[DETAILED][GUIDE] Flash Recovery + ROM to Samsung Galaxy S6 [LineageOS][G920F][TWRP] - Galaxy S6 General

[DETAILED][GUIDE] Flash Recovery + ROM to Samsung Galaxy S6 [LineageOS][G920F][TWRP]
Good Day Fam,
This is a detailed guide for absolute beginners rooting their Samsung Galaxy S6 (G920F) for the first time. It includes loading a system recovery (TWRP) and flashing a custom rom (LineageOS 14.1). This same method has been used personally on three different Samsung phones (S4 mini, S5, S6) with no problems or bricking. In this example official LineageOS 14.1 (ROM) will be used. Why LineageOS? Its stable, has good support and is lightweight (well optimised). Over the dozens of roms flashed generally LineageOS comes on top.
I had links for all the downloads but xda won't let me post them due to not enough posts. All except for the drivers and odin are on LineageOS's website.
DOWNLOADS:
Lineage OS 14.1 of your phone:download.lineageos.org/zerofltexx
"lineage-14.1-201xxxxx-nightly-zerofltexx-signed.zip"
TWRP (System Recovery TeamWin) got from:twrp.me/Devices/Samsung/
"twrp-3.2.3-0-zeroflte.img"
Gapps (S6 = ARM64, Lineage 14.1 = 7.1, I chose nano for you)pengapps.org/?api=7.1&variant=nano
"open_gapps-arm64-7.1-nano-20180928.zip"
Odin (what we use to get TWRP on phone, also doesn't matter which version they all work)dindownload.com/download/#.W62aymgzaUk
"Odin3_v3.12.3.zip"
Driver (not always needed):developer.samsung.com/galaxy/others/android-usb-driver-for-windows
"SAMSUNG_USB_Driver_for_Mobile_Phones.zip"
INSTRUCTIONS:
Load TWRP on phone using Odin (it involves usb cable, phone in download mode, and sometimes you need to donwload samsung driver software if odin doesn't pick up phone).
Reboot phone in Recovery mode (TWRP mode) and back up whole phone on a flash/micro sd/OTG card.
In recovery mode format (need to type "yes") and wipe it (system+cache)
Copy DOWNLOAD 1 and 3 zipped folders on a micro sd card (LineageOS and Gapps)
Put sd card in phone and start phone in recovery mode.
Navigate to and install "lineage-.....zip" with the reboot after completion unchecked and then "open_gapps....zip" with the reboot after completion checked
And NOW your phone will reboot with hot new bloatware free OS
And you still have copy of your old phone on a flash somewhere.
EXTRA:
The only folders you unzip is the folders that need to be installed on pc: odin + drivers (the rest need to stay ziped
Download mode: volume down + home + power
Recovery mode: volume up + home + power
Odin's set up has to be perfect before you push start look it up. This is the most crucial part of the process as you can brick your phone here if not done right
NakedKingRSA signing out...

But a Samsung S6 has no SD card??
Sent from my iPhone using Tapatalk Pro

nakedkingrsa said:
[DETAILED][GUIDE] Flash Recovery + ROM to Samsung Galaxy S6 [LineageOS][G920F][TWRP]
Good Day Fam,
This is a detailed guide for absolute beginners rooting their Samsung Galaxy S6 (G920F) for the first time. It includes loading a system recovery (TWRP) and flashing a custom rom (LineageOS 14.1). This same method has been used personally on three different Samsung phones (S4 mini, S5, S6) with no problems or bricking. In this example official LineageOS 14.1 (ROM) will be used. Why LineageOS? Its stable, has good support and is lightweight (well optimised). Over the dozens of roms flashed generally LineageOS comes on top.
I had links for all the downloads but xda won't let me post them due to not enough posts. All except for the drivers and odin are on LineageOS's website.
DOWNLOADS:
Lineage OS 14.1 of your phone:download.lineageos.org/zerofltexx
"lineage-14.1-201xxxxx-nightly-zerofltexx-signed.zip"
TWRP (System Recovery TeamWin) got from:twrp.me/Devices/Samsung/
"twrp-3.2.3-0-zeroflte.img"
Gapps (S6 = ARM64, Lineage 14.1 = 7.1, I chose nano for you)pengapps.org/?api=7.1&variant=nano
"open_gapps-arm64-7.1-nano-20180928.zip"
Odin (what we use to get TWRP on phone, also doesn't matter which version they all work)dindownload.com/download/#.W62aymgzaUk
"Odin3_v3.12.3.zip"
Driver (not always needed):developer.samsung.com/galaxy/others/android-usb-driver-for-windows
"SAMSUNG_USB_Driver_for_Mobile_Phones.zip"
INSTRUCTIONS:
Load TWRP on phone using Odin (it involves usb cable, phone in download mode, and sometimes you need to donwload samsung driver software if odin doesn't pick up phone).
Reboot phone in Recovery mode (TWRP mode) and back up whole phone on a flash/micro sd/OTG card.
In recovery mode format (need to type "yes") and wipe it (system+cache)
Copy DOWNLOAD 1 and 3 zipped folders on a micro sd card (LineageOS and Gapps)
Put sd card in phone and start phone in recovery mode.
Navigate to and install "lineage-.....zip" with the reboot after completion unchecked and then "open_gapps....zip" with the reboot after completion checked
And NOW your phone will reboot with hot new bloatware free OS
And you still have copy of your old phone on a flash somewhere.
EXTRA:
The only folders you unzip is the folders that need to be installed on pc: odin + drivers (the rest need to stay ziped
Recovery mode: volume up + home + power
Odin's set up has to be perfect before you push start look it up. This is the most crucial part of the process as you can brick your phone here if not done right
NakedKingRSA signing out...
Click to expand...
Click to collapse
Is it still working...??

Related

[Complete Guide] SHIELD Tablet K1 Root, Custom Rom and Xposed Framework

Hello Guys,
At first a little background story:
I bought the Tablet 3 Month ago. I have got the Update to Android 6.0 in January and unfortunately, I applied it.
So If you don't want to apply a custom rom do not update to 6.0, because 5.1.1 is much better.
I am not responsible if anything goes wrong.
Ok, so let's get started:
At first you must install Minimal ADB and Fastboot on your PC/Laptop/Mac.
Windows: https://forum.xda-developers.com/showthread.php?t=2588979
Linux/Mac: http://rootmygalaxy.net/install-adb-and-fastboot-on-mac-or-linux/
Here is the link for all OSs: http://lifehacker.com/the-easiest-way-to-install-androids-adb-and-fastboot-to-1586992378
Before you can Root or flash a Custom Rom you must flash the recovery:
You will need:
-Nvidia Family Drivers(Extract it in a folder of your choice): http://nvidiashieldzone.com/files/shieldtv/shieldfamilydriver.zip not working anymore, official link:
http://developer.download.nvidia.com/mobile/shield/SHIELD_Family_WHQL_USB_driver_201801.zip
-As many of you are experiencing problems with my previously mentioned TWRP 2.8.7.3 version I am replacing the link with the official TWRP Shield Tablet Download Site. Just take the newest stable version: https://dl.twrp.me/shieldtablet/ (Put the file into the ADB+Fastboot Folder)
-TWRP 2.8.7.3 Recovery(Put the file into the ADB+Fastboot Folder): Download URL: https://www.androidfilehost.com/?fid=24269982087009777
Developer Post: http://forum.xda-developers.com/shi...recovery-twrp-2-8-7-0-touch-recovery-t3257172
Install the Drivers
Connect your Tablet to your PC
Windows:
Open your Device Manager
If there Is a device with a yellow ! klick on it and update the Drivers Manually(select the Folder where you extracted the Family Divers)
Linux:
You don't need any drivers
(For every fastboot command in ADB+Fastboot you will need a "sudo" in front of it...)
Mac:
You also don't need any drivers
(For every fastboot command in ADB+Fastboot you will need a "./" in front of it...)
Flash Recovery
1. Open Minimal ADB and Fastboot
2. Type in
Code:
adb devices
if you get a long term of numbers and letters your drivers are correctly installed, If this command does not bring up a device, check your cable connection and/or update your drivers again.
3. Now you must enable developer options on your SHIELD Tablet K1
3.1 Go to your Setting, scroll all the way down and choose Info(or similar)
3.2 Tap seven times on the Build Number
3.3 Now go back and now there is a new menu point Developer Options
3.4 Open them and Enable USB Debugging
4. Now type
Code:
adb reboot bootloader
EDIT: 4.1 To enable the fastboot protocol, you must select "Fastboot mode" on the Tablet. After that type
Code:
fastboot devices
in order to check if fastboot is enabled.
5. Before you can do anything you must unlock the Bootloader
5.1 Type in
Code:
fastboot oem unlock
5.2 Follow the Instructions on the Terminal(On your tablet: press the volume down button and then the power button)
6. Now you are ready to flash the recovery
6.1 Type in
Code:
fastboot flash recovery twrp-x.x.x-x-shieldtablet.img
6.2 Wait until it is finished then navigate with the volume buttons through the Menu on your Tablet and choose the option recovery mod with you power button
7. You are now in a custom Recovery on this point you must decide what you want to do:
-Do you only want to root your Device
-Or do you want to install a custom rom
Custom Rom
If you want to be on the safe side you should consider wiping the /data partition (Troubleshoot section at the end of the Post)
1. You can access your tablet from your PC
2. Now move your Custom rom to your internal or SD Card Storage
2.1 Download your custom rom of your choice.
2.1.1 Cyanogenmod 12.1 (Android 5.1.1) and BlissPop v4.0.3 https://www.androidfilehost.com/?w=files&flid=150249
2.1.2 Cyanogenmod 13.0 (Android 6.0) https://androidfilehost.com/?w=files&flid=27600&sort_by=date&sort_dir=DESC
2.1.3 Nvidia Shield Tablet Resurrection ROM (Android 6.x) https://androidfilehost.com/?w=files&flid=60681&sort_by=date&sort_dir=DESC
2.1.4 BlissPop
2.2 Download Google Apps (Gapps) (ARM Device)
2.2.1 Android 5.1 http://opengapps.org/?api=5.1&variant=stock
2.2.2 Android 6.0 http://opengapps.org/?api=6.0&variant=nano
2.3 Download Nvidia Apps (You still need to install Nvidia Shield HUB from the Play Store)http://forum.xda-developers.com/shield-tablet/development/shield-apps-cyanogenmod-12-t3070116
3. In TWRP click on Backup and Swipe to Back Up
3.1 Now go to Wipe. For a dirty flash you will only need to wipe the Dalvik and Cache for a full wipe select Dalvik, System, Data, Cache
4. After it has finished Click on Install and choose the .zip of your Custom Rom
4.1 To install the Google Apps click on Add More Zips and select the GApps zip
4.2 And again click on Add More Zips and select nvsystemservices.zip
4.3 now you can Swipe to Confirm Flash
Root
Download the Latest Stabel SuperSU file: http://download.chainfire.eu/supersu-stable and copy it to the internal or SD Card Storage
For Android 7.0 (Nougat) the SuperSU r4 2.78 version is confirmed working.
1. Open Minimal ADB and Fastboot
2. Type in
Code:
adb reboot recovery
to enter the recovery mode
3. In TWRP click on Backup and Swipe to Back Up
4. After it has finished Click on Install and choose the UPDATE-SuperSU-v2.65-20151226141550.zip (or similar) and Swipe to Confirm Flash
5. Restart you Tablet and now a new App SuperSU is Installed
Xposed Framework
Download the Xposed Framework Zip file, take the newest version:
(The Shield Quad Core has a 32 bit arm architecture, so you need the framework for arm)
SDK21 for Android 5.0: http://dl-xda.xposed.info/framework/sdk21/arm/
SDK22 for Android 5.1: http://dl-xda.xposed.info/framework/sdk22/arm/
SDK23 for Android 6.0: http://dl-xda.xposed.info/framework/sdk23/arm/
and the apk: https://forum.xda-developers.com/attachment.php?attachmentid=3921508&d=1477916609
and move them to you Tablet.
Developer Thread (for the uninstaller): https://forum.xda-developers.com/showthread.php?t=3034811
Go to Recovery with Root
1. Now that you have root you don't need you PC anymore. Go to the Play store and download Quick Boot
2. Open Quick Boot and klick on Recovery
3. Allow Root rights and the Tablet should boot into recovery
Go to Recovery without Root
1. Shut down your Tablet
2. Press and hold the Vol down button and the Power button until the Bootloader screen appears
3. Navigate with the volume buttons through the Menu on your Tablet and choose the option recovery mod with you power button
Install Xposed Framework
1. In the TWRP Recovery (Optionally you can make a Backup) select Install and choose the xposed-v80-sdk22-arm.zip file
2. When you get an Error let me know
3. Now Restart you Tablet and install the .apk file normally
4. In the App Press Framework and now there should be a green writing saying: Xposed Framework version 80 is active
5. Here is a list of very useful programs for the Xposed Framework: http://forum.xda-developers.com/android/general/best-xposed-modules-android-t3103027
Please Leave a post if you are getting errors or something isn't clearly explained! And if I could help you, consider giving me a Thanks
Troubleshoot
If you are stuck in a Bootloop:
Without data loss(e.g. when you installed Xposed framework zip and its stuck in a bootloop)
1. flash the stock rom boot image BUT ONLY IF YOU DONT USE A CUSTOM ROM (it will probably loose root). go to https://developer.nvidia.com/gameworksdownload#?search=SHIELD Tablet K1&tx=$additional,shield and download the latest NVIDIA SHIELD Tablet K1 Recovery OS Image
2. Unpack the zip file and flash it to your Tablet
Code:
fastboot flash boot boot.img
If something went wrong while flashing a custom rom (after that you will need to flash the custom/stock rom again)
wipe the /data partition. It could be encrypted from the previous rom. Be aware that you need to reinstall the rom, therefore loose all your data. Troubleshot guide by agentbob123
-Toby
Credits:
@xsquid mac support
@agentbob123 suggestion to mention to wipe the /data partition as a solution for being stuck in a bootloop
@champs777 suggested the newest TWRP
@grävling mentioned importance of waiting until the recovery flash is finished
Toby9 said:
Hello Guys,
At first a litte background story:
I bought the Tablet 3 Month ago. I have got the Update to Android 6.0 in January and unfortunately i applied it.
So If you don't want to apply a custom rom do not update to 6.0, because 5.1.1 is much better.
Ok, so let's get started:
I am not responsible if anything goes wrong.
At first you must install Minimal ADB and Fastboot on your PC/Laptop/Mac.
Here is the link for all OSs: http://lifehacker.com/the-easiest-way-to-install-androids-adb-and-fastboot-to-1586992378
Before you can Root or flash a Custom Rom you must flash the recovery:
You will need:
-Nvidia Family Drivers(Extract it in a folder of you choice): http://nvidiashieldzone.com/files/shieldtv/shieldfamilydriver.zip
-TWRP 2.8.7.3 Recovery(Put the file into the ADB+Fastboot Folder):
Download URL: https://www.androidfilehost.com/?fid=24269982087009777
Developer Post: http://forum.xda-developers.com/shi...recovery-twrp-2-8-7-0-touch-recovery-t3257172
Install the Drivers
Connect your Tablet to your PC
Windows:
Open your Device Manager
If there Is a device with a yellow ! klick on it and update the Drivers Manually(select the Folder where you extracted the Family Divers)
Linux:
You dont need any drivers
(For every fastboot command in ADB+Fastboot you will need a sudo in front of it...)
Mac:
2016/02/16 Please leave a post if you how to do this
1. Open Minimal ADB and Fastboot
2. Type in
Code:
adb devices
if you get a long term of numbers and letters your drivers are correctly installen, If this command does not bring up a device, check your cable connection and/or update your drivers again.
3. Now you must enable developer options on your SHIELD Tablet K1
3.1 Go to your Setting, scroll all the way down and choose Info(or similar)
3.2 Tap seven times on the Build Number
3.3 Now go back and now there is a new menu point Developer Options
3.4 Open them and Enable USB Debugging
4. Now type
Code:
adb reboot bootloader
5. Before you can do anyting you must unlock the Bootloader
5.1 Type in
Code:
fastboot oem unlock
5.2 Follow the Instructions on the Terminal(On your tablet: press the volume down button and then the power button)
6. No you are ready to flash the recovery
6.1 Type in
Code:
fastboot flash recovery twrp-2.8.7.3-shieldtablet.img
6.2 Wait until it is finished then move with the volume buttons through the Menu on your Tablet an choose the option recovery mod with you power button
7. You are now in a custom Recovery on this point you must decide what you want to do:
-Do you only want to root your Device
-Or do you want to install a cutom rom
Custom Rom
1. You can access your tablet on your pc
2. Now move your Custom rom to your internal or SD Card Storage
2.1 Download your custom rom of your choice. I decided to use Cyanogenmod 12.1 (Android 5.1.1) http://forum.xda-developers.com/shi...-cyanogenmod-12-shield-tablet-lte-na-t3055043
2.2 Download Google Apps (Gapps) (ARM Device) http://opengapps.org/?api=5.1&variant=stock
2.3 Download Nvidia Apps (You still need to install Nvidia Shield HUB from the Play Store)http://forum.xda-developers.com/shield-tablet/development/shield-apps-cyanogenmod-12-t3070116
3. In TWRP click on Backup and Swipe to Back Up
4. After it has finished Click on Install and choose the .zip of your Custom Rom
4.1 To install the Google Apps click on Add More Zips an select the GApps zip
4.2 And again click on Add More Zips and select nvsystemservices.zip
4.3 now you can Swipe to Confirm Flash
Root
Download the Latest Stabel SuperSU file: http://download.chainfire.eu/supersu-stable and copy it to the internal or SD Card Storage
1. Open Minimal ADB and Fastboot
2. Type in
Code:
adb reboot recovery
to enter the recovery mode
3. In TWRP click on Backup and Swipe to Back Up
4. After it has finished Click on Install and choose the UPDATE-SuperSU-v2.65-20151226141550.zip (or similar) and Swipe to Confirm Flash
5. Restart you Tablet and now a new App SuperSU is Installen
Please Leave a post if you are getting errors or someting isn't clearly explaned!
-Toby
Click to expand...
Click to collapse
My tablet just keeps rebooting to the lock screen whenever I try to go to recovery mode... Somehow twrp doesn't stick... It did when I was on Lollipop. I have already tried to flash the recovery, do a full reboot before trying to get in twrp but without success.
On mac
You dont need any drivers
(For every fastboot command in ADB+Fastboot you will need a ./ in front of it...)
example being ./fastboot oem unlock
xsquid said:
On mac
You dont need any drivers
(For every fastboot command in ADB+Fastboot you will need a ./ in front of it...)
example being ./fastboot oem unlock
Click to expand...
Click to collapse
Thank you I added this in guide
nielsscholte said:
My tablet just keeps rebooting to the lock screen whenever I try to go to recovery mode... Somehow twrp doesn't stick... It did when I was on Lollipop. I have already tried to flash the recovery, do a full reboot before trying to get in twrp but without success.
Click to expand...
Click to collapse
Try other TWRP versions like 2.8.7.0 or 2.8.7.1 i think the 3.0.0.0 is for Andoid 6.0 devices so if you are currently in the newest version of the Android OS try this one out
The 3.0 versionof TWRP was unstabel on my device so you should flash it wipe the storage and flash one of the older ones
nielsscholte said:
My tablet just keeps rebooting to the lock screen whenever I try to go to recovery mode... Somehow twrp doesn't stick... It did when I was on Lollipop. I have already tried to flash the recovery, do a full reboot before trying to get in twrp but without success.
Click to expand...
Click to collapse
3.0.0.0 wasn't out yet when I did mine but it was doing the same thing and this worked perfectly:
fards said:
Try deleting recoveryonboot.p in /system
Click to expand...
Click to collapse
Credit to fards.
xsquid said:
3.0.0.0 wasn't out yet when I did mine but it was doing the same thing and this worked perfectly:
Credit to fards.
Click to expand...
Click to collapse
How can I remove this file without root ?
SonicDBZFan07 said:
How can I remove this file without root ?
Click to expand...
Click to collapse
Try your normal command line for flashing recovery except change flash to boot. It doesn't flash it, just boots to it.
In other words, if you are using:
1. Fastboot Flash recovery recoveryname.img
Do instead:
2. Fastboot boot recovery recoveryname.img
While in recovery (make sure the supersu zip is on the sd card or wherever you normally flash files from first) flash supersu. You should now be rooted but without a recovery.
Go then to delete the file and then reboot, flash the recovery as normal (#1), reboot and then it should be good to go. It was for me.
rooted device no need to unlock bootloader it will unlock for ittself
just go to playstore and dowload twrp manager
choose the name of your device
and choose one of the two versions available
for shield tablet the version 3.0.0.0 doesnt work well it spilts the screen but wthe other version Works great
the link is twrpmanager on play.google
this way you dont need to connect your tablet to your pc
Great work!
Thank you for the awesome guide. Besides deleting the TegraOTA apk, is there any other app/service that I should disable to prevent OTA updates?
Followed the guide after screwing my device up with official firmware. Thanks for nothing Nvidia, why are you offering OTA that cause the device to stop working correctly.
Nothing happened other than appearing to boot itself to the "powered by android" (kernel) screen over and over.
Held down power + volume UP ...
And it factory reset itself.
Somehow.
Did I mention that Nvidia is a terrible company?
Edit: Fixed using TWRP v3.0.0 - this guide should be updated to reflect this particuarly as people who screw their device up after trusting Nvidia OTA MM will be using it.
diji1 said:
Followed the guide after screwing my device up with official firmware. Thanks for nothing Nvidia, why are you offering OTA that cause the device to stop working correctly.
Nothing happened other than appearing to boot itself to the "powered by android" (kernel) screen over and over.
Held down power + volume UP ...
And it factory reset itself.
Somehow.
Did I mention that Nvidia is a terrible company?
Edit: Fixed using TWRP v3.0.0 - this guide should be updated to reflect this particuarly as people who screw their device up after trusting Nvidia OTA MM will be using it.
Click to expand...
Click to collapse
I'm sorry that you had that problem but this guide is a general guide and not an screw nvidia (besides they are awesom giving us a really good tablet for 200 Buck, but jea?) guide. TWRP v3.0.0 has his bugs so generally when you have finished deleting the stock rom you should flash TWRP 2.8.7.3 works the most stabel.
Trafalgar Square said:
Great work!
Click to expand...
Click to collapse
Thanks, i appreciate that
Add TWRP to M image (Shield 1.1)
Folks,
Just received Nvidia Shield K1 and OTA immediately upgraded it to M (Shield 1.1) and I unlocked bootloader no problem. However when I go to flash or temp boot twrp 2.x or 3.x it flashes OK, but when I reboot (either via fastboot or hard off/start to recovery manually) it appears it is overwriting the recovery partition and it just boots normally.
Is there a limitation to flashing twrp bootloader in M, and do I have to downgrade to L to flash recovery partition?
I seem to be happy w/ stock (limited stick time), I just want to root at this point and install my favs. Once I get this running will supersu pro preserve root, or do I need to turn off nvidia OTA process.
Also I see optimization for chrome, does this do anything X1 optimizations)?
Thanks
psychic99 said:
Folks,
Just received Nvidia Shield K1 and OTA immediately upgraded it to M (Shield 1.1) and I unlocked bootloader no problem. However when I go to flash or temp boot twrp 2.x or 3.x it flashes OK, but when I reboot (either via fastboot or hard off/start to recovery manually) it appears it is overwriting the recovery partition and it just boots normally.
Is there a limitation to flashing twrp bootloader in M, and do I have to downgrade to L to flash recovery partition?
I seem to be happy w/ stock (limited stick time), I just want to root at this point and install my favs. Once I get this running will supersu pro preserve root, or do I need to turn off nvidia OTA process.
Also I see optimization for chrome, does this do anything X1 optimizations)?
Thanks
Click to expand...
Click to collapse
After you flash twrp reboot to recovery. I may be wrong, but I think the stock ROM overwrites the custom recovery at reboot. If you reboot to twrp first after flash, twrp will disable this.
Sent from my SHIELD Tablet K1 using Tapatalk
Rooting
Hi everyone,
Yesterday got my new Nvidia Shield Tegra K1 and upon using it I noticed it's a great tablet for it's price range and will do my job easier while flying my Phantom 4. To be honest it's seems very stable and solid but was thinking about rooting it. I have some questions regarding the process wince I haven't rooted anything since my HTC Fire, log time ago that was. What are the benefits of rooting this device ? Will I still be able to update the Shield with its official updates ? Will I be able to roll back to an unrooted tablet should I need too ? I wasn't planning on flashing a custom rom but if I'll do what are the pros and cons of doing so ? I know that maybe searching this forum I would find all the answers needed but since there is so much information and threads I'm lost as from were to start from.
Would be nice to guide me about how to properly root my device with all the necessary links. My tab is running on Android 6.0.
I thank you so much guys for the hard work you all do in providing such information. I know it takes a lot of time and patience.
I just got a Shield K1. I like it a lot but I wanted to root it. Then I saw how confusing it is to distinguish between it and the previous model. My guess is whatever is out there that says Shield Tablet means the old one not the K1. I also updated mine to MM cause I'm using and 128GB micro sd card for internal storage. I guess I'll just have to wait until more support comes out for this tablet such as a stable TWRP 3.0 Recovery and the ability to gain root access and custom ROMs like CM 13.
do you recommed to install all OTAs before install custom recovery and custom roms or is it better to install twrp-2.8.7.1 out of the box and then go for the custom stuff ?
I would install all updates to get the latest bootloader. Do not install twrp 2.8.7.1. Install the official 3.0.x from the official site.

Restoring Galaxy Note 10.1 GT-N8013 and Adding TWRP with Root

This is my post basically backing up files for the Galaxy Note 10.1 GT-N8013 "p4noterf" so we don't lose them later.
Restore factory fimeware
If you have crashed out your Galaxy Note 10.1 GT-N8013 and need to restore it try the following
1. First make sure you can enter download mode: Power + Vol. Down and then Vol. Up to continue (Google if unclear)
2. Download the latest factory firmware (N8013UEUCOI1_N8013XARCOI1_XAR) here:
https://mega.nz/#F!UdFwWLyL!006TWe3MPyK-9yeAJlH7AQ
3. We need it unzipped so unzip it.
4. Download Odin such as Odin 3.13.1 here: https://mega.nz/#!wZ9H1ArK!TLiWdY9YUKNzVpnVXuqzJz4rtA86XysGlmFfdWl5LvE
5. Unzip Odin and click it to start it up. It's the file named Odin3 v3.13.1 (or Odin3 v3.13.1.exe)
6. With your tablet in download mode plug it into your computer, it should show up in Odin
(If it won't connect to PC try another USB port or install the drivers: https://mega.nz/#!lFMVDbSC!j_sMAjcXneHSPkqgOysc382dqVzNB82QP5T_Huet8YA )
7. Load the unzipped firmware into the AP slot and press start
Install CWM Recovery and Root:
Follow the second root method here:
https://forum.xda-developers.com/showthread.php?t=1831152
---> which leads to here: http://rootgalaxynote.com/galaxy-no...t-galaxy-note-10-1-easiest-methodcwmmethod-2/
Backup of files from this method: https://mega.nz/#F!5c8lHSLR!540QzdGl4z1kknFNYlmNDg
Install TWRP
1. Through Google Play store Install TWRP app and either select your device, download files and flash firmware in the app or continue at step 2 after installing.
2. You can direct download latest versoin to your sdcard (Download folder will do): https://dl.twrp.me/n801x/
Backup of latest at the time of this writing was ===> https://mega.nz/#F!EYlXCQhB!fTx37McGKNCWXkumldtHLA
3. Inside the TWRP app select the file you downloaded
4. Flash firmware
You can now use TWRP to install a custom rom if you wish, I used CM 13.1
https://forum.xda-developers.com/galaxy-note-10-1/development/rom-lollipop-t3269375
Note:
I had to use this gapps to get my keyboard to work during setup!!!
https://mega.nz/#!Id1VXK7T!3VfvcdmyDzofaAmEBlhpgArxBmtJVW43wq55bEMEPgw
1. On the WiFi screen in the bottom corner there's a little keyboard symbol, touch it to open option.
2. Move slider to On position
Thanks, was looking for just this thing
Yas
Thank you for this! Made sure to save those files while I still can. Was able to restore, root and install Lineage OS 14.1 on this old Note 10.1 I inherited. Truly amazing to jump from Jellybean straight to Nougat when Samsung couldn't have cared less to update this tablet.
Cm 14.1 sidesync 4.7 on samsung gt-n8013 not working
Does anyone have any luck getting the Sidesync to work with Wifi Direct from the Samsung Note 10.1 Gt-N8013 Android 7.1 to the Android 8.1 Samsung S8 Phone. Trying to Get the Mirror Feature to Remote Control the Phone on the Tablet Screen
Can install sidesync and click to run .. app screen opens but than crashes with error message about not being able to mirror. Seems something not communicating with Wifi or hardware on tablet incompadability..??
Firmware V1.0
Your post has nothing to do with this topic .
see your identical post moved to Q&A
When I download the firmware using Odin, where does it get saved? I can't find the file with TWRP when I am ready to flash the firmware.
Odin does not download firmware.
You download firmware .
Odin is an installer for stock firmware tar files .
TWRP installs custom rom zips .
BrettApple said:
Thank you for this! Made sure to save those files while I still can. Was able to restore, root and install Lineage OS 14.1 on this old Note 10.1 I inherited. Truly amazing to jump from Jellybean straight to Nougat when Samsung couldn't have cared less to update this tablet.
Click to expand...
Click to collapse
Not sure if you'll see this but how did this go? I have the n8013 (2013) model and would really like to update it past Jelly Bean. My biggest concern is the S Pen and S Notes still working as well as they do now. Is yours still up and running? Thanks!
SPen etc dont really work on non Samsung firmware .
Suggest a search for alternative spen on play store etc .
Install CWM Recovery and Root:
Follow the second root method here:
https://forum.xda-developers.com/showthread.php?t=1831152
---> which leads to here: http://rootgalaxynote.com/galaxy-no...t-galaxy-note-10-1-easiest-methodcwmmethod-2/
Backup of files from this method: https://mega.nz/#F!5c8lHSLR!540QzdGl4z1kknFNYlmNDg
Click to expand...
Click to collapse
I'm trying to fix a bricked Note 10.1 (stuck on a bootloop and can't even access Recovery Mode, TeamWin logo appears and then tablet resets) but everything you linked there is already gone.
marianito10 said:
I'm trying to fix a bricked Note 10.1 (stuck on a bootloop and can't even access Recovery Mode, TeamWin logo appears and then tablet resets) but everything you linked there is already gone.
Click to expand...
Click to collapse
I managed to solve same problem by flashing TWRP recovery using heimdall
How to flash recovery using Linux and Heimdall? (SOLVED)
Hi. Decided to try to give some new life to this old thing. But when I install the TWRP thing and shut it down it immediately boots up and overwrites the TWRT. I know the instructions says to let go of the buttons "very fast", but I've been...
forum.xda-developers.com
michael.pihlblad said:
I managed to solve same problem by flashing TWRP recovery using heimdall
How to flash recovery using Linux and Heimdall? (SOLVED)
Hi. Decided to try to give some new life to this old thing. But when I install the TWRP thing and shut it down it immediately boots up and overwrites the TWRT. I know the instructions says to let go of the buttons "very fast", but I've been...
forum.xda-developers.com
Click to expand...
Click to collapse
Ok, I extracted the PIT file from my tablet with Heimdall (like it was suggested in the readme), then I flashed TWRP Recovery and same result... Bootloop, and when trying to access Recovery Mode the TeamWin logo shows up for a second and the tablet reboots. Also tried flashing a stock rom, PhilZ Touch recovery, and still both Odin and Heimdall always say it was "succesful" but the result is always the same, nothing changes.
It's just weird to me how the TeamWin logo still shows up even after I flash the stock rom. I read somewhere that the oldest stock rom for my device might work, but I can't find a link anywhere for it except here, where it's Premium Only...

Battery health help

I want to know the EXACT battery capacity(as in battery health) left in my s7 edge battery.unrooted stock nougat. Don't at all mind if computer is needed.Help?
go to the play store and download phone info and go to personal tab and it will tell you
https://forum.xda-developers.com/s7-...ernel-t3706089
The goal of this is to give you better performance and battery, and now supports ALL S7s!!!
I have included into the script where it will create a file craz_test.log which will tell if and when the script has ran at boot in /data
I have also implemented into the script where it will run the script every 3 minutes (180 seconds) as the kernel will reset itself often.
Thanks to @kevp75 for the help with troubleshooting and making things easier
HUGE thanks to @king3opobn for providing information and testing on the Exynos variant!
Instructions -
- Download .zip
- Flash with FlashFire
- Enjoy
A very in-depth explanation of what everything does can he found here
Downloads -
* I will be keeping the two latest versions up, PM me if you need an older version.
Qualcomm V1.6.2 -
Download https://androidfilehost.com/?fid=962187416754460586
Exynos V1.6.2 -
Download https://androidfilehost.com/?fid=890129502657583069
Quote:
Originally Posted by Mort015
Idk if you have G935F or G935W8. The links in Step 2 are for G935F. I did not found the files for G935W8.
If you want to fix it here is what i did:
STEP 1 - ROOT IT!
1. Download Magisk zip and pull it to your Sd card or internal storage
2. Flash TWRP via Odin (put it in "AP"). Be sure to disable auto reboot in odin. If it says PASS!, hold the 3 keys (volume up + home + power) wait until twrp screen appears. (Your Warranty is now void)
3. Now flash the Magisk zip and reboot your device.
**LINKS:**
ODIN 13.3:
https://forum.xda-developers.com/att...mentid=4431749
TWRP FOR S7edge Exynos ODIN Flashable:
https://eu.dl.twrp.me/hero2lte/twrp-...ro2lte.img.tar
Magisk:
https://androidfilebox.com/download/2272/
**All these downloads will start directly bc i choosed direct links**
**You have successfully rooted your S7edge!**
STEP 2 - UPDATE BL AND MODEM (FIX STANDBY DRAIN)
1. Boot your S7edge into Download mode
*Volume down + home + power*
A blue screen with a triangle appears. Press Volume Up key and its in Download mode
2. Flash latest Oreo Bootloader (ERF4) and Modem (EREO) via odin (!!be sure to disable "NANO EREASE" in Odin!!)
Put the Bootloader file into "BL" and Modem file into "CP" and hit Start
2. Let it reboot normally
**LINKS:**
Bootloader ERF4:
•G935F:
https://androidfilehost.com/?fid=11050483647474827870
(IF YOUR MODEL IS G935W8 SKIP THIS STEP - MAYBE OTHER CAN PROVIDE LATEST BL AND MODEM FOR G935W8)
•G935W8:
Not Found?
Modem EREO:
•G935F:
https://androidfilehost.com/?fid=11050483647474827874
(IF YOUR MODEL IS G935W8 SKIP THIS STEP - MAYBE OTHER CAN PROVIDE LATEST BL AND MODEM FOR G935W8)
•G935W8:
Not Found?
**You have successfully updated your bootloader and Modem - Cell Standby drain is fixed!**
STEP 3 - "FIX" ANDROID SYSTEM DRAIN
1. Download TGP Kernel for Galaxy S7edge and put it to your Sd card or internal storage.
2. Shut down and boot into TWRP Recovery
3. Flash TGP Kernel
My Choices in Aroma:
•Magisk root
•Clear root data from previous root
I didnt select MTweaks or other stuff. I only picked the 2 options above
------Just select Magisk and choose Delete Root data (from previous root). Deselect all other things ----
4. Wipe DALVIK/ART CACHE
5. Reboot and youre Done!?
**LINKS:**
TGP KERNEL FOR S7/S7edge Exynos (G93XX/F/FD/W8):
https://androidfilehost.com/?fid=5862345805528042735
**You have Successfully "Fixed" Android System Battery drain!**
--------THATS IT--------
If you want to get more better Standby results, install ForceDoze app from Play Store and just activate it.
My result: 7h 40min SOT
i used my phons the whole day. It didnt had much standby time..... but with this Setup, my S7 Battery life is like Nougat.
I am not responsible for any damages. Do it at your own Risk
Btw. I forgot a step:
Install this Magisk module:
https://forum.xda-developers.com/app...3766883/page39
and this for better
https://forum.xda-developers.com/s7-...ernel-t3706089

Updating Android on SM-T560

I got a brand new Samsung Tab E 9.6" (SM-T560). Shame on me, I didn't notice before it comes with Android 4.4.4
As many apps require newer OS, I'm wondering if I can upgrade it to Android 6.0.
Plase note:
1. I'm not an expert, so please explain me as easy as possible how to do it, if it can be done;
2. please tell me, in case,if it's 100% legal and/or if it can void warrant.
Thank you.
Samsung Tab E
Check again --- Just picked up the same thing this week at Walmart for $129.00 + $25 Google Play credits - it came with 7.1.1. - Take it back sounds like you got some real old stock..
They do come with Android 4.4, however if you go to Samsungs web page you can find a crispy 7.1.1 image you can flash with Odin. Then if you wish you can unlock bootloader and flash a custom recovery like CWM or TWRP and then chainfires systemless root. Cheers! Upgrading to just 7.1.1 with Odin will not void your warranty, anything else that involves unlocking the bootloader will and is will trip samsungs knox security feature. If warranty is important only flash the 7.1.1 image using Odin.
Hello,
I'm searching forsuch an update, too. But It seems, that it was only released for USA and CA. But I'm from Germany. @xSLAYERx do you have a link to the ROM?
xSLAYERx said:
They do come with Android 4.4, however if you go to Samsungs web page you can find a crispy 7.1.1 image you can flash with Odin. Then if you wish you can unlock bootloader and flash a custom recovery like CWM or TWRP and then chainfires systemless root. Cheers! Upgrading to just 7.1.1 with Odin will not void your warranty, anything else that involves unlocking the bootloader will and is will trip samsungs knox security feature. If warranty is important only flash the 7.1.1 image using Odin.
Click to expand...
Click to collapse
heya, could you please share a link of this 7.1.1 with me? or the image itself, I can't find it anywhere and I'm stuck with 4.4.4
thank you!
hurkagyurka123 said:
heya, could you please share a link of this 7.1.1 with me? or the image itself, I can't find it anywhere and I'm stuck with 4.4.4
thank you!
Click to expand...
Click to collapse
Hi, I was with the same problem, and I posted here in XDA, I'm from Brazil, i have the model SM-T560, and now i'm using nougt, from Lineageos 14.1, and this was only possible, because someone from Xda, gave me the following link:
http://www.gearappsnap.com/2018/03/14/how-to-install-android-nougat-on-the-galaxy-tab-e-sm-t561/
The rom is of the SM-T561 model, but also works on the SM-T560, read everything before doing anything. When installing TWRP, you can install the version of the SM-t560, which will not make any difference.
One more thing, I advise you to see some YouTube tutorials how to install TWRP. Just in case.
Thank You for your help!
hurkagyurka123 said:
Thank You for your help!
Click to expand...
Click to collapse
For nothing, follow step by step that will work perfectly. Except this will end your warranty, but it's the only way to install an update. If you need any help, just talk.
gearappsnap site is not really good made.. The download links behind text which look like a normal one and also that it says, flash boot.img only when the memory is wrong..
Well, CM14.1 did not work for me.. I had to flash boot.img before EVERYTHING else, then rebooted again to TWRP and THEN install cm14.1.
Um, did you follow step by step?
I followed what was written, and for me it worked normal, The boot.img file is to fit just the memory of the table because it had some problem with the rom, without installing it, has tablet that got locked in infinite loop. And the links were working normal for me.
Links that i download:
ROM: https://drive.google.com/file/d/1D0wrGM4XyZMo-t3ll4trvJ93Pl1KEZ1V/view
Boot.img: https://drive.google.com/file/d/1bqGmu4NTlEeKdsFPGjIY9lnPqujjazr4/view
softkeys: https://drive.google.com/file/d/1ddSB28g1xTd0J7sl8V6QmlPZA1aX77ot/view
Gaps: https://opengapps.org/
First the TWRP is installed, with the battery above 70%, then restarts the tablet.
Within the TWRP:
1) Wibe-> advanced wibe-> selects almost anything but not microSD and OTC. and Wibe.
2) Back to the home page-> Install-> select the external storage (the files must be saved on the SD card).
3) The first file to be installed is the rom.
4) Once installed, go back to the files and at the bottom of the page you will click install image and install boot.img.
5) After Boot.img is installed, switch back to Install Zip, and Install the Softkeys.
6) After installing the softkeys go back and install the Gaps. (I used the ARM-7.1-Pico) and restart the tablet.
In my case I did not install superSU. That's what I did. This rom has some flaws but better than Kitkat, that's what I think.
thE_29 said:
gearappsnap site is not really good made.. The download links behind text which look like a normal one and also that it says, flash boot.img only when the memory is wrong..
Well, CM14.1 did not work for me.. I had to flash boot.img before EVERYTHING else, then rebooted again to TWRP and THEN install cm14.1.
Click to expand...
Click to collapse
HEY!
download this: https://mega.nz/#!yEpjCITA!9EA101hYDOajDwmBHKxSZhv3QkV-RI61MkLn0JYNRZY
unzip and install and follow steps.
1-install TWRP 3.0.2-1 via odin
2- copy ALL files of .zip in one folder in storage (mem stick)
3- power off and then power on IN TWRP (vol + + home + power button)
4- make full wipes except externar storage
5- install zip (first choice lineage -14, then choice open gapps, next choice key.zip)
6- install img (choice boot.img)
7- WIPE (Dalvik, cache)
enjoy android 7.1 in your tab e T560
63or63 said:
HEY!
download this: https://mega.nz/#!yEpjCITA!9EA101hYDOajDwmBHKxSZhv3QkV-RI61MkLn0JYNRZY
unzip and install and follow steps.
1-install TWRP 3.0.2-1 via odin
2- copy ALL files of .zip in one folder in storage (mem stick)
3- power off and then power on IN TWRP (vol + + home + power button)
4- make full wipes except externar storage
5- install zip (first choice lineage -14, then choice open gapps, next choice key.zip)
6- install img (choice boot.img)
7- WIPE (Dalvik, cache)
enjoy android 7.1 in your tab e T560
Click to expand...
Click to collapse
In reality you have to install boot.img and softkeys before, the reason is because they are modified for the T56X, otherwise install themselves after the gaps will give error when to use. At least it is what was written on the site, and so far I have been using no defect at all.
marcelo010 said:
In reality you have to install boot.img and softkeys before, the reason is because they are modified for the T56X, otherwise install themselves after the gaps will give error when to use. At least it is what was written on the site, and so far I have been using no defect at all.
Click to expand...
Click to collapse
I do not think that is effective. if you come from 4.4.4 and install it before the lineage ROM (BASE 7.1 for example) it will be erased again because with the new base everything is overwritten.
63or63 said:
I do not think that is effective. if you come from 4.4.4 and install it before the lineage ROM (BASE 7.1 for example) it will be erased again because with the new base everything is overwritten.
Click to expand...
Click to collapse
Well that didnt work for me.. Was coming from Stock 4.4 ROM. Flashed the CM14.1 AND softkeys, but NOT the boot.img, because you cannot flash zip and img files at the same time. Then I booted it and it crashed 10-60secs after it booted. Sometimes it had a boot loop.
Then I tried CM 13 which worked fine and in a german board, someone wrote (based on the gearappsnap site) that the boot.img has to be the first thing to flash and even reboot into twrp again and then flash CM14.1 + softkeys + gapps.
If you could install it, that's what matters, in my case it worked the way it was on the site, there are some bug's, but it's a lot better than the stock rom, and I was already using a custom rom on the T560 before installing this LineageOS 14.1,and it was this link:
https://forum.xda-developers.com/galaxy-tab-e/development/rom-lightning-t3716039
Szia!
did the upgrade work for You For galaxy tab e?
Done this and it worked but.........
The tablet is really slow, not netflix compatible with this version, and so on....
I think I just might downgrade again
After I have tried step 3, it didnt open in twrp mode. My tab stucks in black screen with "Samsung galaxt tab e " text in background.Please let me know how to proceed.
[QUOTE = "63or63, Post: 78613279, Mitglied: 4438103"]
HI THERE!
Download this: https://mega.nz/#!yEpjCITA!9EA101hYDOajDwmBHKxSZhv3QkV-RI61MkLn0JYNRZY
unzip and install and follow the steps.
1-install TWRP 3.0.2-1 through odin
2- Copy ALL .zip files to a folder in memory (mem stick).
3- turn off and then turn on IN TWRP (vol + + home + power button)
4- Make full towels except for external storage
5- install zip (first choice line -14, then select open gaps, next choice key.zip)
6- install img (choose boot.img)
7- WIPE (Dalvik, Cache)
enjoy Android 7.1 in your Tab e T560
[/ZITAT]
1000 tanks BR
.
1000 x danke es hat funktioniert
Translation: 1000 x thank you it worked

lineage 17 on samsung galaxy a20e

there are some instructions how to install twrp or lineage on nnthe samsung galaxy a20e. it took me a while to manage it, for one part because it seems sometime i did not do everything exactly like it was described (old fault of mine...) sometimes i found some explication in another instruction.
this is why i post my experiences, to encourage those who also struggle with problems, don't hesitate, sometimes it only takes a bit longer, but also because some things i still don't understand, maybe somebody can explain me what happened..
naturally, firsty of all i first had to install twrp. so i searched for instructions and found some, including liks to download the twrp.tar for my model. some of them i was able to flash by odin, but when i then restarted the phone it only showed a black screen with some pink in the middle, with some fantasy i could read a slight samsung or samsung a20 in it. this happened when i tried to restart in recovery to flas disable-dm-verity, also when i tried to restart direct to system. with all the attempts i got very experienced in flashin back stock rom...
then i found a working recover after restart to recovery i got my twrp screen and was able to flash the no-dm-verity or magisk.
so next i tried to flash the lineage (unofficial lineage 17.zip) but always got the message invalid zip format. tried to unzip and zip again but no way. so i thought i might get lucky with adb sideload, entered the twrp advanced and clicked adb sideload, the screen told me starting adb sideload but the phone could not be detected by the computer. the computer detected it when switched on or in fastboot, so it seems the sideload did not really start.
so i searched the interenet for roms because i really wanted to get rid of google and a million of apps in the stock that i don't need. i found the links to andyyans gsi and several other zips.
as i was not used to the gsi installation i thought i better stick on what i know and tried to install another zip. but most of the time i got the invalid zip message or the zip is for another phone although i downloaded it for the a20e. but then twrp accepted the crdroid.zip (eureka) i downloaded, i was very happy, after the instalation was finished i restarted the phone and the screen went black, turned off and it seemed not pressing to download, to recovery or to start changed anything. i also tried with pressing vol up, vol down and conecting with computer but also no downloadmode started. so i pressed very long always several buttons and after a while the phone vibrated by pressing long vol down and power, but no screen. after it vibrated sometimes like this i turned to vol up and power, it vibrated again and finally twrp started. although the phopne was fully charged when i started the process, it now had only 8% battery.
so i charged the phone again, flashed the stock rom and twrp to try again to find a solution. at this time i also found an instruction that explained why after flashing twrp the system can't recognize the folders (downloads, music... ) and only gives them combinations of letters and ciffers, i have to decrypt it in twrp, wipe, format data, yes and this problem is solved. i don't know it happens always and who made the instructions to flash twrp thought this is common knowledge but in the first innstructions i read it was not mentioned.
i tried again to flash zips and now got a funny eroor message from twrp, unable to zip, this zip is for a20 but this phone is a a10. i tried another zip, the installation started and in the text i could see that it was for a10... so somehow twrp was sure to live on na a10, how could this be??? i thought maybe the twrp was for the a10 (it was a 3.4.x), so i again downloaded a tar directly from the page of twrp for the a20. but when flashed this twrp (3.5.x) and tried to restart to recovery (or to system) the phone was still in downloadmode and refused the custom rom. i had to flash back to stock, then flash again the twrp3.4 that thought my device is a a10, then i could flash the new twrp3.5 i was sure it was from the original site and for my device. i don't know the 3.4 was patched, i got the downloadlink from one how-to-site, but i did not read anything that it was patched...
but after testing all the zips that did not work, and also with the new twrp i was not able to sideload i decided it is time to learn how to handle the xz. so i extracted first the lineage 18, installed it by clicking install image (after wiping) but again the phone turned black and i had to press a while to get twrp restarted and the battery again was nearly down.
the same process worked with the lineage 17, so this is what is now innstalled. both where the correct ab versions, i checked before with treble info what version i need.
so, can anybody explain me
-what happened with my battery when the phone turned to apparently death?
-why could twrp think my phone is a a10, would a twrp for a10 work on my phone?
-is it possible that the sideload feature does not work on this phone?
¡¡¡and many thanks to all those who upload roms and instructions so people like me can make their phones a bit more like they want them!!!
The first time I flashed my A20e (SM-A202F) had the same problems with finding the right TWRP. I cannot answer your questions, but I can tell you what I do.
Beforhand: unloock the bootloader. Upgrade to the latest Samsung firmware. Download AndyYan's 18.1 LineageOS GSI arm64_bvS. Thought arm64_bvS-vndklite can work as well, I found that bvS has less bugs.
After installing the Samsung drivers and the adb stuff on a PC with Windows, I install Odin and flash with Odin the attached TWRP (AP), while phone is in Download mode.
I then go to recovery (TWRP) and if the folders and files are encrypted, I format, then yes. I wipe 4 things: dalvik, catche, system and data.
I then move the GSI image file inside the zip (not the zip) by drag and drop on my PC. Then in TWRP I click install, select image, not zip, select system and flash. Then I reboot to system.
I never had any problems with this installation process. The bvS has a bug with the Lineage music app, but simply install a local music app, such as Musicolet or AIMP from the Aurora Store (from F-droid).
On the camera side I haven't seen any app that significantly improves photo quality. My recommendation would be FreeDcam from F-droid. Use it on special occasions, as it tends to heat the phone.

Categories

Resources