I always fail in twrp to install a rom it always says something like decrompression error in log but i can install eui via fastboot. but any other rom fails on install .
Decompression failed with BLOCK_LENGTH_1 is one of the erros in log ???
Taichu82 said:
I always fail in twrp to install a rom it always says something like decrompression error in log but i can install eui via fastboot. but any other rom fails on install .
Decompression failed with BLOCK_LENGTH_1 is one of the erros in log ???
Click to expand...
Click to collapse
What phone? Latest twrp?
Follow the crDroid guide:
2a) Flash firmware 20s if you dont have it
Related
I get a failure when trying to flash a new ROM. I have three different zips (ROMs) on my phone. None of them will install for some reason and I get a failed error and it puts something about an error when updating binary script? How could I fix this on my nexus 4?
If I need to update twrp could I do so without using goomanager to do this? Goomanager won't download the recovery so I have to use another method
You probably need to update to the latest TWRP version. Use the TWRP link in my signature and get the latest version in the "mako" folder.
Use fastboot to flash it, use the command:
fastboot flash recovery twrp.img
(replacing twrp.img with actual file name)
If you don't know how to use fastboot, use the 3rd link for guide on installing custom recoveries.
dreammaster252 said:
I get a failure when trying to flash a new ROM. I have three different zips (ROMs) on my phone. None of them will install for some reason and I get a failed error and it puts something about an error when updating binary script? How could I fix this on my nexus 4?
If I need to update twrp could I do so without using goomanager to do this? Goomanager won't download the recovery so I have to use another method
Click to expand...
Click to collapse
had the same error and resolved it like this:
installed ROM Installer vom play store
installed cwm, and then twrp again from rom installer.. worked perfectly!
BUT WHATCH OUT! i think the error you get is called "error 9".. or something like that, it appears, when you try to install a zip, and the updater-skripts cancels the installation process, e.g., because it is not hte right zip for your phone!
so look at first, if you have the right zip downloaded
Need help Urgent!!!!!!!!
I had rooted my phone successfully 1 year ago but while installing xposed privacy it asked unlock bootloader and changed to twrp recovery 2.8.7.0 but some problem occured i can not go after asus logo so i visited customer care and he installed kitkat 2.22.40.54 version with out locking that bootloader. After succesful usage of 1 year my settings option not opened it always show "unfortunately. com.android settings has stopped" so i tried to flash a new rom i wiped cache and data unfortunately system also.
so that im not able to flash new rom errors occurs are
1. E:unknown file system: 'osip'
E:unknown file system: 'osip'
E:unknown file system: 'osip'
E: Invalid block device on '/dev/block/zram0one......................................
2. E: Unable to locate page (system_readonly)
3. no MD5 file found even i downloaded the firmware from asus support (2.22.40.540 as well as 2.21.40.44)
4. assert failed: getprop("ro.build.asus.sku")=="ww" return code 8
5. E: Error executing updater binary in zip '/external_sd/.....................zip
(** note: i had not enabled usb debugging
when i try to flash rom using adb sideload it is not showing in the list even it is connecting as media transfer
through otg also not going i dont know it is not showing in the recovery)
thats the problem guys please help me out of this
ajay019 said:
Need help Urgent!!!!!!!!
I had rooted my phone successfully 1 year ago but while installing xposed privacy it asked unlock bootloader and changed to twrp recovery 2.8.7.0 but some problem occured i can not go after asus logo so i visited customer care and he installed kitkat 2.22.40.54 version with out locking that bootloader. After succesful usage of 1 year my settings option not opened it always show "unfortunately. com.android settings has stopped" so i tried to flash a new rom i wiped cache and data unfortunately system also.
so that im not able to flash new rom errors occurs are
1. E:unknown file system: 'osip'
E:unknown file system: 'osip'
E:unknown file system: 'osip'
E: Invalid block device on '/dev/block/zram0one......................................
2. E: Unable to locate page (system_readonly)
3. no MD5 file found even i downloaded the firmware from asus support (2.22.40.540 as well as 2.21.40.44)
4. assert failed: getprop("ro.build.asus.sku")=="ww" return code 8
5. E: Error executing updater binary in zip '/external_sd/.....................zip
(** note: i had not enabled usb debugging
when i try to flash rom using adb sideload it is not showing in the list even it is connecting as media transfer
through otg also not going i dont know it is not showing in the recovery)
thats the problem guys please help me out of this
Click to expand...
Click to collapse
Ok so as per my understanding , you have unlocked bootloader .
You also have custom recovery twrp 2.8.7 installed . Right ?
Since you wipe system , your phone is without any os right now .
So now what you do is download any stock modified rom for your device .
Download latest twrp by xanwar . Flash the twrp zip (by xanwar)from twrp 2.8.7 (already installed ).
Voila ! Now you can flash any custom rom or stock based modified roms .
I don't know this is what you asking
Boomshiva said:
Ok so as per my understanding , you have unlocked bootloader .
You also have custom recovery twrp 2.8.7 installed . Right ?
Since you wipe system , your phone is without any os right now .
So now what you do is download any stock modified rom for your device .
Download latest twrp by xanwar . Flash the twrp zip (by xanwar)from twrp 2.8.7 (already installed ).
Voila ! Now you can flash any custom rom or stock based modified roms .
I don't know this is what you asking
Click to expand...
Click to collapse
yes i unlocked bootloader and i have custom recovery twrp 2.8.7.0 installed but here the problem is i didnt enabled usb debugging mode so that i'm not able to flash and the errors are as above mentioned. modified rom you are saying means i'm using 2.22.40.54 kitkat so may i able to install lollipop or higher version.one more thing i dont know what these errors mean..
ajay019 said:
yes i unlocked bootloader and i have custom recovery twrp 2.8.7.0 installed but here the problem is i didnt enabled usb debugging mode so that i'm not able to flash and the errors are as above mentioned. modified rom you are saying means i'm using 2.22.40.54 kitkat so may i able to install lollipop or higher version.one more thing i dont know what these errors mean..
Click to expand...
Click to collapse
Ok . I understand now .
1)donwlaod latest twrp by xanwar . And flash it. So now you have latest recovery installed on your device .:fingers-crossed:
2)download gecko premium rom from Android development section here on xda . Place it on SD card .
3)reboot to recovery , wipe everything except SD card . (You will lose everything from your phone .)
4)if step 3 gives error then format data not wipe .
5)repeat step 3
6)reboot to recovery now .
Flash the rom that you downaoded (gecko premium )
7)reboot system .
8) do this first then report back .
Boomshiva said:
Ok . I understand now .
1)donwlaod latest twrp by xanwar . And flash it. So now you have latest recovery installed on your device .:fingers-crossed:
2)download gecko premium rom from Android development section here on xda . Place it on SD card .
3)reboot to recovery , wipe everything except SD card . (You will lose everything from your phone .)
4)if step 3 gives error then format data not wipe .
5)repeat step 3
6)reboot to recovery now .
Flash the rom that you downaoded (gecko premium )
7)reboot system .
8) do this first then report back .
Click to expand...
Click to collapse
one more mistake bro i didnt find xanwar twrp 3.0.2.0 so i browsed for another one which is 3.0-m-4.0 and flashed it successfully but reboot in recovery is not going then powered off the phone and started to go into recovery mode but in recovery mode touch is not working so only hanged i repeatedly switched off and on but same result. so what to do now.....? i think im having no other choices than using droidboot but adb side load is not working bz i didnt enabled usb debugging mode. in pc it is showing connected to pc until i started adb when i started it disappearing.
ajay019 said:
one more mistake bro i didnt find xanwar twrp 3.0.2.0 so i browsed for another one which is 3.0-m-4.0 and flashed it successfully but reboot in recovery is not going then powered off the phone and started to go into recovery mode but in recovery mode touch is not working so only hanged i repeatedly switched off and on but same result. so what to do now.....? i think im having no other choices than using droidboot but adb side load is not working bz i didnt enabled usb debugging mode. in pc it is showing connected to pc until i started adb when i started it disappearing.
Click to expand...
Click to collapse
I don't understand the logic behind not enabling usb debugging !
No need for all that .
If using windows then make sure the all driver shows up when you enter into fastboot mode .
Check from control panel of your PC . If not then reinstall the drivers . It must show asus composite ...........Blah Blah blah ...Android bridge interface .(well i use Linux so dont recall properly ).
Once the desired drivers are present you are good to go ahead .And flash proper twrp .And do the rest .
Bottom line :check drivers
Flash the latest twrp (24 July build) link below
https://www.androidfilehost.com/?w=files&flid=52033
Boomshiva said:
I don't understand the logic behind not enabling usb debugging !
No need for all that .
If using windows then make sure the all driver shows up when you enter into fastboot mode .
Check from control panel of your PC . If not then reinstall the drivers . It must show asus composite ...........Blah Blah blah ...Android bridge interface .(well i use Linux so dont recall properly ).
Once the desired drivers are present you are good to go ahead .And flash proper twrp .And do the rest .
Bottom line :check drivers
Flash the latest twrp (24 July build) link below
https://www.androidfilehost.com/?w=files&flid=52033
Click to expand...
Click to collapse
thank you bro successfully flashed new rom GECKO-premium-ROM-3.24.40.87-v1.0. problem solved. may i know how to install and activate xposed installer for this version and one more thing may i change the recovery any time with out disturbing os?
ajay019 said:
thank you bro successfully flashed new rom GECKO-premium-ROM-3.24.40.87-v1.0. problem solved. may i know how to install and activate xposed installer for this version and one more thing may i change the recovery any time with out disturbing os?
Click to expand...
Click to collapse
Flash xposed zip . Sdk21 v86 works flawlessly ,
Then download the apk for xposed and install it as normal apk you can change recovery anytime but be sure that you flash your devices twrp only not others .
hi,
i have on rooted yu 4711, with twrp installed, i was trying to install magisk but in process i deleted all data/system/media from phone, so now i have os less phone with twrp installed, how can i revert to rom, also i tried some rom and those are giving error 7, also removing assert code doesnt helped.
Update twrp to 3.1.1
SOLUTION
1. Download QCOM TOOL AND DRIVER
2. FIRMWARE - SEARCH IT ON GOOGLE OR YOUTUBE YOU WILL GET
3. FOR DEVICE NOT DETECTING
4. YOU CAN USE PDA NET DRIVERS
5. PUT YOUR PHONE TO DOWNLOAD MODE CONNECT IT TO A PC
6. SELECT SOME SETTINGS - CONTACT ME [email protected]
7. DONE
THIS WILL BE HELPFUL WHEN YOUR DEVICE IS ONLY SHOWING YUNIQUE OR YU SCREEEN ON START/BOOT
neteater said:
hi,
i have on rooted yu 4711, with twrp installed, i was trying to install magisk but in process i deleted all data/system/media from phone, so now i have os less phone with twrp installed, how can i revert to rom, also i tried some rom and those are giving error 7, also removing assert code doesnt helped.
Click to expand...
Click to collapse
I posted a backup of default ROM.
https://drive.google.com/file/d/0B5Wv7DwqR8Y_QnhQNDhuZlhFZlU/view?usp=drivesdk
Download it
Extract using PC
Now copy extracted folder in TWRP folder of your phone
Now restore using TWRP
Done Enjoy
For error 7
Just flash latest NON-HLOS.bin through fastboot
Then install any rom.
Hi!
I'm trying to install an update of OxygenOS. I wanted to install this with a .zip folder via my TWRP custom recovery (TWRP 3.2.3-0). However, I'm still having an issue with every ROM that I'm trying to install: "Invalid zip file format!", following by: " Error installing zip file 'OxygenOS.zip' ".
I precise that I have this issue with every .zip ROM that I'm trying to install...
I actually don't have any ROM installed on my OP5, so I can't boot right now.
I'm only fighting with my TWRP recovery and my Bootloader !
The Android version I had before that was Android 7.1.1( old boy...)
I'd be pleased if someone could help me solving this issue...
Have a nice day & Thx !
SkyZFr said:
Hi!
I'm trying to install an update of OxygenOS. I wanted to install this with a .zip folder via my TWRP custom recovery (TWRP 3.2.3-0). However, I'm still having an issue with every ROM that I'm trying to install: "Invalid zip file format!", following by: " Error installing zip file 'OxygenOS.zip' ".
I precise that I have this issue with every .zip ROM that I'm trying to install...
I actually don't have any ROM installed on my OP5, so I can't boot right now.
I'm only fighting with my TWRP recovery and my Bootloader !
The Android version I had before that was Android 7.1.1( old boy...)
I'd be pleased if someone could help me solving this issue...
Have a nice day & Thx !
Click to expand...
Click to collapse
Hello, you need to clean flash 5.1.4, then ota update to 9.0.9 and then flash twrp from PC again with root.
See here https://forum.xda-developers.com/on...xygenos-4-5-2-7-1-1-ota-t3627003/post72799040 including last pages where it's been explained a lot
strongst said:
Hello, you need to clean flash 5.1.4, then ota update to 9.0.9 and then flash twrp from PC again with root.
See here https://forum.xda-developers.com/on...xygenos-4-5-2-7-1-1-ota-t3627003/post72799040 including last pages where it's been explained a lot
Click to expand...
Click to collapse
what do you mean by " clean flash 5.1.4 " ? Android 5.1.4 ? or Oxygen ?
thx
SkyZFr said:
what do you mean by " clean flash 5.1.4 " ? Android 5.1.4 ? or Oxygen ?
thx
Click to expand...
Click to collapse
I mean OxygenOS 5.1.4
strongst said:
I mean OxygenOS 5.1.4
Click to expand...
Click to collapse
I tried so much, but actually I really can't flash nothing...
I'm now having : "Updater process ended with ERROR: 4"
I also had ERRO 7 from TWRP, but I tried everything, like changing a part of the code of one script of the ROM, but nothing is working.
hi mates,
recently when i downgraded from Nos 13 to 12 (or) from custom to stock NOS i had faced OTA installation problem
(note im bootloader and critical unlocked)
OTA update use fail , and local update also getting error.
I fixed the issue by
fastboot flash boot boot.img
fastboot flash vendor_boot vendor_boot.img
fastboot reboot recovery
then select apply update -> adb side load option in recovery
adb sideload <full_Nos_rom_zip_filename> (from pc)
comeback in recovery and perform factory data reset
reboot system
note:
use payload dumper method to get boot and vendor_boot of specific version that you are using. using other version might cause brick.
use the boot and vendor images for same Nos version
1.1.3 full rom , 1.1.3 boot , 1.1.3 vendor_boot
(or)
1.1.7 full rom , 1.1.7 boot , 1.1.7 vendor_boot
when i tried to use 1.1.4 rom files i got error of previous installation failed in recovery but when i tried with 1.1.3 then succeeded. so try with 1.1.3 or 1.1.7 files.
after reboot now OTA has worked, and now im in 1.1.8
note: i had not locked bootloader and critical at any point. OTA will worked even bootloader is unlocked.
links:
NOS repository
payload dumper guide
Nayakantipavankumar said:
hi mates,
recently when i downgraded from Nos 13 to 12 (or) from custom to stock NOS i had faced OTA installation problem
(note im bootloader and critical unlocked)
OTA update use fail , and local update also getting error.
...
links:
NOS repository
payload dumper guide
Click to expand...
Click to collapse
Yes, but it's not new and logical. You redo a clean installation for have a stable base like users don't have OTA issue. So there no true way to force / fix OTA install in your steps because you must (in this case) entirely factory reset.
It's important to add a thing, factory reset only from actual firmware with OTA issue don't working.
Only factory reset with the boot/vendor_boot replacement working.
I have tried this method but get an error when trying to sideload in recovery. Every method I have tried stop the ability to update via OTA or through recovery.
skeamznz said:
I have tried this method but get an error when trying to sideload in recovery. Every method I have tried stop the ability to update via OTA or through recovery.
Click to expand...
Click to collapse
What error ur getting?
Nayakantipavankumar said:
What error ur getting?
Click to expand...
Click to collapse
Stops at 47% and says cannot rollback.
skeamznz said:
Stops at 47% and says cannot rollback.
Click to expand...
Click to collapse
did you find any fix? I'm having the same issue. please help
someone please help can't sideload any ota. stops at 47% shows rollback protection and sideload aborted