hi to all, I bought the 6t from 5 days, I notice that the notification slider is a bit 'shaky, I state that it works properly in various positions.
trxjam said:
hi to all, I bought the 6t from 5 days, I notice that the notification slider is a bit 'shaky, I state that it works properly in various positions.
Click to expand...
Click to collapse
That's normal no need to worry :good:
Funk Wizard said:
That's normal no need to worry :good:
Click to expand...
Click to collapse
Tanks???
Related
Hi there y'all,
my xda neo / Prophet is always blinking green while he has got an telephone-connection with my provider and i hate that blinkin light, especially in my bedroom.
Has anyone got an idea how to disable this? Is there any possibility via Registry?
Thanks for any help!
a piece of black tape perhaps?
Try
HKLM\Drivers\BuiltIn\AllLEDMgr\Index
change the value to 0
__________________
I used LED Toggle which I attached. It works fine.
You do have to watch out though: disconnect your phone from power or your computer before you activate it. Using it once stops the light and using it again turns it back on.
It looks like the effect is gone after a softreset.
And another thing: some hours after using it my phone didn't respond at all for a few minutes. The only solution was a soft reset. This has happened several times now and when I keep the light on it seems to be working normal again. I don't know if it's just my Prophet but if you encounter the same problem we know where it's coming from.
Jayxz said:
I don't know if it's just my Prophet but if you encounter the same problem we know where it's coming from.
Click to expand...
Click to collapse
Thanks Jay, your little program works perfect. I'll see if i'll get the same problem and report it here
niketkumar, thanks for your help. I first try Jays Software, if i get the same problems i'll use your registry hack.
Thanks to both of you from my girlfriend, too - cause now it's less greener in our bedroom
So? Any news?
I stopped using the software and my phone hasn't crashed once. How's yours behaving?
Had the exact same problem, when using LED Toggle my device occasionally hangs. Since I stopped using it everything works just fine..
Man, that just sucks. I was so happy to be rid of that stupid light.
Now about that registry hack. I can find everything up to "\builtin" but the rest (AllLEDMgr\Index) doesn't exist. Do I have to create a new folder with an index file which has the value set to 0 or what?
Don't remember if I've tried the registry hack mentioned above, but I followed the thread about this issue in Modaco and tried numerous registry hacks before ending up with the only solution (that I'm aware of) that currently seems to work.
Which, unfortunately is the LED Toggle attached above, which in hand makes your device quite unstable..
So, back to the drawing board guys - hope someone finds a solution!
Just checked the corresponding thread on Modaco (http://www.modaco.com/index.php?showtopic=243948&st=0) and indeed this solution is not working flawlessly on our beloved Prophets..
Why not just place it face down on your dresser at night?
this has to be one of the dumbest hack request on the site!!! do as blunt man said and put it face down if it's that annoying!
gibster said:
this has to be one of the dumbest hack request on the site!!!
Click to expand...
Click to collapse
maybe you just don't understand it
gibster said:
this has to be one of the dumbest hack request on the site!!!
Click to expand...
Click to collapse
this has to be one of the dumbest comments i ever got in an professionals-board.
Jayxz, any of the workarounds i found generated problems so i just painted the light black. Not really the best solution but it sucked so badly
I find the green light annoying too, but i'd still like to have the orange warning when i received a msg or missed a call....
I hope that somebody could find a working solution for this
You can try the attached File i found at the MoDaCo Forum.
It works on my Prophet but some Users told that it drains the Battery
cu seneca
seneca said:
You can try the attached File i found at the MoDaCo Forum.
It works on my Prophet but some Users told that it drains the Battery
cu seneca
Click to expand...
Click to collapse
i tried this one but a taskmanager shows that ~10% cpu-usage is caused by this tool
enabling led blinking
Hi to All,
my HTC TYTN II always blinking green while he has got on phone-connection with my provider, and i love that. But now i have xperia and...no blinking on phone connection. It is possible to made it blinking when phone connection with provider is on
hello guys., still no way to use the wizard as flashlight? tnx in advance, -storm
Is this what you want?
http://www.vijay555.com/index.php?Releases:VJCandela
Be careful with it though. I've heard people have ruined the camera flash by over using this. Vijay555 has even modified the page to say it will damage your flash led...
Personally I just set my screen to not go off for 2 minutes, and that works as a really bright flashlight Sure, uses more power, but I"M not using it for long periods of time usually.
thanks but this isn't working for the wizard
i know vj was at working about this some months ago but i didn't receive any news about it.....so i'm guessing still no way to use our lovely wizard as torch
stormwind said:
thanks but this isn't working for the wizard
i know vj was at working about this some months ago but i didn't receive any news about it.....so i'm guessing still no way to use our lovely wizard as torch
Click to expand...
Click to collapse
I just use the screen as a flashlight.
--M
yeah but have u tried the flash? it's simply amazing and light 200 times the normal display even with just white screen!
hope they will find a solution too!!
stormwind said:
yeah but have u tried the flash? it's simply amazing and light 200 times the normal display even with just white screen!
hope they will find a solution too!!
Click to expand...
Click to collapse
It always amazes me what kind of needs people have! The WIZ makes a quite expensive flashlight. Every key chain pocket flash light has better light and is more handy to use!
...keep The World In One! (qtek)
Hello,
mine HTC HD2 T-mobile US version have problem. The touch screen stop working and from time to time start to working. I`m with Android, reboot lots of times the phone, leave him without battery for 20 hours but the problem is still there. I reinstall android, format SD card and the problem is gone for 12 hours... now the touch screen again not working. The buttons and the android works fine i can accept the incoming calls but cand do nothing with the screen.
Could u please help me what to made.
If you had done a *search* on google, or in the hd2 general section, you would find that the issue can only be solved by replacing the digitizer, either yourself, or paying a professional to do that.
That's right, replacing digitizer( or whole combo) is the only reliable solution!:good:
jianC said:
If you had done a *search* on google, or in the hd2 general section, you would find that the issue can only be solved by replacing the digitizer, either yourself, or paying a professional to do that.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1213809
read the 3rd post it works for me push hard the red button and screen now working
It's just an illusion...
bewolf said:
http://forum.xda-developers.com/showthread.php?t=1213809
read the 3rd post it works for me push hard the red button and screen now working
Click to expand...
Click to collapse
Keep dreaming, just let me know what will happen after a few days(only)!!!
bib*oops said:
Keep dreaming, just let me know what will happen after a few days(only)!!!
Click to expand...
Click to collapse
Hello, till now everything is ok and the screen works fine after few days will post again
It's a kind of magic!
bewolf said:
Hello, till now everything is ok and the screen works fine after few days will post again
Click to expand...
Click to collapse
Good luck!
bib*oops said:
Keep dreaming, just let me know what will happen after a few days(only)!!!
Click to expand...
Click to collapse
Well today the screen stop working now i need to buy new one and replace it
bewolf said:
Well today the screen stop working now i need to buy new one and replace it
Click to expand...
Click to collapse
Yet again, I wish you luck!:good:
Hi,
So i noticed my vibration had stopped working shorty after install a CM 12 Nightly rom, but i cant put my finger on the exact point when it stopped working ( i recently sent my phone off for a screen repair and am unsure as to whether it worked when i got it back). Anyway, i tried everything I could think of software wise, tinkered with settings, installed a stock rom via ODIN etc, but i couldn't seem to get it to work. So i figured it must've been a hardware problem, but after changing out the vibrator motor I'm still not getting any feedback. Anyone know what the issue could be?
Thanks in advance
jayah said:
Hi,
So i noticed my vibration had stopped working shorty after install a CM 12 Nightly rom, but i cant put my finger on the exact point when it stopped working ( i recently sent my phone off for a screen repair and am unsure as to whether it worked when i got it back). Anyway, i tried everything I could think of software wise, tinkered with settings, installed a stock rom via ODIN etc, but i couldn't seem to get it to work. So i figured it must've been a hardware problem, but after changing out the vibrator motor I'm still not getting any feedback. Anyone know what the issue could be?
Thanks in advance
Click to expand...
Click to collapse
hi mate
check step 20 , maybe the flex is just loose
https://www.ifixit.com/Teardown/Samsung+Galaxy+S4+Teardown/13947
MAX 404 said:
hi mate
check step 20 , maybe the flex is just loose
https://www.ifixit.com/Teardown/Samsung+Galaxy+S4+Teardown/13947
Click to expand...
Click to collapse
Had already tried that but ive just tried again and everything looks fine yet still no vibration
:crying:
jayah said:
Had already tried that but ive just tried again and everything looks fine yet still no vibration
:crying:
Click to expand...
Click to collapse
maybe motor is broken.....
reinstall rom , try another if still have the same trouble motor maybe defective.....
they only cost a few bucks..
Thats the thing, i already swapped the motor out and still cant get it to work so im pretty perplexed
MAX 404 said:
maybe motor is broken.....
reinstall rom , try another if still have the same trouble motor maybe defective.....
they only cost a few bucks..
Click to expand...
Click to collapse
Thats the thing, i already swapped the motor out and still cant get it to work so im pretty perplexed
jayah said:
Thats the thing, i already swapped the motor out and still cant get it to work so im pretty perplexed
Click to expand...
Click to collapse
hi
i missed that from the OP....
See if you can make work with an app like
https://play.google.com/store/apps/details?id=com.dfs&hl=en
https://play.google.com/store/apps/details?id=de.j4velin.vibrationNotifier&hl=en
to see if is hardware or software the problem
Hi everyone. I got my OP5 a few days ago and realized that the screen isn't working properly, apart from the jelly screen issue. Does anyone know if this is fixable or I need to replace the screen. I'll leave a video showing what I mean
https://youtu.be/Apu1Z_BVC9U
https://www.youtube.com/watch?v=FmjXTHz5Jac
Slay1991 said:
Hi everyone. I got my OP5 a few days ago and realized that the screen isn't working properly, apart from the jelly screen issue. Does anyone know if this is fixable or I need to replace the screen. I'll leave a video showing what I mean
Click to expand...
Click to collapse
If it's new > claim warranty!
strongst said:
If it's new > claim warranty!
Click to expand...
Click to collapse
I want to leave that as the last resource. Got it from another country, and sending it back costs a lot. Maybe knowing if the problem is the screen or the GPU can save me a couple of bucks
Have you tried to update the OS?
AnDrOiDnEoV said:
Have you tried to update the OS?
Click to expand...
Click to collapse
It has the latest version of OOS, but I'm starting to think that the problem isn't software related
EDIT: If anyone knows if this issue is solved by replacing the screen, please let me know