How did you manage to re-lock your bootloader btw?? (NOTE - the NPJS25.93-14-8 ROM appears to be for retail non-USA devices).
Also, with losing VoLTE, did you confirm with your mobile network operator if it was you or if they were having an outage in your area?
As an aside to anyone else, downgrading from June 2017 with an older stock ROM and then attempting to take an OTA has a very high risk of hard bricking.
Click to expand...
Click to collapse
Yes that fantastic thread save my phone. What i was doing is that flashing the gpt partition taken out from november Nougat rom and i was getting error because i already had the latest corrupted partition. ''fastboot oem lock'' reports that The devices is not in unlocked form, but that was not actually it. May be the fastboot had trouble getting out the information of state of lock because of corrupted partition but after flashing the latest gpt.bin and rebooting fixed all the problems everything is good as it was. I didn't had to even flash anything after that and phone was also updated to the version it corrupted in.
So the experience told that while updating through OTA it tries to update the partition at last even it had not to. Maybe it is technically not possible check the state, i dont know.
xCALIFIER said:
Yes that fantastic thread save my phone. What i was doing is that flashing the gpt partition taken out from november Nougat rom and i was getting error because i already had the latest corrupted partition. ''fastboot oem lock'' reports that The devices is not in unlocked form, but that was not actually it. May be the fastboot had trouble getting out the information of state of lock because of corrupted partition but after flashing the latest gpt.bin and rebooting fixed all the problems everything is good as it was. I didn't had to even flash anything after that and phone was also updated to the version it corrupted in.
So the experience told that while updating through OTA it tries to update the partition at last even it had not to. Maybe it is technically not possible check the state, i dont know.
Click to expand...
Click to collapse
Good to hear that the guide and just repairing your bootloader/GPT was enough to get your device running.
As I understand it, OTAs check your system version and whether you have a stock recovery/stock kernel and unmodified system, but not necessarily whether your bootloader or GPT are at the same patch level as your system. Thus, the OTA you downloaded thought your device was on the December 2016 patch level, and attempted to patch up to March 2017, but your bootloader was actually from June 2017, so corrupting your bootloader. Hence why taking OTAs are so dangerous after a downgrade, especially recently with the June 2017 update, where Motorola patched a bootloader vulnerability, and thus may prevent you downgrading to stop you from re-opening the vulnerability.
Incidentally, this OTA behaviour isn't isolated to our Moto G4/Plus, we've seen it on Moto X (https://forum.xda-developers.com/moto-x-2014/general/warning-downgrade-bootloader-partition-t3105147), Moto Z/Play and other Moto devices, and I've noted it on LG devices too. It's just becoming riskier to update via OTA if you've downgraded. The safest way is either to not downgrade or update using the latest fastboot ROM (preferably the same build as the one you had previously)
echo92 said:
Good to hear that the guide and just repairing your bootloader/GPT was enough to get your device running.
As I understand it, OTAs check your system version and whether you have a stock recovery/stock kernel and unmodified system, but not necessarily whether your bootloader or GPT are at the same patch level as your system. Thus, the OTA you downloaded thought your device was on the December 2016 patch level, and attempted to patch up to March 2017, but your bootloader was actually from June 2017, so corrupting your bootloader. Hence why taking OTAs are so dangerous after a downgrade, especially recently with the June 2017 update, where Motorola patched a bootloader vulnerability, and thus may prevent you downgrading to stop you from re-opening the vulnerability.
Incidentally, this OTA behaviour isn't isolated to our Moto G4/Plus, we've seen it on Moto X (https://forum.xda-developers.com/moto-x-2014/general/warning-downgrade-bootloader-partition-t3105147), Moto Z/Play and other Moto devices, and I've noted it on LG devices too. It's just becoming riskier to update via OTA if you've downgraded. The safest way is either to not downgrade or update using the latest fastboot ROM (preferably the same build as the one you had previously)
Click to expand...
Click to collapse
Yes, exactly. Before upgrading through One should keep in mind that if the update was built for him or not in context of modification to his device.
I cannot turn on moto g4 plus. While connecting the charger the led is blinking but cannot see the charging sign on screen. Please help
What ROM were you running and what device do you have?
Did you flash anything or install anything prior to your device being in this state?
echo92 said:
What ROM were you running and what device do you have?
Did you flash anything or install anything prior to your device being in this state?
Click to expand...
Click to collapse
I was using AICP oreo, but after that i unroot my device and backed to stock.i installed the security patch and after that it's dead. Nothing else i did.
My device is XT1643
Krish_Vihaag said:
I was using AICP oreo, but after that i unroot my device and backed to stock.i installed the security patch and after that it's dead. Nothing else i did.
My device is XT1643
Click to expand...
Click to collapse
Sounds like you bricked it cause you take ota on stock rom and you don't have stock recovery I think... You should try to flash the stock rom via fastboot https://forum.xda-developers.com/moto-g4-plus/how-to/stock-rom-npjs25-93-14-4-march-1-t3608138
Your information about what you did isn't exactly enough to provide a detailed troubleshooting. If you have more detailed information which steps you exactly take and which rom versions you restored etc it would be helpful.
Krish_Vihaag said:
I was using AICP oreo, but after that i unroot my device and backed to stock.i installed the security patch and after that it's dead. Nothing else i did.
My device is XT1643
Click to expand...
Click to collapse
Do you remember what version of stock ROM you had when you flashed AICP ?
I don't think you had December's security patch as itis just month old, so you can try blank-flash with September's patch update.
to blank-flash (download September's gpt and bootloader, where it's mentioned on thread)
Follow it.: https://forum.xda-developers.com/moto-g4-plus/how-to/moto-g4-plus-hardbrick-solved-guide-t3657761
EDIT: Before proceeding to blank-flash, can you tell us if you have access to bootloader or recovery ?
If not, then proceed for blank-flash.
After flashing my phone with Moto G4 Plus XT1640-43 ATHENE NPJ25.93-14 Stock Img, I tried to update the April 2018 security patch. After that my phone doesn't start. Then I use blank flash and my phone starts with recovery mode. Now the problem is when I try to flash my phone again, it say security version downgrade and FAILED. Can you guys please help me into this?
Mayur Thakur said:
After flashing my phone with Moto G4 Plus XT1640-43 ATHENE NPJ25.93-14 Stock Img, I tried to update the April 2018 security patch. After that my phone doesn't start. Then I use blank flash and my phone starts with recovery mode. Now the problem is when I try to flash my phone again, it say security version downgrade and FAILED. Can you guys please help me into this?
Click to expand...
Click to collapse
Sounds like you flashed the Dec 2016 security patch firmware, and then took an OTA - the OTA update on a downgraded firmware likely is what hard bricked your device.
Flash this April 2018 stock firmware: https://forum.xda-developers.com/moto-g4-plus/how-to/stock-rom-npjs25-93-14-4-march-1-t3608138
In future, please do not flash older stock firmware, or if you do downgrade, please do not use OTA updates. The safest way to update is to flash the latest stock firmware for your device/region - after that, OTA updates may be safe.
MOTO G4 plus stock rom
MOTO G4 plus will get OREO update officially so I flashed latest firmware via fastboot on my phone so can update it through ota update when it will be able without bricking my phone or else when it comes I should download the zip and flash it with fastboot with step same step of flahsing nougat forward on my phone
Gaminwarrior said:
MOTO G4 plus will get OREO update officially so I flashed latest firmware via fastboot on my phone so can update it through ota update when it will be able without bricking my phone or else when it comes I should download the zip and flash it with fastboot with step same step of flahsing nougat forward on my phone
Click to expand...
Click to collapse
Nobody can tell you about future things, but in my opinion it should be like this.
I've just captured the Official OPP28.85-16 OTA for retail cedric and I'm posting it here. I'm on retbr channel but this will work on any retail device. If you're on another updated channel, I don't know what would happen if you installed this.
Notice that to install this YOU MUST be on NPPS25.137-93-2-5 to install these, since OTA's are not full firmwares like fastboot files, but instead they're patchings tailored to be applied upon a specific firmare - NPPS25.137-93-2-5 in this case.
Another particular detail is that the OTA file (gotten directly from my credric) lists the Blur Version as Blur_Version.25.361.10.cedric.retail.en.US, but curiously, the fastboot version for the same firmware ( which you can download here) lists it as Blur_Version.28.41.15.cedric.retail.en.US
Someone also reported in another thread that they just sideloaded this upon the Second Soak test. I wouldn't doubt it since this is what should happen to regular soak testers, but if you do it, DO IT AT YOUR OWN RISK
I also won't post instructions on how to install this since they're already available here
Download
Gdrive: https://drive.google.com/file/d/149hrGFpuWUgAvJr02McYNwJVaqSvllYO/view?usp=sharing
That's it.
changelog?
Has anyone already tried it?
Since this is a (Delta) OTA Update that expects NPPS25.137-93-2-5 (Blur_Version.25.361.10) it should be correctly named "block_delta-ota-Blur_Version.25.361.10-28.41.15.cedric.retail.en.US" in my view.
Someone also reported in another thread that they just sideloaded this upon the Second Soak test.
Click to expand...
Click to collapse
I'm on the 2nd soak test update OPP28.85-13.
Just tried to flash the update from SD card and ADB sideload.
Update failed due to wrong version.
E3002: Package expects build thumbprint of 8.1.0/OPP28.85-16/0400:user/release-keys or 7.0/NPPS25.137-93-2-5/10:user/release-keys; this device has 8.1.0/OPP28.85-13/789a:user/release-keys.
JoeDoe0 said:
Since this is a (Delta) OTA Update that expects NPPS25.137-93-2-5 (Blur_Version.25.361.10) it should be correctly named "block_delta-ota-Blur_Version.25.361.10-28.41.15.cedric.retail.en.US" in my view.
I'm on the 2nd soak test update OPP28.85-13.
Just tried to flash the update from SD card and ADB sideload.
Update failed due to wrong version.
E3002: Package expects build thumbprint of 8.1.0/OPP28.85-16/0400:user/release-keys or 7.0/NPPS25.137-93-2-5/10:user/release-keys; this device has 8.1.0/OPP28.85-13/789a:user/release-keys.
Click to expand...
Click to collapse
seems like it can be updated. from. soak test then, but I never heard nor did I find anything about OPP25. 85-16 build. maybe there was a third soak test and we don't know about it
Works perfect
Hi,
i used the above Image in Germany and i am now on Oreo 8.1
Everything works perfect. First i had a little bit trouble due to an old Version of ADB Tools, but after Update ADB to current Version the Update to Oreo took something around 30min.
Build 28.85-16
Oreo 8.1
Software Channel reteu
Patch Level 01.08.2018
bori321 said:
Hi,
i used the above Image in Germany and i am now on Oreo 8.1
Everything works perfect. First i had a little bit trouble due to an old Version of ADB Tools, but after Update ADB to current Version the Update to Oreo took something around 30min.
Build 28.85-16
Oreo 8.1
Software Channel reteu
Patch Level 01.08.2018
Click to expand...
Click to collapse
On which version you were before update?
Firmware
Hi,
before update to Oreo i flashed NPPS25.137-93-2-5 Firmware and after that the Image from this thread.
Worked perfect.
Alex
I tried to post a Screenshot but it was not possible because i am a new member...
Update failed due to wrong version.
E3002: Package expects build thumbprint of 8.1.0/OPP28.85-16/0400:user/release-keys or 7.0/NPPS25.137-93-2-5/10:user/release-keys; this device has 8.1.0/OPP28.85-13/789a:user/release-keys.
Click to expand...
Click to collapse
freeZbies said:
seems like it can be updated. from. soak test then, but I never heard nor did I find anything about OPP25. 85-16 build. maybe there was a third soak test and we don't know about it
Click to expand...
Click to collapse
Update fails from OPP28.85-13 since it expects either OPP28.85-16 which is the latest Oreo build (that I want to update to) or the latest Nougat NPPS25.137-93-2-5.
There is no OPP25. 85-16 build! I think you misread the error message.
BTW I updated from OPP28.85-13 to -16 using the full fastboot version and it worked out perfectly.
JoeDoe0 said:
Update fails from OPP28.85-13 since it expects either OPP28.85-16 which is the latest Oreo build (that I want to update to) or the latest Nougat NPPS25.137-93-2-5.
There is no OPP25. 85-16 build! I think you misread the error message.
BTW I updated from OPP28.85-13 to -16 using the full fastboot version and it worked out perfectly.
Click to expand...
Click to collapse
yeah, I actually misread it, now I see it.
Anyways, flashing it from fastboot doesn't prove anything. but seems like Cedric can be upgraded from the soak test to final version using this ota. Idk because I used fastboot myself too, since I had already modified my system partition.
AsusZenFone3Deluxe said:
changelog?
Click to expand...
Click to collapse
seriously?
stop joking, Motorola doesn't release changelogs.
but I'll try:
updated from nougat to oreo?
duhhh
how is speaker quality in this build ?
because there is some issues in previous oreo builds
Speaker
Hi,
i would say that for my ears the speaker sounds better than it was with Nougat.
After a few days of testing everything works really good and i have not found anything not working or any problems.
Alex
bori321 said:
Hi,
before update to Oreo i flashed NPPS25.137-93-2-5 Firmware and after that the Image from this thread.
Worked perfect.
Alex
I tried to post a Screenshot but it was not possible because i am a new member...
Click to expand...
Click to collapse
how do you get back to NPPS25.137-93-2-5
I followed the steps from this Thread: https://forum.xda-developers.com/g5/development/stock-upgrade-to-official-stock-oreo-8-t3823598
- Unlocked bootloader (don't know of this is necessary)
- back to NPPS25.137-93-2-5 via the commands from the thread i linked (without the lines:
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
)
- via ADB sideload with the Oreo download from this thread to Oreo.
Alex
ahmedAZ said:
how is speaker quality in this build ?
because there is some issues in previous oreo builds
Click to expand...
Click to collapse
In my experience the quality is better than on previous oreo builds.
ahmedAZ said:
how do you get back to NPPS25.137-93-2-5
Click to expand...
Click to collapse
if you have an unlocked bootloader download NPPS25.137-93-2-5 Flashable Zip here and flash it with twrp
bori321 said:
I followed the steps from this Thread: https://forum.xda-developers.com/g5/development/stock-upgrade-to-official-stock-oreo-8-t3823598
- Unlocked bootloader (don't know of this is necessary)
Alex
Click to expand...
Click to collapse
to flash official Motorola files there's no need to unlock the bootloader.
you've just unnecessarily voided your warranty
@freeZbies
Hey is that twrp stock rom (137-93-2-5) the only thing we need to flash before going for the ota ? Cause I've been told that we needed to be on a completely unmodified system partition in order to receive the ota. In that case just flashing twrp stock wouldn't be sufficient right?
https://forum.xda-developers.com/g5...o-official-stock-oreo-8-t3823598/post77713117
Chekm8Qc said:
@freeZbies
Hey is that twrp stock rom (137-93-2-5) the only thing we need to flash before going for the ota ? Cause I've been told that we needed to be on a completely unmodified system partition in order to receive the ota. In that case just flashing twrp stock wouldn't be sufficient right?
https://forum.xda-developers.com/g5...o-official-stock-oreo-8-t3823598/post77713117
Click to expand...
Click to collapse
I dont know if the twrp version would be valid. To apply an OTA, your system must matchbit by bit, so the most guaranteed way is to flash that firmware via fastboot, but you could try flashing the twrp version, and in case it works, you could post the results here.
just dont forget that if the ota fails youll soft brick ur phonr and will only be able to recover it via fastboot
freeZbies said:
I dont know if the twrp version would be valid. To apply an OTA, your system must match stick bit by bit, so the most guaranteed way is to flash that firmware via fastboot, but. you could try flashing the twrp version, and in case it. woeks you could post the results here.
just dont forget that if the ota fails youll soft brick ur phonr and will only be able to recover it via fastboot
Click to expand...
Click to collapse
Thanks I'll keep that in mind
Being soft bricked,, wouldn't I be able to use twrp still? Like to flash a valid rom or one of my backups?
Anyways I can't really try it that way since the update hasn't come to me yet I'm on software channel Retca.
Edit : right I forgot that I could just use the official ota available here if I would like to test it.
Chekm8Qc said:
Thanks I'll keep that in mind
Being soft bricked,, wouldn't I be able to use twrp still? Like to flash a valid rom or one of my backups?
Anyways I can't really try it that way since the update hasn't come to me yet I'm on software channel Retca.
Edit : right I forgot that I could just use the official ota available here if I would like to test it.
Click to expand...
Click to collapse
being soft bricked doesnt necessarily mean you can recover it through twrp. OTA's are different of twrp flashables in that it modifies things beyond system partition. I've seen reports from people with other motorola devices who applied an OTA while having a modified system partition, and even though they were able to boot to twrp, flashing a custom Rom or restore a backup wouldn't make the phone boot. Their phones weren't hard bricked, but still they had to fastboot to recover their phones. Anyways, why don't you flash the Twrp flashable if, it's already available (considering you have an unlocked bootloader).
I'm case you have a locked bootloader you may fastboot without executing "fastboot erase userdata" in case you want to try. I did it without losing my data (although I was already in Opp 28.85-16)
but after all I really advice you to flash the twrp zip if u can
Hello Everyone!
I am a total noob. I have rooted many phone but never once reversed the process. Plus with stock moto being 32bit and customs being 64 it is even more complicated for me. And plus all this post about lost IMIE numbers and lost GPT makes me scared.
If i may, can I get step by step guide to relock my bootloader and get OTAs.
I have read most of the tutorials here but couldnt get the confidence to move forward(they all sound a little different)
I have moto G5 plus XT1686 indian version 4Gb/32GB currently running PE 9.0 (GTRCraft). I dont remember which version I had when I unlocked the bootloader. I do have a backup of my persist/efs.
I did see one tutorial but it is for 8.1.0 to stock and IDK if that works for me.
Thanks in advance.
reganEZ said:
Hello Everyone!
I am a total noob. I have rooted many phone but never once reversed the process. Plus with stock moto being 32bit and customs being 64 it is even more complicated for me. And plus all this post about lost IMIE numbers and lost GPT makes me scared.
If i may, can I get step by step guide to relock my bootloader and get OTAs.
I have read most of the tutorials here but couldnt get the confidence to move forward(they all sound a little different)
I have moto G5 plus XT1686 indian version 4Gb/32GB currently running PE 9.0 (GTRCraft). I dont remember which version I had when I unlocked the bootloader. I do have a backup of my persist/efs.
I did see one tutorial but it is for 8.1.0 to stock and IDK if that works for me.
Thanks in advance.
Click to expand...
Click to collapse
Just wipe everything from twrp and then use LMSA OR manually flash the stock ROM and then go for bootloader lock procedure. Then you are done. And you won't lose any IMEI or Persist, so you will be safe.
riyan65 said:
Just wipe everything from twrp and then use LMSA OR manually flash the stock ROM and then go for bootloader lock procedure. Then you are done. And you won't lose any IMEI or Persist, so you will be safe.
Click to expand...
Click to collapse
So just download a TWRP flashable 8.1.0 rom and i m good?
reganEZ said:
So just download a TWRP flashable 8.1.0 rom and i m good?
Click to expand...
Click to collapse
No, download a fastboot flashable ROM, with a TWRP flashable you won't be able to apply OTAs:
https://mirrors.lolinet.com/firmware/moto/potter/official/RETAIL/
Use OPSS28.85-17-4 if you're in the US or OPSS28.85-13-3 for the rest of the world.
Follow the available tutorials for flashing that firmware and after that for relocking the BL (almost the same commands). Make sure you have Minimal ADB & Fastboot
https://androidfilehost.com/?fid=746010030569952951
and Motorola drivers
https://drive.google.com/file/d/0B0WGdtNWubBJYnlDcWRBZXltanc/view
installed on your PC.
For the fastboot commands you can use this flashall.bat:
https://www.dropbox.com/s/zfh67uzfle9hsco/flashallO.bat?dl=0
Wolfcity said:
No, download a fastboot flashable ROM, with a TWRP flashable you won't be able to apply OTAs:
https://mirrors.lolinet.com/firmware/moto/potter/official/RETAIL/
Use OPSS28.85-17-4 if you're in the US or OPSS28.85-13-3 for the rest of the world.
Follow the available tutorials for flashing that firmware and after that for relocking the BL (almost the same commands). Make sure you have Minimal ADB & Fastboot
https://androidfilehost.com/?fid=746010030569952951
and Motorola drivers
https://drive.google.com/file/d/0B0WGdtNWubBJYnlDcWRBZXltanc/view
installed on your PC.
For the fastboot commands you can use this flashall.bat:
https://www.dropbox.com/s/zfh67uzfle9hsco/flashallO.bat?dl=0
Click to expand...
Click to collapse
ATTENTION:
You will need the appropriate version of the firmware according to your device version
You need the same or later version of firmware that you have when you unlock your BL
Example: If when you unlock your bl you was on NPNS25.137-33-11 you need the same (or later) complete firmware because you can't downgrade.
This is a part of the bootloader locking tutorial here on XDA. Does this make a difference?
reganEZ said:
ATTENTION:
You will need the appropriate version of the firmware according to your device version
You need the same or later version of firmware that you have when you unlock your BL
Example: If when you unlock your bl you was on NPNS25.137-33-11 you need the same (or later) complete firmware because you can't downgrade.
This is a part of the bootloader locking tutorial here on XDA. Does this make a difference?
Click to expand...
Click to collapse
+ i tried the method and it says "slot not found" error
reganEZ said:
ATTENTION:
You will need the appropriate version of the firmware according to your device version
You need the same or later version of firmware that you have when you unlock your BL
Example: If when you unlock your bl you was on NPNS25.137-33-11 you need the same (or later) complete firmware because you can't downgrade.
This is a part of the bootloader locking tutorial here on XDA. Does this make a difference?
Click to expand...
Click to collapse
You have to use the firmware you were on before you changed to a custom ROM or a newer one.
Never use an older one, downgrading can brick your device.
reganEZ said:
+ i tried the method and it says "slot not found" error
Click to expand...
Click to collapse
The "slot not found" error is normal, it's related to A/B devices with more than one recovery slot like Pixel phones. The commands should work nevertheless. Ignore the message.
I reloaded my G5 Plus with POTTER_RETAIL_7.0_NPNS25.137-93-4_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip sucessfuly. However, I was not able to relock the bootloader :
C:\Moto potter>fastboot oem lock
...
(bootloader) Still require signed boot.img
It got OTA'ed to Oreo 8.1 latter on, but still bootloader unlocked.
I just went through the flashing process to POTTER_RETAIL_8.1.0_OPSS28.85-17-4, same damned thing.
Everything works fine, excpet for Netflix that can't be installed no more and my bank software who keeps complaining.
I just dunno what to do to relock, any advice ?
Wolfcity said:
You have to use the firmware you were on before you changed to a custom ROM or a newer one.
Never use an older one, downgrading can brick your device.
The "slot not found" error is normal, it's related to A/B devices with more than one recovery slot like Pixel phones. The commands should work nevertheless. Ignore the message.
Click to expand...
Click to collapse
Hello, Thank you for your reply.
I understand I cannot use an older firmware. I remember I unlocked my BL when I was in 7.0 itself, but when I installed the Arrow 9.0, I flashed the 8.1 firmware zip to get the NFC and Fingerprint working. So now my ro.build fingerprint doesnt tell me which firmware build i am on it just says "8.1"
I am confused what to do. Should I download the latest 8.1 moto rom and flash it? I tried the TWRP flashable rom but the phone just goes upto Hello Moto bootscreen and then bootloops.
I erased everything and flashed PE 9.0 again.
reganEZ said:
Hello, Thank you for your reply.
.....Should I download the latest 8.1 moto rom and flash it?.......
Click to expand...
Click to collapse
That's what I would do. If you flash the latest firmware it can't be older as the one you're originally coming from.
Follow my previous post:
Wolfcity said:
No, download a fastboot flashable ROM, with a TWRP flashable you won't be able to apply OTAs:
https://mirrors.lolinet.com/firmware/moto/potter/official/RETAIL/
Use OPSS28.85-17-4 if you're in the US or OPSS28.85-13-3 for the rest of the world.
Follow the available tutorials for flashing that firmware and after that for relocking the BL (almost the same commands). Make sure you have Minimal ADB & Fastboot
https://androidfilehost.com/?fid=746010030569952951
and Motorola drivers
https://drive.google.com/file/d/0B0WGdtNWubBJYnlDcWRBZXltanc/view
installed on your PC.
For the fastboot commands you can use this flashall.bat:
https://www.dropbox.com/s/zfh67uzfle9hsco/flashallO.batflashallO.bat?dl=0
Click to expand...
Click to collapse
Wolfcity said:
That's what I would do. If you flash the latest firmware it can't be older as the one you're originally coming from.
Follow my previous post:
Click to expand...
Click to collapse
Hello Sir, i was on OPSS28.85-13-5 when i flashed custom rom. The link you provided lists OPSS28.85-13-3 as the latest firmware. Should i install that? I am from India if that helps. Help please.
MrAshuBrar said:
Hello Sir, i was on OPSS28.85-13-5 when i flashed custom rom. The link you provided lists OPSS28.85-13-3 as the latest firmware. Should i install that? I am from India if that helps. Help please.
Click to expand...
Click to collapse
Take this one:
85-13-5
https://forum.xda-developers.com/g5-plus/how-to/official-oreo-coming-soon-t3779098/post78844908
CanadianGixxerman said:
I reloaded my G5 Plus with POTTER_RETAIL_7.0_NPNS25.137-93-4_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip sucessfuly. However, I was not able to relock the bootloader :
C:\Moto potter>fastboot oem lock
...
(bootloader) Still require signed boot.img
It got OTA'ed to Oreo 8.1 latter on, but still bootloader unlocked.
I just went through the flashing process to POTTER_RETAIL_8.1.0_OPSS28.85-17-4, same damned thing.
Everything works fine, excpet for Netflix that can't be installed no more and my bank software who keeps complaining.
I just dunno what to do to relock, any advice ?
Click to expand...
Click to collapse
Flash all the system files while locking. (0-8). Older locking guides have only 0-4. Newer firmware has 9 system files.
Wolfcity said:
Take this one:
85-13-5
https://forum.xda-developers.com/g5-plus/how-to/official-oreo-coming-soon-t3779098/post78844908
Click to expand...
Click to collapse
Thank you so much ?