Database Users

[Q] How To Root A510F Stock 7.0 Nougat

So I've tried two methods already and I end up with a soft brick eventually on both methods
Method 1 - SR3 SuperSU Zip File
I came across this method in a thread here on XDA (can't remember). But my steps are as follows:
• Flash TWRP via Odin on unrooted stock room
• Flash the SuperSU Zip file via Odin and reboot
• Phone boots successfully. I go to SuperSU app and disable "Mount Name Space Partition" in order to use Titanium Backup. Then I reboot.
• I install Titanium Backup able start to remove bloatware. No critical system apps, just Samsung apps like SVoice etc.
• After debloat I reboot immediately, but phone no longer boots and gets stuck in Samsung A5 logo
Method 2 - Magisk
• I flash TWRP via Odin on unrooted phone
• Install Magisk from Play Store and it prompts me to download and install the Magisk Zip
• After download I boot into TWRP and flash the Magisk Zip and reboot successfully
• I open Magisk all and it's all green and everything seems to be installed properly and root is working.
• I install Titanium Backup and when launching for the first time it tells me the SU binary needs to be updated but I can continue to use the app and I must use SuperSU to update. I ignore this message and proceed to debloat.
• I reboot and again get stuck on the Samsung logo screen
The problems seem to occur when ever I try to use any app that requires root access.
Any solution? Have others been able to get stable root on stock ROM that's not deodexed?

Kindly share super SU zip file

Issue with Magisk and OTA version 7.1.2

I am having issues getting an OTA with Magisk 15.2 installed. MAgisk Manager is 5.5.3.
1. I did a flash of fastboot rom for the first december update of 7.1.2 without overwriting storage.
2. I unlocked the bootloader
3. I booted (did not flash) to 3.1.1 of TWRP and loaded Magisk 15.2. Everything worked fine.
4. I followed this guide https://github.com/topjohnwu/Magisk/blob/master/docs/tips.md#ota-installation-tips and went Magisk Manager → Uninstall → Restore Stock Boot. I received a confirmation that the stock boot was restored. However, at this point, my google camera still works. This seems illogical if the stock boot is replaced.
5. When I download the second december OTA update I get a failure to install error at step 2 of 2.
Has anyone had similar issues or have solution? If I post to the Magisk threads, what logs will they require and how specifically must I create the logs and where will they be stored?

I didn't get a reply here. Mod, please delete this post. I will add it at Magisk thread.

Oh, wow. I have also installed magisk in the way you have. I hope it hasn't messed with your system. However I'm fully updated so have no way of trying your method of OTA.
Please update me if you do solve your issue incase I also have similar difficulties.

It is no major issue, it is just a pain in the butt to have to flash the fastboot rom to update... It take 15 minutes and a PC if you can't get OTA...
I'm just lazy.

ludditefornow said:
I am having issues getting an OTA with Magisk 15.2 installed. MAgisk Manager is 5.5.3.
1. I did a flash of fastboot rom for the first december update of 7.1.2 without overwriting storage.
2. I unlocked the bootloader
3. I booted (did not flash) to 3.1.1 of TWRP and loaded Magisk 15.2. Everything worked fine.
4. I followed this guide https://github.com/topjohnwu/Magisk/blob/master/docs/tips.md#ota-installation-tips and went Magisk Manager → Uninstall → Restore Stock Boot. I received a confirmation that the stock boot was restored. However, at this point, my google camera still works. This seems illogical if the stock boot is replaced.
5. When I download the second december OTA update I get a failure to install error at step 2 of 2.
Has anyone had similar issues or have solution? If I post to the Magisk threads, what logs will they require and how specifically must I create the logs and where will they be stored?
Click to expand...
Click to collapse
4. restore boot image function will reflash stock boot.img to boot partition, but until reboot you are still using patched_boot.img which is loaded in memory. So you will not lose root access and all Magisk modules work (until reboot).
5. failed update could be due to tampered system partition (it is enough to mount it as RW in TWRP). Reflash fastboot images without data erase and do not modify system in any way afterwards.

_mysiak_ said:
4. restore boot image function will reflash stock boot.img to boot partition, but until reboot you are still using patched_boot.img which is loaded in memory. So you will not lose root access and all Magisk modules work (until reboot)
Click to expand...
Click to collapse
Thanks for the detailed reply.. this is the thing that confuses me. The Magical guide clear states to not reboot the phone after uninstalling the patched boot.. so how can the ota possibly pass?

ludditefornow said:
Thanks for the detailed reply.. this is the thing that confuses me. The Magical guide clear states to not reboot the phone after uninstalling the patched boot.. so how can the ota possibly pass?
Click to expand...
Click to collapse
OTA updater verifies system and boot partition (possibly other partitions too) - if they are intact, it applies the OTA patch to unused, secondary partitions. OTA updator doesn't care if your currently running boot image is patched or not, because it's not using files from RAM, but from ROM. Once update finishes its thing (stage 2/2), you install Magisk in backup boot partition, which after reboot becomes active. This is why it's possible to apply OTA while you're rooted with Magisk and you have A/B partition system (as long as you follow the guide).

[GUIDE] Root and keeping root options

Update 230526: Correct numbering of "B.1.1 Simple" to "B.1.2 Simple", use "OOS 13+" instead of "OOS 13" as OOS 13.1 is now available
A. First time rooting​
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This process is common across all options
A.1 Flashing Magisk patched boot image​There are two ways to sourcing a copy of the stock boot image (other than using TWRP - See A.2).
Using the MSM Tool readback option to pull a copy of the current boot image from the phone
Using Payload Dumper and a full update zip
A.1.1 Using MSM Tool ReadBack​The MSM Tool has a feature (ReadBack) that allows it to pull copies of partitions from a phone when it is connected in EDL mode to a PC.
This means that you can pull a copy of your currently running stock boot image directly from the (unrooted) phone and you are not dependent on having access to a full rom installation zip.
A big thanks to @scottlam1 for this information (see https://forum.xda-developers.com/t/oxygenos-a12-breaks-rooting.4456251/post-87067419 and following). You can get a copy of the MSM Tool from @Some_Random_Username's https://forum.xda-developers.com/t/...ol-to-restore-your-device-to-oxygenos.4180837. I used the one for OOS 11.0.7.9 for KB05AA when testing this process.
Find your current slot by connecting your phone to your PC and running adb shell getprop ro.boot.slot_suffix Note: on OOS 12 when you connect the phone to the PC you must enable "Transfer files" on the phone for ADB to see the device.
Start MsmDownloadTool V4.0.exe
Select User type: Others and click Next
Press F8
Select the appropriate boot partition (boot_a or boot_b based on the getprop result). Note: do NOT select both boot_a and boot_b because ReadBack will only produce one boot.img file and the _b extract will overwrite the _a extracted file.
Enter the password: oneplus and then press OK. You should now see a ReadBack button underneath the Target dropdown list.
Reboot the phone into EDL mode using adb reboot edl . When you see it connected to the MSM Tool - it will show an entry with COM3 (for example) - click on the ReadBack button.
Warning: Do NOT click on the Start button as this will start the installation process and reset your phone.
MSM will show "ReadBack Complete" (in green) when it has copied the boot image and power off the phone. Close the MSM tool.
Disconnect the phone from the PC, turn on your phone, reconnect it to the PC, and copy the boot image (it's in C:\boot.img) to your phone.
The rest of the process is the same as that in section A.1.2 below, but starting from step 6 in @DroidFreak32's guide as you already have the boot image.
A.1.2 Using Payload Dumper​Notes:
This can ONLY be used on full update zips, NOT on incremental updates.
Note: if you use @mslezak's Payload Dumper (see https://forum.xda-developers.com/t/...urrently-op8t-11-0-9-9-kb05aa-posted.4314677/ then you may be able to use it on incremental updates. I personally have not done this.
Follow the instructions detailed in @DroidFreak32's https://forum.xda-developers.com/t/...national-kb2000-kb2001-kb2003-kb2005.4178675/ paying attention to:
You can use the latest stable version of Magisk (my recommendation as of June 2022)
Do NOT use the "To flash" option in step 11 because this causes issues when you get the next OTA update. Use the the "To Temporarily boot into a rooted system (RECOMMENDED!!)" option.
Backup both the stock boot and Magisk patched boot images if you are going to use CLI
I also recommend that on OOS you install @Displax's Universal SafetyNet Fix Magisk MOD module v2.4.0 or later to pass Play Integrity with an unlocked bootloader (https://forum.xda-developers.com/t/module-mod-universal-safetynet-fix.4553699/).
A.2 Using TWRP or Orange Fox​I will use TWRP throughout the document to mean TWRP or Orange Fox unless indicated otherwise.
I use the TWRP installer zip to create an installer for Orange Fox by replacing the recovery.img file in the TWRP installer zip with the Orange Fox recovery image (the file has to be named recovery.img). The advantage of this is that you can then flash the recovery zip in recovery as well as in Magisk (install it as a module). And the installer zip will flash recovery to both slots.
Notes:
on OOS 11 use TWRP 11 from https://dl.twrp.me/kebab/
on OOS 12 use the WIP TWRP 12 version from https://forum.xda-developers.com/t/...roject-8t-9r-2022-07-27.4473983/post-87271673 or Orange Fox from https://forum.xda-developers.com/t/...ry-project-oneplus-8t-9r-22-nov-2022.4391139/
on OOS 13 use Orange Fox for OOS 13 from https://forum.xda-developers.com/t/...ry-project-oneplus-8t-9r-22-nov-2022.4391139/ or @apophis9283's version of TWRP from https://forum.xda-developers.com/t/recovery-unofficial-twrp-oneplus-8t-oos13-1-19-23.4541965/
Boot bootloader
fastboot boot <twrp.img>
(optional - see next item) Backup current boot
Install Magisk-*.apk and note that Magisk will create a backup of the current stock boot (see section C)
Install @Displax's Universal SafetyNet Fix Magisk MOD module v2.4.0 or later to pass Play Integrity with an unlocked bootloader (https://forum.xda-developers.com/t/module-mod-universal-safetynet-fix.4553699/)
Reboot system
Uninstall Magisk stub
Install Magisk-*.apk and in Magisk>Settings enable both Zygisk and Enforce DenyList
Reboot system
A.2.1 Keep TWRP​If you want to keep TWRP installed then the process is very similar to that described for Magisk. The difference is that this time we backup recovery and install TWRP. You can merge the Magisk process with the TWRP process by: Backing up current boot and recovery; Installing both the Magisk-*.apk and the TWRP installer zip.
Here's the process for just TWRP:
Boot bootloader
fastboot boot <twrp.img>
Backup current recovery
Note: the TWRP backups of physical partitions (like boot and recovery and so on) are actually image dumps. You could rename the files from *.emmc.win to *.img and install them using TWRP or other methods.
Install TWRP installer zip
Reboot system
B. Keeping root during an update​
B.1 System Update downloads and installs the update​This is using the built-in System Update tool, which you'll find in:
OOS 11: Settings>System settings> System Update
OOS 12 and higher: Settings>About device>Software update
The process is complicated because you cannot use Magisk>Magisk Install>"Install to inactive slot" as this will fail on OOS 11 (for incremental updates) and OOS 12 (for all updates, including the initial update from OOS 11 to OOS 12).
But testing on OOS 13 (updating from F.62 to F.63 on KB2003 and KB2005) shows that you can now use "Install to inactive slot" and, therefore, the simpler B.1.2 process can be used with System Updater for both incremental and full OTA updates. However this needs more testing (by adventurous IN users).
B.1.1 Safe​The following process is safe to use on all versions and types of OTA updates. It is courtesy of @osm0sis in https://forum.xda-developers.com/t/...ices-platforms.2239421/page-149#post-84764713 and @rage302 in https://forum.xda-developers.com/t/...ing-root-options.4387977/page-4#post-86830285.
If you have TWRP installed then reboot recovery, restore the stock OOS recovery (you would/should have taken a copy of it when you installed TWRP as mentioned in A.2.1), and reboot system. Without doing this, an incremental OTA will fail when it checks for the stock recovery.
Restore the current stock boot image using Magisk>Uninstall Magisk>"Restore images" and DO NOT reboot
Download and Install the update (and DO NOT reboot) using:
OOS 11: Settings>System Settings>System Update>Download and Install
OOS 12 and higher: Settings>About device>Software update
Copy the updated boot image as follows:
On PC:Find the inactive slot suffix:
adb shell getprop ro.boot.slot_suffix Note: on OOS 12 when you connect the phone to the PC you must enable "Transfer files" on the phone for ADB to see the device.
If the result is _a then the inactive slot suffix is _b otherwise it is _a
Take a copy of the inactive slot boot image: adb shell su -c dd if=/dev/block/by-name/boot<inactive slot suffix> of=/sdcard/oos-ota-boot.img replacing <inactive slot suffix> with the value you previously determined (_a or _b). Note: Magisk may prompt you (on your phone) to grant root access to Shell - grant it.
On phone: Patch the dumped oos-ota-boot.img using Magisk>Magisk Install>"Select and Patch a File"
Copy /sdcard/Download/magisk_patched*.img to your PC
Restore root to the current slot using Magisk>Magisk Install>"Direct Install (Recommended)". This is so you keep root in case the update somehow fails and you're returned to the current system.
Turn on Airplane Mode to prevent Google Play Services detecting that the phone is bootloader unlocked and making your phone uncertified in Google Play.
Reboot the phone from the System Update dialog; verify that you are now running the updated version
On PC: Reboot to bootloader using adb reboot bootloader
Boot (NOT flash) the patched boot image: fastboot boot <magisk-patched image> where <magisk-patched image> is the patched image you transferred to the PC
On phone: Verify that Magisk shows you are rooted
Make rooting permanent using Magisk>Magisk Install>"Direct Install (Recommended)" and reboot again
Turn off Airplane Mode
B.1.2 Simple​The following process is the simplest update method, but is limited to:
OOS 11 full image OTAs only
OOS 13+ full image OTAs and, starting with C.62, incremental OTAs (confirmed for KB2003 and KB2005)
If you have TWRP installed then reboot recovery, restore the stock OOS recovery (you would/should have taken a copy of it when you installed TWRP as mentioned in A.2.1), and reboot system. Without doing this, an incremental OTA will fail when it checks for the stock recovery.
Restore the current stock boot image using Magisk>Uninstall Magisk>"Restore images" and DO NOT reboot
Download and Install the update (and DO NOT reboot) using:
OOS 11: Settings>System Settings>System Update>Download and Install
OOS 13+: Settings>About device>Software update
Note that the OOS 13+ EU/IN local installer will first extract the update (and update the inactive slot partitions) and then prompt you to Install it and it is IMPERATIVE that you DON'T CLICK on Install at this point as it will finish the installation and reboot without prompting, leaving you without root.
Restore root to the current slot using Magisk>Magisk Install>"Direct Install (Recommended)". This is so you keep root in case the update somehow fails and you're returned to the current system.
Root the updated boot image using Magisk>Magisk Install>"Install to inactive slot"
Note: if you accidentally reboot from Magisk at this point and end up in a bootloop (EU and IN), see: https://forum.xda-developers.com/t/guide-root-and-keeping-root-options.4387977/page-17#post-88204853
On OOS 13+ EU and IN now tap on Install in the local updater process and on NA tap Reboot; on OOS 11 reboot.
To re-install TWRP, follow the process in A.2.1
B.2 Manual Install​This involves manually downloading the update zip and then installing it using one of the following options.
It is up to you to download the update (from whichever source you use).
How to get a copy of the update zip
The simplest option is to use Oxygen Updater (https://play.google.com/store/apps/details?id=com.arjanvlek.oxygenupdater).
It is also possible to get a copy of the update zip if the OOS 13+ System Updater is showing that an update is available and the installation button is showing "Extract".
You'll find the installation zip (named my_manifest_*_patch.zip or my_manifest_*_all.zip for incremental or full OTA) in /data/ota_package/OTA/.otaPackage.
B.2.1 Local Install​This is using:
OOS 11: System Update>Gear icon (local install)
OOS 12: MyApplication2 app (source: https://oxygenos.oneplus.net/English_20220225101104.apk; see https://forums.oneplus.com/threads/oxygenos-12-for-the-oneplus-8t.1555060/)
OOS 13+: On EU and IN Settings>About device>Software update>3-dot menu>Local install; on NA: same as for OOS 12
Note: If the Local install option is greyed out because the System Updater is showing that an update is available, then you can still use Local install by:
Turn on Airplane mode to prevent the System Updater finding the update again after the next step.
Go to Settings>Apps>App Management>3-dot menu>Show system and clear storage from Software update
If you have TWRP installed then reboot recovery, restore the stock OOS recovery (you would/should have taken a copy of it when you installed TWRP as mentioned in A.2.1), and reboot system. Without doing this, an incremental OTA will fail when it checks for the stock recovery.
Move the update zip to /sdcard (NOT a subdirectory of /sdcard).
Magisk>Uninstall Magisk>Restore images - this restores the stock boot image whilst keeping Magisk.
Install the update using the appropriate local installer for your version of OOS and DO NOT reboot.
Note that the OOS 13+ EU/IN local installer will first extract the update (and update the inactive slot partitions) and then prompt you to Install it and it is IMPERATIVE that you DON'T CLICK on Install at this point as it will finish the installation and reboot without prompting, leaving you without root.
Restore root to the current slot using Magisk>Magisk Install>"Direct Install (Recommended)". This is so you keep root in case the update somehow fails and you're returned to the current system.
Root the updated boot image using Magisk>Magisk Install>"Install to inactive slot"
Note: if you accidentally reboot from Magisk at this point and end up in a bootloop (EU and IN), see: https://forum.xda-developers.com/t/guide-root-and-keeping-root-options.4387977/page-17#post-88204853
On OOS 13+ EU and IN now tap on Install in the local updater process and on NA tap Reboot; on OOS 11 and 12 reboot.
To re-install TWRP, follow the process in A.2.1
B.2.2 Using CLI​CLI (command line interface) tools, such as Terminal (I use Termux from https://f-droid.org/en/packages/com.termux/) or ADB shell, allows you to manually download delta updates avoiding the need to wait for full updates or for someone to post a copy of the delta update zip.
If you use Terminal then you can install updates without the need of a PC (my preferred option).
Using line commands, at one level, can simplify some processes by avoiding the need to switch out to recovery and back again. On the other hand, they complicate things by requiring knowledge of how to use them.
The commands you need to be familiar with are:
dd to read-from/write-to the partitions in /dev/block/by-name
grep to scan the output of a logcat
getprop to find out which are the active/inactive slots
logcat to read the Android logs
su to run commands as root
Get a copy of the update zip
Note: I'm running the NA version of OOS. If the URL below for the OTA is different for other OOS versions, please let me know via a PM.
Once the phone tells me that there's an update available I do the following in Termux:
su -c "logcat -d" | grep -Eo "https://android.googleapis.com/packages/ota-api/package/[a-z0-9]*.zip"
This looks for the the Google OTA server file name in logcat and returns the source address. For example, the KB2005 C.11 incremental update was https://android.googleapis.com/packages/ota-api/package/435fc808f603bbc8a63ce30fd944676a65a61d6f.zip
Note: You should run these commands as soon as you get a notification that you have the update. If you leave it too long then the log file will roll over and you won't be able find the url.
wget -O /sdcard/oos-ota-update.zip <source address>
This pulls a copy of the file to /sdcard
Note: You could also just paste the URL into a browser to download the file
Find the active slot suffix: getprop ro.boot.slot_suffix
If the result is _a then the inactive slot suffix is _b otherwise it is _a
Restore active slot stock boot/recovery (recovery: only if TWRP is installed) using dd if=<copy of stock boot/recovery> of=/dev/block/by-name/<boot/recovery><active slot suffix>
Note: you could also use Magisk to restore the stock boot using Magisk>Uninstall Magisk>Restore images - this restores the stock boot image whilst keeping Magisk
Install the update using the appropriate local installer for your version of OOS and DO NOT reboot
Note that the OOS 13+ EU/IN local installer will first extract the update (and update the inactive slot partitions) and then prompt you to Install it. It is IMPERATIVE that you DON'T CLICK on Install at this point as it will finish the installation and reboot without prompting leaving you without root.
The local installer is:
OOS 11: System Update>Gear icon (local install)
OOS 12: MyApplication2 app (source: https://oxygenos.oneplus.net/English_20220225101104.apk; see https://forums.oneplus.com/threads/oxygenos-12-for-the-oneplus-8t.1555060/)
OOS 13+: On EU and IN Settings>About device>Software update>3-dot menu>Local install; to be advised on NA
Backup the new inactive slot stock boot/recovery (recovery: only if TWRP is installed) using dd if=/dev/block/by-name/<boot/recovery><inactive slot suffix> of=<new boot/recovery img>
Restore root to the current active slot dd if=<copy of current Magisk patched stock boot/recovery> of=/dev/block/by-name/<boot/recovery><active slot suffix>. This is so you keep root in case the update somehow fails and you're returned to the current system.
Note: You could also use Magisk>Magisk Install>"Direct Install (Recommended)"
(ONLY if keeping TWRP) Magisk>Modules>Install from storage: Select <twrp-installer.zip>
Magisk>Magisk Install>"Install to inactive slot" and DO NOT reboot
Backup the new Magisk patched stock boot using dd if=/dev/block/by-name/<boot><inactive slot suffix> of=<new Magisk patched boot img>
On OOS 11 and 12: Reboot. On OOS 13+ now tap on Install in the local installer to finish the installation.
C. A note on Magisk backup folders in /data​When Magisk patches a stock boot image using either Magisk>Magisk Install>"Direct Install (Recommended)", Magisk>Magisk Install>"Install to inactive slot", or is installed in TWRP, then it creates a backup of the stock boot image in a directory named /data/magisk_backup_<SHA1 of stock image>.
When you use Magisk>Uninstall Magisk>Restore images the backup corresponding to the current patched boot image is used to restore the stock image to the current (active) slot.
Clearly, if you deleted these magisk_backup directories then Magisk will not be able to restore the stock boot image. You must, therefore, always keep the current backup.
If you don't delete these backups you can end up with a lot of obsolete backups. So, how to work out which one is the one you need to keep?
The simplest way is to:
Restore the current stock boot image using Magisk>Uninstall Magisk>Restore images
Delete all the /data/magisk_backup_* directories
Restore the rooted boot image using Magisk>Magisk Install>"Direct Install (Recommended)" - this also creates a new magisk_backup directory (no need to reboot)

Great write up. I know some people will appreciate the info when they have that "freak out moment" and something goes slightly wrong.
My question/suggestion would be in regards to your A.2 step. But please, if both options work, my post can be ignored. As you and I discussed in another thread, the update process via TWRP while keeping root has always been, on previous OnePlus Android OS versions.
Download full ROM zip from OnePlus or other available location. I.E. 11.0.12.12
Create Nandroid backup.
Install full ROM zip.
Install TWRP.
Reboot to recovery.
Install Magisk.
Reboot to system.
Assuming it's a full update and not a delta. You outlined...
Manually download the update (from whichever source you use)
Boot recovery
Restore the stock boot and recovery that you backed up previously
Install the update
Boot bootloader
fastboot boot <twrp.img>
Backup current boot and recovery
Install Magisk-*.apk
Install twrp-installer.zip
Reboot system
As you stated, if full update, skip steps 3, 5, 6. Does changing the order and installing Magisk before TWRP allow you to not install TWRP 2x in order to keep the recovery and preserve root?
I used my outlined steps to update to 11.0.12.12 and it worked perfectly. Sorry if this post seems out of sorts, I'm doing it from my phone.

The Apostle said:
Great write up. I know some people will appreciate the info when they have that "freak out moment" and something goes slightly wrong.
My question/suggestion would be in regards to your A.2 step. But please, if both options work, my post can be ignored. As you and I discussed in another thread, the update process via TWRP while keeping root has always been, on previous OnePlus Android OS versions.
Download full ROM zip from OnePlus or other available location. I.E. 11.0.12.12
Create Nandroid backup.
Install full ROM zip.
Install TWRP.
Reboot to recovery.
Install Magisk.
Reboot to system.
Assuming it's a full update and not a delta. You outlined...
Manually download the update (from whichever source you use)
Boot recovery
Restore the stock boot and recovery that you backed up previously
Install the update
Boot bootloader
fastboot boot <twrp.img>
Backup current boot and recovery
Install Magisk-*.apk
Install twrp-installer.zip
Reboot system
As you stated, if full update, skip steps 3, 5, 6. Does changing the order and installing Magisk before TWRP allow you to not install TWRP 2x in order to keep the recovery and preserve root?
I used my outlined steps to update to 11.0.12.12 and it worked perfectly. Sorry if this post seems out of sorts, I'm doing it from my phone.
Click to expand...
Click to collapse
The problem is that delta updates require you to restore both recovery and boot partitions to stock otherwise the installation fails.
The process I describe works for both full and delta updates. But, like I said, if you know that the update is a full OTA, then you can simplify the process and, <edit>if you know it's always going to be a full update, then<end-edit> you can use your "usual" process.
PS: this is a source of confusion because the BA ROMs are always full updates, while the AA ROMs are typically delta updates.
So what works for one user will not work for another even though they are both running OOS on an 8T.
And then there's the difference between letting System update download and install versus manual install, which creates another place for confusion is you just talk about "install update" instead of being specific as to the exact method.

BillGoss said:
The problem is that delta updates require you to restore both recovery and boot partitions to stock otherwise the installation fails.
The process I describe works for both full and delta updates. But, like I said, if you know that the update is a full OTA, then you can simplify the process as per your "usual" process.
Click to expand...
Click to collapse
I guess I don't know why people wouldn't simplify the process, download the full ROM, and eliminate steps. It's worked for years on OnePlus devices across android 9, 10, and now 11.

The Apostle said:
I guess I don't know why people wouldn't simplify the process, download the full ROM, and eliminate steps. It's worked for years on OnePlus devices across android 9, 10, and now 11.
Click to expand...
Click to collapse
Because there's often no AA full rom to download. They can take months to show up while the delta is available immediately from Google.

I've never had that issue. Between XDA and OnePlus forums, someone has always posted a host link... Since OnePlus stopped around October.
Regardless, good info you posted.

The Apostle said:
I've never had that issue. Between XDA and OnePlus forums, someone has always posted a host link... Since OnePlus stopped around October.
Regardless, good info you posted.
Click to expand...
Click to collapse
Thanks. By the way I edited my first reply to you because your "usual" process only works if you are always using full updates.

Hi!
I'm using this method for the update:
Without TWRP
Manually download the update (from whichever source you use) to /sdcard
Magisk>Uninstall Magisk>Restore images - this restores the stock boot image whilst keeping Magisk
Install the update in System Update>Gear icon (local install)
Magisk>Magisk Install>Install to inactive slot
Reboot system
2nd point, if I tap on uninstall magisk, It tells me that I don't have a backup original boot image, how can I proced?
Thanks

Feduz said:
Hi!
I'm using this method for the update:
Without TWRP
Manually download the update (from whichever source you use) to /sdcard
Magisk>Uninstall Magisk>Restore images - this restores the stock boot image whilst keeping Magisk
Install the update in System Update>Gear icon (local install)
Magisk>Magisk Install>Install to inactive slot
Reboot system
2nd point, if I tap on uninstall magisk, It tells me that I don't have a backup original boot image, how can I proced?
Thanks
Click to expand...
Click to collapse
You can't proceed if your update is an incremental update. Otherwise you can go ahead.
You'll need to find a copy of the stock boot image to restore it before installing the incremental update.

BillGoss said:
You can't proceed if your update is an incremental update. Otherwise you can go ahead.
You'll need to find a copy of the stock boot image to restore it before installing the incremental update.
Click to expand...
Click to collapse
I'm on 11.0.11.11KB05BA, to 11.0.12.12. so I need to flash the original boot image via ADB/fastboot? Then proceed with point 3?

Feduz said:
I'm on 11.0.11.11KB05BA, to 11.0.12.12. so I need to flash the original boot image via ADB/fastboot? Then proceed with point 3?
Click to expand...
Click to collapse
You tell me. I use AA, not BA. If you don't know what type of update it is, then you need to replace stock using whatever method you like.

BillGoss said:
You tell me. I use AA, not BA. If you don't know what type of update it is, then you need to replace stock using whatever method you like.
Click to expand...
Click to collapse
It's a full update, about 2.8 GB. I'll flash the stock boot.img so

Feduz said:
It's a full update, about 2.8 GB. I'll flash the stock boot.img so
Click to expand...
Click to collapse
if it is a full update you don't need to restore anything before installing it.

Qnorsten said:
if it is a full update you don't need to restore anything before installing it.
Click to expand...
Click to collapse
Correct, I skipped this part in the first post. I've done the update and then installed via magisk. All went good. Thanks

What should I backup using TWRP before a custom rom update and before a jump from a custom rom to another?

rmroot said:
What should I backup using TWRP before a custom rom update and before a jump from a custom rom to another?
Click to expand...
Click to collapse
Read the TWRP OP posts for the answer.
[CLOSED] [No longer maintained] [RECOVERY] [11] [OFFICIAL] TeamWin Recovery Project (8T / Kebab) (2022-03-09)
Introduction: Team Win Recovery Project or TWRP for short, is a custom recovery built with ease of use and customization in mind. We started from the ground up by taking AOSP recovery and loading it with the standard recovery options, then added...
forum.xda-developers.com

@BillGoss
I will be a user of an OP 9R in a few days and I saw that it shares the same version of TWRP.
In the 9r forum I still haven't found a well explained tutorial and if it's possible.
The instructions you put here allow you to update OxygenOS on 8T and keep root/TWRP, right? Would they be applicable to the 9R as well?

lvints said:
@BillGoss
I will be a user of an OP 9R in a few days and I saw that it shares the same version of TWRP.
In the 9r forum I still haven't found a well explained tutorial and if it's possible.
The instructions you put here allow you to update OxygenOS on 8T and keep root/TWRP, right? Would they be applicable to the 9R as well?
Click to expand...
Click to collapse
I know that the 8T and 9R share similar architecture so the process I've described may work on the 9R, but I can't confirm this.
I do know that as one point we had a common TWRP version for both the 8T and 9R, but that's no longer the case and there's no official TWRP for the 9R.
So, from my perspective, you're on your own on this. If it works, great. You may want to post your process and results in the 9R forum, but not here (this is strictly an 8T forum and thread).

Thanks very much for this thread, @BillGoss. Just easily upgraded 11.0.12.12.KB05AA to 11.0.13.13.KB05AA with your methods using fastboot boot trwp.xx.img from bootloader mode and simply reinstalling Magisk after letting the update run (airplane mode on, as you suggest). I had just upgraded Magisk before the update, so had the latest apk handy in my downloads.
To backup your boot in TWRP (first know your active slot), you can get to a terminal in the TWRP/Advanced menu. I use the same commands you list in your "Use a CLI" instructions.

Hi, I've updated correctly to the latest OOS, should I need to update Magisk? or will be fine this version?

Right way to update rooted Oneplus 8 Pro

Hi everyone,
I'm running:
- Oneplus 8 Pro + latest Magisk
- Android 12, version C33
- I see there's an update to C35
I have Oxygen Updater which can be set to:
- incremental
- full updates (recommended for rooted phones)
I see a lot of threads here (some with conflicting info) about incremental, full updates, OTA updates if not via Oxygen Updater, Magisk flash to inactive slot, Magisk rooting normally, etc.
While reading all of them I got more or less confused
Can someone help me with an advice as to what would be the right way to upgrade from my C33 to C35 without ending up with a boot loop and a weekend of recovering my phone? (already had this 2 times and it was a horrific experience to go through)?
Do I download the full update with Oxygen Updater and then after install, without rebooting, go to Magisk and install to inactive slot?
Thank you!

skyraven83 said:
Hi everyone,
I'm running:
- Oneplus 8 Pro + latest Magisk
- Android 12, version C33
- I see there's an update to C35
I have Oxygen Updater which can be set to:
- incremental
- full updates (recommended for rooted phones)
I see a lot of threads here (some with conflicting info) about incremental, full updates, OTA updates if not via Oxygen Updater, Magisk flash to inactive slot, Magisk rooting normally, etc.
While reading all of them I got more or less confused
Can someone help me with an advice as to what would be the right way to upgrade from my C33 to C35 without ending up with a boot loop and a weekend of recovering my phone? (already had this 2 times and it was a horrific experience to go through)?
Do I download the full update with Oxygen Updater and then after install, without rebooting, go to Magisk and install to inactive slot?
Thank you!
Click to expand...
Click to collapse
Yes that would be correct. At least that's how I've done it before. But, as always, keep backups.

DrDominate said:
Yes that would be correct. At least that's how I've done it before. But, as always, keep backups.
Click to expand...
Click to collapse
Thanks! Will do.

Hello, Thank you for this information.
Is there any way to easily update to Android 13 without having to wipe data and lose root ?

DSwissK said:
Is there any way to easily update to Android 13 without having to wipe data and lose root ?
Click to expand...
Click to collapse
YMMV but this worked for me.
I used the "Oxygen Updater" app to download the F.62 (Android 13) Full OTA and flashed it using the local upgrade app from OnePlus (I have stock recovery). Make sure to re-install Magisk to inactive slot before rebooting.
After that l upgraded to F.63 (latest OTA) following these instructions:
Open Magisk Manager, select “Uninstall” and choose the “Restore Images” option. Magisk will restore your phone’s stock boot image that was backed up during the rooting process.
Now go to “Settings” → “System” → “System updates” and select “Download and Install Now” to install the OOS OTA update on your rooted phone.
After the update finishes, DO NOT REBOOT the phone. Since you restored the stock boot image, the root access will be lost if your reboot right now.
Now open Magisk Manager, press “Install” and select “Install to Inactive Slot (After OTA)” from the list of available methods.
Finally, select “Let’s Go” to confirm and install Magisk to the inactive slot (where the OxygenOS OTA has been installed).
After Magisk is installed, reboot your phone by pressing the ‘Reboot’ button.
Click to expand...
Click to collapse
I don't know if the first step was necessary or not... anyway my data was all intact afterwards. Probably best to back up anything important just in case!

Hello,
Thank you so much. Great news, it worked for me too ! In case someone wants to do the same, here's the procedure that worked for me :
I used the "Oxygen Updater" app to download the F.63 (Android 13) Full OTA and flashed it using the local upgrade app from OnePlus (I also have stock recovery). I re-installed Magisk to inactive slot before rebooting.
Click to expand...
Click to collapse

F63 update fails when rooted and OrangeFox

My phone perpetually "suggests" me to update to F63.
> OP8Pro with F13, OrangeFox and root.
> Build number IN2023_11_F.13.
> Magisk
> OrangeFox for FB1
I enabled "Automatic updates" and OFox set up to allow OTA.
Yet any attempt to update to F63 results in "Could'n update. Installation problem".
Any ideas? Any logs to loot at?
Thanks in advance

sms2000 said:
My phone perpetually "suggests" me to update to F63.
> OP8Pro with F13, OrangeFox and root.
> Build number IN2023_11_F.13.
> Magisk
> OrangeFox for FB1
I enabled "Automatic updates" and OFox set up to allow OTA.
Yet any attempt to update to F63 results in "Could'n update. Installation problem".
Any ideas? Any logs to loot at?
Thanks in advance
Click to expand...
Click to collapse
Pretty sure you can't OTA update OOS with any custom recovery, and you can't update at all while rooted.
From a guide I found elsewhere:
Open Magisk Manager, select “Uninstall” and choose the “Restore Images” option. Magisk will restore your phone’s stock boot image that was backed up during the rooting process.
Now go to “Settings” → “System” → “System updates” and select “Download and Install Now” to install the OOS OTA update on your rooted phone.
After the update finishes, DO NOT REBOOT the phone. Since you restored the stock boot image, the root access will be lost if your reboot right now.
Now open Magisk Manager, press “Install” and select “Install to Inactive Slot (After OTA)” from the list of available methods.
Finally, select “Let’s Go” to confirm and install Magisk to the inactive slot (where the OxygenOS OTA has been installed).
After Magisk is installed, reboot your phone by pressing the ‘Reboot’ button.

Nimueh said:
Pretty sure you can't OTA update OOS with any custom recovery, and you can't update at all while rooted.
From a guide I found elsewhere:
Open Magisk Manager, select “Uninstall” and choose the “Restore Images” option. Magisk will restore your phone’s stock boot image that was backed up during the rooting process.
Now go to “Settings” → “System” → “System updates” and select “Download and Install Now” to install the OOS OTA update on your rooted phone.
After the update finishes, DO NOT REBOOT the phone. Since you restored the stock boot image, the root access will be lost if your reboot right now.
Now open Magisk Manager, press “Install” and select “Install to Inactive Slot (After OTA)” from the list of available methods.
Finally, select “Let’s Go” to confirm and install Magisk to the inactive slot (where the OxygenOS OTA has been installed).
After Magisk is installed, reboot your phone by pressing the ‘Reboot’ button.
Click to expand...
Click to collapse
My Magisk states there is no preserved stock image. I remember it was backuped during the installation. Very strange.
Anyway where can I have the F13 boot.img?

sms2000 said:
My Magisk states there is no preserved stock image. I remember it was backuped during the installation. Very strange.
Anyway where can I have the F13 boot.img?
Click to expand...
Click to collapse
I've uploaded my stock OP8Pro_EU_IN2023_F.13_boot.img to GDrive for you ... please let me know when you've grabbed it so I can delete the file