Database Users

Still No VoLTE for Redmi2 8gb variant

Hello, I currently am using a jio sim as my primary sim. However, i tried all the methods suggested on xda but still no volte.
List of things that i have tried:-
1. Tried flashing the modem(doesn't work at all)
2. Flashing MIUI 7.5 version as suggested( V7.5.2.0.LHJMIDE_20160629.0000.25_5.1_global ) to be precise
3. Tried flashing another one of Redmi2 Prime's firmware(global developer rom)
4. And tried flashing several other ROMs(Orion OS, RR, Tesla, AOSP and DU) after doing step2 and still no volte support found
Can anybody help me?

@cypherx1998 Flash kitkat dev rom 7.1.5 or newer from fastboot, after it starts booting turn of your device and boot into fastboot, then flash the latest lollipop dev rom and boot into it, setup your device, then go to settings, mobile data (I think, it's where you have the option to change to 3g and 4g data) and enable VoLTE voice calls, after that, reboot into fastboot and flash TWRP 3.0.2-0, then go to wipe, advanced wipe, select:
cache/dalvik-cache
system
data
internal storage
and then wipe, after that go to wipe again, select cache, then "change partition format" select F2FS, and swipe to apply, do the same thing for data, don't do on dalvik-cache and system, or else this may brick your device.
Then flash the wt88047 firmware avaliable on LineageOS second or third post, do a full wipe again, install VoLTE universal Patch Here do a full wipe again, then flash the latest LineageOS build, after wipe only cache and data, flash OpenGapps pico arm android 7.1.1 and reboot.
You will have VoLTE

Try to flash RR 5.8.0 nought ROM. U will have voLTe working on ur device. I am currently using that ROM. Go for it

Shashank Varma said:
Try to flash RR 5.8.0 nought ROM. U will have voLTe working on ur device. I am currently using that ROM. Go for it
Click to expand...
Click to collapse
No... I didn't get VoLTE...
I am using the same ROM.
---------- Post added at 09:27 AM ---------- Previous post was at 09:24 AM ----------
If u want VoLTE u will have to flash the redmi 2 prime rom either fastboot or recovery...
However ur device will start lagging and ur free ram won't go higher than 300 MB.
http://bigota.d.miui.com/6.7.5/wt88....5_20160523.0000.23_5.1_global_53ff97d6ba.tgz
And the recovery one is::
http://bigota.d.miui.com/6.7.5/miui_HM2XWCProGlobal_6.7.5_8673db6ce3_5.1.zip

voLte is working for sim1. See the screenshot below

Volte works just flash latest wxcpro ROM by editing its script so that it won't say 'this ROM is for so and so ****'

Shashank Varma said:
voLte is working for sim1. See the screenshot below
Click to expand...
Click to collapse
How can that screenshot say that VoLTE is working??? I can't see any HD or VoLTE sign..

U can see there enhanced 4g LTE mode which means volte.

Shashank Varma said:
U can see there enhanced 4g LTE mode which means volte.
Click to expand...
Click to collapse
Nope bro!!! I don't think that's VoLTE! Coz I have got that enabled and I can't call using a Jio SIM!!

Didnt work
TecnoTailsPlays said:
@cypherx1998 Flash kitkat dev rom 7.1.5 or newer from fastboot, after it starts booting turn of your device and boot into fastboot, then flash the latest lollipop dev rom and boot into it, setup your device, then go to settings, mobile data (I think, it's where you have the option to change to 3g and 4g data) and enable VoLTE voice calls, after that, reboot into fastboot and flash TWRP 3.0.2-0, then go to wipe, advanced wipe, select:
cache/dalvik-cache
system
data
internal storage
and then wipe, after that go to wipe again, select cache, then "change partition format" select F2FS, and swipe to apply, do the same thing for data, don't do on dalvik-cache and system, or else this may brick your device.
Then flash the wt88047 firmware avaliable on LineageOS second or third post, do a full wipe again, install VoLTE universal Patch Here do a full wipe again, then flash the latest LineageOS build, after wipe only cache and data, flash OpenGapps pico arm android 7.1.1 and reboot.
You will have VoLTE
Click to expand...
Click to collapse
Took me time to try this...but didnt work.....you might think that i didnt follow the steps properly..but i did and i verified on each step that i was doing it the right way....but sadly it didnt work

You may try Redmi 2 Prime ROM (stable or dev) for some days..Check whether you get VoLTE on that ROM or not.. If yes then use that for some days maybe 2 or 3 days..It will be slow at first then after 2 to 3 hours of use u will feel no lag..I was using Developer version for 2-3 months which was fine for daily driver..I just faced storage issue..Then I tried stable version, and the same issue was there.. So I decided to use some custom ROMs and I Flashed AOSP Extended (Nougat)..VoLTE works fine and the ROM is so much smooth with good battery backup..But due to slow internet speed I am using Mokee 7.1 right now.. You can try using R2P ROM for some days...If VoLTE works there then it will work on other ROMs too( as per my experience).
Ignore my english...

Ofnigamer said:
You may try Redmi 2 Prime ROM (stable or dev) for some days..Check whether you get VoLTE on that ROM or not.. If yes then use that for some days maybe 2 or 3 days..It will be slow at first then after 2 to 3 hours of use u will feel no lag..I was using Developer version for 2-3 months which was fine for daily driver..I just faced storage issue..Then I tried stable version, and the same issue was there.. So I decided to use some custom ROMs and I Flashed AOSP Extended (Nougat)..VoLTE works fine and the ROM is so much smooth with good battery backup..But due to slow internet speed I am using Mokee 7.1 right now.. You can try using R2P ROM for some days...If VoLTE works there then it will work on other ROMs too( as per my experience).
Ignore my english...
Click to expand...
Click to collapse
Yes just flash either the dev or stable Redmi 2 Prime ROM. I can say that this works because I have flashed it on as many as three devices. Just go to this link and find out Redmi 2 Prime Global Developer ROM or Global Stable ROM.
http://en.miui.com/a-234.html
Remember these are to be flashed in fastboot. After flashing this, you can flash any Nougat based ROM like LOS, RR, AEX, cRDroid, etc to enjoy VoLTE on those ROMs too.

cypherx1998 said:
Hello, I currently am using a jio sim as my primary sim. However, i tried all the methods suggested on xda but still no volte.
List of things that i have tried:-
1. Tried flashing the modem(doesn't work at all)
2. Flashing MIUI 7.5 version as suggested( V7.5.2.0.LHJMIDE_20160629.0000.25_5.1_global ) to be precise
3. Tried flashing another one of Redmi2 Prime's firmware(global developer rom)
4. And tried flashing several other ROMs(Orion OS, RR, Tesla, AOSP and DU) after doing step2 and still no volte support found
Can anybody help me?
Click to expand...
Click to collapse
1)download Mi flash tool
http://en.miui.com/forum.php?mod=attachment&aid=NzYzMjQzfGFlZDEyMDMzfDE0NzI1NDg5MDJ8ODE5MTF8MzM2MTg0
2)
download fastboot rom redmi 2 prime global stable or china
http://bigota.d.miui.com/V8.1.3.0.L...DI_20161230.0000.00_5.1_global_23ac47dab8.tgz
above is global stable link.
3) put your phone in fastboot mode, unzip the downloaded rom. (avoid spaces in between folder path/name eg "C:\New Folder\Extracted rom\...." is not allowed instead it should be like C:\New_Folder\Extracted_rom\.......)
4) open mi flashing tool see if your device is listed. refresh to see. select clean all (flash_all.bat) option from bottom of mi flashing tool.
5) click on flash, and let it boot.
you would be able to use VoLTE now in miui rom. if you want to change to any N based roms just flash twrp and clean install any rom.

Flashing the MIUI 7.5.2 global ROM should work. Wipe everything and do a clean install. Once you see an indication of VOLTE on the MIUI then you should be able to get the same in other ROMS. I just did it recently.

Flash the redmi 2 prime rom using any of the methods fast boot or normal. If VoLte is what u r looking for

cypherx1998 said:
Hello, I currently am using a jio sim as my primary sim. However, i tried all the methods suggested on xda but still no volte.
List of things that i have tried:-
1. Tried flashing the modem(doesn't work at all)
2. Flashing MIUI 7.5 version as suggested( V7.5.2.0.LHJMIDE_20160629.0000.25_5.1_global ) to be precise
3. Tried flashing another one of Redmi2 Prime's firmware(global developer rom)
4. And tried flashing several other ROMs(Orion OS, RR, Tesla, AOSP and DU) after doing step2 and still no volte support found
Can anybody help me?
Click to expand...
Click to collapse
I think i can help you dude. Flash this fastboot rom you have. Boot it with YOUR Jio sim in the first sim slot inside. Setup everything normally in the phone. After it booted, you WILL see the Volte symbol in the statusbar.
Now root it and install TWRP. Now install a Volte rom of your choice. It has to work.
I will say you why this has to work. I own this device. The 8GB variant. My friend owns the same device. While my device had Volte working, his' didn't work. I checked it. He had kitkat bootloader. Then i flashed the lollipop stock rom in his device in fastboot mode. i directly rooted the device and installed cm14.1 in his device. Still no Volte. I wondered what the fcuk was just happening. My friend was like i'll cope up with this dude. I'll use jio 4g voice. But couldn't leave it like that. I tried it the second time just like i have told you and then VOLTE STARTED ****ING WORKING MAN !!! I was on cloudnine !!! Just helping you out !!
I think the reason Volte was not working is because the jio sim needed the stock rom to trigger it to start Volte sevices. Before it, the jio must have thought "yeah, this is a non volte device ". Just saying !!
Have a nice day !!!

Sankar Bharani said:
I think i can help you dude. Flash this fastboot rom you have. Boot it with YOUR Jio sim in the first sim slot inside. Setup everything normally in the phone. After it booted, you WILL see the Volte symbol in the statusbar.
Now root it and install TWRP. Now install a Volte rom of your choice. It has to work.
I will say you why this has to work. I own this device. The 8GB variant. My friend owns the same device. While my device had Volte working, his' didn't work. I checked it. He had kitkat bootloader. Then i flashed the lollipop stock rom in his device in fastboot mode. i directly rooted the device and installed cm14.1 in his device. Still no Volte. I wondered what the fcuk was just happening. My friend was like i'll cope up with this dude. I'll use jio 4g voice. But couldn't leave it like that. I tried it the second time just like i have told you and then VOLTE STARTED ****ING WORKING MAN !!! I was on cloudnine !!! Just helping you out !!
I think the reason Volte was not working is because the jio sim needed the stock rom to trigger it to start Volte sevices. Before it, the jio must have thought "yeah, this is a non volte device ". Just saying !!
Have a nice day !!!
Click to expand...
Click to collapse
How do you check what bootloader you're on currently?

cypherx1998 said:
How do you check what bootloader you're on currently?
Click to expand...
Click to collapse
I think their is no(simple) way to know that.But you can try a app named "phone info". But it didn't work out for me.It is showing unknown bootloader.
The best way to know your bootloader version is " try to remember which miui ROM u flashed last".
Or there is lolypop firmware in lineage is thread for u.

cypherx1998 said:
How do you check what bootloader you're on currently?
Click to expand...
Click to collapse
Simple. Press vol down and power. will boot into fastboot mode.
If the letters saying FASTBOOT are in green color and small, it is in KitKat bootloader. If the letters saying FASTBOOT are in Blue color and little big, it is Lollipop. I know it sounds a little lame, but trust me, this is a reliable method. If you flashed the lollipop rom via the mi Flash application through system, and youve got the blue colored bootloader, then you are on lollipop bootloader

SankarWayne said:
Simple. Press vol down and power. will boot into fastboot mode.
If the letters saying FASTBOOT are in green color and small, it is in KitKat bootloader. If the letters saying FASTBOOT are in Blue color and little big, it is Lollipop. I know it sounds a little lame, but trust me, this is a reliable method. If you flashed the lollipop rom via the mi Flash application through system, and youve got the blue colored bootloader, then you are on lollipop bootloader
Click to expand...
Click to collapse
well atleast now i know i'm on lollipop bootloader.....but still no volte man

Fingerprint with Lineage OS and Ressurection Remix nougat

Hi everyone,
I have a little problem with fingerprint with these 2 roms.
Normally I could add 5 fingers but I can only 3 max. If I try to configure the last 2, all my fingerprints dont work at all.
Moreover I can't delete fingeprints. When I try, they come back.
That is an issue which not occur with 6.0 custom roms.
Someone know how to fx it?
Thanks.

I'd suggest flashing the stock nougat 93-11 or 93-14 firmware (e.g. from the guides section) to resolve your fingerprint issues. Once that's done, future installs of lineage and RR should have fingerprint support for more than 3 fingers.

Thanks for replying.
I have xt1642. Is there a stock firmware Nougat for this device? I didnt find it

Nicozyp said:
Thanks for replying.
I have xt1642. Is there a stock firmware Nougat for this device? I didnt find it
Click to expand...
Click to collapse
I've got an XT1642 (UK - retGB, EMEA baseband) and updated to Nougat 93-11 using the stock files on here okay (now running Lineage with 4 FPs set).
The ROM I used to upgrade was the one linked here: https://forum.xda-developers.com/moto-g4-plus/how-to/guide-install-official-december-nougat-t3518262 This will bring you up to the official 93-11 update via installing from stock recovery - you need Marshmallow build 139-63/64 however.
However, you may like to try either of these guides as well: https://forum.xda-developers.com/moto-g4-plus/how-to/moto-g4-plus-xt1640-43-athene-npj25-93-t3549369
https://forum.xda-developers.com/moto-g4-plus/how-to/android-7-0-install-nougat-official-t3531612
As long as you can successfully install a Nougat stock ROM onto your device, the updates should mean your fingerprint sensor works properly in the custom ROMs. Bear in mind that updating to Nougat may wipe your data and cause you to lose TWRP/root until you re-install them.

Last question: can I wipe system and internal storage before installing ressurection?

Nicozyp said:
Last question: can I wipe system and internal storage before installing ressurection?
Click to expand...
Click to collapse
Once you've installed Nougat (and I recommend installing TWRP too), if you wish to install Resurrection Remix, only wipe system, data, Dalvik and cache. Don't wipe internal storage, since that's where your ROM zip is stored!
Silesh's initial post on the RR version for Moto G4s has more information on this https://forum.xda-developers.com/moto-g4-plus/development/rom-resurrection-remix-n-5-8-0-t3507275

Unable to flash stock recovery => "image not signed or corrupt"

Nicozyp said:
Unable to flash stock recovery => "image not signed or corrupt"
Click to expand...
Click to collapse
The image is flashed. Boot into recovery and you'll realize.

Nicozyp said:
Unable to flash stock recovery => "image not signed or corrupt"
Click to expand...
Click to collapse
Which file are you flashing? Does it end in OKAY after that error?
EDIT - zeomal is too quick for me

Indeed it's ok.
For the moment I upgrade MM, then gonna flash stock Nougat.

So problem solved.
I've flashed RR and configured fingerprint ==> it works fine
Thanks for ur help and advices

fingerprint option is not displayed in my zuk z1
Hey I have installed official lineage-os on my zuk z1 handset but still I can't find fingerprint option in my zuk
What to do help me

Latest RR 5.8.2 issue

Hello X D I A N S
An update for Resurrection Remix was released few days back for athene and almost all users phone doesn't boots up due to a bootloader error....
Basically it got screwed up because of Magisk inside perhaps...
Requesting users to provide there solutions in this space!
Thanks

Remove magisk from the zip. :maybe:

Yes, Remove the Magisk folder from the rom zip & then flash the zip. If you want root then flash SuperSUv2.79sr3. It's stated in the OP as well in BIG BOLD RED LETTERS here

Apps FC
Hello. With the RR ROM starting from the 9/3/17 version, many programs will ask for permission on every restart. And many of them will FC then. Even for the older and first RR version I tried (3/3/17) this happens with file explorer apps. Even doing a full wipe doesn't help.
After the ROM, I'm always flashing the Pico GApps and the EX Kernel (now 1.04).

You should have read the op before doing anything unnecessary. Anyways there are two fixes for this
Fix number 1 -
1. Download the file
2. Open the zip file and delete the magisk folder(I recommend doing it via computer)
3. Flash the new zip.
Fix number 2 -
1. Flash elementalx kernal 1.04 version (the one for the lineage is 7.1.x)
2. Flash the new ROM
Enjoy. Hit thanks if it helped.

Does anyone have the problem while calling that the volume does not lower down...??

Ayan Uchiha Choudhury said:
You should have read the op before doing anything unnecessary. Anyways there are two fixes for this
Fix number 1 -
1. Download the file
2. Open the zip file and delete the magisk folder(I recommend doing it via computer)
3. Flash the new zip.
Fix number 2 -
1. Flash elementalx kernal 1.04 version (the one for the lineage is 7.1.x)
2. Flash the new ROM
Enjoy. Hit thanks if it helped.
Click to expand...
Click to collapse
Thanks for the suggestion. But this doesn't solve the problem. The latest version from yesterday doesn't have the Magisk folder.

Is your phone booting up now?
mobileoid said:
Thanks for the suggestion. But this doesn't solve the problem. The latest version from yesterday doesn't have the Magisk folder.
Click to expand...
Click to collapse
@Sharp404
If not, then can you put your phone in fastboot/bootloader mode? And if that error still shows up on the bootloader when you choose START, you will have to flash stock Nougat to recover the device. A similar problem was faced by some guy.
@lCrD512 :good:

mobileoid said:
Hello. With the RR ROM starting from the 9/3/17 version, many programs will ask for permission on every restart. And many of them will FC then. Even for the older and first RR version I tried (3/3/17) this happens with file explorer apps. Even doing a full wipe doesn't help.
After the ROM, I'm always flashing the Pico GApps and the EX Kernel (now 1.04).
Click to expand...
Click to collapse
I've been using RR for a long time but never had any force close, I'm using the stock kernel that comes with RR(3/17). Actually never had any FC on any custom rom
Try a clean flash.
---------- Post added at 01:08 PM ---------- Previous post was at 01:06 PM ----------
tywinlannister said:
@Sharp404
If not, then can you put your phone in fastboot/bootloader mode? And if that error still shows up on the bootloader when you choose START, you will have to flash stock Nougat to recover the device. A similar problem was faced by some guy.
@lCrD512 :good:
Click to expand...
Click to collapse
¯\_(ツ)_/¯ ?

Thank you guys. I've found out what caused the FCs. I installed a zip file for granting the moto camera permissions to save on the SD card. I've used this fix: forum.xda-developers.com/android/software/fix-extsd-fix-v1-0b-2016-01-18-t3296266 ,which was working, but isn't made for Nougat. I guess that it made too many changes and screwed up the OS.
Somehow then I couldn't find the com.motorola.cameraone package in the data/system/packages.xml file. But after the last reflesh of the OS and of the stock N moto cam, I found the permission section for the moto camera app, and added: <item name="android.permission.WRITE_MEDIA_STORAGE" granted="true" flags="0" />
Now, only the browser crashes and the old Google camera app ( https://play.google.com/store/apps/details?id=com.google.android.GoogleCamera ) on video recording, but that's ok.

Microphone problem
Hello. I have a problem with my moto G4 Plus on the latest RR ROM (with 1.04 LOS): the microphone gain resets after a reboot to -9db, despite checking for example to set 3dB at the startup.
Does anyone has an idea how to solve this, besides setting the gain after every reboot manually in the Kernel manager?

mobileoid said:
Thanks for the suggestion. But this doesn't solve the problem. The latest version from yesterday doesn't have the Magisk folder.
Click to expand...
Click to collapse
try flashing boot.img and see if it works or not

Thanks for the suggestion. I have already solved the problem of the crashing apps.
But now I have the problem that with the EX Kernel 1.04 LOS, my microphone gain is reset to -9dB after restarting the phone (See my previous post). Does anyone have an idea how this can be solved?

Does anyone having fast charging issue after installing latest build because i am suffering from fast charging issue.

Custom Rom For Samsung J2 (J200H) S7 Experience Custom Build

Hey There ...........
Introducing My New Rom : S7 Experience Custom Build
Built V1
Based On Stock 5.1.1 Lollipop Rom
Warnings :
1. You are now Void your Warrenty …….
2. Backup all your personal apps and important data to avoid loosing them …
3. Do all steps perfectly And carefully ……
4. I am not responsible for any mistake and Brick your phone ….[/SIZE]
Features :
1. Only For J2 2015 3G Variants
2. Android 5.1.1 Lollipop
3. Based on latest J200HDDU0APE1/APJ3 firmware
4. Deodexed
5. Medium Deboalted
6. Zipaligned
7. Signed
8. PreRooted
9. Added Busybox,SU.d and Init.d Support
10. S7 Style Statusbar
11. S7 Music Player
12. S7 Themed Apps
13. Xposed Enabled Zip Added
14. All Apps Are Updated
15. Fx Root Explorer
16. Sony Movies Added
17. S7 Wallpaper
18. S7 Icons
19. S7 Sound And Bootanimation
20. And More ...
How To Install :
1. Download Zip file Of the Rom From Link Given Below
2. You Mast Have TWRP Recovery on your device.(Letest TWRP is Given In attachments)
4. Copy the S7 Experience Custom Build.zip toYour SD card
5. Turn off Your Phone And press home button+power+Volume up button at a same time
6. Aftar apearing TWRP recovery go to install and install S7 Experience Custom Build.zip file from sd card you downloaded before
7. Now reboot system and wait for approximately 5 minutes.
9. Now you are good to use this rom ......
[For Xposed Install xposed-v78.0-sdk22-arm-custom-build-by-wanam-20151116.zip after installing rom given in the attachments]
Downloads :
https://drive.google.com/open?id=0B0rTXdhaTd2MV2szTEYtQWVIeVU
Credits :
@ASSAYYED –for his best ever kitchen.
@ashyx - for his Twrp
@me - For building Rom
Contact Me :
On Facebook Only Send Massages
www.facebook.com/almamun512

Thanks
Nice rom the rom like realy galaxy s7 I very like this

Great work . I will soon test it By the way is there theme support and if not are you planning to do it????

ad. said:
Great work . I will soon test it By the way is there theme support and if not are you planning to do it????
Click to expand...
Click to collapse
Actually Theme Option Is Enabled But Its Not Change Everything, I Dont Know Why, But thing Is Our Framework Doesn't Suppot That.

almamun512 said:
Actually Theme Option Is Enabled But Its Not Change Everything, I Dont Know Why, But thing Is Our Framework Doesn't Suppot That.
Click to expand...
Click to collapse
ok but my phone stick in bootlogo when i tried to install xposed it said unable to mount system ?????? what to do

ad. said:
ok but my phone stick in bootlogo when i tried to install xposed it said unable to mount system ?????? what to do
Click to expand...
Click to collapse
Did You clean Insall It ?
Do Wipe/Advance Wipe/system,data,delvik,catch
Then Install
Make Sure Your Device Is J200H 3g

almamun512 said:
Did You clean Insall It ?
Do Wipe/Advance Wipe/system,data,delvik,catch
Then Install
Make Sure Your Device Is J200H 3g
Click to expand...
Click to collapse
I tried both clean and dirty flash but no sucess ...
I got where the problem is...
system is not being fully extracted . There lacks many folders like priv-app in system partition .
I installed another zip file and noted that every thing is working well the system got fully extracted.
Maybe the problem is in updater-script Hope you can fix it soon

Will it wrk on j200g?

ad. said:
I tried both clean and dirty flash but no sucess ...
I got where the problem is...
system is not being fully extracted . There lacks many folders like priv-app in system partition .
I installed another zip file and noted that every thing is working well the system got fully extracted.
Maybe the problem is in updater-script Hope you can fix it soon
Click to expand...
Click to collapse
Can you send me a picture of the error or something.
There Should be no problem in updater-script
Also send me your about devices screenshot

almamun512 said:
Can you send me a picture of the error or something.
There Should be no problem in updater-script
Also send me your about devices screenshot
Click to expand...
Click to collapse
http://imgur.com/GYMLjJL
here's the ss about phone and i cant send picture of error but I'm sure the problem was caused due to the problem in system
The flashing had went smoothly but when i tried to boot to system i got atuck at samsung galaxy j2 screen and on checking system via twrp file manager i gound ther lacked different things.
I don't know if its the problem of my twrp or else I'm thinking of giving one try to flashify

ad. said:
http://imgur.com/GYMLjJL
here's the ss about phone and i cant send picture of error but I'm sure the problem was caused due to the problem in system
The flashing had went smoothly but when i tried to boot to system i got atuck at samsung galaxy j2 screen and on checking system via twrp file manager i gound ther lacked different things.
I don't know if its the problem of my twrp or else I'm thinking of giving one try to flashify
Click to expand...
Click to collapse
What Rom Are U Using Stock ?
I Dont think so.
Anyway Its strongly Recommended to be on letest Stock Rom Before Flashing My Custom Rom.
Nobody Having this Problem Like You.
And Use the TWRP I gave in attachment.

Not working....
Sent from my SM-J200H using XDA Free mobile app

wow this rom is better than i expected

in twrk recovery i got msg regarding it succeeded. but after that my mobile is still booting showing samsung j2 android. pl help me.

finally got it
Best rom out till date.
thanks @almamun512

No superuser access
I flashed this custom rom today and i like the new UI. But there is no superuser preinstalled although it said installing superuser when flashing the rom. I also installed supersu later using twrp but it says " Your device is unrooted."
How can i install superuser and gain root access ?

Nikeshsml said:
I flashed this custom rom today and i like the new UI. But there is no superuser preinstalled although it said installing superuser when flashing the rom. I also installed supersu later using twrp but it says " Your device is unrooted."
How can i install superuser and gain root access ?
Click to expand...
Click to collapse
I didn't experienced that problem. The phone was rooted only SuperSU app was missing which I installed.

Good day sir. I appreciate your hardwork creating the rom. :good: Will it work on a j200bt rom?

GREAT ROM
Beautiful Rom and fast but the problem i faced was the wifi reconnecting every 2 minutes and cant customize the rom by apps like gravity box ....
battery is friendly and i hope to make update for this vertion of S7 because the S8 Randomly restart without any reason
thanks a lot from my heart .

Rom can be flash in samsung J200GDDUZAQF6
PLEASE REPLY ME

[ROM-sGSI] [ZUI 10.0]/[ZUI 5.0] From Z5 FOR Z2 Plus [Oreo]

What is this?
- sGSI of ZUI 10.0/ 5.0 from Lenovo Z5pro/Z5, based on Android 8.1.0, June 1,2018 security patch.
Since this was requested in some comments, I flashed it and found working for our device flawlessly, with some bugs.
Features?
-All features of ZUI 4 + Soft Charge, gestures, multi space ( dual apps ) etc. Split Screen is also available.
How to flash?
ZUI 10 :
1. Download the flashable zip from the links.
2. Boot to twrp, and wipe dalvik, cache, data, system and vendor.
3. Flash the zip.
4. Reboot.
ZUI 5:
Method 1 : (Recommended)
- 1. Download any treble based 8.1.x rom and ZUI5.0-sGSI.zip (link below).
[Please use MIUI 10 8.11.1 by Narshi Shukla as base ROM, as it seems it's Vendor is most compatible.]
2. Extract the zip in your storage. You will get three files ( two flashable zips and one folder "sGSI.....". [Folder name might differ, there will be only one folder, so no worries])
3. Boot into recovery and take a backup.
4. Clean flash treble based Oreo ROM that you downloaded.
5. From your twrp, use file manager to move " sGSI...." folder to backup folder of Twrp.
6. Mount system and vendor and wipe cache/delvik, data and system.
( Don't wipe firmware and Vendor )
7. Goto restore in your twrp and restore the system from "sGSI....." folder.
8. Flash the remaining two zips.
9. Flash magisk if needed.
10. Wipe cache/delvik and reboot. Done.
Method 2 : https://forum.xda-developers.com/showpost.php?p=78389810&postcount=320
(You need treble based twrp, search if you don't already have).
After following all these steps, if your phone is stuck in Lenovo powered by android screen for long, then force reboot the phone and it will boot up to system.
What works?
-Here:
Call,SMS, VOLTE, Data, play store, Utouch, Fingerprint , Navigation, Double touch to wake, GCAM, Face Unlock, Hotspot, Banking apps, nearly everything.
What doesn't work?
- ROM specific. Bugs depend upon the treble ROM that you used as base. In some ROM, system sounds does not work. In MiUI 10, video recording might not work. Game Mode has some issues with global apps.
*FOR VIDEO RECORDING - see this : https://forum.xda-developers.com/showpost.php?p=78219358&postcount=93 ****
*Update GPU drivers for VULKAN support. Link in the links section.***
Performance?
- Better than ZUI 4, smooth as butter, no stutter playing games like PUBG, notifications on time, decent SOT.
Can it be used as daily driver?
- Yes, if you can live with some Chinese texts in certain apps.
Any other thing?
- Because the ROM is ported from Z5 which has a notch, total area of the notification bar cannot be used. To see things like real time network speed and battery "percentage" you have to pull down the notification bar.
What should I do first after booting the device?
- Install play store from App center. Install magisk to remove bloat wares. Install any music app, since there is none. This will make the system optimal for us.
Also, Turn "True Full Screen Mode" ON in display settings for full screen in Apps.
Install Magisk and download and install "SafteyPatch V2" within Magisk to pass safetynet and hide banking apps in magisk hide to use them.
Open security app and give all important permissions to the apps you use, including system apps. Also include them in autorun/whitelist section.
Links?
-Here
ZUI 10
https://drive.google.com/open?id=17lyWnAl0Kjkv5S89wdtw7HglF2072zP5
ZUI 5
Mega link :
https://mega.nz/#!FyxSiI7Y!iZmmVufR6pipX3mwv_-I3HqI714YAMJN1a2zIysinmc
Gdrive link:
https://drive.google.com/open?id=1F_Ou6x2bj26hhdffw45uo4r9qlJuaDb5
MiUi 10 8.11.1 Narshi Shukla - Full Rom
https://androidfilehost.com/?fid=11410932744536996684
MIUI 10 8.11.1 Narshi Shukla - Vendor for twrp recovery: @(THIS VENDOR isnt compatible with all roms, if facing random reboots, use the complete MIUI 10 ROM for the Gsi)
https://drive.google.com/drive/u/0/folders/15QHEUfLMagMV9jZTmlUHa4hkhkNTF-RC
Working GCAM link :
https://www.celsoazevedo.com/files/android/google-camera/f/MGC_6.1.021_FINAL_V1a_A8.1+.apk
VULKAN enabled open GL 3.2 driver link :
https://drive.google.com/folderview?id=11_atz5CDK9bHG4K_ME2LSRFFnxxKqWw2
Credits:
Not my work, I am just sharing it since I found it working.
All credits goes to this Xiaomi thread and bugrevealingbme.
https://*************/threads/zui-5-0-a-only-treble-rom.226/
******************************** FLASHING ISSUE ******************
While flashing this ROM, try to follow the guide above as strictly as possible. Use the ROM that is recommended.
If you are facing bootloop, download the vendor that is provided and restore it in twrp and then flash patch 1 and 2.
Also remember, during each and every step, your TWRP should have system and Vendor mounted. Check after every step.
Your phone might reboot once or twice during first boot, which is not an issue.
How to know if you flashed it correctly?
-If your phone boots into the system with "Lenovo bootanimation" , you flashed it correctly.
If your phone is stuck in "Lenovo - powered by android" splash image for more than 5 minutes, you got something wrong.
*********************************************************************
Screenshots attached :

what about gcam nd notification bug? and one more doubt, can we flash it over treble pie ROM?

I have one question. If i install a sgsi rom can i back to trenle, non-treble rom just with a simple flash method?

muujeeb said:
what about gcam nd notification bug? and one more doubt, can we flash it over treble pie ROM?
Click to expand...
Click to collapse
gcamera is working on redmi note 5 pro. should work also here.

muujeeb said:
what about gcam nd notification bug? and one more doubt, can we flash it over treble pie ROM?
Click to expand...
Click to collapse
GCAM is working.
Notification bug is not there. Only sometimes, it seems that we get late notification.
You have to flash it over Oreo because the GSI is Oreo based. Flashing over pie should work as well, since treble ROM is required. Take a backup of your system so you can restore easily, if you face any issue.

nonamesry said:
I have one question. If i install a sgsi rom can i back to trenle, non-treble rom just with a simple flash method?
Click to expand...
Click to collapse
Yes, you can get back to the ROM you want with simple flash, no problem.

Custom kernel flashable?

ashwinonm said:
Custom kernel flashable?
Click to expand...
Click to collapse
Haven't tested, but should be flashable.
Edit : Custom kernel might brick the device. Will test and update.
Donot flash custom kernel, it causes self restart of device.
Note: Moxie kernels can be flashed, you should flash patch2 after flashing kernels. But, MIUI 10 comes with moxie R5.1 so no use flashing Moxie again.

link not working

Wow it's so beautiful!

I used Arrow OS 8.1 but it got stuck in bootloop and does'nt boot at all.. I followed all the steps accordingly but it did not boot up even after i kept my phone overnight to let it boot. I don't know where i did wrong.

muujeeb said:
I used Arrow OS 8.1 but it got stuck in bootloop and does'nt boot at all.. I followed all the steps accordingly but it did not boot up even after i kept my phone overnight to let it boot. I don't know where i did wrong.
Click to expand...
Click to collapse
Use MIUI 10 port of Narshi Shukla latest build. It works.
May be Arrow OS cannot be used.
You can also try using Vendor of MIUI 10 once. Restore this vendor and the system image of ZUI.
Here is the vendor:
https://drive.google.com/drive/mobile/folders/15QHEUfLMagMV9jZTmlUHa4hkhkNTF-RC?usp=drive_open

kany1 said:
link not working
Click to expand...
Click to collapse
Link is working fine.

jebish7 said:
Link is working fine.
Click to expand...
Click to collapse
yes it is working with mega app

I used crdroid 8.1 and got stuck in bootloop. then I try restored the vendor but could not flash the patch 2
---------- Post added at 01:19 PM ---------- Previous post was at 01:13 PM ----------
ok i try to flash it again and boot successflly

marclevine said:
I used crdroid 8.1 and got stuck in bootloop. then I try restored the vendor but could not flash the patch 2
Click to expand...
Click to collapse
I think only MIUI 10 rom works flawlessly for this GSI. I will update the main page details and ask to use MIUI 10 only.
You couldnot flash patch 2 because it requires vendor, and may be your vendor is now messed up.
So use MIUI 10 port, it works without any issue.

marclevine said:
I used crdroid 8.1 and got stuck in bootloop. then I try restored the vendor but could not flash the patch 2
---------- Post added at 01:19 PM ---------- Previous post was at 01:13 PM ----------
ok i try to flash it again and boot successflly
Click to expand...
Click to collapse
Glad To hear.

So in whatever rom I am in Oreo , I can use that firmware if I use vendor only from your backup? And shouldn't wipe it?

ashwinonm said:
So in whatever rom I am in Oreo , I can use that firmware if I use vendor only from your backup? And shouldn't wipe it?
Click to expand...
Click to collapse
Well, that's how some people got this working, so yes, it's working that way as well. ( Your ROM should be treble based though )
I will attach the "Vendor" file in the main post as well, so other members can use it too.

custom kernel possible,mine running in moxie