Database Users

[STOCK ROM][FTF][Prerooted][Deodex patch] 17.1.2.A.0.314 (NCB) for Z2 tablet SGP511

Hi
Here are some version of latest SGP511 Nordic Combined firmware.
Nandroid backup are highly recommended.
Stock ftf install via flashtool:
https://mega.co.nz/#!kcxxjaLA!itErjRi2fYPPswal-c7XasF_lAvPKyY4GwEzY3xgHZ0
http://www.mediafire.com/download/x....A.0.314_Customized_NCB_(Nordic_Combined).ftf
Prerooted version flash via custom recovery. This install also SuperSu and DualRecovery:
https://mega.co.nz/#!hdZV1CBY!MJIOjMoN8uSposyaV6FyQOWeuNvQ2tSsHjw4F0rBakY
http://www.mediafire.com/view/bosul56grj4dbt8
Deodex patch flash via custom recovery and wipe dalvik cache:
https://mega.co.nz/#!JYxzFD4T!mBzCWiF9fHOFQYQ-9fuoiq2DMxYxVk9LYJkXKQymQEo
http://www.mediafire.com/view/6ty4vyx43aybovx
Credits: @Androxyde, @Chainfire, @Nut, @LaguCool , @zxz0O0 and @RyokoN

Thanks, I managed to update my SGP511 with this image using Flashtool (without wiping data, all setting were kept).
Rooting with Easyroot V11 took two tries, but works fine. Also reinstalled dual recovery again without problems.

MrMagic said:
Thanks, I managed to update my SGP511 with this image using Flashtool (without wiping data, all setting were kept).
Rooting with Easyroot V11 took two tries, but works fine. Also reinstalled dual recovery again without problems.
Click to expand...
Click to collapse
Thanks your feedback. You are right. No need to wipe anything.

kulvertti said:
Thanks your feedback. You are right. No need to wipe anything.
Click to expand...
Click to collapse
Ohh awesome to know
Had enough of waiting on my Swedish model that I just needed to update it

Just updated my tablet, and feels good to finaly be able to use a stylus on it. It's not perfect but alot better then before then i had to push really hard to get any sort of response with a stylus. The small issues i have using stylus now could be due to the stylus, i many times leaning it a bit to left or right and it dont always do as i wanted, but could be that im using a thinner stylus then i used to have so not enough of it are in contact with the tablet.

Aotw said:
Just updated my tablet, and feels good to finaly be able to use a stylus on it. It's not perfect but alot better then before then i had to push really hard to get any sort of response with a stylus. The small issues i have using stylus now could be due to the stylus, i many times leaning it a bit to left or right and it dont always do as i wanted, but could be that im using a thinner stylus then i used to have so not enough of it are in contact with the tablet.
Click to expand...
Click to collapse
Thanks for your feedback. I agree you that this ain't the most stylus friendly device but with right stylus still usable.

kulvertti said:
Thanks for your feedback. I agree you that this ain't the most stylus friendly device but with right stylus still usable.
Click to expand...
Click to collapse
After this update it works almost as is thould for me, but as i mentiond in my previous post i could be due to the thinner top of the stylus and how i hold it. Will try use some others to check.

wrong?
sryyy

flashed my 512 with flashtool, no problems. Thanks!
Edit: rooted with easy root v12.
Seemed like easyroot kind of hung after it said 'cleaning up' but a quick download of terminal emulator showed I could su/root no problem. (I think)

ChodTheWacko said:
flashed my 512 with flashtool, no problems. Thanks!
Edit: rooted with easy root v12.
Seemed like easyroot kind of hung after it said 'cleaning up' but a quick download of terminal emulator showed I could su/root no problem. (I think)
Click to expand...
Click to collapse
Just run it again and you be fine.

Can someone please mirror this file somewhere different from mega? The Italian gov blocked it and I'm unable to access it (nor I can change my DNS because of my ISP restrictions)

this firmware works great with my z2.
Thank you so much. this firmware works great with my z2.
Wifi speed now changes from 70 MBps to 125 MBps.
Only onthing is need to re-install some apps like Viber, Swype ...

GabMus said:
Can someone please mirror this file somewhere different from mega? The Italian gov blocked it and I'm unable to access it (nor I can change my DNS because of my ISP restrictions)
Click to expand...
Click to collapse
I make mirror for you. Uploading now and should be ready about hour and half.
Here are mirrors for you:
https://www.mediafire.com/?x4c5o2d099d1604
https://dl.dropboxusercontent.com/u/25635282/SGP511_17.1.2.A.0.314_Customized%20NCB%20(Nordic%20Combined).ftf
https://drive.google.com/file/d/0B4xHeTeWdVxGUmE2SGxKMmV4bVE/edit?usp=sharing

hungnm02 said:
Thank you so much. this firmware works great with my z2.
Wifi speed now changes from 70 MBps to 125 MBps.
Only onthing is need to re-install some apps like Viber, Swype ...
Click to expand...
Click to collapse
Thank you for feedback.

Thank you kindly

GabMus said:
Thank you kindly
Click to expand...
Click to collapse
You are welcome.

Hey Guys,
Did you see any improvement in touch bug with this version?
I'm on 17.1.1.A.0.402 and SGP511, I've some problem with scroll specially when the feature "double tap to wake up" is enabled.
Cheers,

chentz78 said:
Hey Guys,
Did you see any improvement in touch bug with this version?
I'm on 17.1.1.A.0.402 and SGP511, I've some problem with scroll specially when the feature "double tap to wake up" is enabled.
Cheers,
Click to expand...
Click to collapse
Hi bro
I haven't noticed any touch bug with this device and firmware. Even stylus is usable. Try it and report back.

kulvertti said:
Hi bro
I haven't noticed any touch bug with this device and firmware. Even stylus is usable. Try it and report back.
Click to expand...
Click to collapse
Hi,
I upgraded my SGP-511 yesterday with this version and the touch sensibility is really better.
Just a comment about the problem. I was looking for some fix for that problem when I found that with CM 11 the tablet doesn't have this kind of problem. In my case I didn't install the CM to keep the warranty.

chentz78 said:
Hi,
I upgraded my SGP-511 yesterday with this version and the touch sensibility is really better.
Just a comment about the problem. I was looking for some fix for that problem when I found that with CM 11 the tablet doesn't have this kind of problem. In my case I didn't install the CM to keep the warranty.
Click to expand...
Click to collapse
Hi mate. Thanks for you feedback.

[ROM][TW][LP][SM-T807T] GWiz ROM

I am proud to present my first custom rom!
GWiz (Used to be Superskilled) is a ROM that has minor tweaks here and there and some debloating. This is meant to be an basic rom for users to enjoy. The reason its called Gwiz is that because I will be making tons of themes for this in which you may say Gee wiz! No? Okay. Dont expect updates as this is an basic rom really.
Features
-Knox Removed-ish (LP)
-Lightly- Debloated
-Many more
-Very basic as you can see..
Installation
1. Have TWRP or CWM recovery installed (Use T805 recoveries)
2. Download the ROM
3.Backup your stuff in TWRP or CWM
4. Wipe dalvik,data, and caches (AKA Factory reset)
5.Install the ROM
6. Reboot and wait
7. Done?
Contributors​-Samsung for making the Tab S
-AndroidGirl for the support and testing the rom
-Rip for testing cfautoroot. Without him then this rom would never be here
-Tkkg1994 For the huge amount of help! WIthout him, I wouldn't make any roms!He taught me everything to get this going.
-ArchiKitchen Made the custom rom process easier
-Mega for hosting my stuff [STRIKE NO LONGER USING MEGA}
-AndroidFileHost for hosting all my files!
-Support from others
- Many many more
Downloads
KITKAT:
Superskilled V1: https://mega.co.nz/#!floWBIpL!d48imruDSwNfzksoLeNchFOskrzgg4w6z1ZsjmRuDQE​
LOLLIPOP:
GWiz TouchWiz Lollipop Untested: https://www.androidfilehost.com/?fid=24052804347764781
Gwiz TouchWIlz Lollipop Deodexed untested: N/A atm
Note
I am not held responsible for any damages done to your device because of this rom. Your the one choosing to flash it. I try to make things bug free so things like this wont happen software wise.​

This is reserved for Lollipop Themes.
T807T THEME COLLECTION:
coming soon

Discreet Blue theme for Tab S 10.5 devices! http://forum.xda-developers.com/showthread.php?p=59598280

The theme didn't work for me...I got this pop-up unfortunately, %1$s has stopped.

AndroidGirl22 said:
The theme didn't work for me...I got this pop-up unfortunately, %1$s has stopped.
Click to expand...
Click to collapse
Oh... Might be some differences in the apks. Ill post a guide on how to the touchwiz holo look with xposed

Much appreciated!

Looks good let's give it a test drive

Good stuff !

UpInTheAir said:
Good stuff !
Click to expand...
Click to collapse
Thanks! Thought some users would like a basic custom rom. Currently uploading the sprint(T807P) now incase somone needs it. Whenever the snapdragon tab s gets a custom recovery, I can make another basic rom for them Love your kernels

AndroidGirl22 said:
Much appreciated!
Click to expand...
Click to collapse
Can you test this theme for me? I started workong on it and it works fine on my T800. Of course make a backup https://www.dropbox.com/s/fehgzqqiu6rbmon/Theme Test 2 DUHAsianSKILLZ.zip?dl=0
Just flash it in twrp

Sure...out and about in an ice storm right now, when I get back home I will and let you know?

Seems to work...no force closes or anything, so that's definitely good. How much is supposed to be themed?

AndroidGirl22 said:
Seems to work...no force closes or anything, so that's definitely good. How much is supposed to be themed?
Click to expand...
Click to collapse
Should look like this. Of course its still beta

DUHAsianSKILLZ said:
Should look like this. Of course its still beta
Click to expand...
Click to collapse
I think we have a hit then! Seems to match what I'm seeing. Thanks again for all you do?

AndroidGirl22 said:
I think we have a hit then! Seems to match what I'm seeing. Thanks again for all you do?
Click to expand...
Click to collapse
Updates will be in the second post of there is any. Since there seems to be no developers working on your devices, I thought I might chip in and help out Since Im not good with including things into roms, I cant include themes into roms or extra things since I dont know how. But thanks for testing!

Theme updated. Thread here http://forum.xda-developers.com/showthread.php?p=59598280

How do I root this tablet? I'm interested in trying this rom but don't know how to root the tablet. Thanks!

primetime34 said:
How do I root this tablet? I'm interested in trying this rom but don't know how to root the tablet. Thanks!
Click to expand...
Click to collapse
Here you go. http://forum.xda-developers.com/showthread.php?p=59089654

Now that I'm back from my few month dissapearing act I'm totally going to try this. Good to see you creating a ROM. First one for the 807T! Pretty sure anyways I haven't checked the forums much yet. Thank you for your hard work sir!

Ripx88 said:
Now that I'm back from my few month dissapearing act I'm totally going to try this. Good to see you creating a ROM. First one for the 807T! Pretty sure anyways I haven't checked the forums much yet. Thank you for your hard work sir!
Click to expand...
Click to collapse
No problem! Without you the T807T users would have no way of getting root ?

Note 3 - Air Command - Touch unresponsive

Hello,
I've tried searching for this issue but didn't find the same issue, although there were issues where finger touch didn't work but s-pen did.
I have a Note-3 and got a recent patch update from Samsung after the release of 5.0. I believe from then on, the below issue started occurring.
At any screen, if i remove s-pen, the 'air command' comes up and the screen goes completely unresponsive to finger as well as s-pen. After few seconds, i get a pop-up saying "Process system isn't responding, Do you want to close it". I'm able to touch 'wait' or 'ok' but no matter which option i choose, within 3 second the phone does a quick reboot. in that 3 seconds the screen is still unresponsive to touch.
If i leave the s-pen out while reboot, everything is fine until i press the button on the s-pen to bring the 'air command'. If i change the option under 'detachment options' to any thing other than 'air command' the phone is normal while removing the s-pen and i can use s-pen until i press the button on the s-pen to bring 'air command'.
Note: I've not rooted this phone since 5.0 got released/installed.
Any ideas people?
Regards,
Rubert.

Hi, thank you for using XDA Assist. The best place to ask questions about your device in it's specific forum here, http://forum.xda-developers.com/galaxy-note-3 I'm going to ask a moderator to move this question to, http://forum.xda-developers.com/galaxy-note-3/help

jd1639 said:
Hi, thank you for using XDA Assist. The best place to ask questions about your device in it's specific forum here, http://forum.xda-developers.com/galaxy-note-3 I'm going to ask a moderator to move this question to, http://forum.xda-developers.com/galaxy-note-3/help
Click to expand...
Click to collapse
Thanks a lot mate.

Delete

rubertjack said:
Hello,
I've tried searching for this issue but didn't find the same issue, although there were issues where finger touch didn't work but s-pen did.
I have a Note-3 and got a recent patch update from Samsung after the release of 5.0. I believe from then on, the below issue started occurring...
...Note: I've not rooted this phone since 5.0 got released/installed.
Any ideas people?
Regards,
Rubert.
Click to expand...
Click to collapse
You could try clearing the Data/cache for anything in Apps that looks like it belongs to the SPen - I haven't used TW Stock for some time so can't check the options.

Journyman16 said:
You could try clearing the Data/cache for anything in Apps that looks like it belongs to the SPen - I haven't used TW Stock for some time so can't check the options.
Click to expand...
Click to collapse
Forgot to mention in the original post. I've actually did a factory reset and still the problem persists.

rubertjack said:
Forgot to mention in the original post. I've actually did a factory reset and still the problem persists.
Click to expand...
Click to collapse
You probably won't like this but go CM and buy the SPenCommand app - works great! (sorry - I'm not big on Sammy ROM's but you might try Alliance...?)

I would love to use CM. But unfortunately my phone is n900 and still there are no aosp roms. I don't want and like to use modified stock rom.

rubertjack said:
I would love to use CM. But unfortunately my phone is n900 and still there are no aosp roms. I don't want and like to use modified stock rom.
Click to expand...
Click to collapse
Before I started on Temasek's CM ROMs I was using Alliance - stock/modded ROM. You could give it a try and see if it helps?

Journyman16 said:
Before I started on Temasek's CM ROMs I was using Alliance - stock/modded ROM. You could give it a try and see if it helps?
Click to expand...
Click to collapse
I shall give it a try. just wondering, are you guys aware of any good and working aosp roms out there for n-900 exynos?

rubertjack said:
I shall give it a try. just wondering, are you guys aware of any good and working aosp roms out there for n-900 exynos?
Click to expand...
Click to collapse
You could try on the cyanogen site. Or do a search at the parent forum Galaxy Note 3

There's a Q&A thread for Dr.Ketan's ROM for n900 - try in there for a link to the ROM? http://forum.xda-developers.com/galaxy-note-3/help/qa-k14-dr-ketan-custom-control-rom-t2914663 Not sure if it's AOSP or not but Dr.Ketan seems to know what he's doing from other threads I have seen.

As of now only CM team is building beta ROM for n900. Per my findings, many failed because of the octa core and too many issues. Will wait for CM to release an official one. I too hate Sammy. poor DPI.

Succefully instaled noble note 4 rom!!

As the title says, i managed to install to my N915FY the "NOBLE Note 7 Edge UX 3.0" rom..Rom is working fine anf fast, testing it now ,camera has a few issues ,but the new fresh look of the rom is great.
Link or the rom here http://forum.xda-developers.com/note-4/snapdragon-dev/rom-noble-rom-t3392289
I dont know if it will work for you,but i will explain what i did:
Of course i was in MM 6.0.1 stock ,rooted and with TWRP.Flashed Mickey387 latest [v2.0] and played a bit.Then did ALL wipes and flashed NOBLE rom.After finished flashing,rom didnt boot and stuck at Samsung logo.
Then booted again to recovery and flashed lastest Mickey387 kernel.
After 5-8 minutes rom booted fine and made my setup.
That's it ,didnt flashed bootloader or modem, till now all fine ,testing more but as i said before its a new ,fresh look for my edge.
Try it yourselves but take your backup always.

Wow, thanks for information, maybe later i try.
Please attach a few screenshots...
UPD: thanks for screenshots
In this rom do you have a stock bluelight filter ? like note7 ?

You must test this one my bro http://forum.xda-developers.com/note-4/snapdragon-dev/rom-t3440223

Naoufalstitou said:
You must test this one my bro http://forum.xda-developers.com/note-4/snapdragon-dev/rom-t3440223
Click to expand...
Click to collapse
Did you tried that rom ,mate?I have already download it to test later..

xenkato said:
Did you tried that rom ,mate?I have already download it to test later..
Click to expand...
Click to collapse
As i read that thread too much bug in that atm. It worth to wait some weeks a better release, i think...

yarik88 said:
Wow, thanks for information, maybe later i try.
Please attach a few screenshots...
UPD: thanks for screenshots
In this rom do you have a stock bluelight filter ? like note7 ?
Click to expand...
Click to collapse
No ,only outdoor mode ,no bluelight filter.
-----------
The developer has posted his rom for the NOTE EDGE here: http://forum.xda-developers.com/note-edge/development/rom-nobel-rom-t3441769
cudos to him and his work he has done a very nice effort [Albe96].
All discussions about the rom should post there.
Thanks Albe96!!

do you have edge panel features, spen, nfc and bluetooth after installing that rom?
actually in general, my question is can we flash n910g to n915g?

Works very good. It's fast and smooth and stable on my Note 4 (910f).

erwinsie said:
do you have edge panel features, spen, nfc and bluetooth after installing that rom?
actually in general, my question is can we flash n910g to n915g?
Click to expand...
Click to collapse
Answer is in this thread
http://forum.xda-developers.com/note-edge/help/flash-note-4-rom-note-edge-t3272906
Sent from my SM-N915L using XDA-Developers mobile app

The permissions for apps keep on resetting on every boot.

Touchscreen Problems

Dear XDA-Community,
I have a really strange problem with my ZUK Z1 touchscreen, but only with ROMs with a build date after the 22th of Dezember 2016.
First I thought it's because I didn't wipe my phone fully before flashing the ROMs, but yesterday I tried it after wiping my phone completely.
But didn't work neither.
So after flashing the ROM and rebooting my phone, I "couldn't" control my phone, but then I realized that the touch reply was just in the "wrong place" like I touched in bottom and the output was in the middle of the screen.
I didn't have this problem before, and i researched all over the internet, if it's problem with the ROM but it doesn't seem so. Like I'm the only one with such an issue.
I hope anyone could help me.
Best regards
johannestheg

johannestheg said:
Dear XDA-Community,
I have a really strange problem with my ZUK Z1 touchscreen, but only with ROMs with a build date after the 22th of Dezember 2016.
First I thought it's because I didn't wipe my phone fully before flashing the ROMs, but yesterday I tried it after wiping my phone completely.
But didn't work neither.
So after flashing the ROM and rebooting my phone, I "couldn't" control my phone, but then I realized that the touch reply was just in the "wrong place" like I touched in bottom and the output was in the middle of the screen.
I didn't have this problem before, and i researched all over the internet, if it's problem with the ROM but it doesn't seem so. Like I'm the only one with such an issue.
I hope anyone could help me.
Best regards
johannestheg
Click to expand...
Click to collapse
It was the same for me. Becomes more and more and finally also in twrp the digitizer wasn't working anymore. I don't had a wrong calibration.

strongst said:
It was the same for me. Becomes more and more and finally also in twrp the digitizer wasn't working anymore. I don't had a wrong calibration.
Click to expand...
Click to collapse
Could you fix it? Or did you buy a new phone?
And if you fixed it, how did you do so?
best regards

johannestheg said:
Could you fix it? Or did you buy a new phone?
And if you fixed it, how did you do so?
best regards
Click to expand...
Click to collapse
I sent it back for warranty.

strongst said:
I sent it back for warranty.
Click to expand...
Click to collapse
Damn. Shouldn't have bought it on such a unserious site^^
If someone has a solution, pls tell me
How I said, it's working perfectly on CM 14.1, so it seems like a software problem

johannestheg said:
Damn. Shouldn't have bought it on such a unserious site^^
If someone has a solution, pls tell me
How I said, it's working perfectly on CM 14.1, so it seems like a software problem
Click to expand...
Click to collapse
Few users reported touch issue solved after flashing Radi active kernel in N. Did u try latest NuceaRom or Mokee?

Narasimha12 said:
Few users reported touch issue solved after flashing Radi active kernel in N. Did u try latest NuceaRom or Mokee?
Click to expand...
Click to collapse
No I didn't, but I'll give it a try, thank you mate
But I wonder if the problem is solved then completely, or only if you have installed NucleaRom/Mokee

johannestheg said:
No I didn't, but I'll give it a try, thank you mate
But I wonder if the problem is solved then completely, or only if you have installed NucleaRom/Mokee
Click to expand...
Click to collapse
My understanding is that, something messed in upstream lineage OS, which effected couple of updates of NucleaRom and initial testing builds of Mokee. With the help of Radioactive kernel developers, thankfully Mokee managed to debug it.
Does screen issue happens in lower version of Android too? Like MM & L? if so I'm not sure this is going to help.

Narasimha12 said:
My understanding is that, something messed in upstream lineage OS, which effected couple of updates of NucleaRom and initial testing builds of Mokee. With the help of Radioactive kernel developers, thankfully Mokee managed to debug it.
Does screen issue happens in lower version of Android too? Like MM & L? if so I'm not sure this is going to help.
Click to expand...
Click to collapse
No didn't ever have this problem before, so thanks for the good news, I'll update after testing

So I tried it with the Tesla Rom and it worked fine
Thanks for the help

johannestheg said:
So I tried it with the Tesla Rom and it worked fine
Thanks for the help
Click to expand...
Click to collapse
Bingo
Sent from my Zuk Z1 using XDA Labs

Same problem with my Zuk Z1.
Today I flashed de unofficial LineageOS and the touchscreen don't work.
I flashed again the old ROM (October CM) and the touchscreen worked again.
I tried later with full wipe... Same problem.
From: Me
Via: Huawei Mate 9 (MHA-L09) - Tapatalk
To:

sethnet said:
Same problem with my Zuk Z1.
Today I flashed de unofficial LineageOS and the touchscreen don't work.
I flashed again the old ROM (October CM) and the touchscreen worked again.
I tried later with full wipe... Same problem.
From: Me
Via: Huawei Mate 9 (MHA-L09) - Tapatalk
To:
Click to expand...
Click to collapse
Latest lineage OS doesn't have this problem. If you are still getting the touch screen issues, try NucleaRom
Sent from my Zuk Z1 using XDA Labs