Hi
Can someone help me? I have leeco X720 and display went broken only backlight works. Nothing is shown on screen. I ordered new display (not first time I change LCD+display to mobile). Display arrived and I took old of and tested new one. First time it was working, but then I cleaned edges. After that I was ready to install new display, but after installation only backlight was working. Two "transistors" are missing as you can see from pic (available). Any suggestions?
I can't send link to my photo. Insufficient post amount, but pictures are available if needed.
BR
Zaikka
Related
Guys,
My partner just closed my phone in her car boot. It works fine which is good however, half the screen is cracked and dead not good. Will it be chaeper to find a replacement screen, by another Trinity or move to something new.
Where could I by a new screen?
I appricated your comments.
Rich
think i have answered my own question...
http://cnn.cn/shop/p3600dopod-d810-screen-p-1734.html?osCsid=d538dc0645483ca7551cfc78c4c9fab2
anyone now anywhere in the uk?
do I need special tools to fit this?
Hello just for information,
I broke my trinity screen and I baught a new screen to a HK seller and i replace it.
I had already flash the firmware (faman 3.6 full) before changing the screen.
So everything seems ok when I put the phone power on but As soon as I put the creen off, I am unable to put it on it appears every time in a complete white screen !!!! to have something on the screen I have to reboot the phone.
I just reflash the phone again with faman 3.6 and it's still the thame problem completly white after turn the screen off then on ...
I try also an official orange WM5 (gps active) and the screen work's well i try after to switch again in WM6 and it doest work :white screen again ...
Can every one help me ?
@ Rich: Check the 'How to dissamble the Trinity' thread. Are your sure that the LCD is broken ? Could also be just the digitizer (USD 8 at cnn.cn.shop).
If you succeed to dissamble the display you should be able to attach a new digitizer.
The only problem are the two black levers ... (one for the display cable, one for the digitizer).
Good luck
Christian
I cracked my Trinity screen with a bad golf swing. Then I bought a replacement screen on ebay, found a disasembly guide, took my trinity apart, replaced the screen, put everything back together, and it works fine! cost me 70 EUR to fix it.
do it following the disassembly guide - taking the trinity apart is rather complicated, you will not figure it out by yourself.
Sometimes I wonder what the engineers drink before designing such complex assemblies!
Hello, I purchased a screen replacement from eBay because I dropped my phone and its showing blue dots in the screen, it looks broken, I finally got the replacement, and when I install it, all the colors are distorted, everything is dark, I´d like to know if there´s something I can try or the replacement is broken as well...please help me out, thanks!!
Which ROM are you using?
If it has the option to take a screenshot - do it.
If this shows correct colors, then i would suggest that the replacement is broken/damaged what ever.
Then you could check if the connectors are placed properly. If this does not help - get another replacement.
Rein haun,
David
Hey guys,
yesterday i changed the screen and digitizer of my Mi2S. Now, when i switch the phone - with new screen - on, the screen is just lightning blue (you can see it on the attached picture). Now i saw that on the Flex Cable of the original screen, there's written B04 and on the new screen there's a B01 instead. So, i think i have now a different version of the screen and not having the drivers for that. So, does anybody (maybe developers) know how to flash others drivers and where to get them from?
Thx already ahead for any help.
img5.fotos-hochladen.net/uploads/img2015090421isdtf24h70.jpg
*already edited it into the first post*
Are you sure you connected both flex cables correctly?
From your picture I would think only the backlight is on and the screen itself is not active...
Would be my first guess...
(I have a Xiaomi Mi2s and did the swap myself, I didn't have any problems... + even if there are different screens, the SW should cater for it, otherwise we would have a different SW build for every screentype used...)
Hi, i send it to a professional repair center and they said that there was a small water damage (from wherever!?). As i now found a pretty ok priced Mi2S (where the camera flex cable is damaged) on Ebay, i'll just insert the camera of my old one into the "new" Mi2S and sell the Display i bought for my old one. Problem solved!
But thanks for the reply anyway!
After replacing a broken screen I installed a new one but it just only turns the back light on and the phone turns off automatically. If I install the original one back it works perfect. Ive just ordered another one from another seller with no difference, exactly experiencing the same issue. The seller does not specify anything related to compatibility so just asking if somebody could help with it?
Thanks!
Hello,
I repaired the screen of my Mi mix 3 5g a little while ago. But since the repair I have been complaining about several bugs. Like the screen that starts flashing yellow but only when launching some applications. These applications seem to be youtube, the playstore and the different browsers. To be clearer this flashing means a constant change from yellow to black on the screen. I'd like to attach a video of this but I'm not allowed to post a link yet. I will do it as soon as possible. Do you think it's coming from the smartphone or the screen?
Of course, all the connectors are properly connected.
Hi ! Have you installed an Oled replacement screen or a LCD one ?
I installed an amoled screen
So it's possibly a defective one or damaged cable