Related
Hi! so i have an issue, i cannot get any magisk modules installed on the latest B05 Rom. i've tried on both the official system from ZTE aswell as community made roms based on B05. I have also tried like 5 different magisk modules non of which want to be installed. What could the issue be and how can i fix it?
senny22 said:
Hi! so i have an issue, i cannot get any magisk modules installed on the latest B05 Rom. i've tried on both the official system from ZTE aswell as community made roms based on B05. I have also tried like 5 different magisk modules non of which want to be installed. What could the issue be and how can i fix it?
Click to expand...
Click to collapse
If you have an early version of Magisk 13.3 that can be the problem. The Magisk Manager that shipped with 13.3 initially was flawed so that it would fail to install modules, or so I read.
But it has happened to me that it just failed to install any module out of the blue, with version 12.0. If that's the case a full system reinstall seems the only way to fix it. you might as well want to use the magisk uninstaller and then install it again, but I don't think that would fix it.
im new at thisxda stuff but i am 90 percent sure i figured out how to keep magisk from uninstalling after a reboot... YOU MAY NEED TO UNINSTALL MAGISK AND ALL MODULES BEFORE DOING THIS USING MAGISK UNINSTALLER basically you have to also install an older version of supersu and it has to be an aroma installer and install as SYSTEM also make a backup of the boot.img just incase you get bricked if you install the supersu app it will say su binary occupied but install should stay install supersu aroma (2.78v2) from https://forum.xda-developers.com/attachment.php?attachmentid=3879523&d=1474248173 before and possibly after magisk install...only tested with magisk 16.2 beta channel and regular install not patched boot on Axon 7 with RR 8.1 weekly 6.0.0 20180225 (us variant) but should work on others probably...let me know how this goes for you
TRY AT OWN RISK I AM NOT RESPONSIBLE FOR DEVICE BOOTLOOPS OR BRICKS
If anyone has a better way to get magisk to hold after a few restarts please let me know
sidenote:this supersu does work with magisk not installed and definately keeps root
(stock boot.img is in initial zip for custom rom) select intall imgs in twrp and flash the boot partition as needed)
ALSO YOU CAN ALWAYS DIRTY FLASH CUSTOM ROM same build or higher IF ALL GOES TO **** AND WONT LOOSE APPS OR DATA AT LEAST ON RR
works for me without problems after last 2 years on any Rom.
dont know what you doing wrong?!
I cant get to bypass safetynet V: other than that root works fine
J0nhy said:
I cant get to bypass safetynet V: other than that root works fine
Click to expand...
Click to collapse
this actually fixed sn for me without the fix installed
Ever tried magisk v15.3? I never had problems with uninstalling, but everything above 15.3 won't pass safety net,at least for me/on stock nougat b10 rom.
desu1337 said:
Ever tried magisk v15.3? I never had problems with uninstalling, but everything above 15.3 won't pass safety net,at least for me/on stock nougat b10 rom.
Click to expand...
Click to collapse
Maybe on stock roms...it should work on l8r versions tho...
try this already https://forum.xda-developers.com/apps/magisk/xiaomi-safetynet-fix-t3600431
also cant have xposed installed with the sn fix
Hey guys,
Just flashed the latest Oxygen update the way i always do but this time i lost root.
Running stock rom with root (Magisk) and TWRP.
Flashed update
Cleaned dalvik/cache
Flashed Magisk.zip
Cleaned dalvik/cache again
Reboot
Twrp is still there, bootloader unlocked, magisk manager works to...... But no root, magisk manager says "magisk is not installed"
Never had this issue before....
g-member said:
Hey guys,
Just flashed the latest Oxygen update the way i always do but this time i lost root.
Running stock rom with root (Magisk) and TWRP.
Flashed update
Cleaned dalvik/cache
Flashed Magisk.zip
Cleaned dalvik/cache again
Reboot
Twrp is still there, bootloader unlocked, magisk manager works to...... But no root, magisk manager says "magisk is not installed"
Never had this issue before....
Click to expand...
Click to collapse
Which oxygenOS? Which magisk version? Did you tried to flash magisk uninstaller before flashing the oxygenOS update and go ahead with the further steps?
Latest Oxygen, and no dit not uninstall magisk before flashing the update, never did and worked fine....
Using Magisk 17.00 latest
g-member said:
Latest Oxygen, and no dit not uninstall magisk before flashing the update, never did and worked fine....
Using Magisk 17.00 latest
Click to expand...
Click to collapse
Which oxygenOS(stable or beta)? Try to install magisk again, use v17. 3 if not working, flash uninstaller as mentioned before
That did the trick, thnx
g-member said:
That did the trick, thnx
Click to expand...
Click to collapse
Which one? To help others you can mark the thread as [SOLVED] in the headline:good:
First flashed the uninstaller and reflashed 17.3 Magisk.
How do i mark this post?
g-member said:
First flashed the uninstaller and reflashed 17.3 Magisk.
How do i mark this post?
Click to expand...
Click to collapse
Edit the title and add [SOLVED] at the beginning.
What is the best way to update Magisk on OP6T. Currently running v17.1 and if I would like to update to latest v18, what is the way to do it and not to brick the phone?
Thank for info
maraschino said:
What is the best way to update Magisk on OP6T. Currently running v17.1 and if I would like to update to latest v18, what is the way to do it and not to brick the phone?
Thank for info
Click to expand...
Click to collapse
You can either update via the Magisk Manager app,or,if you have TWRP,use it to update to the latest Magisk.
FWIW,I have TWRP installed,but,updated using the Magisk Manager app,using the recommended install suggestion given.
Just updated mine via app , after reboot there was no signal , no simcard ,no imei dont panic reboot one more time ,and everything is working as usual.
KOLIOSIS said:
You can either update via the Magisk Manager app,or,if you have TWRP,use it to update to the latest Magisk.
FWIW,I have TWRP installed,but,updated using the Magisk Manager app,using the recommended install suggestion given.
Click to expand...
Click to collapse
I have no TWRP, so I can just install through app and there will be no problem. It will install in the right slot automatically and I will keep root?
maraschino said:
I have no TWRP, so I can just install through app and there will be no problem. It will install in the right slot automatically and I will keep root?
Click to expand...
Click to collapse
Yes, I used the direct install via the Magisk Manager app & immediately rebooted,no problems at all.
KOLIOSIS said:
Yes, I used the direct install via the Magisk Manager app & immediately rebooted,no problems at all.
Click to expand...
Click to collapse
Thx for info
I always update through TWRP. Just updated. Since I always choose the hide magisk option replacing it with a random name I uninstall the app real quick before I reboot to recovery. Used to be if you didn't you would end up with two apps installed. Don't know if this is still an issue or not. Either way all your settings will still be there. I uninstall the app, reboot to recovery, flash Magisk. Boot back into the OS, all my settings are already there, so the only thing I have to do is rehide Magisk.
Do this update fix the charge problem when the device is off?
ELGeKo24 said:
Do this update fix the charge problem when the device is off?
Click to expand...
Click to collapse
Didn't fix it for me.
OS 9.0.7.
TWRP 3.2.3-9
Magisk v18
I'm having issues acquiring superuser rights with the new update (stock rom/kernel). On some apps it works on others it doesn't pop up with a notification, Titanium Backup being a notable one.
Any ideas?
edit: got it working by increasing the length of time before timeouts from 10sec to 60sec.
I usually start over.
I flash a virgin boot age to both slots.
Reboot with TWRP
Install TWRP zip
Install ElementalX and Magisk zips.
Change slots and reboot recovery
Install ElementalX and Magisk in this slot.
I have the same OS version and kernels etc flashed in both slots.
lostunsunghero said:
I'm having issues acquiring superuser rights with the new update (stock rom/kernel). On some apps it works on others it doesn't pop up with a notification, Titanium Backup being a notable one.
Any ideas?
edit: got it working by increasing the length of time before timeouts from 10sec to 60sec.
Click to expand...
Click to collapse
Or you can also disable the Battery Optimisation for Magisk
Hey guys, sorry for my stupid asking. I have following case:
I had installed an old version of magisk. Today I got the update offered in magisk manager app. I updated the manager first, now I have 2 magsik manager apps in my device. I opened the new one and it says that I haven't installed the latest version. So far so good.
I downloaded the latest V18.1 from GitHub and installed the zip via twrp.
It installed normally and booted as always.
But I still have 2 versions of the manager apps in my device. Old one says I have V18.1 installed, root access is there. Checked it with root checker.
The new manager app says that I haven't installed the latest version and I have an update available.
Does anyone have an idea how I can get to a normal state with 1 manager app ?
KOLIOSIS said:
You can either update via the Magisk Manager app,or,if you have TWRP,use it to update to the latest Magisk.
FWIW,I have TWRP installed,but,updated using the Magisk Manager app,using the recommended install suggestion given.
Click to expand...
Click to collapse
What is the recommended install suggestion? Only Zip or with Boot image patch?
Calvin1997 said:
Hey guys, sorry for my stupid asking. I have following case:
I had installed an old version of magisk. Today I got the update offered in magisk manager app. I updated the manager first, now I have 2 magsik manager apps in my device. I opened the new one and it says that I haven't installed the latest version. So far so good.
I downloaded the latest V18.1 from GitHub and installed the zip via twrp.
It installed normally and booted as always.
But I still have 2 versions of the manager apps in my device. Old one says I have V18.1 installed, root access is there. Checked it with root checker.
The new manager app says that I haven't installed the latest version and I have an update available.
Does anyone have an idea how I can get to a normal state with 1 manager app ?
Click to expand...
Click to collapse
Same thing with me. I tried it twice to set of something weird happened with the same result. And if you do a safetynet check on the old app it deletes the new one for me for some reason.
bladestonez said:
Same thing with me. I tried it twice to set of something weird happened with the same result. And if you do a safetynet check on the old app it deletes the new one for me for some reason.
Click to expand...
Click to collapse
You're right. If tried the safetynet check on the new one, and after that the new one was removed. Completely strange. I hope someone here knows what to do
No problem here just selected install then used recommended.
spjetrovic said:
No problem here just selected install then used recommended.
Click to expand...
Click to collapse
What's the recommended option? I have the options flash zip and patch Boot image but there isn't any "recommended" mark
spjetrovic said:
No problem here just selected install then used recommended.
Click to expand...
Click to collapse
So you just did the direct install option? Also are you running magisk with or without TWRP?
Calvin1997 said:
What's the recommended option? I have the options flash zip and patch Boot image but there isn't any "recommended" mark
Click to expand...
Click to collapse
This is what I get when I install from magiek manager.
Yes with TWRP
Recently i had a hard brick i had to do a recovery from. So far ive got everything back to working order with latest TWRP installed and everything is working with no problems since. But now I try to install Magisk through TWRP, have the latest version and Magisk manager installed, after its finished it dosent boot. I have to restore from my latest backup after. Also same thing happened when trying to install SuperSu. Anyway to fix this?
What firmware or ROM are you currently running, and what version of magisk are you using?
kwebber321 said:
Recently i had a hard brick i had to do a recovery from. So far ive got everything back to working order with latest TWRP installed and everything is working with no problems since. But now I try to install Magisk through TWRP, have the latest version and Magisk manager installed, after its finished it dosent boot. I have to restore from my latest backup after. Also same thing happened when trying to install SuperSu. Anyway to fix this?
Click to expand...
Click to collapse
Before you root your device, you must replace your stock kernel.
Most people use ElementalX.
https://forum.xda-developers.com/moto-g4-plus/development/kernel-elementalx-g4-0-01-t3424836/page192
Flash ElementalX through twrp, go through setup and then flash magisk. You'll do good.
If you're confused about ElementalX setup, go through installation tutorials.
Cheers.
ALPH000 said:
Before you root your device, you must replace your stock kernel.
Most people use ElementalX.
https://forum.xda-developers.com/moto-g4-plus/development/kernel-elementalx-g4-0-01-t3424836/page192
Flash ElementalX through twrp, go through setup and then flash magisk. You'll do good.
If you're confused about ElementalX setup, go through installation tutorials.
Cheers.
Click to expand...
Click to collapse
Is there a custom kernel known to be compatible with the stock Pie ROM?
harryspar said:
Is there a custom kernel known to be compatible with the stock Pie ROM?
Click to expand...
Click to collapse
Do you mean the stock Oreo firmware? We don't have stock Pie
If so, there's ElementalX 3.0.1 https://forum.xda-developers.com/moto-g4-plus/development/kernel-elementalx-g4-0-01-t3424836 or Loony: https://forum.xda-developers.com/moto-g4-plus/development/3-10-108-loony-kernel-t3726793
echo92 said:
Do you mean the stock Oreo firmware? We don't have stock Pie
If so, there's ElementalX 3.0.1 https://forum.xda-developers.com/moto-g4-plus/development/kernel-elementalx-g4-0-01-t3424836 or Loony: https://forum.xda-developers.com/moto-g4-plus/development/3-10-108-loony-kernel-t3726793
Click to expand...
Click to collapse
For Nougat, stock kernel is not rootable.
You have to replace it with elementalx kernel and then flash magisk.
However, when talking about Oreo stock firmware,
Situation gets inverted.
When flashed magisk with ElementalX 3.0.1, phone will not boot up.
And, stock kernel can be easily rooted by simply flashing magisk.
So, there is no need of ElemenralX kernel for rooting Oreo stock ROM unless you need it.
You're correct. I meant Oreo.
On my device it never works. Not on the stock kernel, or elemental, or loony.
It boot loops until I run the Magisk uninstaller.
harryspar said:
You're correct. I meant Oreo.
On my device it never works. Not on the stock kernel, or elemental, or loony.
It boot loops until I run the Magisk uninstaller.
Click to expand...
Click to collapse
Hmm, that's odd - are you using magisk 19.3 or a recent version of magisk? When you flashed magisk, did you wipe cache before rebooting?
Is this behaviour observed on completely stock firmware (i.e. you've restored back to full stock Oreo, including a clean stock boot kernel)?
echo92 said:
Hmm, that's odd - are you using magisk 19.3 or a recent version of magisk? When you flashed magisk, did you wipe cache before rebooting?
Is this behaviour observed on completely stock firmware (i.e. you've restored back to full stock Oreo, including a clean stock boot kernel)?
Click to expand...
Click to collapse
I think so. I will double check.
I actually don't need Magisk - my goal is to install Xposed. So in theory I could just try a different superuser. I'm just used to Magisk.
harryspar said:
I think so. I will double check.
I actually don't need Magisk - my goal is to install Xposed. So in theory I could just try a different superuser. I'm just used to Magisk.
Click to expand...
Click to collapse
I hope you get xposed working on Oreo - if you do get magisk functioning, maybe this xposed plugin could work? https://forum.xda-developers.com/xposed/unofficial-systemless-xposed-t3388268
Else there's edxposed https://forum.xda-developers.com/xposed/list-xposed-modules-android-pie-ed-t3892768 though I have no idea if xposed functions on stock Oreo.