Is it always necessary to reboot when making changes on cpu governors on kernel audiutor or i can just change governers and forget?
Chief Sam said:
Is it always necessary to reboot when making changes on cpu governors on kernel audiutor or i can just change governers and forget?
Click to expand...
Click to collapse
if you're using kernel adiutor then you can enable set on boot
Related
Does gingerxperia support overclock by itself?
I see in cyanogenmod setting overclock option and when i change it to (for ex. 729 mhz) i go back to home screen and the return to overclock setting i see it return to default (600 mhz). Why?!!
Also SetCPU doesn't work!
Do i have to install custom kernal??
*In MiniCM-7 overclock works fine from cyanogenmod settings.
1Fawwaz said:
Does gingerxperia support overclock by itself?
I see in cyanogenmod setting overclock option and when i change it to (for ex. 729 mhz) i go back to home screen and the return to overclock setting i see it return to default (600 mhz). Why?!!
Also SetCPU doesn't work!
Do i have to install custom kernal??
*In MiniCM-7 overclock works fine from cyanogenmod settings.
Click to expand...
Click to collapse
You have to instal either the OC Module for stock kernel or any custom kernel which supports OC'ing. Are you sure it worked in MiniCM-7, except from having the ability to check the new amount of MHz?
TimeWasterNL said:
You have to instal either the OC Module for stock kernel or any custom kernel which supports OC'ing. Are you sure it worked in MiniCM-7, except from having the ability to check the new amount of MHz?
Click to expand...
Click to collapse
you mean this: Modules for stock kernel.: Flash with CWM. This package contains: AnDyX's Dualtouch for Cypress, AnDyX's smartass governor, ext3/4, X8Gesture, X8MDDI, X8UV.
but what is that "smartass governor and the x8mddi"??
1Fawwaz said:
you mean this: Modules for stock kernel.: Flash with CWM. This package contains: AnDyX's Dualtouch for Cypress, AnDyX's smartass governor, ext3/4, X8Gesture, X8MDDI, X8UV.
but what is that "smartass governor and the x8mddi"??
Click to expand...
Click to collapse
x8 mddi is a module that reduce the lag experienced by all custom roms. governor is the way the phone control the cpu. smartass governor operates by reducing ur cpu speed when the screen is off and increasing it when the screen is on.
Sent from my X8 using xda premium
1Fawwaz said:
Does gingerxperia support overclock by itself?
I see in cyanogenmod setting overclock option and when i change it to (for ex. 729 mhz) i go back to home screen and the return to overclock setting i see it return to default (600 mhz). Why?!!
Also SetCPU doesn't work!
Do i have to install custom kernal??
*In MiniCM-7 overclock works fine from cyanogenmod settings.
Click to expand...
Click to collapse
Im used before Gingerxperia v17 with stock kernel 2.6.29 and it allowed overclocking.No problems!Now i using same ROM with nAa kernel 2.6.29-nAa-08 and have no issues.Do you know when you will install custom kernel you MUST have opened bootloader!
overclock
i have 2.6.29 and i cant overclock my x8 , can anybody help me....plz
my phone gets laggy after installing kuro kernel.. did anyone have this problem too,or it is just me??
you must have NO FRILLS or other cpu frequency changer.
then change the max fre. to 832 then min fre. to 312
governor - smartassV2
i/o - sio
you also must root your phone
the main interest of kuro's kernel :
1. save more batteries
2. decent performance
if you want more performance install meruk's kernel
if u want performance with kuro's kernel
root ur phone and install rom toolbox
go to cpu control
chose
- powercats = lazy --> performance
- blackcats = smartassv2 --> balanced setting
- activecats = intellidemand --> battery saver
push thanks button
Cican49 said:
my phone gets laggy after installing kuro kernel.. did anyone have this problem too,or it is just me??
Click to expand...
Click to collapse
Its becoz its a battery saving Kernel so there will be some lag for sure but if u want smooth performance use no frills cpu and change your governer to other like activecats.
Cican49 said:
my phone gets laggy after installing kuro kernel.. did anyone have this problem too,or it is just me??
Click to expand...
Click to collapse
try
governer:bcm21553
sio:cfq
done!!!
enjoy your device without lag
Hello,
I don't know if this is in the right section but I hope I am so I'll ask nontheless. Is there a kernel out there that allows me to overclock my Galaxy S6 Edge+ cpu(s)? Any help would be greatly appreciated. I'm currently running arter97 kernel combined with a custom rom. However, I'm not able to overclock my CPU with any of the rooted cpu overclock apps such as, but not excluded: No-Frills CPU Control, Kernel Adiutor.
Once again, any help would be appreciated.
Thank you very much!
Why would you overclock it? Edge+ CPU already packs a lot of power..
reload472 said:
Hello,
I don't know if this is in the right section but I hope I am so I'll ask nontheless. Is there a kernel out there that allows me to overclock my Galaxy S6 Edge+ cpu(s)? Any help would be greatly appreciated. I'm currently running arter97 kernel combined with a custom rom. However, I'm not able to overclock my CPU with any of the rooted cpu overclock apps such as, but not excluded: No-Frills CPU Control, Kernel Adiutor.
Once again, any help would be appreciated.
Thank you very much!
Click to expand...
Click to collapse
http://forum.xda-developers.com/s6-...pment/kernel-skyhigh-tw-5-1-1-kernel-t3261198
OneTruth said:
Why would you overclock it? Edge+ CPU already packs a lot of power..
Click to expand...
Click to collapse
Why? Because we can.
bolek76 said:
http://forum.xda-developers.com/s6-...pment/kernel-skyhigh-tw-5-1-1-kernel-t3261198
Click to expand...
Click to collapse
Yes. My SkyHigh kernel has some default tweaks, but many user optional controls including OC and UC for CPU and GPU etc. The default clock limits are set at stock, so user can find what's best for their needs and device asv_summary. There's also a tonne of features
Enjoy
UpInTheAir said:
Why? Because we can.
Yes. My SkyHigh kernel has some default tweaks, but many user optional controls including OC and UC for CPU and GPU etc. The default clock limits are set at stock, so user can find what's best for their needs and device asv_summary. There's also a tonne of features
Enjoy
Click to expand...
Click to collapse
thank you so much for your kernel
UpInTheAir said:
Why? Because we can.
Yes. My SkyHigh kernel has some default tweaks, but many user optional controls including OC and UC for CPU and GPU etc. The default clock limits are set at stock, so user can find what's best for their needs and device asv_summary. There's also a tonne of features
Enjoy
Click to expand...
Click to collapse
Then go ahead
I played with some settings of interactive kernel (using kernel auditor) .See screen shots below and change accordingly ,this will lower CPU temp. and increase battery backup. 1st one is for big cores.Hope u will get same results as I.
Please share screenshots as jpg files in your attachment.
Thanks
sanjib734 said:
I played with some settings of interactive kernel (using kernel auditor) .See screen shots below and change accordingly ,this will lower CPU temp. and increase battery backup. 1st one is for big cores.Hope u will get same results as I.
Click to expand...
Click to collapse
I think lowering the minimun frequency to 400mhz will help more.
How about scores? Please tell more details, are you using RN3 or RN3P (Snapdragon)?
Which rom? Which kernel ? I havent seen any custom kernel yet for the RN3/RN3P
aaz03 said:
How about scores? Please tell more details, are you using RN3 or RN3P (Snapdragon)?
Which rom? Which kernel ? I havent seen any custom kernel yet for the RN3/RN3P
Click to expand...
Click to collapse
this is for rn3 SD and it the default stock kernel
Rajdip said:
this is for rn3 SD and it the default stock kernel
Click to expand...
Click to collapse
Ooooh so it is possible to edit stock kernel settings with kernel adiutor? I don't have a rn3p yet so I'don't like to know , what exactly are the options you can edit ? Which governors are available?
aaz03 said:
Ooooh so it is possible to edit stock kernel settings with kernel adiutor? I don't have a rn3p yet so I'don't like to know , what exactly are the options you can edit ? Which governors are available?
Click to expand...
Click to collapse
yeah you can provided you have root access, governors available are ondemand, userspace, perfomance, interactive,powersave.
Hello everyone, my cpu frequencies are going insane. I cant lock them to minimum and maximum frequencies using any kernel tuning apps. I'm in invicta OS right now.... It happens in every custom rom and custom kernel I tried so far. The cpu governors keep resetting to default governor. :crying: Is there any solution for this issue?
Amogh Thambi said:
Hello everyone, my cpu frequencies are going insane. I cant lock them to minimum and maximum frequencies using any kernel tuning apps. I'm in invicta OS right now.... It happens in every custom rom and custom kernel I tried so far. The cpu governors keep resetting to default governor. :crying: Is there any solution for this issue?
Click to expand...
Click to collapse
Please describe some more details: device XT... , rom and version, which kernel tuning apps etc., does kernel apps receive root access, do you set it at boot so the settings won't be reset after reboot?
strongst said:
Please describe some more details: device XT... , rom and version, which kernel tuning apps etc., does kernel apps receive root access, do you set it at boot so the settings won't be reset after reboot?
Click to expand...
Click to collapse
XT1643 in invicta OS Rom with default kernel, root privileges were given to kernel adiutor app, busybox is installed and set on boot is on but still the frequencies go insane like they're drunk and it's heating up my phone. I had same issues with all custom roms and custom kernels. I tried different tuning apps from playstore but the result is same.
Amogh Thambi said:
XT1643 in invicta OS Rom with default kernel, root privileges were given to kernel adiutor app, busybox is installed and set on boot is on but still the frequencies go insane like they're drunk and it's heating up my phone. I had same issues with all custom roms and custom kernels. I tried different tuning apps from playstore but the result is same.
Click to expand...
Click to collapse
Please make a screenshot of the frequency tag. "insane" doesn't tell me anything...
strongst said:
Please make a screenshot of the frequency tag. "insane" doesn't tell me anything...
Click to expand...
Click to collapse
As you can see the screenshots.... The minimum frequency i set is to 400mhz for cpu... But after sometime the minimum frequency sets itself to 900mhz....... And this change in frequencies is heating up my device. Why can't i lockdown the minimum and Maximum frequencies? does it have anything to do with cpu hotplug provided in invicta os?
Amogh Thambi said:
Why can't i lockdown the minimum and Maximum frequencies?
Click to expand...
Click to collapse
Quoting EX Kernel Manager,
Frequencies and cores are controlled by system processes. These settings may not persist.
Click to expand...
Click to collapse
Applicable to all kernels, and kernel managers. I would suggest you try the Lightning Blade profile (check the forum, it's here. Search.) as it has always kept my device cool.