Hi I extracted the Stock files on windows via Verizon Emergency Software Recovery Utility. Where do I upload them?
Thank you!
Scott
(Newbie):fingers-crossed:
Related
Hi,
I have the Galaxy Note 4 & S6 and I have problem with installing TWRP via Odin.
The Odin software doesn't recognize the Tar file as Tar file, but as IMG file and I can't select it.
How to fix thaht?
Thanks.
Lot of confusion please help i want to go back to stock for my gear VR
According to
this thread where i posted photos of my phones INFO
I downloaded N910F( UK BTU) 6.0.1 firmware (.ZIP) file
When i tried to flash using TWRP it says ZIP file is corrupted.
I downloaded it from two website
sammobile
and
samsung.org
both are corrupted(it should not be i think)
When i look into it it has only one file .tar.md5
i tried to extarct it using winrar and it says file is corrpted
\BTU-N910FXXS1DQFA-20170726090446.zip: The archive is corrupt
Although it extracted the N910FXXS1DQFA_N910FBTU1DPL1_N910FXXS1DQA1_HOME.tar.md5
In both files i got the same result same
i dont know what to do now
I tried Odin and it stuck at "there is no pit file partition" or something like that
(yes i wiped out cache and system delvik etc.)
I also tried inserting PIT file but no luck
i would prefer without Odin if possible
As I can go into TWRP recovery
Please guide me or at least answer a few question
1. Is it even possible to flash stock rom using twrp like i flash other roms?
2. Can i install extracted .md5 file from that zip? will it be the same like stock zip?
3. Why my Both zip files are corrpted? your opinion?
4. Should i download again same stock rom?
5. Can / Should i flash or download and /or downgrade Stock firmware (same 6.0.1 )but different release date?
6. Am i downloading the right firmware for my device here is my device details posted??
Lot of confusion please help i want to go back to stock for my gear VR
Based on the amount and type of questions, I believe you need to read up on basic Note 4 flashing/customization knowledge first. Go and read up on the stickies.
Without knowledge and experience, we can tell you how to do a brain surgery, but doesn't make you a surgeon.
No, twrp cannot be used to flash stock rom. Stock rom are most of the time md5 files, used by ODIN only.
Since you downloaded the zip files, use the "Test" function to see if it is corrupted?
Maybe you should just flash a stock based custom rom with VR and be done with it.
https://forum.xda-developers.com/no...om-bob4-devbase-multi-csc-safe-bloat-t3033881
---------- Post added at 01:13 PM ---------- Previous post was at 01:05 PM ----------
Oh, according to your screen shots, DBT is in a carrier in Germany?
I installed BTU (UK) stock rom and it is is working fine (using odin)
nicholes said:
Lot of confusion please help i want to go back to stock for my gear VR
According to
this thread where i posted photos of my phones INFO
I downloaded N910F( UK BTU) 6.0.1 firmware (.ZIP) file
When i tried to flash using TWRP it says ZIP file is corrupted.
I downloaded it from two website
sammobile
and
samsung.org
both are corrupted(it should not be i think)
==================================================
Check your Winzip version. It may be old and doesnt handle large zipfiles too well. I had the same problem but I know the file was good as I downloaded it at work, and Winzip worked just fine; but when I got home, winzip failed on my pc - old 8.1 version. I used the trial version just fine to unzip.
Click to expand...
Click to collapse
Flashing Rom
"I downloaded N910F( UK BTU) 6.0.1 firmware (.ZIP) file
When i tried to flash using TWRP it says ZIP file is corrupted.
I downloaded it from two website "
Did you keep the ROM as a Zip file when you loaded it in to Odin?
Do not unzip the ROM file.
Try again.
Fool2242 said:
"I downloaded N910F( UK BTU) 6.0.1 firmware (.ZIP) file
When i tried to flash using TWRP it says ZIP file is corrupted.
I downloaded it from two website "
Did you keep the ROM as a Zip file when you loaded it in to Odin?
Do not unzip the ROM file.
Try again.
Click to expand...
Click to collapse
As far as I remember it was zip file
Hello friends I have download stock firmware s061 which named with "Kraft-A6000_S061_160727_WCB0C57CA0.zip" .. But I don't understand what should I do now ? Please anybody help me how can i flash this file via qpst tool ....
Extract the zip file. Copy system. Zip file and India Ota file into your SD card. Then install through TWRP with usual procedure ie wipe etc
Sam Ruxx said:
Hello friends I have download stock firmware s061 which named with "Kraft-A6000_S061_160727_WCB0C57CA0.zip" .. But I don't understand what should I do now ? Please anybody help me how can i flash this file via qpst tool ....
Click to expand...
Click to collapse
You have to download the Firmware, Lenovo Drivers and the Qualcom Flash Tool. You can download them all from the link below.
Note that instructions are already included.
Code:
http://www.mediafire.com/file/dhwu78g9llbv133/Lenovo_A6000_S062_Q102113_20161223.zip
Let me know if you are having any trouble.
This is the latest OTA Update for all major carriers. THIS WILL UPDATE YOUR BOOTLOADER SO THERE IS NO GOING BACK! I'm downloading, uploading to my Google Drive and posting this here as reference.
And of course, after flashing this in Odin you can go to https://samsung.firmware.science and chose QK5 to whichever Oreo Beta is latest or you can enjoy having the latest flashable update.
LINK: https://drive.google.com/open?id=1x9-mYPbDKgsa4sS0bMdu9yfmczZywqM_
Uploaded. I already removed the .md5 off the end of the files, just extract and flash away
How do you go about flashing this? Flashing my S5 there was only one file and you loaded that into the AP slot in Odin. With the S8 software it looks like there are 5 separate files. Do you only flash the AP file or all of them? Also, I tried another firmware that was supposed to be Verizon firmwareand had some cricket and metropcs apps installed. Will this be the Verizon firmware that came with the phone from the factory or is it like the other firmware I downloaded and installed from Sammobile? Thanks for any help on this. Trying to get my phone back to how it was when I took it out of the box.
Hitchhiker90 said:
How do you go about flashing this? Flashing my S5 there was only one file and you loaded that into the AP slot in Odin. With the S8 software it looks like there are 5 separate files. Do you only flash the AP file or all of them? Also, I tried another firmware that was supposed to be Verizon firmwareand had some cricket and metropcs apps installed. Will this be the Verizon firmware that came with the phone from the factory or is it like the other firmware I downloaded and installed from Sammobile? Thanks for any help on this. Trying to get my phone back to how it was when I took it out of the box.
Click to expand...
Click to collapse
I Extracted and flashed AP, BL, CP and CSC. Verizon firmware.
The link you posted is dead. Have any other mirrors possibly?
Hey I'm on a custom rom for my Galaxy S7 which is originally an AT&T variant however I've had many different firmwares on here. I'm trying to go back to AT&T and the firmware file I'm finding on here is a 7z file. I tried extracting it and even removing the .rar from the end however PrinceComsey Odin doesn't process is farthest it gets is file analysis. Are these just bad files? Am I using the wrong Odin? Am I extracting it wrong? Are there other requirements? I can follow directions just fine and usually it's pretty simple