Ok so to start off I tried to root using the SamPwnd thread for the snapdragon version of my phone. So everything was going well until I was getting a fail and i tried to reboot my device cause i was gonna stop trying well my phone would get stuck at my carrier loading screen so i tried to boot into recovery mode but apperently odin had already erased it so Im stuck as to what to do.
I download many different firmwares and i keep getting complete(write) failed
Related
so i follow the steps and flash using qpst and got the aws unlocked on my phone. ive used the phone all day with no problems and great internet speed, now that night my phone died and when i restarted my phone i noticed it would get stuck on the s4 welcome screen and pause. ive tried pulling the battery and getting into recovery but it just reads recovery booting so i got the phone into download mode, downloaded the stock firmware and flashed using odin. it says successful but when i restart phone wala im back to the same problem. now the phone was never rooted and ive tried flashing stock kernels, stock firmware nothing. ive been up two days reading post after post and no matter what i read and tried i cannot prevail. i could use odin off the compo if that helps so maybe all i need are all stock files? the firmwares ive tried havent changed so if anybody could help would be greatly appreciated
cliffs.
enable aws bands
phone works fine till battery died
cant get to recovery booting but can get into odin mode
already tried flashing stock firmware and kernel
o M O N O o said:
so i follow the steps and flash using qpst and got the aws unlocked on my phone. ive used the phone all day with no problems and great internet speed, now that night my phone died and when i restarted my phone i noticed it would get stuck on the s4 welcome screen and pause. ive tried pulling the battery and getting into recovery but it just reads recovery booting so i got the phone into download mode, downloaded the stock firmware and flashed using odin. it says successful but when i restart phone wala im back to the same problem. now the phone was never rooted and ive tried flashing stock kernels, stock firmware nothing. ive been up two days reading post after post and no matter what i read and tried i cannot prevail. i could use odin off the compo if that helps so maybe all i need are all stock files? the firmwares ive tried havent changed so if anybody could help would be greatly appreciated
cliffs.
enable aws bands
phone works fine till battery died
cant get to recovery booting but can get into odin mode
already tried flashing stock firmware and kernel
Click to expand...
Click to collapse
You could try taking out your SIM and SD card and start your phone that way to see if it boots.
Leave your battery out for 30s and try again without your SIM and SD in there.
You could also download Samsung Kies and try to connect your phone to see if there is a chance the software will see your phone is connected. And from the Tools option try the emergency options.
sorry to be more specific the phone will turn on and stay at the white galaxy s4 screen, i could boot up in odin mode and flashed the original firmware but that doesnt do it. i could vol+ and power button but cant access recovery the blue letters stay lit top left. i could access dl mode with vol- though. ive read thru numerous threads but they all seem to be rooted i am not, all i did wasflash the t-mobile aws bands with qpst.
No one tried to flash only recovery for Odin.
Questions and help issues go in Q&A and Help section
Thread moved
Thanks
FNM
MegaGalan said:
No one tried to flash only recovery for Odin.
Click to expand...
Click to collapse
after following the guide to enable the aws bands my phone was working till the battery died now after that the phone stays stuck at the first startup screen and there is no recovery with VOL+ and power button. basically trying to ask what could be done, i tried stock firmware with odin and have tried with kies with the end result being stuck on first galaxy screen with no option to factory reset
Hey Guys I'm new to this forum and apologies if this has been covered and would be grateful if someone to point me to the right direction. Link-drive.google.com/file/d/0BwqxONwTQDjiSkF3VWN0UmpFSHc/view?usp=sharing
So just briefly the problem at hand : I did an update to 6.0.1 and after this update my fone screen motion sensor stop working, didnt switch when i turn the fone side ways and also the games with motion requirement didnt work. So just recently there was an heartstone(Blizzard game update) I did the update the fone was working fine till i manually did a restart, thats when my s5 g906s went into bootloop. with a little distortion on the bottom right hand corner. Link-drive.google.com/file/d/0BwqxONwTQDjiSkF3VWN0UmpFSHc/view?usp=sharing
1.)I've already tried to restore it with kies3 manually added the S/N and IMEI it completes but same bootloop with a little distortion on the bottom right hand corner.
2.)I tried to go into recovery mode by pressing Power+Home+Volume Up but it wont enter that mode.
3.)I tried to Use Odin with the fone variant with full AP,BL,CP,CSC and pit ODIN loads all files and give me a PASS message but after this when the fone restarts it tries to go into recovering mode(top lefthand in blue) but it just turns off with a vibrate. Link - drive.google.com/file/d/0BwqxONwTQDjiVHV2RGxrSVRRNU0/view?usp=sharing
4.) So i though the recovery is faulty so i tried to flash a recovery unofficial_philz_touch_6.48.4-g906s_hsk.tar but i get this error
<ID:0/005> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
After this i read some threads saying I need root so i tried to flash from autoroot_chainfire_eu but same <ID:0/005> FAIL! (Auth) error.
Now im just stuck, what am i doing wrong? Please if someone can help me out a little would mean a great deal, thanks.
Try ask help here.. http://forum.xda-developers.com/showthread.php?t=2259645
Send from SM G900F xXx 5.1 Odex Boeffla 2.1 beta3 Twrp 3.0.2-0
If you haven't already found a reply, try loading one of @kykint's recoveries from this post: http://forum.xda-developers.com/galaxy-s5/development/recovery-twrp-recovery-v2-8-7-0-t3199011
I'm currently using his 3.0.2-2 TWRP build on my G906S.
im new to this but here it goes i flashed g935aucu4bqa6_Recovery using odin 3.12 and it got my phone out of a bootloop but when it boots up it says installing system update then goes through erasing then it states no command so i press power and volume up to go into recovery then i press wipe catch then it reset it boots samsung and AT&T logo then says Device storage corrupt so i reboot back into recovery and i go to factory reset and it stops and says e:format_volume; make ext4 failed on /dev/block/bootdevice
is there anything i can do i even took it to bestbuy and the guy said it wont put the stock on there maybe cause its rooted i also tried to load stock back onto it and it failed with new cord and different usb ports
ANY HELP would be appreciated
Lazyleperchaun said:
im new to this but here it goes i flashed g935aucu4bqa6_Recovery using odin 3.12 and it got my phone out of a bootloop but when it boots up it says installing system update then goes through erasing then it states no command so i press power and volume up to go into recovery then i press wipe catch then it reset it boots samsung and AT&T logo then says Device storage corrupt so i reboot back into recovery and i go to factory reset and it stops and says e:format_volume; make ext4 failed on /dev/block/bootdevice
is there anything i can do i even took it to bestbuy and the guy said it wont put the stock on there maybe cause its rooted i also tried to load stock back onto it and it failed with new cord and different usb ports
ANY HELP would be appreciated
Click to expand...
Click to collapse
How long did you wait after you had information "Erasing"? My phone took good 2-3 min to start after. Pay attention to blue light if it is blinking after. I think you need to ODIN firmware with pit file.
On Edge of Galaxy
wait time
norbarb said:
How long did you wait after you had information "Erasing"? My phone took good 2-3 min to start after. Pay attention to blue light if it is blinking after. I think you need to ODIN firmware with pit file.
On Edge of Galaxy
Click to expand...
Click to collapse
it went in and out of updating then erasing there was no blue led indicator then it booted to data file corrupt I used the pit file as well and I'm sure that's what helped it out of a bootloop
Lazyleperchaun said:
it went in and out of updating then erasing there was no blue led indicator then it booted to data file corrupt I used the pit file as well and I'm sure that's what helped it out of a bootloop
Click to expand...
Click to collapse
Seems like your hardware is damage. You may try another firmware like t-mobile or combination files, even i would try download different build of AT&T firmware. If this not going to help it is phone it self.
sm-g935U
norbarb said:
Seems like your hardware is damage. You may try another firmware like t-mobile or combination files, even i would try download different build of AT&T firmware. If this not going to help it is phone it self.
Click to expand...
Click to collapse
i tried G935U and t failed with this
<ID:0/007> userdata.img.ext4
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1
Lazyleperchaun said:
i tried G935U and t failed with this
<ID:0/007> userdata.img.ext4
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1
Click to expand...
Click to collapse
Looks like you phones flash memory is damage. But like i said try different firmware.
SM-G950FD
Recently just got the s8 and tried to flash and root to get the batman rom. My attempt was a huge failure. I failed the instructions and even had a friend you had already done this process check if I did anything wrong. Once in Odin and flashed with Twrp my s8 did not boot up to the os homepage nor was it in recovery mode. It was a black screen saying something along the lines of "verification reject" and the only option I got was to reset the phone. Reset the phone and tried to flash it again, same thing happened.
At this point I just wanted to use my s8 stock everything so I tried to go back into recovery mode but now I'm stuck in a boot up loop and I can only go into download mode. I tried flashing it with all stock everything except now one in Odin the process fails. Odin is still able to pick up my phone but once you hit start it will say "fail"
I can't turn off the device I just pretty much left it to die so it's kind of "turned off" but I've tried virtually everything I could think of. Not sure if there is anything else I could do or if this s8 is just literally a brick now. Any help would be gladly appreciated!
I_Love_My_Brick said:
SM-G950FD
Recently just got the s8 and tried to flash and root to get the batman rom. My attempt was a huge failure. I failed the instructions and even had a friend you had already done this process check if I did anything wrong. Once in Odin and flashed with Twrp my s8 did not boot up to the os homepage nor was it in recovery mode. It was a black screen saying something along the lines of "verification reject" and the only option I got was to reset the phone. Reset the phone and tried to flash it again, same thing happened.
At this point I just wanted to use my s8 stock everything so I tried to go back into recovery mode but now I'm stuck in a boot up loop and I can only go into download mode. I tried flashing it with all stock everything except now one in Odin the process fails. Odin is still able to pick up my phone but once you hit start it will say "fail"
I can't turn off the device I just pretty much left it to die so it's kind of "turned off" but I've tried virtually everything I could think of. Not sure if there is anything else I could do or if this s8 is just literally a brick now. Any help would be gladly appreciated!
Click to expand...
Click to collapse
Did you follow the steps exactly as it says here?
https://forum.xda-developers.com/ga...pment/recovery-twrp-galaxy-s8-exynos-t3595102
eg: when you press start in Odin to flash TWRP hold recovery button combo?
I would suggest starting again, go to download mode and start and read the instructions a few times step by step.
Or flash stock firmware and then start again. If you get an error in Odin post it here for help.
Hello
I have the same Problem
No boot, nothing
It only shows the Bootlogo
I cant flash Recovery anymore, only get failed
I can only go to Download Mode
What is this a new block by Samsung
I really hate Samsung!
Hope there is any help
Sent from my SM-G920F using XDA-Developers Legacy app
callumbr1 said:
Did you follow the steps exactly as it says here?
https://forum.xda-developers.com/ga...pment/recovery-twrp-galaxy-s8-exynos-t3595102
eg: when you press start in Odin to flash TWRP hold recovery button combo?
I would suggest starting again, go to download mode and start and read the instructions a few times step by step.
Or flash stock firmware and then start again. If you get an error in Odin post it here for help.
Click to expand...
Click to collapse
I have tried that as well. I tried again this morning and still the same issue. I load up all the files that are need for the stock flash and once in odin and I hit start the process starts but then says fail.
https://forum.xda-developers.com/galaxy-s8/help/stuck-bootloop-flashing-aqg5-fix-t3636857
Try this
Saved my Love
Works like a Charm
OMG....
Sent from my SM-G920F using XDA-Developers Legacy app
Denis Meissner1990 said:
https://forum.xda-developers.com/galaxy-s8/help/stuck-bootloop-flashing-aqg5-fix-t3636857
Try this
Saved my Love
Works like a Charm
OMG....
Sent from my SM-G920F using XDA-Developers Legacy app
Click to expand...
Click to collapse
I'm gonna give this a try!!!
What was the link that you used to get the firmware? I know sammobile the free download servers are down for maintenance
I downloaded the BL from BatMan Rom so there is no need to load the full Firmware
Sent from my SM-G920F using XDA-Developers Legacy app
Denis Meissner1990 said:
I downloaded the BL from BatMan Rom so there is no need to load the full Firmware
Sent from my SM-G920F using XDA-Developers Legacy app
Click to expand...
Click to collapse
I'm able to get into TWRP with the method you just showed me so thank you!!
I keep running into problems every time I move a step forward. Now when I move the batman rom file to the storage it says "failed" or file "corrupted" am I still doing something wrong?
even with TWRP, Magisk and no-verity installed my phone still can not boot up into the phone's OS I'm still stuck with a boot loop.
I've tried to wipe everything already and start over and still I'm in the loop
I_Love_My_Brick said:
I'm able to get into TWRP with the method you just showed me so thank you!!
I keep running into problems every time I move a step forward. Now when I move the batman rom file to the storage it says "failed" or file "corrupted" am I still doing something wrong?
even with TWRP, Magisk and no-verity installed my phone still can not boot up into the phone's OS I'm still stuck with a boot loop.
I've tried to wipe everything already and start over and still I'm in the loop
Click to expand...
Click to collapse
Sry for late answer :/
Have you tried to dl BatManRom again?
Maybe your dl wasn't successful
Try again, should work
I also installed BatManRom ?
Best Rom out there
Install BL and CP from BatManRom via Odin, then boot in TWRP
Advanced wipe all except external and then flash Rom
Choose your Settings, no need to install BL and CP again
after install, Reboot, wait for around 10 mins, then Setup System and all should work fine ?
Cheers
Sent from my SM-G950F using XDA-Developers Legacy app
I_Love_My_Brick said:
SM-G950FD
Recently just got the s8 and tried to flash and root to get the batman rom. My attempt was a huge failure. I failed the instructions and even had a friend you had already done this process check if I did anything wrong. Once in Odin and flashed with Twrp my s8 did not boot up to the os homepage nor was it in recovery mode. It was a black screen saying something along the lines of "verification reject" and the only option I got was to reset the phone. Reset the phone and tried to flash it again, same thing happened.
At this point I just wanted to use my s8 stock everything so I tried to go back into recovery mode but now I'm stuck in a boot up loop and I can only go into download mode. I tried flashing it with all stock everything except now one in Odin the process fails. Odin is still able to pick up my phone but once you hit start it will say "fail"
I can't turn off the device I just pretty much left it to die so it's kind of "turned off" but I've tried virtually everything I could think of. Not sure if there is anything else I could do or if this s8 is just literally a brick now. Any help would be gladly appreciated!
Click to expand...
Click to collapse
Hey same happened to me if you still need help ask me. I can send you my number through email and you can call me.
Hello to day i got an Hardbrick S8+ (HK region its G9550ZHU....) , its only detect by QHUSB 9008 and nothing more (no charge, no downloadmode , nothing .... just 9008 ) . The victim say he is trying to flash Combine file from octoplus box but the file have G9550ZCU , he want to bypass FRP lock. So any one have a idea ?
pardon
kertikhuseyin said:
pardon
Click to expand...
Click to collapse
You need the edl firehose and XML files and the software for recovering from a brick like that.
And frp bypass is not an allowed subject here because people who ask tend to have a device that is likely stolen
Hi guys,
I have big problem with my new G950F. I try to install custom recovery (twrp) via ODIN. I do it like I suposs to do. All was be fine. ODIN pass but now my phone won't turn on. They don't respond to anything , recovery buttons and download butont nothing. They take 0,16 A and computer dont recognize it.
After flashing custom recovery phone was be powered down when samsung logo appears. after that phone doesn't respond to anything.
I was try:
Download combo - 2 min
Recovery combo - 2 min
Restart combo - 5 min
JIG 301K (work on A510F) - also nothing happens.
what I can do?
Someone please help. Thanks
Hello,
I am totally desperate...
I've try to update the firmware of my old Samsung GT-S7390G. I did not use it for a years, and he did not want to boot, so I upgraded the firmware using Odin. I believe I picked up the wrong firmware (one provided for Orange operator), but the upgraded worked well at first: the phone was working well. Next, I updated several android/google apps.... and problems started. Now the phone keeps rebooting... It starting normally, but once it started to work (I can see the menu, etc. but the sim card is no more detected), after several seconds the screen dim out and the phone reboot. I cannot access any settings, since it keeps rebooting very fast.
Using Odin, I could "PASS" another firmware upgrade... but it has no effect. The phone boots with Orange logo, and crashes/reboot after several second, it's like the firmware upgrade had no effect at all. I've tried different firmwares... some can pass, other not, but nothing works, nothing change. I wanted to use re-partition options, but it never works, Odin is asking for a pit file... I cannot find any pit file for this model on the net.
I can enter recovery mode, I can enter download mode. But I cannot get rid of this update.
Hard reset seems to work... but change NOTHING!
What can I do? Help!
Thank you...