stuck on com.android.systemui has stopped working - Xiaomi Redmi 3s Questions & Answers

i recently made a change to system/build.prop file to display navbar after that the error is there continuously and i can't use my phone besides pressing cancel and report

kpant said:
i recently made a change to system/build.prop file to display navbar after that the error is there continuously and i can't use my phone besides pressing cancel and report
Click to expand...
Click to collapse
Dirty flash your rom

Related

[Q] Changed density - now its looping!

Hi, i was playing around with the density changer app, and ofcourse i wanna try to see how it looked at 100, after a did that, it took a bit to boot then it just showed the desk and started all over again, and now its just restarts all the time, but it just shows me the samsung logo, and after like 5 min of restarts the desk appears again but it dissapear after 4 sec so i have no chance to let it load up and acces the meny to start the app and change. what to do?
i know its my own fault, just gut it from my girlfriend so.
regards jonny
Access recovery then reformat.
Sent from my SGH-T849 using XDA App
Does it still do it after a coldboot? (hold power button until it turns off fully, then reboot)
If so, then you've managed to set it in the build.prop file, if you can get to it (adb shell or adb pull/push), you can edit /build.prop on the device and change the 100 value back to 240.
I don't think a "factory reset" will reset the build.prop file, in which case the alternative would be a complete reflash.
knightnz said:
I don't think a "factory reset" will reset the build.prop file, in which case the alternative would be a complete reflash.
Click to expand...
Click to collapse
Actually if I remember correctly, it does reset build.prop.
Thanks all for the answers, i was trying all the 3 buttons way to get into a form of loaders even the force upload one before i was in here.
But then i pluged in the cable from the computer and started the tab and when it had load up everything, everything was fine:S
If someone has the same problem try that, dunno why it would work but it did.

[Q] LG Optimus L3 E405 Recovery Dead?

Hello,
This morning I tried to root my phone so that I can force everything to be moved to a sd card since the storage of the system is low not enough to install apps and to install A mod that is more updated then the current GingerBread OS.
I managed to soft brick the device the rom clearly said e405 obviously the developer has a few bugs anyway I manage to recover from my soft brick by A software 'KDZ' Only issue I have now is when I press volume up on boot I get A notice icon trying to say something (image of the icon is attached below) and when I use ROM Manager to reboot to recovery it will attempt to go there, Instead of going to recovery it goes to A loading page then this erases all my data/apps except SuperUser/Root.
Tried everything and it still does it?
When I use the LG Emergency Software it just goes to a page saying not responding??
Any help and ideas would be grateful so I can fix this issue and move on also im mostly A samsung user and im fairly new to lg.
See thee error message below
Once i get the idea of what the icon is actually trying to say I should be in the right direction.
Thanks,
Spudster
umm
Anyone??
Spudster1 said:
Anyone??
Click to expand...
Click to collapse
Perhaps you can go to ROM Manager, uninstall Recovery, then re-install it?
I don't really know. I'm sorta new to this stuff.
hard reset
Spudster1 said:
Hello,
This morning I tried to root my phone so that I can force everything to be moved to a sd card since the storage of the system is low not enough to install apps and to install A mod that is more updated then the current GingerBread OS.
I managed to soft brick the device the rom clearly said e405 obviously the developer has a few bugs anyway I manage to recover from my soft brick by A software 'KDZ' Only issue I have now is when I press volume up on boot I get A notice icon trying to say something (image of the icon is attached below) and when I use ROM Manager to reboot to recovery it will attempt to go there, Instead of going to recovery it goes to A loading page then this erases all my data/apps except SuperUser/Root.
Tried everything and it still does it?
When I use the LG Emergency Software it just goes to a page saying not responding??
Any help and ideas would be grateful so I can fix this issue and move on also im mostly A samsung user and im fairly new to lg.
See thee error message below
Once i get the idea of what the icon is actually trying to say I should be in the right direction.
Thanks,
Spudster
Click to expand...
Click to collapse
I saw that icon after flashing back to stock rom with KDZ and a hard reset worked for me. Pull the battery, make sure you not connected to USB or charger, then press and hold home key and down volume while you press power on. Release power when you see LG logo, hold the down and home for a while until you see android unpacking a box. It takes about a minute to see this, so you gotta wait for it. The phone reboots or shut downs, don't rememberwhich
reply
kurtstraker said:
I saw that icon after flashing back to stock rom with KDZ and a hard reset worked for me. Pull the battery, make sure you not connected to USB or charger, then press and hold home key and down volume while you press power on. Release power when you see LG logo, hold the down and home for a while until you see android unpacking a box. It takes about a minute to see this, so you gotta wait for it. The phone reboots or shut downs, don't rememberwhich
Click to expand...
Click to collapse
Ok I will try that and let you know if it works in a few hours I gave the phone to my brother for free since I bought A samsung (used to samsungs and love then
Anyway should also mention that when I try to reboot into recovery with rom manager it reboots goes to the loading box thing then it wipes my data Like i said I tried that method in a few hours and get back to you here.
nope
didn't work ;.(
Man go to the screen u have posted the images above , then use KDZ to flash back Man!
This is "DIAG MODE" so select it in KDZ program
So select KDZ file ( download if u have tried urs so far)
No error .. when u click to start upgrade ur phone will apper in emergency mode. Then the KDZ will flash flawslessly
Sent From ... Lg e400 <-- {[Brasilian Here]}
Still didnt work it flash though but still didnt fix the recovery..
These lg are actually useless a simple firmware flash should do the job.
LG staff are also rude to be honest rang up and because I tried to root and I was doing the right thing going back to stock they denied support and hang up without me giving A reply. Glad ive switched back to samsung s4 and Apple IPhone 5C.
Thanks for attempting to help :.)

[Q] Changed DPI to 200. Phone bugged out.

Well today I went full retard and decided to modify the build.prop and change the DPI to 200 from 480. Now whenever I turn on my phone it alternates between two pop ups taking up the whole screen. One of them says "unfortunately, the process com.android.systemui has stopped" and the other says "unfortunately, touchwiz home has stopped". I cant do anything on my device apart from changing the volume and pressing "OK" on the messages. I have access to the stock firmware but I dont particularly want to wipe my phones data. I have already tried using adb but cannot as the authorization window wont appear on my phone, meaning that my device remains unauthorized. I was hoping that someone here could provide me with a solution to this problem. Would it be possible to somehow extract the stock build.prob from the stock firmware and flash it onto my device?
Thanks in advance

Build prop editing help!

Before I start: The info. SM-G530AZ still on 4.4.4. KitKat. Rooted. Basically I was being stupid and decided to change my lcd density from 200 to 160 or 180 i cant remember when i rebooted it says "Unfortunately the process com.android.systemui has stopped" everytime i press ok 3 seconds later it comes back up nothing happens when i press the apps on the home screen the app drawer doesnt work the notification bar doesnt work. The only things ive seen work holding the power button down and changing sound. ive heard about adb but not sure if it will work because my phone doesnt display whenever i connect it to my computer any flashables or alternate fixes would help plz i need this UPDATE i have adb but it wont work when i try to pull the file it is connected though

OP5 kind of dead

Hello,
no matter what I flash (even stock), after I enter my SIM-Pin, the screen just turns black, but I see the power-menu when I hold the button and the statusbar with blinking wallpaper when pressing back-button.
Any help?
Thanks!
Hecke92 said:
Hello,
no matter what I flash (even stock), after I enter my SIM-Pin, the screen just turns black, but I see the power-menu when I hold the button and the statusbar with blinking wallpaper when pressing back-button.
Any help?
Thanks!
Click to expand...
Click to collapse
Maybe need more information.
Are you on stock or rooted on costum rom? If so what rom, kernel etc
Thanks, but as stated before:
It doesn't matter, went back to full stock, but same problem...
I wanted to flash new rom in the morning and it kept saying system-partition is busy.
Hecke92 said:
Thanks, but as stated before:
It doesn't matter, went back to full stock, but same problem...
I wanted to flash new rom in the morning and it kept saying system-partition is busy.
Click to expand...
Click to collapse
Idk, I had the same problem where I would clean flash everything and install a new fully stock OOS ROM and it used to take me to the security thing and I input my PIN and it just used to go black and reboot the system, and sometimes not boot at all.
I then either used this <https://forum.xda-developers.com/attachment.php?attachmentid=3761904&d=1464187934> or I changed the file system to Ext4.
I'd rather you try the zip out first. It'll work. I'm 98% sure I used it. Although to save my butt I take zero responsibility of your actions lol.
same as mine
mine is also becoming black screen today, yesterday i was on reading mode and i saw some marks on the corner red, then today totally black. try to flash or reboot it 50 times but still the same.
i flash using msm download woke up abut the screen is blinking then stopped again
Connect to PC with fastboot
fastboot format system
fastboot format cache
Reboot into recovery and flash a new ROM.
???
Profit!

Categories

Resources