Database Users

HTC surround enter usb host mode after unlock by XTC clip

HTC surround T8788 AT&T enter usb host mode after unlock by XTC clip.please help me.Thanks.

Just reflash your phone.

eglunas said:
Just reflash your phone.
Click to expand...
Click to collapse
i flash RUU_Surround_TELUS_WWE_1.04.661.00_Radio_5.51.09.29_22.32.50.10U_by_ansar
but error 294 : invalid vender ID.i need rom at&T please help.

Here is the At&t ROM its the original 7.7004
http://www.megaupload.com/?d=KY9UZEHI
(Charge Battery to 100%)
With the phone powered off hold volume down and power button to boot into Bootloader screen (Red Blu Green White),plug in usb cable to computer and into the phone(it will say "serial" at the bottom ( let it install the qualcomm cdma driver) Then "serial" will change to "USB" at the bottom of the phone screen, extract the ROM.zip file from download link above and click the Rom update utility EXE and follow the instructions from there.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Ok I need you help please, I have the same problem with my htc 7 surround of AT&T, but I didn´t use the tool "unlock by XTC clip". My phone worked well, but the last week, it freezing in the logo "HTC" and don´t pass from here; it do not start wp7.
I use this tool that you give from megaupload but when the program verify the image version of my htc - it is in blank, my phone phone don´t have image version- I don´t know what I have to do. I use everything to install a new windows phone 7 operating system to my htc surround.
please give me a response...

i need this file but link not working again. says file might have been deleted
waiting for your response.

I need this file but link not working again. Thanks in Advance... Kamijee

deleted

[SPLASHSCREEN] Unofficial XDA Developers Splashscreen!

480 BY 800 DEVICES ONLY! IF YOU DON'T KNOW WHAT YOUR DEVICE RESOLUTION IS THEN FIND OUT BEFORE YOU INSTALL
***you will need to be rooted and have S-OFF***
I AM NOT RESPONSIBLE FOR ANYTHING THAT HAPPENS TO YOUR DEVICE... FOLLOW MY INSTRUCTIONS AT YOUR OWN RISK, IF YOU CAN'T READ ITS NOT MY FAULT
Click to expand...
Click to collapse
INSTRUCTIONS for the htc evo shift 4g you can skip to step 4
step 1. download the splash1.img to your desktop, DONT RENAME
step 2. find the android-info.txt file for your device, every device is different.. example -
Code:
modelid: PG0610000
cidnum: SPCS_001
mainver: 2.72.651.2
hbootpreupdate:12
DelCache: 1
DelUserData: 0
step 3. take the splash1.img and android-info.txt and compress them into a .zip file and name it with your device name. example- PG06IMG.zip (htc evo shift)
step 4. take the .zip file (evo shift .zip is in attachments) and drag it to the root of your sd card. the next part is the same as restoring with a RUU, boot into your bootloader and it should automatically ask you if you want to install a update, say yes, or volume up.
done.
if you did something wrong then you didin't follow directions, if the image is distorted and layered then your device isn't 480x800

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
heres a screenie, its lower resolution then it is on the phone, aka it looks better then this
>>> http://www.flickr.com/photos/[email protected]/6030482463/

INSTALLING BACK TO STOCK:
find a stock 480x800 htc stock splash screen, convert it to a .bmp file, then use nbimg tool to convert to a .img, then just compress into a .zip and install through your bootloader

ive been waiting for this thanks, so this would work on all 480x800 android phones

Yes, I've created the image all you have to do is compress it with your phones android-info.txt
No I'm not using Tapatalk... I'm using the XDA Premium app, cause I got balls.

A way to unlock hardbricked Meizu Pro 5 ?

Hi,
I've hard bricked my Pro 5. No recovery access, no boot to rom, locked bootloader. After many search i see this : https://forum.xda-developers.com/meizu-pro-5/how-to/meizu-customer-service-flash-tools-save-t3447678, but this is bull-****.
I test many manipulations to get something on my phone other than "Bootloader, Locked".
So i dicovered this : Press and holp Vol + and Vol - and press one time power button. We get this :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
After research about this, we get this :
http://forum.gsmhosting.com/vbb/f777/galexy-s6-exynos-7420-dead-1975230/#post12369382
And this :
http://www.mediafire.com/file/9qmezaezy1fyzrr/Galaxy_S6_Boot_recovery.pptx
Possible way to unlock hardbricked Pro 5 ?
Same way exist for Qualcomm Processor : http://www.androidbrick.com/unbrick...-have-the-right-kind-of-rom-qhsusb_dload_edl/

Subscribed, i do also have a spare "bricked" device

same problem here bro.tried everything..only mode available is fastboot and locked bootloader.in pc device manager i get unknown android 1.going to investigate the problem futher more.pls keep us in touch.tnx

barbonee said:
same problem here bro.tried everything..only mode available is fastboot and locked bootloader.in pc device manager i get unknown android 1.going to investigate the problem futher more.pls keep us in touch.tnx
Click to expand...
Click to collapse
Hey there. Got the same problem. Tried everything. Nothing happens. Have you got your problem solved yet?

The same problem
Sent from my PRO 5 using Tapatalk

Only way to solve this is taking the phone to technical service. Done it myself. Be careful tought, they will try to make you change the entire mother board (280€), but if you insist they will "find a way" to install the correct software in your phone and leave it as if it was new

it is possible to recovery via dongle ... but sn and imei can be lost

Try this thread.
https://forum.xda-developers.com/me...hard-bricked-lost-t3838461/page2#post79752427
Try this thread; it worked perfectly for me.

zenfone 5 completely dead phone, only CloverviewPlus detected, no USB logo

My phone is completely dead when I'm flashing RAW file using ASUS Flash Tool. Cannot do anything except pressing volume down and power to bring it to Cloverviewplus mode.
Flashing it with xFSTK also didn't work.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It will end with Timeout to detect the device.
HELP please!

Use this link https://forum.xda-developers.com/zenfone-5/help/debrick-asus-zenfoen-5-fastboot-t3377455
But don't use (3. Dowload and install iSocUSB driver: http://www.mediafire.com/download/7u...etup-1.0.4.exe).
Download iSocUSB-Driver-Setup-1.7.0.

what did you mean? forget step 3??
Tran Xuan Thuy said:
Use this link https://forum.xda-developers.com/zenfone-5/help/debrick-asus-zenfoen-5-fastboot-t3377455
But don't use (3. Dowload and install iSocUSB driver: http://www.mediafire.com/download/7u...etup-1.0.4.exe).
Download iSocUSB-Driver-Setup-1.7.0.
Click to expand...
Click to collapse
so you mean don't use step 3???
i'm stuck in file debrick.bat the massage is "isoc detecting device fail #attemp 0
than reconecting -- debrick.bat force close
what the problem?

1. Use the instructions at the link https://forum.xda-developers.com/zen...tboot-t3377455
2. But don't use (3. Dowload and install iSocUSB driver: http://www.mediafire.com/download/7u...etup-1.0.4.exe).
Dowload and install iSocUSB-Driver-Setup-1.7.0. (because iSocUSB-Driver-Setup-1.7.0 is the newer than iSocUSB-Driver-Setup-1.0.4 )
If you dowload and install iSocUSB-Driver-Setup-1.0.4 in windows 10, you stuck in file debrick.bat the massage is:
isoc detecting device fail #attemp 0
isoc detecting device fail #attemp 1
........
isoc detecting device fail #attemp 19
and close command prompt windows.
---------- Post added at 07:10 AM ---------- Previous post was at 06:52 AM ----------
You need to check if your PC has received your phone in cloverview mode.
Open Computer Management -> Device Manager - > Intel Soc : CloverviewPlus Device and Intel Soc USB Device.

Please help me for apgrade or root 8227L_demo

Hello my friends. I have an android hand unit like the one on the link.
https://www.aliexpress.com/item/33035372080.html?spm=a2g0s.9042311.0.0.25a64c4dPPWPHj
I need to do firmware update οr to rout this HU.
Here's a difference in the model's name... The factory information is different from the CPU-Z information.
The seller of course does not help. He forcefully responds to messages and does not understand.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I only ask you 2 things.....Do a firmware upgrade or root the device.
The main problem is the radio application. While I have English as my primary language, the radio only holds Polish and does not have a good signal.
Please Help me

any help?

Look for this instruction in 4pda.ru forum https://4pda.ru/forum/index.php?showtopic=936535&st=11880
Easy! For some reason, it is not described in detail and simply here.
I will try:
- download our scatter file to the computer (laptop);
- Download FlashTool with SP_Driver_v2.0 (firewood) and install on the computer (laptop);
- Download SuperSU.zip and throw in the root of the body;
- Download Android Terminal and install on the body;
- Download also TWRP, this one came up to me, the rest mirrors;
- rename TWRP to recovery.img - this is important!
- we throw recovery.img next to our scatter file;
- open FlashTool, load our scatter file, see that the checkmark is only on recovery! ;
- further according to the scheme as described on the forum - click Download, connect the switched off body and wait for success!
Success will be, of course, if the firewood is already standing and the dad-dad cord is whole.
- Now you need to reboot into recovery. to do this, turn on the body, launch Android Terminal, give the reboot recovery command;
- from TWRP we put zip SuperSU;
- ALL! We reboot and rejoice.
I hope it turned out simple and clear. Good luck!
Click to expand...
Click to collapse

Can I switch to a different luacher or operating system?