Related
Hi guys,
I've got a problem. On Tuesday I was updating my apps on Google Play - I've updated some apps and started just to use them. One of them was popular messenger in Poland. Something's went wrong and my smarthphone freezed. I pulled out the battery after few minutes to prepare a 'soft reset', but it stucked on bootloop. I've tried to make a wipe /data, but it couldn't even mount /data, so I decided to change the ROM from networks' one to newest stock one (one file rom). Everything's went good, but it still stucks on bootloop on another boot animation. I've tried also repartitioning it using the stock rom with "totoro_0623.pit" - still the same. Wiping data after flashing didn't give any change.
When the phone was restarting after the last flash, they was written that /data can't be mounted (invalid arguments).
I don't know what should I do right now. Do you have any propositions for me?
Thanks in advance!
you can try with my firmeware
download
http://d-h.st/FhE
unzip the file
put phone into download mode
connect to pc
start odin
put the files in the following places in odin
pda in pda
modem in phone
csc in csc
begin flashing
do not remove the cable untill the phone has fully booted
it will enter stock recovery and flash csc and restart itself so leave cable connected
this firmware is a wipe pack so it should wipe all your partitions
if it fails you can try with the pit file but do not tick the repartition box in odin or you will be in trouble as you need to also include bootloader files for that
marcussmith2626 said:
if it fails you can try with the pit file but do not tick the repartition box in odin or you will be in trouble as you need to also include bootloader files for that
Click to expand...
Click to collapse
Thanks for reply.
Is it recognized as a stock rom? And the second question: what should I do when I have tick on 'repartition'? What changes will be done then? I thought it's just repartitioning and the bootloader is still the same, without any changes.
Ult1me said:
Thanks for reply.
Is it recognized as a stock rom? And the second question: what should I do when I have tick on 'repartition'? What changes will be done then? I thought it's just repartitioning and the bootloader is still the same, without any changes.
Click to expand...
Click to collapse
if you tick repartition it will wipe your boot partition and your phone wont be able to boot which is why you have to put bootloader files in
you dont need to repartition - in all the times iv flashed stock roms iv never had to do it
That link is for stock room firmware XXMI1 on baseband XXMC2 - its european firmware but will work on any gt-s5360 to get it working
You can always change to another baseband if you find you have no network by flashing a stock rom from your region
Sorry but I didn't have enough time to prepare it in this week. As I saw, I probably need also the bootloader files. Can somebody point me which one will be good? And another question: after changing bootloader the counter on downloading mode will be incremented?
Ult1me said:
Thanks for reply.
Is it recognized as a stock rom? And the second question: what should I do when I have tick on 'repartition'? What changes will be done then? I thought it's just repartitioning and the bootloader is still the same, without any changes.
Click to expand...
Click to collapse
This is a firmware and bootloader provided, I had same problem 4 days ago and this helped me alot
Sent from my GT-S5360 using xda premium
Somebody who tried to repair this phone ticked 're-partition' in my case, but this pack has helped me a lot. Thank you guys, you're amazing.
Hello guys,
I need your help again!
I recently changed my i9100g with this other device, GT-I9505 Italian version, no brand.
The history of this device was quite this: stock FW until 4.3 (just my suppose) --> CM11 --> try to flash 4.2.2 stock --> brick @[email protected]
Now I tried to put the original 4.4.2 firmware by flashing with Odin v3.09, because I don't want custom rom for the moment, just make it work.
The problem is that the phone stucks at Samsung logo, and when I tried to go in recovery mode, it stays on the same logo but there's a blue write in the top left corner "Recovery Booting".
Do you have any suggestion?
TY in advance
Drake9090 said:
Hello guys,
I need your help again!
I recently changed my i9100g with this other device, GT-I9505 Italian version, no brand.
The history of this device was quite this: stock FW until 4.3 (just my suppose) --> CM11 --> try to flash 4.2.2 stock --> brick @[email protected]
Now I tried to put the original 4.4.2 firmware by flashing with Odin v3.09, because I don't want custom rom for the moment, just make it work.
The problem is that the phone stucks at Samsung logo, and when I tried to go in recovery mode, it stays on the same logo but there's a blue write in the top left corner "Recovery Booting".
Do you have any suggestion?
TY in advance
Click to expand...
Click to collapse
Flash the stock rom again..and do NOT check autoreboot in odin.
The straight away boot into recovery, factory reset it..and you'll boot
"If someone helps, never forget to hit thanks ? "
DeepankarS said:
Flash the stock rom again..and do NOT check autoreboot in odin.
The straight away boot into recovery, factory reset it..and you'll boot
"If someone helps, never forget to hit thanks ? "
Click to expand...
Click to collapse
Thank you very much for your reply!
It doesn't work, maybe I'm just doing something wrong, what should I have to do after flash?
Drake9090 said:
Thank you very much for your reply!
It doesn't work, maybe I'm just doing something wrong, what should I have to do after flash?
Click to expand...
Click to collapse
-Open odin
-Uncheck autoreboot
-Add your firmware file to the AP/PDA section
-Start the process
When this will end, your ohone wont boot automatically (obviously)
After 2-3 minutes start it, if it turns on properly congo..
If it doesnt..just boot into recovery (volume up+home button+power button) and perform a data wipe.
If this does not helo at all, download the LATEST KITKAT 4.4.2 UNBRANDED again for your phone as it can be a bad download issue too.
"If someone helps, never forget to hit thanks ? "
DeepankarS said:
-Open odin
-Uncheck autoreboot
-Add your firmware file to the AP/PDA section
-Start the process
When this will end, your ohone wont boot automatically (obviously)
After 2-3 minutes start it, if it turns on properly congo..
If it doesnt..just boot into recovery (volume up+home button+power button) and perform a data wipe.
If this does not helo at all, download the LATEST KITKAT 4.4.2 UNBRANDED again for your phone as it can be a bad download issue too.
"If someone helps, never forget to hit thanks ? "
Click to expand...
Click to collapse
I would try another firmware less recent, just to see what happens...
But I have great news: Philz touch works, so now I have a working custom recovery!
the problem is that I can't just flash a custom ROM to repair
I think I need the pit file, but I can't find one on the internet @[email protected]
Drake9090 said:
I would try another firmware less recent, just to see what happens...
But I have great news: Philz touch works, so now I have a working custom recovery!
the problem is that I can't just flash a custom ROM to repair
I think I need the pit file, but I can't find one on the internet @[email protected]
Click to expand...
Click to collapse
Y do you need a pit? Pit files are not to be played with and can possibly brick if not flashed with utmost care.
Try a stock firmware first. Dont try any stock firmware till you have a working phone..
"If someone helps, never forget to hit thanks ? "
DeepankarS said:
Y do you need a pit? Pit files are not to be played with and can possibly brick if not flashed with utmost care.
Try a stock firmware first. Dont try any stock firmware till you have a working phone..
"If someone helps, never forget to hit thanks ? "
Click to expand...
Click to collapse
I'm flashing this firmware: I9505XXUGNG8_I9505ITVGNG1_ITV
I was thinking about pit because the philz says strange errors:
failed to mount /data to setup /data/media, or something like this... and also other problems related to /sdcard
Have you an idea on what to do?
I'm just following this guide: http://forum.xda-developers.com/showthread.php?t=2265477
Drake9090 said:
I'm flashing this firmware: I9505XXUGNG8_I9505ITVGNG1_ITV
I was thinking about pit because the philz says strange errors:
failed to mount /data to setup /data/media, or something like this... and also other problems related to /sdcard
Have you an idea on what to do?
I'm just following this guide: http://forum.xda-developers.com/showthread.php?t=2265477
Click to expand...
Click to collapse
The pit file is right there in @samersh72s thread
In the attachments.
Flash properly after reading the OP very carefully and DO NOT SKIP ANY STEP OR MODIFY any
Still IMHO a data wipe after reflashing can fix your bootloop.
"If someone helps, never forget to hit thanks ? "
DeepankarS said:
The pit file is right there in @samersh72s thread
In the attachments.
Flash properly after reading the OP very carefully and DO NOT SKIP ANY STEP OR MODIFY any
Still IMHO a data wipe after reflashing can fix your bootloop.
"If someone helps, never forget to hit thanks ? "
Click to expand...
Click to collapse
I thought the same way too, but didn't work...
The attachment doesn't work, but some posts later there is one working
I'll try and let you know the results!
Stll locked here...
Used yhe pit file, but nothing changed
in Philz Touch 6 with CWM 6.0.4.7 I have this error:
E: could not mount /data to setup /data/media path!
Have you ever faced it?
Drake9090 said:
Used yhe pit file, but nothing changed
in Philz Touch 6 with CWM 6.0.4.7 I have this error:
E: could not mount /data to setup /data/media path!
Have you ever faced it?
Click to expand...
Click to collapse
Ermm no...
@Lennyz1988 @MAX 404
Help?
Sent from my GT-I9500 using XDA Free mobile app
I was thinking about a possible cause: could it be that I'm using a wrong firmware?
this device is used, so I supposed that it was ITV the correct firmware, but not 100% sure...
I'm just sure that it is no-brand.
Drake9090 said:
I was thinking about a possible cause: could it be that I'm using a wrong firmware?
this device is used, so I supposed that it was ITV the correct firmware, but not 100% sure...
I'm just sure that it is no-brand.
Click to expand...
Click to collapse
Screenshots of "phone info samsung" app please.
"If someone helps, never forget to hit thanks ?"
When you flash the Odin firmware it's succesfull?
DeepankarS said:
Screenshots of "phone info samsung" app please.
"If someone helps, never forget to hit thanks ?"
Click to expand...
Click to collapse
The only info that I'm able to see are the ones in download mode...
If the phone don't boot any firmware, how can I use that app?
Lennyz1988 said:
When you flash the Odin firmware it's succesfull?
Click to expand...
Click to collapse
Yes, or better to say, Odin says PASS, but when I reboot (even with or without Auto-Reboot flag) the phone stucks on Samsung Logo saying Recovery Booting.
DeepankarS said:
The pit file is right there in @samersh72s thread
In the attachments.
Flash properly after reading the OP very carefully and DO NOT SKIP ANY STEP OR MODIFY any
Still IMHO a data wipe after reflashing can fix your bootloop.
"If someone helps, never forget to hit thanks ? "
Click to expand...
Click to collapse
Drake9090 said:
Yes, or better to say, Odin says PASS, but when I reboot (even with or without Auto-Reboot flag) the phone stucks on Samsung Logo saying Recovery Booting.
Click to expand...
Click to collapse
On top of all advice given here...
Can you boot at all? what is the status at the moment , rom recovery?
I would try to flash a recovery first ( twrp , philz) see if it works , do a factory reset ( backup first) and try flashing a stock rom,,see if it helps
MAX 404 said:
On top of all advice given here...
Can you boot at all? what is the status at the moment , rom recovery?
I would try to flash a recovery first ( twrp , philz) see if it works , do a factory reset ( backup first) and try flashing a stock rom,,see if it helps
Click to expand...
Click to collapse
The situation is still the same, so in order:
I cannot boot a complete system, I just stuck on samsung i9505 logo with blue "Recovery Booting" written in top-left on the screen;
At the moment I'm reflashing ossessively the stock rom, and philz touch; I can go in DL mode and not in the stock recovery, but when I flash philz touch I can enter by double clicking vol up when I see the blue, red and yellow writes.
I cannot do a factory reset, that is the real problem I suppose, 'cause when I enter in philz recovery, it says: "error mount /data etc etc..." as you can see in previous posts.
In DL mode this is the situation:
PN: GT-I9505
Current binary: Samsung Official
System Status: Custom
Knox Kernel Lock: 0x0
Knox Warranty Void: 0x1
csb-config-lsb: 0x30
write prot: enabled
eMMC Burst mode enabled
Drake9090 said:
The situation is still the same, so in order:
I cannot boot a complete system, I just stuck on samsung i9505 logo with blue "Recovery Booting" written in top-left on the screen;
At the moment I'm reflashing ossessively the stock rom, and philz touch; I can go in DL mode and not in the stock recovery, but when I flash philz touch I can enter by double clicking vol up when I see the blue, red and yellow writes.
I cannot do a factory reset, that is the real problem I suppose, 'cause when I enter in philz recovery, it says: "error mount /data etc etc..." as you can see in previous posts.
In DL mode this is the situation:
PN: GT-I9505
Current binary: Samsung Official
System Status: Custom
Knox Kernel Lock: 0x0
Knox Warranty Void: 0x1
csb-config-lsb: 0x30
write prot: enabled
eMMC Burst mode enabled
Click to expand...
Click to collapse
Lets go one step at the time.........forget about recovery for now
Flashing with Odin a stock rom ( use same rom you had before or newer) , what happen? did you followed the guide
http://forum.xda-developers.com/show....php?t=2265477 that @DeepankarS suggested ? did you flash the PIT file?
MAX 404 said:
Lets go one step at the time.........forget about recovery for now
Flashing with Odin a stock rom ( use same rom you had before or newer) , what happen? did you followed the guide
http://forum.xda-developers.com/show....php?t=2265477 that @DeepankarS suggested ? did you flash the PIT file?
Click to expand...
Click to collapse
Followed that guide many times, but the result is stuck in Samsung Logo.
Even tried flashing PIT file, but nothing changed.
maybe flash just a stock recovery after the firmware could solve the problem?
please i need help
i downloaded the root (but not from this website)on my note 3 (4g)
when odin finished ant type (pass) in green square my device restarted but didnt work correctly
it has 3 lines on the top left (yellow and red and blue) this:
RECOVERY BOOTING...
RECOVERY IS NOT SEANDROID ENFORCING
Set Warranty Bit: recovery
and restart again and again until now
please i need help but without losting my (important notes- files)
i heard that there is a non erasable ROM can it helps?
Note: when i press Home+Power+VoiceUp the same problem occures (can't inter that mode)
just home+Power+Voice-down works and inter to root mode (whech works with odin)
thanks to all
Go to sammobile.com and download the firmware for your phone and flash it via Odin.
audit13 said:
Go to sammobile.com and download the firmware for your phone and flash it via Odin.
Click to expand...
Click to collapse
Thanks for replay audit13
but i want to ask, dose it erase the phone or not?
It will erase everything but should leave the data partition untouched. If the phone will not fully boot to the rom, you may have to perform a factory wipe in recovery.
audit13 said:
It will erase everything but should leave the data partition untouched. If the phone will not fully boot to the rom, you may have to perform a factory wipe in recovery.
Click to expand...
Click to collapse
the problem with erasing data
is there any way to keep them??
i needs my (notes) and some very important Pictures
please if you know any way help me
i did the big wrong when i didn't get backup
Data partition
can it helps me later to restore my data??
or NO WAY?
Any help please
You can root it with Kingo Root App.
Search on the Internet about this app
Reads as a failed flash to me .
Recovery wiped .
I would flash a recovery via Odin .
TWRP CWM or Philz Recovery .
ya1ss2er3 said:
Data partition
can it helps me later to restore my data??
or NO WAY?
Click to expand...
Click to collapse
Download your device specific TWRP 2.8.xx not TWRP version 3, Flash it with Odin in download mode...
I had similar issue in the past.
Download a device specific custom rom, dirty flash, connect to your computer, back up data and after that if there are force closes etc.,
Do a proper flash.
Hope this helps.
FYI., Kernel seandroid not reinforcing and Recovery seandroid not reinforcing warning appears when you run custom kernel & recovery.
Nothing to panic about. Just ignore it.
Exactly which model # do you have? Did you try flashing stock recovery?
You could try this: you could flash TWRP with Odin, boot into TWRP, mount the data partition, and pull the files from the partition.
Thanks every one
I solved the problem by reinstall cf-auto-root....
The file I downloaded was incomplete (29.7mb) but the new one is (30.6mb) it worked
thank you all.
ya1ss2er3 said:
please i need help
i downloaded the root (but not from this website)on my note 3 (4g)
when odin finished ant type (pass) in green square my device restarted but didnt work correctly
it has 3 lines on the top left (yellow and red and blue) this:
RECOVERY BOOTING...
RECOVERY IS NOT SEANDROID ENFORCING
Set Warranty Bit: recovery
and restart again and again until now
please i need help but without losting my (important notes- files)
i heard that there is a non erasable ROM can it helps?
Note: when i press Home+Power+VoiceUp the same problem occures (can't inter that mode)
just home+Power+Voice-down works and inter to root mode (whech works with odin)
thanks to all
Click to expand...
Click to collapse
I get it. You have issues with recovery i guess.
Where did you buy the phone? And also where did you download the firmware? and reply the name of the firmware you downloaded (ex:N9005XXUENC2_N9005OJVENB2_KSA)
Hope we can find a solution
EDIT: Didn't see that it was fixed... xD lol
Wow...
thank you every one
i am trying to upload the file but the internet here is very slow so this is the file name may help someone
CF-Auto-Root-hlte-hltexx-smn9005.tar.md5
thank you again.
The chainfire root files can be found here: https://autoroot.chainfire.eu
audit13 said:
The chainfire root files can be found here: https://autoroot.chainfire.eu
Click to expand...
Click to collapse
i did
thanks
Hello guys!
my note 4 software is damaged
it shows android is dead (no command)
i tried with odin to fix it but it didnt went well
now i can only access to recover booting or download mode
and it shows errors all over the screen
what can i do ?
anyone can help? :highfive:
Regards
Rida
hahohaa said:
Hello guys!
my note 4 software is damaged
it shows android is dead (no command)
i tried with odin to fix it but it didnt went well
now i can only access to recover booting or download mode
and it shows errors all over the screen
what can i do ?
anyone can help? :highfive:
Regards
Rida
Click to expand...
Click to collapse
Flash twrp recovery by odin for your model
Once boot into twrp flash any rom for your model.
Trex888 said:
Flash twrp recovery by odin for your model
Once boot into twrp flash any rom for your model.
Click to expand...
Click to collapse
i'm trying to flash twrp but its not working
,from where can i get twrp copy for my sm-n910f?
thanks for help
hahohaa said:
i'm trying to flash twrp but its not working
,from where can i get twrp copy for my sm-n910f?
thanks for help
Click to expand...
Click to collapse
Download twrp.tar file n910f
https://dl.twrp.me/trltexx/twrp-3.0.2-0-trltexx.img.tar.html
Flash using odin and uncheck auto reboot in odin options
Once twrp flash complete in odin remove battery and insert again then press volume up+home+power together to boot into twrp.
You can flash any rom for n910f from twrp.
this is very good rom for n910f below.
https://www.androidfilehost.com/?fid=673368273298915478
This rom need marshmallow bootloader if you are on lollipop this rom will not work.
Trex888 said:
Download twrp.tar file n910f
https://dl.twrp.me/trltexx/twrp-3.0.2-0-trltexx.img.tar.html
Flash using odin and uncheck auto reboot in odin options
Once twrp flash complete in odin remove battery and insert again then press volume up+home+power together to boot into twrp.
You can flash any rom for n910f from twrp.
this is very good rom for n910f below.
https://www.androidfilehost.com/?fid=673368273298915478
This rom need marshmallow bootloader if you are on lollipop this rom will not work.
Click to expand...
Click to collapse
i have twrp now.
thanks man!
but still the rom pls !
hahohaa said:
i have twrp now.
thanks man!
but still the rom pls !
Click to expand...
Click to collapse
after i download it
i need to put it on SD then install it ?
is that right?
hahohaa said:
after i download it
i need to put it on SD then install it ?
is that right?
Click to expand...
Click to collapse
Yes download and put in microsd card then go to twrp and wipe (system/data/cache/dalvik cache) after wipe flash rom and wait 15 minutes to boot.this rom will take time only first time to boot so be patient.
Download this rom
Make sure you are on marshmallow otherwise it will not work.
https://www.androidfilehost.com/?fid=673368273298915478
Trex888 said:
Yes download and put in microsd card then go to twrp and wipe (system/data/cache/dalvik cache) after wipe flash rom and wait 15 minutes to boot.this rom will take time only first time to boot so be patient.
Download this rom
Make sure you are on marshmallow otherwise it will not work.
https://www.androidfilehost.com/?fid=673368273298915478
Click to expand...
Click to collapse
i tried to do so but it shows me "zip verification failed" ...
do i need to change kernel or firmware ?
since two days i'm sitting and trying :|
hahohaa said:
i tried to do so but it shows me "zip verification failed" ...
do i need to change kernel or firmware ?
since two days i'm sitting and trying :|
Click to expand...
Click to collapse
Uncheck zip verification on twrp before flashing rom
Trex888 said:
Uncheck zip verification on twrp before flashing rom
Click to expand...
Click to collapse
i did,
but it shows "checking current CSC failed installer will use btu"
is that ok ?
hahohaa said:
i did,
but it shows "checking current CSC failed installer will use btu"
is that ok ?
Click to expand...
Click to collapse
Yes thats fine go for it.
Actually this rom comes with multi csc codes thats why it confirm which csc you want to use.
Choose whatever csc dosent matter.
hahohaa said:
i did,
but it shows "checking current CSC failed installer will use btu"
is that ok ?
Click to expand...
Click to collapse
i'm waiting almost 45 minutes and it still showing installing system please wait!
to wait more a bit or to reboot it?
hahohaa said:
i'm waiting almost 45 minutes and it still showing installing system please wait!
to wait more a bit or to reboot it?
Click to expand...
Click to collapse
its just keep black out
even twrp not working now!
i have bad luck
maybe firmware would help?
hahohaa said:
its just keep black out
even twrp not working now!
i have bad luck
maybe firmware would help?
Click to expand...
Click to collapse
Wipe everything in twrp including internal storage and flash stock firmware.
After flash firmware make wipe data factory reset from recovery.
Try any other rom if twrp still wotking.
Trex888 said:
Wipe everything in twrp including internal storage and flash stock firmware.
After flash firmware make wipe data factory reset from recovery.
Try any other rom if twrp still wotking.
Click to expand...
Click to collapse
i tried another roms but it shows system failed , and after that i need to take off battery 2 or 3 times till it works.
originally i had android 6.0.1 on it and suddenly while useing F.B app the phone gone crazy then shut down.
since that time i tried many different ways
yesterday i tried to put full firmware 4.4 and 5.1 but both didnt work, then i tried latest firmware from sammobile
but nothing helped !
what i can do more >?
hahohaa said:
i tried another roms but it shows system failed , and after that i need to take off battery 2 or 3 times till it works.
originally i had android 6.0.1 on it and suddenly while useing F.B app the phone gone crazy then shut down.
since that time i tried many different ways
yesterday i tried to put full firmware 4.4 and 5.1 but both didnt work, then i tried latest firmware from sammobile
but nothing helped !
what i can do more >?
Click to expand...
Click to collapse
In download mode what is your model number says ?
Is it shows SM-N910F or something else ?
Trex888 said:
In download mode what is your model number says ?
Is it shows SM-N910F or something else ?
Click to expand...
Click to collapse
yes, the product name : sm-n910f
system status official
knox: 0x1 (4)
reactication lock: off
hahohaa said:
yes, the product name : sm-n910f
system status official
knox: 0x1 (4)
reactication lock: off
Click to expand...
Click to collapse
Try this rom
Make full wipe and Flash in twrp.
https://www.androidfilehost.com/?fid=24659325368664568
Once the rom works flash official 6.0.1 marsh.allow firmware in odin.
Trex888 said:
Try this rom
Make full wipe and Flash in twrp.
https://www.androidfilehost.com/?fid=24659325368664568
Once the rom works flash official 6.0.1 marsh.allow firmware in odin.
Click to expand...
Click to collapse
when i did wiping it shows "faild to mount cache (invalid argument)"
is that ok ?
hahohaa said:
when i did wiping it shows "faild to mount cache (invalid argument)"
is that ok ?
Click to expand...
Click to collapse
Oh dear ! Thats not a good sign.your motherboard is acting crazy.try flash twrp again in odin and try to flash rom without wipe cache or dalvik cache (just wipe system) and flash rom.
If same error ( invalid argument) shows again then in twrp advance wipe there is repair tab at bottom in twrp try to repair cache partition and try again.
Hil
I have a similar problem. I have a note 3 with original UK ROM and wanted to flash my operator ROM to get wifi calling. Both are android 5.0
The problem is after trying to flash the first time I had a problem that the new ROM would not fully flash. reading posts I understood I had to flash PIT file which I downloaded and flashed. After flashing PIT the new ROM did not go in so I flashed my original UK.
After reboot I kept getting security warnings that something has changed and I should reboot. After several boots the problem did not go away.
So I tried to flash ROM again, different tries between UK ROM and my operator ROM, but the phone now only loops at booting. Sometimes it gets stuck at first Samsung screen.
Can anyone please help?
Thank you
What original rom.
What rom you updated to ?
Probable you flashed the wrong size PIT .
JJEgan said:
What original rom.
What rom you updated to ?
Probable you flashed the wrong size PIT .
Click to expand...
Click to collapse
Hi,
So the following:
Original ROM: N9005XXUGBOK6_N9005BTUGBOJ1_BTU
My operator (EE): N9005XXUGBPB1_N9005EVRGBPB1_EVR
Now I tried: 4.4.2.N9005XXUGNG1_N9005OXAGNG1_BTU
I tried the following PITS:
SM-N9005 FTM pit
SM-G900F EVR pit
Any suggestions, would be very grateful.
Thanks
SM-G900F EVR pit
Thats not for N9005 .
Have you tried Samsungs KIES ??
So which Pit to rectify?
Yes I also tried Kies 3 but cannot connect. I have tried under recovery mode and download mode. Odin connects fine though. Not sure why.
SEE
https://forum.xda-developers.com/galaxy-note-3/help/flash-fail-pit-file-n9005evrgbpb1-help-t3384109
If you have N9005 32GB only
Try to change usb cords. I used to have the same problem
JJEgan said:
SEE
https://forum.xda-developers.com/galaxy-note-3/help/flash-fail-pit-file-n9005evrgbpb1-help-t3384109
If you have N9005 32GB only
Click to expand...
Click to collapse
So I flashed the pit successfully, but the EVR ROM failed again.
Any suggestions on why?
bobby121418 said:
So I flashed the pit successfully, but the EVR ROM failed again.
Any suggestions on why?
Click to expand...
Click to collapse
I just flashed my original UK ROM successfully, however after a boot where the message appeared "Recovery booting" then the green Android followed by another reset. It is however stuck on the Samsung screen.
bobby121418 said:
I just flashed my original UK ROM successfully, however after a boot where the message appeared "Recovery booting" then the green Android followed by another reset. It is however stuck on the Samsung screen.
Click to expand...
Click to collapse
Anyone has any suggestions?
bobby121418 said:
Anyone has any suggestions?
Click to expand...
Click to collapse
From closed thread .
You changed to the wrong model firmware and that's a guess as you give no indication .
Another guess is that you ticked the wrong boxes in Odin .
JJEgan said:
From closed thread .
You changed to the wrong model firmware and that's a guess as you give no indication .
Another guess is that you ticked the wrong boxes in Odin .
Click to expand...
Click to collapse
Ok sorry, they were in the begining of the thread but here they are. I tried both and still no result:
Original ROM: N9005XXUGBOK6_N9005BTUGBOJ1_BTU
My operator (EE): N9005XXUGBPB1_N9005EVRGBPB1_EVR
Thanks
There was no beginning details in your closed thread .
Another guess is that you ticked the wrong boxes in Odin .
JJEgan said:
There was no beginning details in your closed thread .
Another guess is that you ticked the wrong boxes in Odin .
Click to expand...
Click to collapse
I have chosen the two boxes mentioned in most places about how to use odin:
Auto Reboot and
"F.Reset Time
Any other suggestions?
Search bootloop
https://forum.xda-developers.com/search/forum/2494?query=Bootloop
Take it to a repair centre .
Personally i would try flashing TWRP via Odin recovery and see if i could get to recovery mode.
JJEgan said:
Search bootloop
https://forum.xda-developers.com/search/forum/2494?query=Bootloop
Take it to a repair centre .
Personally i would try flashing TWRP via Odin recovery and see if i could get to recovery mode.
Click to expand...
Click to collapse
Thanks I will search the link.
Just to let you know I can get to recovery mode now.
What can I do in recovery mode?
bobby121418 said:
Thanks I will search the link.
Just to let you know I can get to recovery mode now.
What can I do in recovery mode?
Click to expand...
Click to collapse
Factory reset .
Then flash stock rom .
That fails i would try flashing a custom rom through recovery .
JJEgan said:
Factory reset .
Then flash stock rom .
That fails i would try flashing a custom rom through recovery .
Click to expand...
Click to collapse
I installed TWRP 3.1.1 as per link above and tried to backup my DATA partition but it is 0MB
I'm afraid Factory reset also failed. I get a bunch of error messages such as:
Failed to mount /data
Formatting cache
Unable to mount storage
Any ideas?
The good news is I still have access to recovery and download.