Lately I've been getting this error on every boot on all custom roms. It never happened before. Here's the screenshot of it. I've rolled back to stock lollipop rom for now. Anyone know what is this about ?
Have you tried flash polish v20b and wipe again?
AgussVicious said:
Have you tried flash polish v20b and wipe again?
Click to expand...
Click to collapse
Yes, I've done that but still after that i get this error. It started happening all of a sudden, never happened before.
AgussVicious said:
Have you tried flash polish v20b and wipe again?
Click to expand...
Click to collapse
As far as i know flashing the modem of v20b does the job as well, right?
mayankjet said:
As far as i know flashing the modem of v20b does the job as well, right?
Click to expand...
Click to collapse
I don't know
AgussVicious said:
I don't know
Click to expand...
Click to collapse
Thanks, anyway. Fixed it for now. Gone back to nougat.
mayankjet said:
Thanks, anyway. Fixed it for now. Gone back to nougat.
Click to expand...
Click to collapse
Can I know how you fixed it?
pvineeth97 said:
Can I know how you fixed it?
Click to expand...
Click to collapse
Sorry, ?
Back then a pulling out the battery and rebooting it again fixed it, but It happened again. It happens on all of the custom ROMs. The only solution is to roll back to lollipop ROM. It even happens on stock marshmallow ROM.
pvineeth97 said:
Can I know how you fixed it?
Click to expand...
Click to collapse
BTW, can I know how did you run into this error ? I think it happens to me because of a broken WiFi chip. WiFi on my phone doesn't work, doesn't scan any WiFi networks and neither the hotspot works. It turns on but doesn't show up in other phone.
mayankjet said:
BTW, can I know how did you run into this error ? I think it happens to me because of a broken WiFi chip. WiFi on my phone doesn't work, doesn't scan any WiFi networks and neither the hotspot works. It turns on but doesn't show up in other phone.
Click to expand...
Click to collapse
I am working on Oreo for LGE msm8916 like LG K10, LG G4c devices. It boots and fixing the wcnss error too.
pvineeth97 said:
I am working on Oreo for LGE msm8916 like LG K10, LG G4c devices. It boots and fixing the wcnss error too.
Click to expand...
Click to collapse
Well, nice to hear that. Maybe, we'll get it too somewhere in the future.
Related
Hi, I just need some input about the WifiKill app. I have used this before a lot of times with my other devices but on my stock(obviously rooted) Note 3, I can't seem to see anyone when I scan. I made sure my other device was connected and then scanned for it but nothing. No devices found. Is anyone else experiencing this?
If so, do you have any solution for it? Thanks!:laugh:
Graffiti Exploit said:
Hi, I just need some input about the WifiKill app. I have used this before a lot of times with my other devices but on my stock(obviously rooted) Note 3, I can't seem to see anyone when I scan. I made sure my other device was connected and then scanned for it but nothing. No devices found. Is anyone else experiencing this?
If so, do you have any solution for it? Thanks!:laugh:
Click to expand...
Click to collapse
Mine works on 4.4.2 X-Note.
Did you download the latest version from the XDA thread?
http://forum.xda-developers.com/showthread.php?t=1282900
You have to download the Wifikill Downloader and it will verify your purchase there.
nicholaschum said:
Mine works on 4.4.2 X-Note.
Did you download the latest version from the XDA thread?
http://forum.xda-developers.com/showthread.php?t=1282900
You have to download the Wifikill Downloader and it will verify your purchase there.
Click to expand...
Click to collapse
I have the latest premium one. :|
Graffiti Exploit said:
I have the latest premium one. :|
Click to expand...
Click to collapse
That's weird then. What firmware are you on?
nicholaschum said:
That's weird then. What firmware are you on?
Click to expand...
Click to collapse
It didn't work on my stock rooted firmware before NF4. I flashed NF4 and JackAway ROM and now it works. Lol. Thanks for the replies anyway.
Graffiti Exploit said:
It didn't work on my stock rooted firmware before NF4. I flashed NF4 and JackAway ROM and now it works. Lol. Thanks for the replies anyway.
Click to expand...
Click to collapse
Great. Glad you got it working!
Happy kicking!
Same problem here
My wifikill isn't working now. It was working fine till I tested ARP guard on my Wifi. I reset it twice and reconfigured it Still Its not working. Same problem occurred with an another phone too.
Hi
Got a Nexus 6p from google. I have flashed Purenexus and ElementX kernel onto it.
Work well except, I am on optus and in some areas ( Central Station, Burwood station, some places around CBD), I loose connectivity.
So typically I lose data access - so games stop etc etc. I have data show up when its Rx/Tx. so I can see. still says I have 5 bars but no data
Usually the only way to fix this is to goto airplane mode and then come back out.
This is a real pain. I don't remember having this problem on telstra.
So I thought maybe I don't have the right modem firmware (what am i supposed to call it ?).
How can I check what version i have
And can any one recommend a newer / better / latest one that should work with optus ???
KeyzerSuze said:
Hi
Got a Nexus 6p from google. I have flashed Purenexus and ElementX kernel onto it.
Work well except, I am on optus and in some areas ( Central Station, Burwood station, some places around CBD), I loose connectivity.
So typically I lose data access - so games stop etc etc. I have data show up when its Rx/Tx. so I can see. still says I have 5 bars but no data
Usually the only way to fix this is to goto airplane mode and then come back out.
This is a real pain. I don't remember having this problem on telstra.
So I thought maybe I don't have the right modem firmware (what am i supposed to call it ?).
How can I check what version i have
And can any one recommend a newer / better / latest one that should work with optus ???
Click to expand...
Click to collapse
What build are you on? You can check this in the About Phone section of Settings.
Heisenberg said:
What build are you on? You can check this in the About Phone section of Settings.
Click to expand...
Click to collapse
Build - MTC19T
Pure - 6.0.1-20160506-CMTE
baseband - .2.6.1.c4-00008-m8994faaaanazm-1
KeyzerSuze said:
Build - MTC19T
Pure - 6.0.1-20160506-CMTE
baseband - .2.6.1.c4-00008-m8994faaaanazm-1
Click to expand...
Click to collapse
You're on a previous build but that shouldn't really matter. Was this occurring while the phone was fully stock? What was the last stock build you were running?
Heisenberg said:
You're on a previous build but that shouldn't really matter. Was this occurring while the phone was fully stock? What was the last stock build you were running?
Click to expand...
Click to collapse
I believe so. Been running pure for quite a while.
I think I am missing the last patch ..
KeyzerSuze said:
I believe so. Been running pure for quite a while.
I think I am missing the last patch ..
Click to expand...
Click to collapse
If you want to be sure you're on the latest baseband I have it here:
https://www.androidfilehost.com/?fid=24572369242687096
Flash it with fastboot:
Code:
fastboot flash radio radio-angler-angler-03.67.img
(Put it in your fastboot folder first)
Heisenberg said:
If you want to be sure you're on the latest baseband I have it here:
https://www.androidfilehost.com/?fid=24572369242687096
Flash it with fastboot:
Code:
fastboot flash radio radio-angler-angler-03.67.img
(Put it in your fastboot folder first)
Click to expand...
Click to collapse
Thanx
KeyzerSuze said:
Thanx
Click to expand...
Click to collapse
Had that helped at all?
Heisenberg said:
Had that helped at all?
Click to expand...
Click to collapse
Sorry haven't had a chance to try. Just saying thanks for the link. Erik report back after I flash it
Sent from my Nexus 6P using Tapatalk
KeyzerSuze said:
Sorry haven't had a chance to try. Just saying thanks for the link. Erik report back after I flash it
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
No worries, let me know how you go.
Heisenberg said:
No worries, let me know how you go.
Click to expand...
Click to collapse
Hi
Okay I have flashed it. Thought afterwards where do I get my old firmware from ! ... is there a place to get these file from.
I will run for a week and will see how it goes.
Thanks
KS
KeyzerSuze said:
Hi
Okay I have flashed it. Thought afterwards where do I get my old firmware from ! ... is there a place to get these file from.
I will run for a week and will see how it goes.
Thanks
KS
Click to expand...
Click to collapse
I have links to every full build, bootloader, radio, and vendor in my index:
http://forum.xda-developers.com/nexus-6p/general/index-huawei-nexus-6p-t3213583
Heisenberg said:
I have links to every full build, bootloader, radio, and vendor in my index:
http://forum.xda-developers.com/nexus-6p/general/index-huawei-nexus-6p-t3213583
Click to expand...
Click to collapse
Hi
So been running for a few days think its a bit better ... very subjective.
But definitely no worse ...
thanks
KS
KeyzerSuze said:
Hi
So been running for a few days think its a bit better ... very subjective.
But definitely no worse ...
thanks
KS
Click to expand...
Click to collapse
Well that's good I guess.
Well i would have to say better - it doesn't happen as much. but still when it happens it seems to be worse ...
still i think a step in the right direction
thanks
KeyzerSuze said:
Well i would have to say better - it doesn't happen as much. but still when it happens it seems to be worse ...
still i think a step in the right direction
thanks
Click to expand...
Click to collapse
Question is there a newer radio.
I find my data drops when I receive a call .. don't think that did that before
Download: http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FW8D9K47526NAO5812C1D5V/D85530n_00_0816.kdz
Security Patch Level 08.01.16
Enjoy
Montechristo said:
Enjoy
Click to expand...
Click to collapse
I'd love to, but unfortunately/inexplicably, low power bluetooth still does not work as it used to (garage opener app won't establish BT connection), so I'll have to go back to 30b again - for the fourth time.
Flashed this. Now stuck, LG won't see my device information when trying to flash tot or kdz. Solution? When i had twrp i flashed back the 5.0 boot and worked but now i can't use kingroot on v30n.... help please
Later Edit: http://forum.xda-developers.com/showpost.php?p=64624353&postcount=3 this saved me! tHANKS GUYS!
autorec ?
Montechristo said:
Download: http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FW8D9K47526NAO5812C1D5V/D85530n_00_0816.kdz
Security Patch Level 08.01.16
Enjoy
Click to expand...
Click to collapse
thanks for the link, but I am still unable to download. I've also tried the links on the OP, same issue.
grymmy said:
thanks for the link, but I am still unable to download. I've also tried the links on the OP, same issue.
Click to expand...
Click to collapse
Try different web browser.
grymmy said:
thanks for the link, but I am still unable to download. I've also tried the links on the OP, same issue.
Click to expand...
Click to collapse
Added again "http://" on search bar address
from yesterday on my phone..
fOxunO said:
Added again "http://" on search bar address
Click to expand...
Click to collapse
adding the "http://" worked...didn't try using another browser but thanks a million guys...
one more question, root and TWRP working on this latest firmware?
thanks in advance
With the V30N version Kingroot can not apply the root.
I'm trying other solutions ....
pippo45454 said:
With the V30N version Kingroot can not apply the root.
I'm trying other solutions ....
Click to expand...
Click to collapse
Let us know if you find something..
pippo45454 said:
With the V30N version Kingroot can not apply the root.
I'm trying other solutions ....
Click to expand...
Click to collapse
Kingroot doesn't work because of new security patches. We need a new version of Kingroot.
Letter of version just have geographic signification, no ?
Because there is V30B with latest Android path ?
Correct.
phony_user said:
I'd love to, but unfortunately/inexplicably, low power bluetooth still does not work as it used to (garage opener app won't establish BT connection), so I'll have to go back to 30b again - for the fourth time.
Click to expand...
Click to collapse
did you root phone and install twrp ? if yes - that could be the problem
Anyone have noticed RIL problems whit this build?
No problem at the moment, but i can't root this new sw version.... King root doesn't funtcion,,,,,
Since this is for European D855 model, there should not be any problems flashing on the international G3 right?
jtrvk said:
Since this is for European D855 model, there should not be any problems flashing on the international G3 right?
Click to expand...
Click to collapse
I'm in EU, but my G3 is for ARE region (Emirates). I installed V30n and there is warning about region after reboot, but everything works and there is no problems.
Installed it on my T-Mobile DE lg g3
After phone finishes booting up, warning message: current version is not available for user. Can't find matched cust for NT-code mcc/mnc[26201], subset[FF]
Message goes away if you click any ware on the screen
But still the major wi-fi problems with randoms disconnects and turning itself off when screen is also off, is still not resolved.
Hello guys,
I have this problem. After I updatet to Nougat and I did factory reset, I have no information when I go to the updater and tap on the firmwire number. Anyone maybe know what causes this and could be this because I have changed my language and region? Should be worried?
Thanks in advance.
That looks normal to me. It was the same under B160 and now on B370.
Einherjer* said:
That looks normal to me. It was the same under B160 and now on B370.
Click to expand...
Click to collapse
You got original OTA update even though it were saying 'no information' or you were using firmware finder? I'm afraid OTA updater doesn't work properly. And do you know what is the reason for this to be caused?
Marko5 said:
You got original OTA update even though it were saying 'no information' or you were using firmware finder? I'm afraid OTA updater doesn't work properly. And do you know what is the reason for this to be caused?
Click to expand...
Click to collapse
Yes, got official OTA. There was no Information on the Firmware before, on B160. So it realy doesn't matter, because nothing screwed up. Don't worry about that, if everything else working fine.
Einherjer* said:
Yes, got official OTA. There was no Information on the Firmware before, on B160. So it realy doesn't matter, because nothing screwed up. Don't worry about that, if everything else working fine.
Click to expand...
Click to collapse
Thank you. I thought I screwed something up, uh.
Marko5 said:
Thank you. I thought I screwed something up, uh.
Click to expand...
Click to collapse
I'm not sure, but i dont't think so.
Einherjer* said:
I'm not sure, but i dont't think so.
Click to expand...
Click to collapse
Well, then ok. Thanks anyway.
New update https://xpericheck.com/device/G8141
236MB OTA
July security patch and not much more as far as I can see.
Thanks for the information! Just updated with flashtool and it looks like, the bootloader got an update with this version. The Warning image at the start changed a bit...
the_brad said:
Thanks for the information! Just updated with flashtool and it looks like, the bootloader got an update with this version. The Warning image at the start changed a bit...
Click to expand...
Click to collapse
Took one more second
Haha
I am jocking
I am downloading now
But i think nothing new
July security
What's about DRM fix on this firmware?
michnow said:
What's about DRM fix on this firmware?
Click to expand...
Click to collapse
We have to wait
michnow said:
What's about DRM fix on this firmware?
Click to expand...
Click to collapse
It works, if you add a line for that firmware version manually in xperifix. I have done so and everything works fine.
the_brad said:
It works, if you add a line for that firmware version manually in xperifix. I have done so and everything works fine.
Click to expand...
Click to collapse
Some quick tutorial?
Anybody know how to update without losing my data? I'm getting tired of restoring and reinstalling and logging in to most of my apps every month or two :angel:
michnow said:
Some quick tutorial?
Click to expand...
Click to collapse
Do the same thing as .205 with the .205 kernel coz is just a security update not a system update
Edit : use .235 kernel is already online
ishemes said:
Anybody know how to update without losing my data? I'm getting tired of restoring and reinstalling and logging in to most of my apps every month or two :angel:
Click to expand...
Click to collapse
Just uncheck "wipe data user" when you flash with flashtool
Castiglionais said:
Just uncheck "wipe data user" when you flash with flashtool
Click to expand...
Click to collapse
Thanks. I'll try that. I was still using newflasher.
ishemes said:
Thanks. I'll try that. I was still using newflasher.
Click to expand...
Click to collapse
Wrong info from Castiglionais. Don't check anything because everything is already unchecked. Just flash firmware.
the_brad said:
It works, if you add a line for that firmware version manually in xperifix. I have done so and everything works fine.
Click to expand...
Click to collapse
michnow said:
Some quick tutorial?
Click to expand...
Click to collapse
Device settings were updated a few minutes ago. XperiFIX should now work with the current firmware version.
Nothing here on unlocked UK yet
the_brad said:
Thanks for the information! Just updated with flashtool and it looks like, the bootloader got an update with this version. The Warning image at the start changed a bit...
Click to expand...
Click to collapse
Changed completely
---------- Post added at 14:59 ---------- Previous post was at 14:48 ----------
sToRm// said:
Device settings were updated a few minutes ago. XperiFIX should now work with the current firmware version.
Click to expand...
Click to collapse
XperiFIX.. as since its beginning, quick and reliable!
sToRm// said:
Device settings were updated a few minutes ago. XperiFIX should now work with the current firmware version.
Click to expand...
Click to collapse
My camera isn't working after update to .235.
baz1 said:
My camera isn't working after update to .235.
Click to expand...
Click to collapse
No camera at all or just green pictures?
Aerocap said:
No camera at all or just green pictures?
Click to expand...
Click to collapse
Camera doesn't make shots at all. Selfie camera works though.
[edit]
Sorry, posted into wrong thread, my problems with XZ1 Compact
[edit2]
Flashing new bootloader (boot_delivery) solved camera.
Is fingerprint scanner enabled in USA version of this update?
VBBoston said:
Is fingerprint scanner enabled in USA version of this update?
Click to expand...
Click to collapse
No.