Database Users

[Q] Help ! Stuck at Odin mode !

So i follow http://forum.xda-developers.com/xperia-l/development/rom-updated-ios7-extreme-edition-t2560915 to install a ROM then I realize that is a JB rom .
Now my phone stuck at Odin mode and could not do normal boot
Detail:
Could not do normal boot.
ODIN MODE
PRODUCT NAME : SM-N9005
CURRENT BINARY :Custom
SYSTEM STATUS : CUSTOM
REACTIVATION LOCK (KK) : OFF
KNOX KERNEL LOCK : 0X0
KNOX WARRANTY VOID : 0X1
QUALCOM SECUREBOOT : ENABLE (CSB)
RP SWREV : S2,T2,R2,A3,P3
WIRTE PROTECTION : Enable
USC START
I tried restored my nanoid backup but it doesn't work , please help !

Problem solved
Solution : I use Odin to install stock firmware and everything works fine now

Need urgent assistance on rooting galaxy s5 sm900f

WHEN I TRIED USING ODIN
FOR ROOTING
ODIN MODE
PRODUCT NAME:SM-900F
CURRENT BINARY: SAMSUNG OFFICIAL
SYSTEN STATUS: OFFICIAL
REACTIVATION LOCK(KK): ON
KNOX WARRENTY VOIO: 0X0
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV : S1 T1 R1 A1 P1
UDC START
SECURE CHECK FAIL : RECOVERY
WHAT DO I NEED TO DO
PLS ADVICE
MY EMAIL
([email protected]):crying:

When i rooted my g900f it wasnt so long ago , i flashed twrp on odin then flashed in twrp supersu zip which can be found on chainfires web, google both , u'll find sumting

Try turning of your reactivation lock.

Reactivation lock would be my guess. It stops a lot of people until they turn it off.

Samsung Galaxy Core Prime - Odin Mode Firmware issue, recover is Kies and try again!

Hi all,
I have tried almost everything to bypass my old device.
I have used Odin with TWRP, and it says its FRP locked.
As soon as the screen comes on(no matter what key combo I press) this is what I see:
ODIN MODE (MULTI CORE DOWNLOAD)
PRODUCT NAME: SM-G361F
CURRENT BINARY:Samsung Official
SYSTEM STATUS: Official
FRP LOCK: ON
KNOX WARRANTY VOID: 0x0
Secure Download : Enabled
RP SWREV: S1, L1, M1
Underneath there is a message: Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again.
I have tried Kies (all versions), I have used the .tar files in odin on the AP tab but I get a prompt that it's FRP locked (in green text) along with the message above. I cant get into the download modeof the phone. Is there any way around this? Probably not but worth a shot in the dark.
Appreciate it if you can find a solution.

jeff8585 said:
Hi all,
I have tried almost everything to bypass my old device.
I have used Odin with TWRP, and it says its FRP locked.
As soon as the screen comes on(no matter what key combo I press) this is what I see:
ODIN MODE (MULTI CORE DOWNLOAD)
PRODUCT NAME: SM-G361F
CURRENT BINARY:Samsung Official
SYSTEM STATUS: Official
FRP LOCK: ON
KNOX WARRANTY VOID: 0x0
Secure Download : Enabled
RP SWREV: S1, L1, M1
Underneath there is a message: Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again.
I have tried Kies (all versions), I have used the .tar files in odin on the AP tab but I get a prompt that it's FRP locked (in green text) along with the message above. I cant get into the download modeof the phone. Is there any way around this? Probably not but worth a shot in the dark.
Appreciate it if you can find a solution.
Click to expand...
Click to collapse
SAME. Did you fix it somehow?

i need some Help at S7 Edge FRP Lock

Hello, i got an S7 Edge.
Its FRP locked and on Android 8.0.
What do i have to do? Downgrade to ? 7 / 6 to unlock it with the Bluethooth Method?
And what Bootloader do i have? is it too high to downgrade?
Which Rom should i flash?
ODIN MODE
Download SPEED: FAST
PRODUCT NAME : SM-G935F
CURRENT BINARY : Samsung Official
SYSTEM STATUS: Official
FRP LOCK : ON
Secure Download : Enabled
Warranty VOID: 0 (0x0000)
AP SWREV: B:3 K:1 S:2
Android Recovery says:
samsung/hero2ltexx/hero2lte
8.0.0/R16NW/G935FXXS3ERHD
thanks a lot
greets from germany

download original rom and flash with ODIN
i used this rom yesterday happen with me also
BTU-G930FXXU2ERD5-20180502100231
its only for G930F

AlbertXDA069 said:
Hello, i got an S7 Edge.
Its FRP locked and on Android 8.0.
What do i have to do? Downgrade to ? 7 / 6 to unlock it with the Bluethooth Method?
And what Bootloader do i have? is it too high to downgrade?
Which Rom should i flash?
ODIN MODE
Download SPEED: FAST
PRODUCT NAME : SM-G935F
CURRENT BINARY : Samsung Official
SYSTEM STATUS: Official
FRP LOCK : ON
Secure Download : Enabled
Warranty VOID: 0 (0x0000)
AP SWREV: B:3 K:1 S:2
Android Recovery says:
samsung/hero2ltexx/hero2lte
8.0.0/R16NW/G935FXXS3ERHD
thanks a lot
greets from germany
Click to expand...
Click to collapse
Downgrade Binary 3 is not possible
AP SWREV: B:3 K:1 S:2 (B:3 is your binary)
Yo can try using combination file metod for dissable OEM Lock

Google FRP is pretty tough. It uses a different partition for storing lock status. so flashing DATA partition (Factory reset, Wiping, etc) wont work. Also flashing system partition (flashing a new rom into system partition, Updating rom, etc) wont work. This tool may worth checking out.
FRP bypass apk

eriktirador said:
Downgrade Binary 3 is not possible
AP SWREV: B:3 K:1 S:2 (B:3 is your binary)
Yo can try using combination file metod for dissable OEM Lock
Click to expand...
Click to collapse
Thank you, could you send me a Link for the right Combination file?
thanks

AlbertXDA069 said:
Thank you, could you send me a Link for the right Combination file?
thanks
Click to expand...
Click to collapse
https://forum.xda-developers.com/s7-edge/help/file-combination-firmware-binary-3-t3853926
Flash it in AP via Odin

eriktirador said:
https://forum.xda-developers.com/s7-edge/help/file-combination-firmware-binary-3-t3853926
Flash it in AP via Odin
Click to expand...
Click to collapse
Thank you very much, ill try it later when i get home from work:fingers-crossed:

https://forum.xda-developers.com/s7-edge/how-to/how-to-remove-frp-lock-guide-t3855793 I MADE THIS GUIDE

J7 Boot Issue

I was trying to reflash back to stock and guess I've flash the firmware of an wrong model or something.
Now it shows me only a black screen after the Samsung logo. I can boot into recovery however there is no display (I can see the MTP enabled on my computer).
Also, I've tried to reflash other versions from my own region, Odin mode refuses to flash them.
Odin mode reads:
Code:
PRODUCT NAME: SM-J730G
Current Binary: Custom (0xd)
FRP LOCK: OFF
OEM LOCK: OFF
Secure Download: Enabled
WARRANTY VOID (0x030c)
RP SWREV B:-1 K:3 S:4
Trying to flash from J730GUBSACTC5 J730GZTOACTC1:
Code:
SW REV. CHECK FAIL(BOOTLOADER) DEVICE: -1, BINARY: 10
Which bootloader is compatible with binary -1 anyway? Please help.

I have the same, any update?

Piotr020798 said:
I have the same, any update?
Click to expand...
Click to collapse
Nope, my screen is fake/replacement and samsung's bootloader cannot be downgraded. What a load of bull.
I'm guessing 0xc or 0xd is the bootloader version so I'll try finding a firmware that has this. If this is a screen problem then this device is p much toast since I'll not be replacing it again.