hi
there is a galaxy a5 that stuck on logo. when wanna flash it by odin got error "There is no PIT partition"
i wanted flash by pit file too got "write operation failed" error
any solution?
I got this S7, wanted to flash 930U firmware to use T-Mobile but a failed flash has me in a boot loop. I fully updated before trying to flash, so it is I assume on the newest bootloader, etc.
I have attempted the newest firmware files that I can find (G930AUCS4BQL1) but am still getting the SW REV CHECK FAIL through Odin.
Are there files available that will fix this, do I just need to wait for them to come out, or have I bricked this thing?
Thanks for any help and have a great day!
Update:
- Using PrinceComsy Odin results in: FAIL! (Auth)
- USB Debugging is OFF and I am unable to boot to change that
- I am leaving the BL file blank in ODIN
perhaps you should try using offcial odin when flashing official images.
try version 3.12.3. whatever you do, don't use the princecomsy version unless for flashing engboot
Friends my samsung J5 is with a green screen with triangle (an error has occurred while) more every time I try in the odin always give the same error in all roms, at least the ones I tested, the error is NON-HLOS.bin , which I should do since samart switch no longer has the option of reculperation, nor the old version of kies more support, someone has a solution ..
When rooting my S7, it got stuck in a bootloop. When I attempted to flash back to the factory firmware, ODIN failed, and now my phone is totally bricked. I can enter download mode, but not recovery mode. When attempting to flash the latest update firmware (04/19), it continues to fail with a "SW REV CHECK FAIL: [system]Fused 3 > Binary 1" error code, which I've found is supposed to mean that I'm downgrading firmware, but it's simply not the case. I've checked my drivers, tried different versions of ODIN, etc. but nothing works.
Any ideas?
maelstromm15 said:
When rooting my S7, it got stuck in a bootloop. When I attempted to flash back to the factory firmware, ODIN failed, and now my phone is totally bricked. I can enter download mode, but not recovery mode. When attempting to flash the latest update firmware (04/19), it continues to fail with a "SW REV CHECK FAIL: [system]Fused 3 > Binary 1" error code, which I've found is supposed to mean that I'm downgrading firmware, but it's simply not the case. I've checked my drivers, tried different versions of ODIN, etc. but nothing works.
Any ideas?
Click to expand...
Click to collapse
Try a couple different firmwares, for me it hasn't always worked on my first try. You could also try the prince comsey Odin instead that may or may not help depending on which firmware you are flashing.
maelstromm15 said:
When rooting my S7, it got stuck in a bootloop. When I attempted to flash back to the factory firmware, ODIN failed, and now my phone is totally bricked. I can enter download mode, but not recovery mode. When attempting to flash the latest update firmware (04/19), it continues to fail with a "SW REV CHECK FAIL: [system]Fused 3 > Binary 1" error code, which I've found is supposed to mean that I'm downgrading firmware, but it's simply not the case. I've checked my drivers, tried different versions of ODIN, etc. but nothing works.
Any ideas?
Click to expand...
Click to collapse
Give bra1 build a try if you haven't. I upgraded too far with an AT&T firmware and had to Odin bra1 first on the U variant firmware, then could Odin bra1 V variant firmware. Here is the V variant you can try first: https://androidfilehost.com/?fid=962187416754456736
Also post your bootloader info. See if your phone still shows G930V or if it's switched to G930U variant and if it says build/baseband version post that too please. Both "too new of a bootloader" and mismatched models can be the cause of that
Edit: Here is another full version of the 4/19 firmware you mention: https://androidfilehost.com/?fid=818070582850509181
Repair Assistant will restore your phone https://www.verizonwireless.com/support/knowledge-base-80201/
DabbingDuke said:
Repair Assistant will restore your phone https://www.verizonwireless.com/support/knowledge-base-80201/
Click to expand...
Click to collapse
Sadly this can fail from even a 930U vs 930V variant difference. It's great when it works but not a great fallback if you have tried any other variant Odin/rom
djh816 said:
Give bra1 build a try if you haven't. I upgraded too far with an AT&T firmware and had to Odin bra1 first on the U variant firmware, then could Odin bra1 V variant firmware. Here is the V variant you can try first: https://androidfilehost.com/?fid=962187416754456736
Also post your bootloader info. See if your phone still shows G930V or if it's switched to G930U variant and if it says build/baseband version post that too please. Both "too new of a bootloader" and mismatched models can be the cause of that
Edit: Here is another full version of the 4/19 firmware you mention: https://androidfilehost.com/?fid=818070582850509181
Click to expand...
Click to collapse
Thanks for your help here!
I went back to BRA1 build but can't seem to change back to VZW
In download mode it says that it is a G930A
Code:
<ID:0/038> Odin engine v(ID:3.1207)..
<ID:0/038> File analysis..
<ID:0/038> skip file list for home binary
<ID:0/038> persist.img.ext4
<ID:0/038> Home Binary Download
<ID:0/038> SetupConnection..
<ID:0/038> Initialzation..
<ID:0/038> FAIL! SHA256 is invalid
<OSM> All threads completed. (succeed 0 / failed 1)
I seem to remember Odin being an issue for me too at some point, do you have Odin v3.12 PrinceComsy?
I do have his Odin. For some reason it comes up a Chinese error when trying to run it. Will redownload tomorrow again.
Do you have any specific firmware that should work? Doesn't necessarily need to be VZW as I'm traveling and will use a different GSM sim.
Thanks!
turnert said:
Try a couple different firmwares, for me it hasn't always worked on my first try. You could also try the prince comsey Odin instead that may or may not help depending on which firmware you are flashing.
Click to expand...
Click to collapse
PalmCentro said:
I do have his Odin. For some reason it comes up a Chinese error when trying to run it. Will redownload tomorrow again.
Do you have any specific firmware that should work? Doesn't necessarily need to be VZW as I'm traveling and will use a different GSM sim.
Thanks!
Click to expand...
Click to collapse
I tested out one of the Oreo AT&T builds and ended up having to revert. Here was my route:
1) odin SM-G930U_1_20170516105039_fspus9jwu3_fac.zip
2) download verizon wireless software upgrade tool, restore to U variant firmware it offers (in my case BRA1)
3) odin G930VVRS4BRA1_G930VVZW4BRA1_VZW
If that doesn't work, try other full odin builds recent/old. Good luck!
Edit: I assume you know this but all USA variants with locked bootloader are the same hardware so A, U, V variants should all "work" but then its up to which version of firmware, which bootloader you currently have, which model you current have shown in bootloader. I had the best luck switching the A variant back to U, then to V. When i tried to go directly from the A firmware back to V variant directly, odin failed and Verizon's tool was useless cause it wasn't a V variant model at the time.
I Have a J3 SM-J320A and I want to install the Canada Firmware SM-J320W8. If I try to flash the ROM with ODIN appears a bootloader error on the phone and fails to flash sboot.bin.
Is there a way for install the firmware or make .tar file without the bootloader?
I made a .tar file just with system.img file and another file without sboot.bin for try to flash it with odin but when I press start ODIN closes by itself.
Both models have the same chipset and supports the same frequency networks.