I just plugged my phone in my computer and after that, it didn't worked anymore, i can't boot, i can't boot in any mode(Recovery or download). I've tried charge but doesn't work, the computer doesn't show nothing too. Can anyone help me with that?
Ps:I have a custom rom installed on my phone but, i have this rom about 8 months (Grossoshop).
Same problem but with x727 and I think water went in there little bit.
Related
Hi every one,
I have a G900V that runs a cm ROM(I flashed the custom rom), the phone was fine until 3 days ago,
I tried to boot the phone and nothing happen!?? black screen, no sound no thing respond!!
There is only a vibration when I plug the battery, even if I don't press the power button.
I tried to go recovery or flash but no chance. My computer recognize the phone when plugged as Samsung_Android but I have no access to files or anything else.
Odin also doesn't recognize the phone.
I m thinking to try the unbrick way but before I would ask for your advices please.
Thank you
The phone is a refurbished Galaxy S5.
Hello, I have redmi 3s 32GB , I have had developer rom and last friday as a many of you my phone was not able to be used, so I tried to flash global stable rom via fastmode commands, but phone was bricked, so I removed back cover and reset pins,of course reconnnected battery, after this phone was detected in win10 and I have installed global stable rom, pc now detect phone as redmi 3s, I saw my internal sdcard...but screen is still blank, I cannot see recovery boot, fastboot and no logo too. Could you help me? Is screen broken or is this software problem?
Regards
undulus said:
Hello, I have redmi 3s 32GB , I have had developer rom and last friday as a many of you my phone was not able to be used, so I tried to flash global stable rom via fastmode commands, but phone was bricked, so I removed back cover and reset pins,of course reconnnected battery, after this phone was detected in win10 and I have installed global stable rom, pc now detect phone as redmi 3s, I saw my internal sdcard...but screen is still blank, I cannot see recovery boot, fastboot and no logo too. Could you help me? Is screen broken or is this software problem?
Regards
Click to expand...
Click to collapse
Hi, open ur phone again and check the display connector, try fully disconnecting it and reconnecting it and check if all other connectors in range are also properly connected. Then reassemble ur phone.
Next time, do not open your phone unless you really have to. I don't see why you have opened to reset it. You can press power for very long then after maybe 30 seconds or so, your phone will fully turn off. No need to open it for that.
Next time if you have a question, use the Q&A section, not this one. You'll get answers quicker there too.
Bricked or screen is broken
Without disassembling I was not able to detect my phone, after pin reseting phone was identified in windows. No recovery boot was working too... This is reason why I disassembled phone...
But thank you for reply..
undulus said:
Without disassembling I was not able to detect my phone, after pin reseting phone was identified in windows. No recovery boot was working too... This is reason why I disassembled phone...
But thank you for reply..
Click to expand...
Click to collapse
if that worked, i'd be curious to know
Hi everyone
I tried to updade my huawei nova CAN-L11C530B130 to CAN-L11C432B340
I think the copy/paste of the UPDATE.APP ****ed up beacause the transfer time was very short...Anyway the phone accepted the update but turned off after that.
Now I can't boot, no recovery, no download mode, not even a charging led light.
Please tell me there is a way besides RMA
Thank you very much :good:
Well, either there is no charge (try keeping it on charger for a few hours) or it is totally bricked based on what you said. If it is completely unresponsive there is really nothing you can do.
Boot loader doesnt start as well?
Thanks for your help
I tried an all night charching but It did not help, no boot loader either.
What about the version I had : CAN-L11C530, I don't find any results about it on the internet, strange right ?
When I plug the phone to my computer I get "Qualcomm HS-USB QDLoader 9008 (COM3)"
You could try contacting Huawei support, their is a qualcomm flash tool. You need the tool and the rom to use it. I know it worked on the Nexus 5, but have seen nothing like it for us. I would try going to a shop and asking, but I do not know how viable that is for you.
Thank you wangdaning, it's very kind of you
I'm gonna leave the phone to the carrier who will send it to huawei.
I'm just surprised how easy it was to brick, I have a honor 8 and a mate 8 and it never happened.
I wonder if it comes down to it being a defective device. I have run circles of flashing on mine and it does not brick. I am running Lineage and even the build is not for my device. I have manually flashed partitions, wiped and reflashed partitions (in fastboot). I have made it unusable at times, but never bricked. It works fine now. Seems it might just be an unlucky bad unit you got. Hopefully you had all your stuff backed up and hopefully you get a unit that works well next time.
Please help, so i just bought this phone, the LeEco Le s3, and i bricked it while installing TWRP, now every method i have tried i got some kind of error, the SPFT method just gave me endless errors and failed to upload even when tweaking settings and even having the correct folders, feel free to ask anything and i will respond, but ask a lot, because my phone is bricked and i really need it but can't figure out how to fix it at all, for the record, the phone has a Helios X20 and is the x626 version, i can't even use fastboot on it, it doesn't recognise the device. I will edit this with every question asked and post the results, if my problem is fixed this can act as a thread for x626 users trying to fix the same problem, thanks.
Try to uninstall all drivers of your device , use USBDeview to uninstall hidden and follow this
USBDeview
http://www.nirsoft.net/utils/usb_devices_view.html
https://forum.xda-developers.com/android/help/guide-leeco-le-s3-x626-x622-unbrick-t3705542
marksklava said:
Please help, so i just bought this phone, the LeEco Le s3, and i bricked it while installing TWRP, now every method i have tried i got some kind of error, the SPFT method just gave me endless errors and failed to upload even when tweaking settings and even having the correct folders, feel free to ask anything and i will respond, but ask a lot, because my phone is bricked and i really need it but can't figure out how to fix it at all, for the record, the phone has a Helios X20 and is the x626 version, i can't even use fastboot on it, it doesn't recognise the device. I will edit this with every question asked and post the results, if my problem is fixed this can act as a thread for x626 users trying to fix the same problem, thanks, i am sorry for this frantic language, i am just really panicked.
Click to expand...
Click to collapse
you need flash it at MTK SP tools. it will unbrick it .
My LeEcho S3 X626 did the same thing, but not while installing anything. I put it on the charger overnight and now it only shows the red charging light when plugged in, it won't boot and and it won't do anything. Win 10 computer doesn't recognize it, so how can I get into it? There's no android boot screen, nothing. I've tried power and volume up volume down, there is no response at all!
Pls my letvleeco is dead it only shows a red notification light when it's plug in with d cable and my pc does not detect it and it won't boot up or display anything on d screen
Hi Everyone!
I have an XT1641, which previously had a charging pin problem.
At the Last week, it started to reboot only many times until it suddenly shut down and didn't light anymore.
When plugged into a charger, the white light flickered.
Since I thought it was still a charging pin problem, make the change.
The cellphone works seemed to restart, but it continues with the same problem.
Sometimes the bootloader works ( Power + Vol -) and sometimes No.
I already tried everything. Install ROM STOCK, I made it blankflash (none worked "waiting for firehose to get ready" ).
It seems to be a firmware or similar problem, but I can't find the solution.
Previously, you never had a custom ROM installed, or root, or anything; at this cellphone
Thank you!
PD: SORRY FOR MY ENGLISH
How did you try for installing stock rom? Check usb drivers installed in your pc
przvlj said:
How did you try for installing stock rom? Check usb drivers installed in your pc
Click to expand...
Click to collapse
By Fast Boot (when it worked).
Now, after a week of turning it off, the cell phone turned on again without problems.