Related
Hey does anyone know how to do this? I can't find any stock system or recovery images. I'm trying to make my device fully stock again (re-enabling encryption) so I can file a warranty claim. Would booting into fastboot and restoring using the LG Mobile Support Tool (http://www.lg.com/us/support/software-firmware-drivers) be all I need to restore back? Thanks!
darkghost568 said:
Hey does anyone know how to do this? I can't find any stock system or recovery images. I'm trying to make my device fully stock again (re-enabling encryption) so I can file a warranty claim. Would booting into fastboot and restoring using the LG Mobile Support Tool (http://www.lg.com/us/support/software-firmware-drivers) be all I need to restore back? Thanks!
Click to expand...
Click to collapse
The only way known so far to return to stock is to flash these IMG files in TWRP. As for re-enabling encryption that's something I have no idea of but these images system and boot should bring you back to stock. https://build.nethunter.com/misc/us996/v10d/?C=N&O=D by jcadduono
OneDon said:
The only way known so far to return to stock is to flash these IMG files in TWRP. As for re-enabling encryption that's something I have no idea of but these images system and boot should bring you back to stock. https://build.nethunter.com/misc/us996/v10d/?C=N&O=D by jcadduono
Click to expand...
Click to collapse
Thanks!
deleted
Did this work? I have a V20 US996 (unlocked, not US Cellular) that I'd like to return to stock, after something has corrupted somewhere, making it hard for me to flash kernels, su binaries, and the like. Isn't LGUP preferred at this point? Would flashing from TWRP bring it back to stock? I'd think that the custom recovery would still be intact when you're done. I can't seem to get LGUP to even start on my PC, let alone get it to recognize my phone.
DrPhant0m said:
Did this work? I have a V20 US996 (unlocked, not US Cellular) that I'd like to return to stock, after something has corrupted somewhere, making it hard for me to flash kernels, su binaries, and the like. Isn't LGUP preferred at this point? Would flashing from TWRP bring it back to stock? I'd think that the custom recovery would still be intact when you're done. I can't seem to get LGUP to even start on my PC, let alone get it to recognize my phone.
Click to expand...
Click to collapse
Going back to complete stock I would suggest using LG's tools. After flashing back to stock you can re-lock the bootloader which should clear the boot-up warning.
If you want to try and just recover from bad flashing, and you have access to TWRP, you can try to flash the zip from here: https://forum.xda-developers.com/v20/how-to/us996unlocked-twrp-flashable-10f-t3544573
That should bring you back to 100% stock, minus recovery, and then automatically install SuperSU. I'll most likely be adding a zip without the automatic installation of SuperSU so that users can have a choice on what SU they want to use.
McNutnut said:
Going back to complete stock I would suggest using LG's tools. After flashing back to stock you can re-lock the bootloader which should clear the boot-up warning.
If you want to try and just recover from bad flashing, and you have access to TWRP, you can try to flash the zip from here: https://forum.xda-developers.com/v20/how-to/us996unlocked-twrp-flashable-10f-t3544573
That should bring you back to 100% stock, minus recovery, and then automatically install SuperSU. I'll most likely be adding a zip without the automatic installation of SuperSU so that users can have a choice on what SU they want to use.
Click to expand...
Click to collapse
I'm actually trying to get MagiskSU working, so that I can be SafetyNet compliant for snapchat, androidpay, and concur (business expense app). I'd prefer to stay on the WETA rom for the extra tweaks. Lots of users post pics of MagiskSU working in WETA, but it seems they're all on other carriers with carrier-specific models. I'd think that the US996 would be EASIER to work with. Any suggestion? Thanks for the reply!
DrPhant0m said:
I'm actually trying to get MagiskSU working, so that I can be SafetyNet compliant for snapchat, androidpay, and concur (business expense app). I'd prefer to stay on the WETA rom for the extra tweaks. Lots of users post pics of MagiskSU working in WETA, but it seems they're all on other carriers with carrier-specific models. I'd think that the US996 would be EASIER to work with. Any suggestion? Thanks for the reply!
Click to expand...
Click to collapse
MagiskSU is actually the reason I want to upload the zip(s) without the automatic SuperSU. (Allow users to pick between SuperSU & MagiskSU). I started using Magisk so that I can bypass SafetyNet. Unfortunately I've only used the stock ROM so I don't have many tips for getting MagiskSU working on WETA. I assume it's pre-rooted with SuperSU so I would say performing a full un-root within the SuperSU app and then flashing the Magisk zip in recovery could get you up and running with Magisk. It's also worth nothing that I've only been successful with v11.6 of Magisk on the stock ROM. v12.0 causes an unstable system.
McNutnut said:
MagiskSU is actually the reason I want to upload the zip(s) without the automatic SuperSU. (Allow users to pick between SuperSU & MagiskSU). I started using Magisk so that I can bypass SafetyNet. Unfortunately I've only used the stock ROM so I don't have many tips for getting MagiskSU working on WETA. I assume it's pre-rooted with SuperSU so I would say performing a full un-root within the SuperSU app and then flashing the Magisk zip in recovery could get you up and running with Magisk. It's also worth nothing that I've only been successful with v11.6 of Magisk on the stock ROM. v12.0 causes an unstable system.
Click to expand...
Click to collapse
There is a v13 of Magisk that's out if you go to their git.
WETA has an AROMA installer, and you can choose to NOT install superSU. However, when I do that, the phone won't boot. It just sits there for 20min+ (flashing the rom with supersu takes about 5min to boot). The same non-booting issue used to happen when trying to update the binary, but I flashed something that fixed that. (I flashed so much stuff and something worked... I wish I knew which it was). However, SuperSU is like burned into my ramdisk or something, and it can't come out. When I tried to do the full unroot in SuperSU, it either fails, or the phone won't boot. But, there are options along that way that I don't know what to pick. Can you suggest what to do? Here... let me elaborate:
SuperSu v2.82 > "Full Unroot" > Continue (warning that some kernels auto-root. I'm on konverged... not sure if that's good or bad for this)
Attempt to Restore boot image? > YES
Attempt to restore stock recovery image? YES or NO?
.......YES "Uninstallation failed."
.......NO "Uninstallation failed."
Attempt to Restore boot image? > NO
Phone reboots within seconds... then sits and sits until I pull the battery.
....I then have to dirty-flash my ROM with superSU to get it to boot to the OS.
Helpful others with more knowledge than I have suggested that my problems are due to the latest version of TWRP corrupting ramdisk because of bad compression. Most of this is over my head when it comes to the actual development of recoveries, kernels, etc.
DrPhant0m said:
There is a v13 of Magisk that's out if you go to their git.
WETA has an AROMA installer, and you can choose to NOT install superSU. However, when I do that, the phone won't boot. It just sits there for 20min+ (flashing the rom with supersu takes about 5min to boot). The same non-booting issue used to happen when trying to update the binary, but I flashed something that fixed that. (I flashed so much stuff and something worked... I wish I knew which it was). However, SuperSU is like burned into my ramdisk or something, and it can't come out. When I tried to do the full unroot in SuperSU, it either fails, or the phone won't boot. But, there are options along that way that I don't know what to pick. Can you suggest what to do? Here... let me elaborate:
SuperSu v2.82 > "Full Unroot" > Continue (warning that some kernels auto-root. I'm on konverged... not sure if that's good or bad for this)
Attempt to Restore boot image? > YES
Attempt to restore stock recovery image? YES or NO?
.......YES "Uninstallation failed."
.......NO "Uninstallation failed."
Attempt to Restore boot image? > NO
Phone reboots within seconds... then sits and sits until I pull the battery.
....I then have to dirty-flash my ROM with superSU to get it to boot to the OS.
Helpful others with more knowledge than I have suggested that my problems are due to the latest version of TWRP corrupting ramdisk because of bad compression. Most of this is over my head when it comes to the actual development of recoveries, kernels, etc.
Click to expand...
Click to collapse
I doubt I'll try v13 unless there's a real reason for it (haven't looked at the changes yet). Since I'm stable on v11.6 I'm not too inclined to attempt to upgrade again (since v12 kept crashing the SystemUI).
Have you tried choosing not to install SuperSU in WETA and then flashing the Magisk zip right after completing the WETA install (before attempting to boot system)?
Another idea is to flash a stock boot image (since the one in WETA is modified slightly), flash WETA with kernel and SuperSU options turned off, and then flash Magisk.
McNutnut said:
I doubt I'll try v13 unless there's a real reason for it (haven't looked at the changes yet). Since I'm stable on v11.6 I'm not too inclined to attempt to upgrade again (since v12 kept crashing the SystemUI).
Have you tried choosing not to install SuperSU in WETA and then flashing the Magisk zip right after completing the WETA install (before attempting to boot system)?
Another idea is to flash a stock boot image (since the one in WETA is modified slightly), flash WETA with kernel and SuperSU options turned off, and then flash Magisk.
Click to expand...
Click to collapse
no luck. Unless I have the wrong boot.img (I was given one earlier in trying to troubleshoot).
I flashed a boot.img that was supposedly for my phone, then flashed WETA with no kernel, no SU. Then I flashed Magisk. It flashed... but the phone wouldn't boot.
I restored the boot partition from my initial TWRP backup and tried flashing WETA again... followed by Magisk. This time, Magisk failed to run because it said SuperSU was already patched (I made the TWRP backup after installing SuperSU) and it couldn't flash.
I tried flashing WETA with the kernel, but no SU... and then immediately following it with flashing Magisk, and it wouldn't boot.
I should probably start a new thread, or post in the WETA thread. I got a little off-topic here. I initially just wanted to see if there was any advice on returning to stock on my US996.
Thanks for the suggestions
DrPhant0m said:
no luck. Unless I have the wrong boot.img (I was given one earlier in trying to troubleshoot).
I flashed a boot.img that was supposedly for my phone, then flashed WETA with no kernel, no SU. Then I flashed Magisk. It flashed... but the phone wouldn't boot.
I restored the boot partition from my initial TWRP backup and tried flashing WETA again... followed by Magisk. This time, Magisk failed to run because it said SuperSU was already patched (I made the TWRP backup after installing SuperSU) and it couldn't flash.
I tried flashing WETA with the kernel, but no SU... and then immediately following it with flashing Magisk, and it wouldn't boot.
I should probably start a new thread, or post in the WETA thread. I got a little off-topic here. I initially just wanted to see if there was any advice on returning to stock on my US996.
Thanks for the suggestions
Click to expand...
Click to collapse
You're welcome! Sorry it didn't work. I do know it takes a few minutes for it to boot up the first time, but I imagine you waited pretty long. I have heard of phones taking 10-15 minutes to boot up after flashing.
I did add US99610h stock firmware to my thread at https://forum.xda-developers.com/v20/how-to/us996unlocked-twrp-flashable-10f-t3544573 if you want to return to the newest stock firmware of the US996.
I hope you are able to get Magisk installed as it's nice to get past SafetyNet. Good luck!
Heya guys, I've been rocking my OnePlus 2 for a while. I was wanting to install a newer ROM on it but I seem to run into some problems and I just can't figure it out.
I tried to install several roms (which are all based on 7.1 android) and I seem to be getting the same error on all of them: E:Error executing updater binary in zip '/sdcard/crDroidAndroid-7.1-20161128-oneplus2.zip' This was when I tried the crDroid mod, of course. The only ones that seem to work are CM13 and OxygenOS 2.2.
Couldn't really find a good solution for this when I google'd. I tried carefully wiping what I had to but that didn't seem to help.
I also tried updating my recovery, but when I try to update my recovery it just freezes when I boot. I tried this using fastboot and or via TWRP. I'm currently using version 2.8.7.0 of TWRP because the lastest version of TWRP bricks my recovery. I've also tried the blue spark TWRP and TWRP-hybrid, they don't seem to work either, my phone just stays on the 1+ logo. I have to flash the old version of TWRP back onto it using fastboot to get a working recovery.
Anyone have a solution for me?
EDIT: I have a Chinese OnePlus2, the A2001.
EDIT2: Forgot to mention something that might be critical to the problem: I did update from OxygenOS 2.2.1 to the latest as of now, 3.1. This removed my TWRP recovery and I couldn't get the new one to work, which made me install 2.2.1 again. I've seen people mention some problems with 3.1 so this might be the cause of it?
I can't seem to find any rooting method for C432B380 software. Is there any step-by-step guide for this version? I'm currently on fully stock firmware, and I haven't unlocked my bootloader yet.
SteadyDisorder said:
I can't seem to find any rooting method for C432B380 software. Is there any step-by-step guide for this version? I'm currently on fully stock firmware, and I haven't unlocked my bootloader yet.
Click to expand...
Click to collapse
Well, ask for unlock code - that's the first step.
I am interested in this as well, as from what I see some people seem to run into problems. Say one is on Nougat C432B380 (I'm B381) and has now got the unlock code. What then? First of all, unlocking the bootloader will result in a reset, clean C432B380 installation, right? Or will there be any need to flash something else?
EDIT: I passed the unlock part following the Guide, and ended up with a clean Nougat installation as I thought. Now what? In the OldDroid TWRP thread I see many people having trouble...
Makishima said:
I am interested in this as well, as from what I see some people seem to run into problems. Say one is on Nougat C432B380 (I'm B381) and has now got the unlock code. What then? First of all, unlocking the bootloader will result in a reset, clean C432B380 installation, right? Or will there be any need to flash something else?
EDIT: I passed the unlock part following the Guide, and ended up with a clean Nougat installation as I thought. Now what? In the OldDroid TWRP thread I see many people having trouble...
Click to expand...
Click to collapse
I recommend staying away from any custom roms for now as all seem to have problems... you say you have an unlocked bootloader, then next step would be flashing a custom recovery, then from there... flashing supersu... try not to do much more than that and accept a fully functioning rooted phone better than getting a squichy camera or whatever from custom roms.... wait till they get stable
Moemen Shahawy said:
I recommend staying away from any custom roms for now as all seem to have problems... you say you have an unlocked bootloader, then next step would be flashing a custom recovery, then from there... flashing supersu... try not to do much more than that and accept a fully functioning rooted phone better than getting a squichy camera or whatever from custom roms.... wait till they get stable
Click to expand...
Click to collapse
I was not planning to install a custom ROM, I just want root, mainly for Viper4Android and some other things, but after reading the whole OldDroid TWRP thread I saw some people reporting problems with bootloops and whatnot, mainly after flashing SuperSU. Is flashing TWRP and then EliteKernel and rooting with phh or Magisk preferable? I just got my device back from the Huawei services, with a new board and everything and I don't want to ruin the stock installation again, so I am trying to be a bit more certain before I do anything.
Thank you for replying.
EDIT: Okay, so what I did was flash the latest OldDroid TWRP through fastboot and then I booted into recovery and flashed the latest Magisk (v13.3 I think). Now I have root and everything seems to work. So happy.
EDIT2: It seems that although it says I have root, I can't actually do anything with it, e.g. I can't uninstall system apps with Link2SD even though it says it was successful - reboot, still there - and the modules won't appear even after installing.... So, I don't know what's wrong.
Makishima said:
I was not planning to install a custom ROM, I just want root, mainly for Viper4Android and some other things, but after reading the whole OldDroid TWRP thread I saw some people reporting problems with bootloops and whatnot, mainly after flashing SuperSU. Is flashing TWRP and then EliteKernel and rooting with phh or Magisk preferable? I just got my device back from the Huawei services, with a new board and everything and I don't want to ruin the stock installation again, so I am trying to be a bit more certain before I do anything.
Thank you for replying.
EDIT: Okay, so what I did was flash the latest OldDroid TWRP through fastboot and then I booted into recovery and flashed the latest Magisk (v13.3 I think). Now I have root and everything seems to work. So happy.
EDIT2: It seems that although it says I have root, I can't actually do anything with it, e.g. I can't uninstall system apps with Link2SD even though it says it was successful - reboot, still there - and the modules won't appear even after installing.... So, I don't know what's wrong.
Click to expand...
Click to collapse
stay away from magisk if you want something stable... at least my opinion. Magisk is fine, the only add it adds, is magisk hide, which seems to keep failing now for most people. I'm suffering through it now and switching to supersu... try finding the correct way to remove magisk root and go the chainfire's supersu
Moemen Shahawy said:
stay away from magisk if you want something stable... at least my opinion. Magisk is fine, the only add it adds, is magisk hide, which seems to keep failing now for most people. I'm suffering through it now and switching to supersu... try finding the correct way to remove magisk root and go the chainfire's supersu
Click to expand...
Click to collapse
I restored a backup of the boot partition I had made when I first flashed TWRP which seems to have deleted Magisk, the app told me it was not installed (even though I see now a Magisk folder in data...) and then flashed Super SU, but I still can't delete system apps and having trouble with Viper*. But maybe it's not SU's fault. I don't know. I flashed v2.79, I previously had trouble with the newest versions.
Also, I had not activated the Hide function, I think.
*It is driving me crazy! Why does it not work? Supposedly I am root, I even deleted the system apps with the file managers but when I exited and reentered the folder they were there again. What is going on?... Wait... Is this normal, is it because it is system-less root?
To root any nougat fw:
1)unlock bootloader. You have to get unlock code from huawey and then in fastboot mode do: "fastboot oem unlock yourcode"
2)flash twrp recovery, i suggest you the hassan's recovery https://www.androidfilehost.com/?fid=745425885120756473
3)in fastboot mode do "fastboot flash recovery nameoftherecovery.img
4)reboot in recovery and flash this supersu
It is the 2.82 for emui 5 without loop mount,is perfect for p9lite https://www.androidfilehost.com/?fid=817550096634776377
Hello. a little while ago I restored my Huawei p9 lite nougat L31C440B380 rom from a bootloop thanks to tw1st3d83's P9 Lite Toolkit but since then i haven't been able root it again properly using magisk and other supersu apps because when i boot up music and sound don't play on my apps and videos on apps don't work at all, yet when i unroot my phone works normally, which is strange as i've rooted many times before with no problems. I'd been having some issues with magisk then due to installing and then deleting the viper4arise mod as apps didn't show in my drawer and magisk modules as well as the manager started to malfunction frequently. I looked around for anything that might help me fix this and came across HassanMirza01's P9 Lite elite kernel (All Variants CxxB3xx Phh Superuser v9 version and MagiskSU v10 version based on the b380 Rom) and decided to try it out. I used a special modded version of oldroid's twrp (TeamElite) https://www.androidfilehost.com/?fid=889764386195914200 to flash the kernels, the phh Superuser 9 version, https://www.androidfilehost.com/?fid=529152257862726224 , and the magiskSU 10 version, https://www.androidfilehost.com/?fid...0096634768996. Because they were pre-rooted, I assumed at the time i'd be able to solve my root problem.
When i was using the kernel I noticed everything ran more smoothly than usual but sound and video still weren't working. Because the kernels were pre-rooted before i installed, i think they may have modified the boot image in such a way that even when i completely format data with twrp and do an advanced wipe, then restore the factory images including the stock boot image i extracted from the B380 rom it starts up normally but gets stuck on the loading screen. At first I thought it needed time to load so I left it to charge overnight as the battery was pretty low but i when i woke up the next morning it was still on the Huawei logo. i don't think the kernel has an uninstaller or if there's one i can flash that doesn't have root. If i flash the boot image that I patched earlier with magisk, everything loads fine but i'm still faced with the same problems with no video or sound. I've been thinking of just reflashing the stock images and then relock the bootloader so i can do three button "dload" method for a clean install of my B380 rom as i've tried to use it before and failed as i get this error message before it finishes:
write radio image...
32K crc checked failure
E:unknown command [errno]
update_huawei_pkg_from_ota_zip: update from zip failed
Updater process ended with ERROR: 7
But seeing as how the kernel has altered the boot image I can only use the boot image that I patched with magisk or supersu.
I'm definitely sure that the method won't be able to work on a phone that's rooted but what i'm more worried about is that something goes wrong and i end up in a bootloop with no way to use adb to unlock the bootloader or use recovery, pretty much bricking the device. I've looked around for other kernels i might be able to flash and restore my device like Smoky Kernel and Rusty Kernel but they didn't work at all as opposed to the Elite Kernel. Can I lock the bootloader with a rooted phone and my reinstall my stock rom with the three button method or is there another way i could go about this? I'm asking this way because every time i unroot with either magisksu elite kernel or my magisk boot image the phone will always bootloop. The TWRP version I'm on, 3.1.1-0 isn't very useful at the moment compared to when I was on MM because when I had a problem I just flash and forget, but as the stock rom has two files it's a bit harder for me to get the hang of it so i would be very grateful for where to go from here.
Hey guys, i just bought the phone and flashed zips immediately But have a question as i've never encrypted my phones till now(it's forced). So i'm on stock kernel and latest 4.5.14 Nolimits rom. Now I want to install xposed, bluspark kernel and remove the encryption from my device(i read something like a dm-verity disabler). Which order and method I should chose to flash those ? I saw something about decyrpted device in the first page of the rom's aroma installer and an option for the xposed but not sure and i don't want any bootloops
Thanks!