i know its a long shot but maybe someone can help me out. While on the phone (6T T-mobile) my screen turns on calls put on hold/mute/speaker. is there anything can be done is there a setting that needs to be adjusted. Today was a crazy one phone managed to merge call i had on hold.
Thank you in advance.
sf103100 said:
i know its a long shot but maybe someone can help me out. While on the phone (6T T-mobile) my screen turns on calls put on hold/mute/speaker. is there anything can be done is there a setting that needs to be adjusted. Today was a crazy one phone managed to merge call i had on hold.
Thank you in advance.
Click to expand...
Click to collapse
Grammer?
Related
For some reason my 8525 won't ring on incoming calls. I have checked to make sure the ringer is set up in the phone and sounds settings and can even test the sound from there and it works fine, but no ringer will work when there is an actual incoming call. The vibrate feature works and other notification sounds work fine, just not for an actual incoming call. I've tried soft resetting the device, including pulling the battery and have even tried restoring to a couple of day old backup (when the ringer was working), but still no ringer. Is there a registry setting for this I can check? Any suggestions would be much appreciated.
Figured out the problem...no help needed. thanks
mine is doing the same thing...could you pls share how you fixed it?
rekx said:
mine is doing the same thing...could you pls share how you fixed it?
Click to expand...
Click to collapse
I'm embarrassed to say that I simply had the volume for the ringer turned all the way down on the today screen.
hahah dont feel alone - i just discovered this was the source of my problems too (after spending hours trying to diagnose a much more difficult problem). glad i hadnt gone with the hard reset
haha.
lmao
we all learn from our dumb mistakes
haha
kvasir said:
hahah dont feel alone - i just discovered this was the source of my problems too (after spending hours trying to diagnose a much more difficult problem). glad i hadnt gone with the hard reset
haha.
Click to expand...
Click to collapse
I spent far too long far too long working this out too.
I'm about to flash back to original and relock my phone so that I can send it back to Cingular... I don't want to because thanks to everyone on these forums I've got an awesome phone with tons of kit that does everything I need except... it usually DOES NOT RING if there is an incoming call and the device is not actually running.
I have gone through a ton of new roms and radio roms and vanilla roms and I have found that since day one my Cingular 8125 does not ring more than half the time. Anyone else have this issue? I can't seem to find anything like it in the forums and I'm worried that I won't be able to get it replaced under warranty... I guess that's why there's a contract!
Wish me luck and shoot me some advice if you can, thanks to Faria, Molski, and Anichillus for the awesome ROMs, hopefully one of you gentlemen will know what's F#@%ed with my device!?!?!
Gracias,
El Borba
Update
I just wanted to clarify that my device rings reliably when it's powered on but rarely, possibly never, rings when it's suspended off.
When I'm at work I can hear the speakers on my desk whistle and pop when there's a call incoming on the 8125 but I have to hit the power button in order to get the call! When I do hit the power I can talk on the phone but if I don't it doesn't ring or vibrate or even light up. It just remains suspended.
Thanks again for any suggestions folks,
Brandon
Hello,
I use the device and Abaoseniyah subject Venratiq belt.
When I making or receive calls sometimes created a situation disconnects the call and / or passes Autmteat call waiting because the instrument hardware buttons.
my phone locked all the time I was turning off.
I tried the twikes and a few options but I can not find anything .... The idea only costs me at the top of the buttons is a pair of these to another program and the phone thing I did not want to do
Is anyone else experiencing this Evevayyah?
Does someone have an idea what a creative what to do to avoid this ?
Thanks in advance,
Daniel
sombudy.......???
daniel76 said:
Hello,
I use the device and Abaoseniyah subject Venratiq belt.
When I making or receive calls sometimes created a situation disconnects the call and / or passes Autmteat call waiting because the instrument hardware buttons.
my phone locked all the time I was turning off.
I tried the twikes and a few options but I can not find anything .... The idea only costs me at the top of the buttons is a pair of these to another program and the phone thing I did not want to do
Is anyone else experiencing this Evevayyah?
Does someone have an idea what a creative what to do to avoid this ?
Thanks in advance,
Daniel
Click to expand...
Click to collapse
My english is far to bad to understand this. sorry
I had a similiar problem... I installed A_C's S2U2 and seems to help... free program available here... feel free to donate to A_C though... he does GREAT work... http://s2u2.eqvipage.dk/wip.html
u mean slide to unlock ?
Hi guys, this is my first post - very exciting.
I've had the HD2 for 3 weeks now and I love it. The only issue I have is with it dropping calls. I don't think it handles the handover from cell to cell very well but that's not my main issue as it happened from time to time on other phones too. My main query is with the clever accelerometer related functions. According to the manual, during a call if you put it face down it activates the speaker. Mine just ends the call. I think that it is getting confused during calls if I move and cutting me off. Done two hard resets but no joy. Does anyone know how to disable the function either through settings or registry?
I've looked around for quite a while on the forum and can't find what I'm looking for. Can anyone point me in the right direction?
Cheers
Dan
PS It has stock O2 ROM, BSB tweaks, etc
Danno320 said:
Hi guys, this is my first post - very exciting.
I've had the HD2 for 3 weeks now and I love it. The only issue I have is with it dropping calls. I don't think it handles the handover from cell to cell very well but that's not my main issue as it happened from time to time on other phones too. My main query is with the clever accelerometer related functions. According to the manual, during a call if you put it face down it activates the speaker. Mine just ends the call. I think that it is getting confused during calls if I move and cutting me off. Done two hard resets but no joy. Does anyone know how to disable the function either through settings or registry?
I've looked around for quite a while on the forum and can't find what I'm looking for. Can anyone point me in the right direction?
Cheers
Dan
PS It has stock O2 ROM, BSB tweaks, etc
Click to expand...
Click to collapse
In terms of dropping calls, it is usually due to the handover sequence between cellsites, rather than the handset itself.
I'm guessing you are on O2? If so, PM me your location and I'll get my "inside contact" to take a look at any outstanding issues there.
I must admit, I've not used that accelerometer feature yet, but I have turned it on. (Under Settings -> Sound & Display -> Ring and Notifications)
Erm.. This might sound like a dumb post but I was having problems with call disconnection whilst in the middle of calls. I discovered the problem - I'm LEFT HANDED!
When I used the device I held it in my right hand and type/operate with my left. When I held the phone to my right ear to have a conversation I was occasionaly touching my cheek with the call-end button and that's how I was getting repeated disconnections - true story.
I am now a practicing ambidextarian...
Thanks for getting back so quickly guys
a practicing ambidextarian eh............ I wish I could breathe underwater! (sorry I couldn't resist it)
I don't think I'm cutting off the call through contact with the screen all the time though but yes I have done it more than once!
Thanks for the info rp-x1. I'm in Settings -> Sound & Display -> Ring and Notifications and the only thing that looks relevant is the 'Quiet ring on pickup' option and I'm not sure it's related. For instance, I got a call early yesterday morning and answered the call in bed. When the wife elbowed me and I turned on my side the phone assumed I was putting it face down and ended the call. I'm looking to disable this function.
Dropping Phone calls even in locked screen state
I am also dropping a alot of calls . Not sure if it is related to face down as the phone is always upright after answring a call. May be the call end button.
Having said that the phone was locked when I received a call today. I moved the slider to answer said "hello", then after 3 seconds it disconnected.
Any ideas?
Thanks
edit: Seems like a proxomity sensor issue, judging by other threads. Will continue to search for a fix/workaround.
htc hd2 dropping calls
Hi everyone,
I have a htc hd2 since 1/2011, love the phone BUT i HATE the dropping calls problem!! Please help. also will upgrade to windows 7 help with this problem.
I hardly use the phone to make calls, so I'm not sure if the calls dropping in the past is any relation, but as stated by Danno320, according to the manual ( i went back looking for this ), turning the phone face-down will activate speakerphone.
This is so exciting... so I tried it a few times.
All it did was to disconnect the calls.
I wonder if the action really does turn the speakerphone on.
Anyone who's tried and succeeded?
I also want to know if there's a solution to this now that I know my phone isn't functioning like what the manual said it should be...
This happened almost every time when I receive a call.
When I pick up the phone as normal,
a few seconds later, the call is still going on but I am not able to hear anything.
Not even a noise!
I'm not sure whether this is a rom issue, kernel issue or the sim card...
Can anyone help me please?
Many thanks!
Could be either one. Try flashing a different kernel, if that doesn't fix it, try flashing a different rom.
xecut said:
This happened almost every time when I receive a call.
When I pick up the phone as normal,
a few seconds later, the call is still going on but I am not able to hear anything.
Not even a noise!
I'm not sure whether this is a rom issue, kernel issue or the sim card...
Can anyone help me please?
Many thanks!
Click to expand...
Click to collapse
Were you using BT headset with WiFi was on?
http://forum.xda-developers.com/showthread.php?t=2046479
xecut said:
This happened almost every time when I receive a call.
When I pick up the phone as normal,
a few seconds later, the call is still going on but I am not able to hear anything.
Not even a noise!
I'm not sure whether this is a rom issue, kernel issue or the sim card...
Can anyone help me please?
Many thanks!
Click to expand...
Click to collapse
Just in case: for incoming call if you swipe from right to left you do not hear anything while the caller gets your voice mail. If you swipe from left to right you get the call.
xecut said:
This happened almost every time when I receive a call.
When I pick up the phone as normal,
a few seconds later, the call is still going on but I am not able to hear anything.
Not even a noise!
I'm not sure whether this is a rom issue, kernel issue or the sim card...
Can anyone help me please?
Many thanks!
Click to expand...
Click to collapse
It happens to me everytime I install Xlouder mod or any xLOUD mod, solution: reflash your rom