This ROM is based on Nightly version AICP but its Stable for daily use.
FEATURES:
All AICP features
Lollipop features (customized by AICP)
BUGS:
Unresized BootAnimation [on the center] (I did this on purpose, if you want you can change.)
Sees there is a sim card in tablet but there isn't. [Says "NO SERVICE"] (You can disable with " Permanent GSM solution down below)
Little bugs [does not affects daily use]
Can't install GAAPS because system partition is small (FIXED IN VERSION 2 ! - FIXED IN V2 !)
_-----------------------------------------------_
Permanent GSM solution:
1) not avaliable instructions
2) when way to disable cellular its entered ti here
INSTALLATION:
1. Install TWRP Recovery [if you haven't]
2. Boot into recovery mode
3. Wipe "System,Data,Cache,Dalvik Cache"
4. Flash ROM file from install zip section
Note: If you will flash GAAPS don't reboot after flashing system, flash GAAPS before rebooting.
Note2: Download v2 if you need flashing GAAPS.
XDA:DevDB Information
AICP SM-T800, ROM for the Samsung Galaxy Tab S
Contributors
romngenie
ROM OS Version: 5.1.x Lollipop
ROM Firmware Required: TWRP
Based On: AICP
Version Information
Status: Stable
Created 2016-06-25
Last Updated 2016-06-25
hello, after searching I've found out that AICP stand for Android Ice Cold Project. May I ask if it look like Cyanogenmod or the AOSP ? first time I hear about it...
and just to know, why isn't it on the list of : http://dwnld.aicp-rom.com/?device=all&type=all ? for the chagallwifi T-800 ?
zigonneux said:
hello, after searching I've found out that AICP stand for Android Ice Cold Project. May I ask if it look like Cyanogenmod or the AOSP ? first time I hear about it...
and just to know, why isn't it on the list of : http://dwnld.aicp-rom.com/?device=all&type=all ? for the chagallwifi T-800 ?
Click to expand...
Click to collapse
Because i just created a XDA project. I cant contacted to AICP
Sent from my Asus ZenFone 2 Laser (ZE550KL) using XDA Labs
nice rom but some errors: can't check for update. Can't install any gapps because lack of space in the system file. Very fast rom , but can't test anything else.
zigonneux said:
nice rom but some errors: can't check for update. Can't install any gapps because lack of space in the system file. Very fast rom , but can't test anything else.
Click to expand...
Click to collapse
System partition is 300-450 MB i dont know why you can't install GAAPS (Fixed in V2 of ROM)
Can't check for update because its unofficial and no more updated . (except bug fixes)
Thanks for installing.
zigonneux said:
nice rom but some errors: can't check for update. Can't install any gapps because lack of space in the system file. Very fast rom , but can't test anything else.
Click to expand...
Click to collapse
YOU CAN INSTALL GAAPS LIKE THIS: (GAAPS FIXED IN V2 - TRY V2 WITHOUT ANY "occupation")
1. Download and install V2 of the ROM.
2. Install Gaaps.zip (install pico)
download says: Uploaded: 2016-Jul-19 , so I guess that the Fixed file is not there yet. I'll wait for the Fix and test for the fun of it... post the link when the fixed file is ready. I'm too lazy to deal with the Solution : decompress and recompress etc.
zigonneux said:
download says: Uploaded: 2016-Jul-19 , so I guess that the Fixed file is not there yet. I'll wait for the Fix and test for the fun of it... post the link when the fixed file is ready. I'm too lazy to deal with the Solution : decompress and recompress etc.
Click to expand...
Click to collapse
GAAPS is fixed in V2 version.
http://forum.xda-developers.com/devdb/project/dl/?id=19411
there is V2 Link.
You dont need uncompress and other techniques for this. Just download V2 and your GAAPS will fixed.
And i know i dont update this ROM except bug fixes.
SM-T800 cihazımdan Tapatalk kullanılarak gönderildi
#Version 1.0 Features
- based on the latest CN_RSZOT1JF13L153;
- official camera app by Nubia;
- official IR remote app by Nubia.
#Bugs
Have not found any so far
#Download
https://download.mokeedev.com/?device=nx531j
#Prerequisites
- Nubia Z11;
- Last Package of Mokee ROM (MK60.1-nx531j-170203-RELEASE.zip)
- Open Gapps (arm64, 6.0, nano); Available at the download location
- TWRP installed. (I have used the modded TWRP for N531j which includes Root)
#Procedure
- copy ROM and Gapps .zip files on the phone;
- enter the recovery (press simultaneously power and volume- button)
- wipe data;
- install ROM from TWRP;
- install Gapps;
- reboot the device;
#Others
- I have also installed arm64 xposed and it is running fine. Download available at the same location mentioned above
Additionally I have installed the Advanced Kernel Tweaks from the Oneplus 3 forum for Qualcomm Snapdragon 820.
https://forum.xda-developers.com/oneplus-3/how-to/advanced-interactive-governor-tweaks-t3476589
#Notes
I have personally tested this ROM and currently using it as my daily driver. In the last one week I have had one screen freeze and no reboots at all. The "draw over screen issue is a bit of a pain but hey that's Marshmallow for you. Please see screenshot below
#Disclaimer
I do not own this ROM, all credits go to Xingrz & the Mokee team.
Contributors
Xingrz
ROM OS Version: 6.0.1 Marshmallow
Version Information 1.0
Status: Release.
Android security patch level: January 5, 2017
Last Updated 2017-02-03. Update is weekly
"Error 7 - Wrong Firmware."
gsurath said:
#Version 1.0 Features
- based on the latest CN_RSZOT1JF13L153;
- official camera app by Nubia;
- official IR remote app by Nubia.
#Bugs
Have not found any so far
#Download
https://download.mokeedev.com/?device=nx531j
#Prerequisites
- Nubia Z11;
- Last Package of Mokee ROM (MK60.1-nx531j-170203-RELEASE.zip)
- Open Gapps (arm64, 6.0, nano); Available at the download location
- TWRP installed. (I have used the modded TWRP for N531j which includes Root)
#Procedure
- copy ROM and Gapps .zip files on the phone;
- enter the recovery (press simultaneously power and volume- button)
- wipe data;
- install ROM from TWRP;
- install Gapps;
- reboot the device;
#Others
- I have also installed arm64 xposed and it is running fine. Download available at the same location mentioned above
Additionally I have installed the Advanced Kernel Tweaks from the Oneplus 3 forum for Qualcomm Snapdragon 820.
https://forum.xda-developers.com/oneplus-3/how-to/advanced-interactive-governor-tweaks-t3476589
#Notes
I have personally tested this ROM and currently using it as my daily driver. In the last one week I have had one screen freeze and no reboots at all. The "draw over screen issue is a bit of a pain but hey that's Marshmallow for you. Please see screenshot below
#Disclaimer
I do not own this ROM, all credits go to Xingrz & the Mokee team.
Contributors
Xingrz
ROM OS Version: 6.0.1 Marshmallow
Version Information 1.0
Status: Release.
Android security patch level: January 5, 2017
Last Updated 2017-02-03. Update is weekly
Click to expand...
Click to collapse
--------------------------------------------------------
Thanks for starting this discussion. I have a 6GB+64GB Black Gold version. I have rooted it and using Mokee rom and its amazing however I`m unable to upgrade to Nougat as I can`t flash 70. version of Mokee. It gives me "Error 7 - Wrong firmware."
I know it has something to do with phone not being recognized correctly. You have any idea how to fix that? I`d appreciate any help.
---------- Post added at 06:31 PM ---------- Previous post was at 06:30 PM ----------
Also it would be great if we can start an official Mokee Rom thread for our Z11 since it has official MOKEE support.
Since a few days the Nubia z11 aka NX531J has been disblaed in the build props of the Mokee 71.2 distribution.
Project: external/mokee/BuildController
• martincz - build-target: disable nx531j
The user martincz is founder of the Mokee distribution:
martincz (Martincz Gao) · GitHub
Has anybody any idea what are the reasons behind that and what is the future perspective for Mokee with that device?
On the Mokee Forum on g+ I haven't got any answers:
On the download website of mokee, the nightly from 2017-08-22 is as the last one still available.
Welcome to The OxygenKernel Thread for the Galaxy J3
Warning : Me nor XDA Are responsible for any damage that might be caused after flashing any file provided here. Please take caution and be aware of what you are doing. And Always backup !
-- Features --
[x]Init.d support
[x]Patches DM-Verity.
[x]Patches the system to fix WIFI and Bluetooth not turning on when using custom kernels.
[x]Fake Enforcing (Permissive and shows enforcing)
[x]Fake KNOX
[x]RMM-KnoxGuard Free
[x]Other improvments for Batterylife and performance
[x]Many ram improvments
[x]No sim breaking with 8.1 rooting
--How to install--
Boot in TWRP Recovery
Fully Wipe internal storage and format data (Must for first time flashing TWRP)
Copy Kernel to your desired Location
Install Image and select Boot.img. Install as Boot Image.
Reboot and wait
--Basic Info --
This kernel is mainly for users who want more than just root, As permissive allows for more flexibility with some of the mods found on xda, and it is customizable to get the most out of your device. You are free to use this kernel in any future rom aslong as you Link this thread
-- Credits --
@BlackMesa123
@topjonhuw For Magisk
asysh
Download <> More info In second Post
XDAevDB Information
OxygenKernel for the Samsung Galaxy J3
Contributors
ME
Version Information
Status: Stable
Current Stable Version: V1
Stable Release Date: 05.06.2019
Created 05.06.2019
Last Updated 05.06.2019
Downloads
Downloads:
OxygenKernel V1
Download :
Mega:https://mega.nz/#!2fZGHASQ!nzZyAGv3_0SGx8qDJTdjBwGP4IZtLfTbmqOISgtB0HM
link dead
ExtremeGrief said:
Downloads
Downloads:
OxygenKernel V1
Download :
Mega:https://mega.nz/#!2fZGHASQ!nzZyAGv3_0SGx8qDJTdjBwGP4IZtLfTbmqOISgtB0HM
Click to expand...
Click to collapse
link dead
Hello,im recently find this Awesome Dotos from this Thread by TryHarddood
https://tryharddood.github.io/hermes-mirrors/index.html?releaseId=5897305#/releases
so why you dont try out this rom?maybe others can rebuild for a super stable version?
Code:
/*
*
* Your warranty is now void.
* We are not responsible for anything that may happen to your phone by installing any custom ROMs and/or kernels.
* You do it at your own risk and take the responsibility upon yourself and you are not to blame us or XDA and its respected developers.
*
*/
"This is a user friendly thread, all your suggestions are important to us and will be taken into consideration.."
dotOS is an Android Rom which focuses on performance and stability. Our aim is to enable a user to extract as much juice as possible and get most out of his/her device.
Initially started by Mohan CM and later joined by Ganesh, Sam, Kuber, Iacob and Hari. Together we stand strong.
Stability and Performance
Lagfree with High Performance Results
Clutterless UI
Perfect Interface for every User
Enhanced default apps
Redesigned settings and QS panel
Full OMS support
Colour Engine Support
CLEAN FLASH :
Download the latest build and GApps
Reboot to recovery
Make NAndroid backup (Not Necessary)
Wipe System, Data, Cache , Dalvik
Flash the latest build and GApps
Reboot
DIRTY FLASH :
Download the latest build
Reboot to recovery
Flash the latest build
Wipe Cache
+Reboot
+The ROM has GApps persistence in between dirty flashes, so you only have to flash them once!
+The root solution should be flashed together with every OTA update (= ROM Update) as long as the instructions of your
+root solution do not state something else (="persistence on dirty flashing") !
Download ROM:
https://github.com/TryHardDood/herm...mes/DOT-N-v1.2-20180913-hermes-UNOFFICIAL.zip
LineageOS 14.1 tree
Works
Adjustable brightness
Audio
Auto brightness
MTP and Mass Storage modes
Vibration
Rotation
RIL
Video
Gallery
Mic
Wi-Fi
Bluetooth
Internet
GPS
Hotspot
Camera rear/front
SD Card
IR Blaster
Not Working
Video Recording
Credits
@Dinolek for his source tree and helping me fix adb on pie(don't worry I have already took his permission before)
@Smosia for his new hennessy tree and his fixes
@nofearnohappy
@jianminglok
@danielpinto8zz6
@andrea2107
@l7ssha
@Syl157
@danielhk (for his updated gps hal)
@ibilux (for his help to fix the bugs)
..
Download Gapps:
Note : Pico Gapps are recommended. - arm -7.1-pico
OpenGApps
Source Code: https://github.com/DotOS
ROM OS Version: 7.1.2 Nougat
ROM Kernel: Unknown
ROM Firmware Required: latest TWRP recovery
Based On: LineageOS
Version Information
Status: Unknown
Current stable Version: v1.2 final
Stable Release Date: Unknown
Created Unknown
Last Updated Unknown
rom chạy rất nhanh và chỉ có lỗi về máy ảnh
████████╗██╗░░░██╗██████╗░██████╗░░█████╗░██████╗░░█████╗░██████╗░████████╗░░░░░░░█████╗░███████╗ ██╗░░░██╗░░███╗░░
╚══██╔══╝██║░░░██║██╔══██╗██╔══██╗██╔══██╗██╔══██╗██╔══██╗██╔══██╗╚══██╔══╝░░░░░░██╔══██╗╚════██║ ██║░░░██║░████║░░
░░░██║░░░██║░░░██║██████╔╝██████╦╝██║░░██║██████╔╝██║░░██║██████╔╝░░░██║░░░█████╗███████║░░░░██╔╝ ╚██╗░██╔╝██╔██║░░
░░░██║░░░██║░░░██║██╔══██╗██╔══██╗██║░░██║██╔═══╝░██║░░██║██╔══██╗░░░██║░░░╚════╝██╔══██║░░░██╔╝░ ░╚████╔╝░╚═╝██║░░
░░░██║░░░╚██████╔╝██║░░██║██████╦╝╚█████╔╝██║░░░░░╚█████╔╝██║░░██║░░░██║░░░░░░░░░██║░░██║░░██╔╝░░ ░░╚██╔╝░░███████╗
░░░╚═╝░░░░╚═════╝░╚═╝░░╚═╝╚═════╝░░╚════╝░╚═╝░░░░░░╚════╝░╚═╝░░╚═╝░░░╚═╝░░░░░░░░░╚═╝░░╚═╝░░╚═╝░░░ ░░░╚═╝░░░╚══════╝
BEFORE CONTINUING READING, HIT THANKS BUTTON! A LOT OF EFFORT HAS GONE INTO THIS.
READ COMPLETE POST FOR THE BEST EXPERIENCE WITH THIS ROM.
As usual, I am not responsible for damage to your device, you, the user is choosing to make these modifications.
Your device's warranty is VOID if this procedure is followed, Proceed at your own caution!
I would like to thank my mentor Augustin94 & @neel0210 for providing me the timely guidance, immense support and fixes, tools to make this ROM possible.
@prashantp01 for suggesting this Port.
My friend in this endeavor @el0xren for his fixes and mods.
Myself for bringing you this A7 Port ROM for the M30 & Samsung for their sources .
This is the FIRST OneUI 2.0 [not core] full system port from the Samsung Galaxy A7 to Samsung Galaxy M30.
THIS ROM PACKAGE HAS A NEW KERNEL WITH UNDERCLOCK TO INCREASE STANDBY EFFICIENCY!
LITTLE cluster (6x A53 Cores) underclocked from 449MHz to 343MHz.
big cluster (2x A73 Cores) underclocked from 936MHz to 728MHz.
I advice users to enable reduced animations for a fluid experience.
To do this simply go to settings->Advanced Features->Reduce animations, turn this ON.
Goodlock has been tested working on this A7 PortROM .
Based on: A750FNXXU4CTG2 AP Uzbekistan latest July 2020 security patch
Base Firmware: M305FDDU5CTF2 Base Firmware (BL & CP)
Reported to be working with firmware w/ following details
Device: Samsung Galaxy M30 SM-M305[F] / SM-M305[M]
BL: M305FDDU5CTF2
CP: M305FDDU5CTF1
CSC: HOME_CSC_OMC_ODM_M305FODM5CTF2
Patch: 1st May 2020
Build Date: 8th August 2020
Android Version: 10
One UI Version : 2.0
========================================================
INSTALLATION PROCEDURE:
========================================================
If you're coming from TurboROM or other custom ROM apart from stock skip to step "c", assuming you have BL unlocked and the latest TWRP installed.
a.Make sure bootloader unlocked and the Odin Download mode splash screen displays KG State:checking and OEM LOCK: OFF.
b.Get the latest TWRP stable over here https://forum.xda-developers.com/galaxy-m30/development/recovery-twrp-3-4-0-0-recovery-t4131667
c.Get ROM zip (See downloads at end of post).
e.Boot into TWRP and Wipe Data, Cache, Dalvik Cache.
f.Place the single ROM zip you downloaded on MicroSDCard as you will be Formatting Data later.
g.Install A7 Port ROM zip file, read on screen instructions.
h.After installing, format data in Wipe->Format Data->yes, if you want to keep internal storage data don't do this.
k.No need to flash any other zip, this is a standalone ROM zip.
l.Reboot into system.
Device will take some time to install and bootup, wait patiently.
In the mean time read over the features listed below.
A7 Port Version 1
========================================================
ROM FEATURES:
========================================================
1.Stock A7 System FULL port, ALL ONEUI 2.0 Features.
2.Minor debloating performed.
3.1st July 2020 Security Patch.
Feel free to report bugs, & give suggestions below.
If you want to donate, message me on Telegram @cha0scl0wn.
HIT THANKS IF YOU LIKED OUR WORK.
========================================================
DOWNLOADS
========================================================
1.ROM : Google Drive
2.ROM : NextCloud
NextCloud Link Courtesy : vdbhb59 thanks buddy!
XDA:DevDB Information
[ROM][10][OneUI-2.0] TurboPort A7 v1 [m30lte], ROM for the Samsung Galaxy M30
Contributors
Akhil99, neel0210
Source Code: https://github.com/akhil1999/android_kernel_samsung_m30lte
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
ROM Firmware Required: M305FDDU5CTF2
Based On: OneUI
Version Information
Status: Stable
Current Stable Version: v1
Stable Release Date: 2020-08-09
Created 2020-08-09
Last Updated 2020-08-22
Reserved
Reserved
Nice port bro
Akhil99 said:
████████╗██╗░░░██╗██████╗░██████╗░░█████╗░██████╗░░█████╗░██████╗░████████╗░░░░░░░█████╗░███████╗ ██╗░░░██╗░░███╗░░
╚══██╔══╝██║░░░██║██╔══██╗██╔══██╗██╔══██╗██╔══██╗██╔══██╗██╔══██╗╚══██╔══╝░░░░░░██╔══██╗╚════██║ ██║░░░██║░████║░░
░░░██║░░░██║░░░██║██████╔╝██████╦╝██║░░██║██████╔╝██║░░██║██████╔╝░░░██║░░░█████╗███████║░░░░██╔╝ ╚██╗░██╔╝██╔██║░░
░░░██║░░░██║░░░██║██╔══██╗██╔══██╗██║░░██║██╔═══╝░██║░░██║██╔══██╗░░░██║░░░╚════╝██╔══██║░░░██╔╝░ ░╚████╔╝░╚═╝██║░░
░░░██║░░░╚██████╔╝██║░░██║██████╦╝╚█████╔╝██║░░░░░╚█████╔╝██║░░██║░░░██║░░░░░░░░░██║░░██║░░██╔╝░░ ░░╚██╔╝░░███████╗
░░░╚═╝░░░░╚═════╝░╚═╝░░╚═╝╚═════╝░░╚════╝░╚═╝░░░░░░╚════╝░╚═╝░░╚═╝░░░╚═╝░░░░░░░░░╚═╝░░╚═╝░░╚═╝░░░ ░░░╚═╝░░░╚══════╝
BEFORE CONTINUING READING, HIT THANKS BUTTON! A LOT OF EFFORT HAS GONE INTO THIS.
READ COMPLETE POST FOR THE BEST EXPERIENCE WITH THIS ROM.
As usual, I am not responsible for damage to your device, you, the user is choosing to make these modifications.
Your device's warranty is VOID if this procedure is followed, Proceed at your own caution!
I would like to thank my mentor Augustin94 & @neel0210 for providing me the timely guidance, immense support and fixes, tools to make this ROM possible.
@prashantp01 for suggesting this Port.
My friend in this endeavor @el0xren for his fixes and mods.
Myself for bringing you this A7 Port ROM for the M30.
This is the FIRST OneUI 2.0 [not core] full system port from the Samsung Galaxy A7 to Samsung Galaxy M30.
THIS ROM PACKAGE HAS A NEW KERNEL WITH UNDERCLOCK TO INCREASE STANDBY EFFICIENCY!LITTLE cluster (6x A53 Cores) underclocked from 449MHz to 343MHz.
big cluster (2x A73 Cores) underclocked from 936MHz to 728MHz.
I advice users to enable reduced animations for a fluid experience.
To do this simply go to settings->Advanced Features->Reduce animations, turn this ON.
Goodlock has been tested working on this A7 PortROM .
Based on: A750FNXXU4CTG2 AP Uzbekistan latest July 2020 security patch
Base Firmware: M305FDDU5CTF2 Base Firmware (BL & CP)
Reported to be working with firmware w/ following details
Device: Samsung Galaxy M30 SM-M305[F] / SM-M305[M]
BL: M305FDDU5CTF2
CP: M305FDDU5CTF1
CSC: HOME_CSC_OMC_ODM_M305FODM5CTF2
Patch: 1st May 2020
Build Date: 8th August 2020
Android Version: 10
One UI Version : 2.0
========================================================
INSTALLATION PROCEDURE:
========================================================
If you're coming from TurboROM or other custom ROM apart from stock skip to step "c", assuming you have BL unlocked and the latest TWRP installed.
a.Make sure bootloader unlocked and the Odin Download mode splash screen displays KG State:checking and OEM LOCK: OFF.
b.Get the latest TWRP stable over here https://forum.xda-developers.com/galaxy-m30/development/recovery-twrp-3-4-0-0-recovery-t4131667
c.Get ROM zip (See downloads at end of post).
e.Boot into TWRP and Wipe Data, Cache, Dalvik Cache.
f.Place the single ROM zip you downloaded on MicroSDCard as you will be Formatting Data later.
g.Install A7 Port ROM zip file, read on screen instructions.
h.After installing, format data in Wipe->Format Data->yes, if you want to keep internal storage data don't do this.
k.No need to flash any other zip, this is a standalone ROM zip.
l.Reboot into system.
Device will take some time to install and bootup, wait patiently.
In the mean time read over the features listed below.
A7 Port Version 1
==================================================
ROM FEATURES:
==================================================
1.Stock A7 System FULL port, ALL ONEUI 2.0 Features.
2.Minor debloating performed.
3.1st July 2020 Security Patch.
Feel free to report bugs, & give suggestions below.
If you want to donate, message me on Telegram @cha0scl0wn.
HIT THANKS IF YOU LIKED OUR WORK.
==================================================
DOWNLOADS
==================================================
1.ROM : Google Drive
XDA:DevDB Information
[ROM][10][OneUI-2.0] TurboPort A7 v1 [m30lte], ROM for the Samsung Galaxy M30
Contributors
Akhil99, neel0210
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
ROM Firmware Required: M305FDDU5CTF2
Based On: OneUI
Version Information
Status: Stable
Current Stable Version: v1
Stable Release Date: 2020-08-09
Created 2020-08-09
Last Updated 2020-08-09
Click to expand...
Click to collapse
People are glad to have dev like you
wow one ui full version, goodlock can be used yay!
neel0210 said:
People are glad to have dev like you
Click to expand...
Click to collapse
I am glad I have a mentor like you
good job, mate!
Quick Question:
Do I not need to wipe system or vendor?
I'm currently on latest firmware with TWRP, root and Magisk installed. Will it be fine to flash this zip?
Azamsm said:
Quick Question:
Do I not need to wipe system or vendor?
I'm currently on latest firmware with TWRP, root and Magisk installed. Will it be fine to flash this zip?
Click to expand...
Click to collapse
You can flash normally, but userrdata wipe is needed.
Thx
---------- Post added at 02:31 PM ---------- Previous post was at 02:25 PM ----------
vdbhb59 said:
You can flash normally, but userrdata wipe is needed.
Click to expand...
Click to collapse
Have you tried it, sir?
Thanks a lot bro!!!!!
MiyamuraNEET said:
Thanks a lot bro!!!!!
Click to expand...
Click to collapse
welcome bruv
el0xren said:
good job, mate!
Click to expand...
Click to collapse
ayyy bruv! looking forward to infinity OS for m30
Azamsm said:
Thx
---------- Post added at 02:31 PM ---------- Previous post was at 02:25 PM ----------
Have you tried it, sir?
Click to expand...
Click to collapse
You are welcome mate. Tried, yup. It works. Just be sure to follow steps, as Samsung and tripping Knox is very mutual..
Akhil99 said:
ayyy bruv! looking forward to infinity OS for m30
Click to expand...
Click to collapse
Nah people love your roms on m30!
vdbhb59 said:
You are welcome mate. Tried, yup. It works. Just be sure to follow steps, as Samsung and tripping Knox is very mutual..
Click to expand...
Click to collapse
Two more questions:
How do I check KG State checking?
Is build number the firmware version?
Thanks a lot for your help!
Great one!
Sir, please develop a rom on m30 port with all the flagship features like edge lighting, single take. And also add one ui 2.1 features on that rom. And hope that we will see a new powerful kernel on that rom for best possible gaming experience.
Azamsm said:
Two more questions:
How do I check KG State checking?
Is build number the firmware version?
Thanks a lot for your help!
Click to expand...
Click to collapse
KG state checking or prenormal is when 7 days of network provider lock is not over/complete yet. I bypassed this only during the initial setup, where I took SIM off initially and then while setting up, made sure my date and time was 14 days earlier to that current date. Then after that I reinserted SIM and continued the rest of the setup. After that I ensured, my SIM was ON for 45-60 minutes, before I rebooted or powered off. This allowed for me to install patched or unofficial binaries.
The build number usually is not the FW no, but forms a part of the software and firmware version.
My device became significantly slower after this ROM. Is it because of the underclock? If so how can I revert back to the stock frequencies?
uzair.ak5 said:
My device became significantly slower after this ROM. Is it because of the underclock? If so how can I revert back to the stock frequencies?
Click to expand...
Click to collapse
Flash properly, using the above instructions. All users reported thier devices to be faster on this ROM compared to others. Wipe Data and start fresh!