Related
I have a Moto G4 (XT1625) Unlocked with 32GB of storage. Bootloader Unlocked and TWRP Bootloader or Recovery, IDK how to word it, but I attempt to update from Android 6.0.1 to Android 7 and the update fails. When the device reboots it reboots into the TWRP Recovery Menu. How do I proceed. Please help.
Haven't used adb, drivers, or anything and cannot seem to remember the process. Any pointers in the right direction are appreciated. Thank you.
Update 1: I am able to boot into TWRP 3.0.2-0 and see files on my MicroSD. However I downloaded a .ZIP file that was suppose to be the Nougat factory image and when I went to flash it, it says "Installing zip file.... could not find 'META-INF/COM/GOOGLE/ANDROID/UPDATE-BINARY' in the zip file. Error installing zip file."
Update 2: Can someone confirm that I would need to first somehow remove TWRP in order to update? How do I remove TWRP and get phone back to FULL STOCK.
Okay, accepting OTA updates requires a stock recovery (as you've discovered), stock kernel and unmodified system. Furthermore, the stock Nougat zip that you've downloaded needs to be extracted on your computer and flashed via fastboot, it's not flashable in TWRP.
If you're wanting to update and update to the latest Nougat build (which for US devices - XT1625 and XT1644 - appears to be NPJ25.93-14.5, June 2017), the easiest way is to download the stock Nougat ROM from here: https://www.androidfilehost.com/?fid=673368273298984458 . Download to your computer and extract the files. This build is for retail US (non-Amazon devices), with a retus software channel as listed in Settings>About Phone.
Then follow the instructions here, but using the above NPJ25.93-14.5 stock ROM instead. https://forum.xda-developers.com/moto-g4-plus/how-to/stock-rom-npjs25-93-14-4-march-1-t3608138
Beware that this process may erase your data in the process, so back up as necessary. If you do not wish to erase your data, then you can use the following fastboot commands instead of the commands in the guide. Back up anyway and you may have to factory reset (thus losing your data) if your device is not stable. Also, either process will remove TWRP, root and any other modifications. Xposed is still not officially released for Nougat. It is up to you if you choose to re-lock your bootloader or not (of course, re-locking the bootloader will prevent you from flashing TWRP/root/any other modifications).
Code:
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot reboot
pause
One word of warning, once you have formally updated to June 2017 (B1:06 bootloader), do not attempt to downgrade and accept OTA updates. You may wish to downgrade, but I don't recommend it - if you forget to not accept OTA updates, you may hard brick your device. If you think you'll forget, do not downgrade.
Hi,
I have a complete stock moto g4 plus XT1642, with firmware build number NPJS25.93-14-4 (march security update), retgb.
I didn't get the June security update, and I the phone insists that my software is up to date..
I am not interested in rooting my phone. How can I force it to update?
(I also have the same problem with another retgb moto g4 non-plus..).
Thanks!
Yeah, retgb updates seem to be taking a little while to deploy... Like your experience, I was waiting for updates on the retgb channel too... Then I updated using the captured updates on XDA, which appeared to have worked okay
You've got 2 routes:
1) You can download the June 2017 OTA update from here to your device: https://drive.google.com/drive/folders/0B-GUyOfb8OgzR1VrQ1NHWDVmWE0
This is the same update that was on XDA, just mirrored to my Google Drive as the original link does not appear to work.
File name:Blur_Version.25.201.4.athene.retail.en.US.zip
Size: 56 MB
md5 checksum: 4ce250195b2eb71c960ec3b6579bc9d0
Ensure your device is fully updated to NPJS25.93-14-4 (bootloader should be version B1:05), you have a stock recovery, unmodified system and baseband (baseband version should end in .62R), as this update requires the March 2017 update. If your bootloader is still locked, this should all be applicable. Then:
Boot to stock recovery (notes on how to access stock recovery are here: https://forum.xda-developers.com/showpost.php?p=72981796&postcount=58 )
Select 'apply update from SD card'
Locate the Blur_Version.25.201.4.athene.retail.en.US.zip on your device
Install update.
You may wish to wipe cache before rebooting.
Now, you should be updated to June 2017. There's also the September 2017 OTA (requiring the June 2017 patch) which you can apply in the same fashion: https://forum.xda-developers.com/moto-g4-plus/how-to/captured-ota-september-security-patch-t3680367
I successfully flashed the June 2017 OTA onto my XT1642, retgb (so same as yours) that had previously been running on NPJS25.93-14-4 and have had no issues - my network provider, 3 UK, works well
2) If you want to, you can jump straight to the September 2017 stock build, which is running on my XT1642, and this is the method I chose to update (as I was rooted too, so needed a near clean start). I think it should be suitable for the Moto G4 too that you have, but you may wish to check the following stock ROM thread to confirm.
a) Download the September 2017 stock ROM (NPJS25.93-14-10): https://forum.xda-developers.com/moto-g4-plus/how-to/stock-rom-npjs25-93-14-4-march-1-t3608138
b)Set up ADB as directed in the above post. Extract the ROM files in the same folder as your ADB terminal (so you should see files like oem.img and bootloader.img mixed with adb.exe and fastboot.exe)
c)If you wish to keep your data and do not need to re-lock your bootloader (i.e. your bootloader is already locked, or unlocked) and are simply updating, you could use the following fastboot commands to keep your data intact. Back up your data just in case your system becomes unstable and needs a factory reset, though I did not notice any corruption of my data. The initial boot was a little slow (presumably to rebuild caches and update links as necessary):
Code:
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot reboot
These commands should update your GPT, bootloader, recovery, system and modem to NPJS25.93-14-10, Sept 2017 patch. Though you could edit one of the flashing scripts - provided in the stock ROM thread - to match the above commands, I preferred to manually copy each command and execute the commands, checking each command flashed. As with anything affecting the firmware of your device, take your time in flashing. Using the September 2017 stock ROM, my XT1642 is still running happily with the September security patch (and seems smoother too )
Bear in mind that with the June and September updates, the bootloader is updated to version B1:06. Thus, it makes downgrading risky. From the sounds of it, you're not interested in rooting/downgrading, so this might not be for you anyway. Just a heads up that downgrading from the June or September 2017 stock ROMs (e.g. by flashing the older stock ROM without flashing GPT/bootloader) and then accepting OTA updates may cause a device to hard brick. We have ways of attempting to rescue a device in this state but I really wouldn't like to try them if at all possible.
Good luck whichever route you choose
My moto g4 plus, model XT1643 was hardbricked, i installed blank flash on it, it has rebooted into bootloader mode of blankflash with no android logo, and has locked oem of my phone. I cannot install a stock rom now as the oem is locked and when unlocking oem from cmd prompt its asking me to enable oem from from developer options, which i cannot do as my mobile is not booting. Please help as to how can i install stock rom into it as my bootloader and oem is locked now. Any help would be appreciated, thanks.
tried to pass the last stock if I am not mistaken version that is or updated passes without being with bootloader unlocked.
Pranav_dp said:
My moto g4 plus, model XT1643 was hardbricked, i installed blank flash on it, it has rebooted into bootloader mode of blankflash with no android logo, and has locked oem of my phone. I cannot install a stock rom now as the oem is locked and when unlocking oem from cmd prompt its asking me to enable oem from from developer options, which i cannot do as my mobile is not booting. Please help as to how can i install stock rom into it as my bootloader and oem is locked now. Any help would be appreciated, thanks.
Click to expand...
Click to collapse
Following a blankflash, you can only boot into the bootloader, which is normal. It seems that using a blankflash sets your bootloader to be locked, regardless of if it was previously unlocked in the first place. Provided you can flash a stock ROM, your bootloader should become unlocked again.
Have you tried flashing the April 2018 fastboot stock ROM from https://forum.xda-developers.com/moto-g4-plus/how-to/stock-rom-npjs25-93-14-4-march-1-t3608138 ? The guide there should be useful in how to reflash stock firmware to your device, and as it's the newest firmware that has been leaked, should rescue your device.
If you want to keep your bootloader unlocked and try to save your data, then try the following flashing commands instead of the ones in the guide. Be aware that you may have to factory reset your device should it boot but be unstable.
Code:
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot reboot
These commands should flash the April 2018 GPT, bootloader, system and modem to your device. Please try to avoid hardbricks in the future by only flashing stock firmware as new or newer than your bootloader, and please do not use old OTA updates.
echo92 said:
Following a blankflash, you can only boot into the bootloader, which is normal. It seems that using a blankflash sets your bootloader to be locked, regardless of if it was previously unlocked in the first place. Provided you can flash a stock ROM, your bootloader should become unlocked again.
Have you tried flashing the April 2018 fastboot stock ROM from https://forum.xda-developers.com/moto-g4-plus/how-to/stock-rom-npjs25-93-14-4-march-1-t3608138 ? The guide there should be useful in how to reflash stock firmware to your device, and as it's the newest firmware that has been leaked, should rescue your device.
If you want to keep your bootloader unlocked and try to save your data, then try the following flashing commands instead of the ones in the guide. Be aware that you may have to factory reset your device should it boot but be unstable.
These commands should flash the April 2018 GPT, bootloader, system and modem to your device. Please try to avoid hardbricks in the future by only flashing stock firmware as new or newer than your bootloader, and please do not use old OTA updates.
Click to expand...
Click to collapse
Thank you so much, I've restored the stock rom following your guidelines, my phone is working fine but im not able to install any OTA updates after that. Should i just skip any OTA updates from now on, please advice. Thank you.
Pranav_dp said:
Thank you so much, I've restored the stock rom following your guidelines, my phone is working fine but im not able to install any OTA updates after that. Should i just skip any OTA updates from now on, please advice. Thank you.
Click to expand...
Click to collapse
If you flashed the April 2018 security patch stock firmware, there are currently no OTA updates, the April 2018 security patch is the latest available.
If you fully flashed the latest firmware as I mentioned, you should be okay to use OTA updates. Just in future please remember to not use OTA updates if you downgraded your device by flashing old stock firmware.
i have here one xt1640 dead for ota OPJ28.111-22 upgrade.. is possible put in Fastboot for Blank Flash Repair?
Daroas said:
i have here one xt1640 dead for ota OPJ28.111-22 upgrade.. is possible put in Fastboot for Blank Flash Repair?
Click to expand...
Click to collapse
Without a blankflash new enough to flash to the device, I don't think so. You'd have to consider a JTAG repair, a motherboard replacement or buy a new device.
Hi! I currently have NPNS25.137-92 running thanks to a TWRP backup I did before going custom Pie on my G5+. I'd like to go back to stock so that TWRP is removed, bootloader locked and I can take official OTAs up to Oreo or whatever it is. What is the best way to achieve this? I could flash the latest Oreo TWRP flashable build, but that way it won't accept OTAs right?
Any help will be greatly appreciated.
Cheers
guillermohs9 said:
Hi! I currently have NPNS25.137-92 running thanks to a TWRP backup I did before going custom Pie on my G5+. I'd like to go back to stock so that TWRP is removed, bootloader locked and I can take official OTAs up to Oreo or whatever it is. What is the best way to achieve this? I could flash the latest Oreo TWRP flashable build, but that way it won't accept OTAs right?
Any help will be greatly appreciated.
Cheers
Click to expand...
Click to collapse
First thing: You don't have to lock the bootloader to receive and install OTA, this is a widespread fallacy.
And yes, with a TWRP flashable build you won't be able to apply OTA updates.
To get back on track you will have to flash a full fastboot ROM, best would be the latest one available for your region.
Firmwares can be found here:
https://mirrors.lolinet.com/firmware/moto/potter/official/RETAIL/
Oreo builds for the US are ending on 85-17-x (where 17-4 is the latest), for other regions it's 85-13-x , here the latest one is 85-13-5 (December security patch).
You will lose your data so backup your stuff.
Wolfcity said:
First thing: You don't have to lock the bootloader to receive and install OTA, this is a widespread fallacy.
And yes, a TWRP flashable build won't be able to apply OTA updates.
To get back on track you will have to flash a full fastboot ROM, best would be the latest one available for your region.
Firmwares can be found here:
https://mirrors.lolinet.com/firmware/moto/potter/official/RETAIL/
Oreo builds for the US are ending on 85-17-x (where 17-4 is the latest), for other regions it's 85-13-x , here the latest one is 85-13-5 (December security patch).
Click to expand...
Click to collapse
Thanks for your answer, I'm looking but I guess firmwares for my region (retar) are difficult to find. Flashing retus won't affect the usage? Finally, to flash that image you must unzip it and paste that long chunk of fastboot commands I've seen around here right?
guillermohs9 said:
Thanks for your answer, I'm looking but I guess firmwares for my region (retar) are difficult to find. Flashing retus won't affect the usage? Finally, to flash that image you must unzip it and paste that long chunk of fastboot commands I've seen around here right?
Click to expand...
Click to collapse
No, flashing the US variant won't affect usage. It's possible that you don't receive OTA updates in the future anymore because the ones pushed in your region may be for the other update channel. Would be good to find out which Oreo build has been pushed to your region, maybe you can elaborate it via Google.
Yes, you have to unzip the firmware in your adb/fastboot folder on your PC and enter all fastboot commands, you can also use a flashall.bat with all commands in it. You have to copy that bat into your adb/fastboot folder too and just click it.
Here's one:https://www.dropbox.com/s/zfh67uzfle9hsco/flashallO.bat?dl=0
There are some tutorials around how to do it all but some are a bit outdated. I'm about to write an actual one.
You need Motorola drivers on your PC:
https://drive.google.com/file/d/0B0WGdtNWubBJYnlDcWRBZXltanc/view?usp=sharing
and something like Minimal Adb & Fastboot:
https://drive.google.com/file/d/10NEzpxKpYWfq-HdK42ctwoEnCg-BfsRQ/view?usp=sharing
If you're not familiar with this procedure you can also give Lenovo Motorola Smart Assistant a shot:
https://support.lenovo.com/de/de/downloads/ds101291
Wolfcity said:
No, flashing the US variant won't affect usage. It's possible that you don't receive OTA updates in the future anymore because the ones pushed in your region may be for the other update channel. Would be good to find out which Oreo build has been pushed to your region, maybe you can elaborate it via Google.
Click to expand...
Click to collapse
I'm searching for images for retar channel but with no luck. Having flashed retus image, won't I be getting OTA updates pushed on retus?
You should write that tutorial, there is no such thing as too many well written tutorials!
I'm comfortable using fastboot and adb, I just never used them to go back to stock and finding the right firmware for potter seems hard for what I'm reading.
guillermohs9 said:
I'm searching for images for retar channel but with no luck. Having flashed retus image, won't I be getting OTA updates pushed on retus?
You should write that tutorial, there is no such thing as too many well written tutorials!
I'm comfortable using fastboot and adb, I just never used them to go back to stock and finding the right firmware for potter seems hard for what I'm reading.
Click to expand...
Click to collapse
I'll take a look what firmware has been pushed to your region. If you're on the wrong update channel you won't receive OTA updates because Motorola/Lenovo only pushes one update for every location, either the US version (17-x) or the other one (13-x).
I'm writing on that guide but it will be a bit extensive because it should cover unlocking/flashing/rooting/decrypting/locking, the whole thing.
Sorry for interrupting but I would like you have your advise.
I returned from custom pie to 8.1 stock flashed through fastboot. I'm from Belgium, I took the build OPS28.85-17. Reteu channel. This is sept 18 security patch.
I don't receive an ota for an updated security patch.
How can I flash OPS28.85-17-4 without losing data? With some fastboot commands? Wich ones? Tnx for help:good:
BartKey said:
Sorry for interrupting but I would like you have your advise.
I returned from custom pie to 8.1 stock flashed through fastboot. I'm from Belgium, I took the build OPS28.85-17. Reteu channel. This is sept 18 security patch.
I don't receive an ota for an updated security patch.
How can I flash OPS28.85-17-4 without losing data? With some fastboot commands? Wich ones? Tnx for help:good:
Click to expand...
Click to collapse
No need to apologize for interrupting, this is not a private chat. 17-4 is the US firmware, you'll have to change to OPS28.85-13-x to receive OTA updates here in Europe. Even when your "about phone" setting tells you you're on reteu, the firmware number is what makes the difference.
If your main goal is not to lose your data you can flash the 17-4 firmware by fastboot and omit the line "erase userdata". But you still won't receive future OTA updates as you're on the wrong firmware. You can try to flash the latest available fastboot firmware for Europe which is OPS28.85-13-3 and omit the "erase userdata" line too. The source for the firmwares is posted above, it's https://mirrors.lolinet.com/firmware/moto/potter/official/RETAIL/
As written above, a guide how to do it will follow.
The fastboot commands are the same as in the flashall.bat also posted above:
Code:
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash dsp adspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash oem oem.img
fastboot erase cache
fastboot erase userdata
fastboot erase DDR
fastboot oem fb_mode_clear
fastboot reboot
I flashed the retus Oreo firmware you suggested with the commands you uploaded to Dropbox but upon rebooting I get a "No command" screen and it's stuck there.
Edit: flashed Twrp now it says "bad key" on the unlocked device screen but it boots into stock Oreo.
I get the thing about the region. The device still says it's on retar so with retus firmware it will not take OTAs if I understood correctly.
guillermohs9 said:
I flashed the retus Oreo firmware you suggested with the commands you uploaded to Dropbox but upon rebooting I get a "No command" screen and it's stuck there.
Click to expand...
Click to collapse
Have you omitted the "erase userdata" line?
If that screen appears the device seems to be waiting for a reboot.
Edit: Ok, good to hear it's booting now.
The " bad key" screen is normal, you should have seen it after unlocking the bootloader.
Wolfcity said:
Have you omitted the "erase userdata" line?
If that screen appears the device seems to be waiting for a reboot.
Edit: Ok, good to hear it's booting now.
The " bad key" screen is normal, you should have seen it after unlocking the bootloader.
Click to expand...
Click to collapse
It used to say N/A instead. I don't mind. The problem now is that it always tries to boot into recovery.
guillermohs9 said:
....
I get the thing about the region. The device still says it's on retar so with retus firmware it will not take OTAs if I understood correctly.
Click to expand...
Click to collapse
As I said, depends on which firmware has been rolled out in your country.
What's your actual firmware number?
wolfcity said:
as i said, depends on which firmware has been rolled out in your country.
What's your actual firmware number?
Click to expand...
Click to collapse
opss28.85-17-4
guillermohs9 said:
opss28.85-17-4
Click to expand...
Click to collapse
Ok, that's the latest US build, so it can't find OTA now. Btw I don't think that we will see too many updates as the Moto G5+ isn't that new anymore so it's not such a big thing.
I haven't found out which firmware is the right one for your country, if I find out something I'll let you know.
As you said, no need to care about the bad key screen, I just flashed a custom bootlogo to get rid of it.
About booting into recovery, here's a thread about it: https://forum.xda-developers.com/showthread.php?p=74109609#post74109609
First try to wipe cache/dalvik in TWRP.
Than try enter "fastboot oem fb_mode_clear" from PC.
If that doesn't help try the mentioned dd commands from the thread in TWRP terminal.
It's a known problem.
Wolfcity said:
Ok, that's the latest US build, so it can't find OTA now. Btw I don't think that we will see too many updates as the Moto G5+ isn't that new anymore so it's not such a big thing.
I haven't found out which firmware is the right one for your country, if I find out something I'll let you know.
As you said, no need to care about the bad key screen, I just flashed a custom bootlogo to get rid of it.
About booting into recovery, here's a thread about it: https://forum.xda-developers.com/showthread.php?p=74109609#post74109609
First try to wipe cache/dalvik in TWRP.
Than try enter "fastboot oem fb_mode_clear" from PC.
If that doesn't help try the mentioned dd commands from the thread in TWRP terminal.
It's a known problem.
Click to expand...
Click to collapse
Thanks! I figured the same about the future updates, now Motorola is focused on newer devices so december security patch is enough.
I am on stock, unrooted, relocked bootloader now. I used the commands you provided (included erase userdata) then had to flash TWRP, flash magisk, use adb shell and dd to clear that misc partition (so it boots into system), and finally did
fastboot oem lock
fastboot oem lock
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash boot boot.img
fastboot oem lock
to relock bootloader. It works as expected now and it's ready to be used by anyone.
Thanks a lot
Wolfcity said:
No need to apologize for interrupting, this is not a private chat. 17-4 is the US firmware, you'll have to change to OPS28.85-13-x to receive OTA updates here in Europe. Even when your "about phone" setting tells you you're on reteu, the firmware number is what makes the difference.
If your main goal is not to lose your data you can flash the 17-4 firmware by fastboot and omit the line "erase userdata". But you still won't receive future OTA updates as you're on the wrong firmware. You can try to flash the latest available fastboot firmware for Europe which is OPS28.85-13-3 and omit the "erase userdata" line too. The source for the firmwares is posted above, it's https://mirrors.lolinet.com/firmware/moto/potter/official/RETAIL/
As written above, a guide how to do it will follow.
The fastboot commands are the same as in the flashall.bat also posted above:
Code:
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash dsp adspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash oem oem.img
fastboot erase cache
fastboot erase userdata
fastboot erase DDR
fastboot oem fb_mode_clear
fastboot reboot
Click to expand...
Click to collapse
Thanks a lot @Wolfcity
I came from OPS28.85-17, without updates available.
Now I flashed OPS28.85-13 with your instructions not to erase userdata.
Checking for updates: 13.3 available -> installed
13.5 available -> installed and "up to date" security patch dec 2018
:good:
@guillermohs9 @BartKey: Great to hear everything is working! I will add your experiences to the upcoming tutorial.
I received an update Oreo, when I tried to install it failed and displayed a message "Error" and restarted. Help me to update my mobile to latest version. I cleared cache partition, still no luck.
I have unlocked bootloader and on latest stock ROM.
Screenshot attached !!!
ksamm97 said:
I received an update Oreo, when I tried to install it failed and displayed a message "Error" and restarted. Help me to update my mobile to latest version. I cleared cache partition, still no luck.
I have unlocked bootloader and on latest stock ROM.
Screenshot attached !!!
Click to expand...
Click to collapse
Flash the complete stock rom using fastboot and lock the bootloader and then update the device through OTA.
ksamm97 said:
I received an update Oreo, when I tried to install it failed and displayed a message "Error" and restarted. Help me to update my mobile to latest version. I cleared cache partition, still no luck.
I have unlocked bootloader and on latest stock ROM.
Screenshot attached !!!
Click to expand...
Click to collapse
Facing the exact same issue here.I think the latest stock oreo needs locked bootloader to flash
No need to relock the bootloader, but you must revert back to unmodified stock firmware on your device before updating. Without seeing what error it is, it's difficult to say. A locked bootloader strictly enforces having the unmodified stock furnace, which is why an OTA update is more likely to work.
Try this:
1) download the NPJS25.93-14-18 firmware from here: https://forum.xda-developers.com/moto-g4-plus/how-to/stock-rom-npjs25-93-14-4-march-1-t3608138
Only use this if you have not updated to Oreo and you are still on NPJS25.93-14-18.
2)unzip the fastboot ROM, delete any old stock ROMs from your ADB folder and copy the stock ROM over.
3) assuming you had NPJS25.93-14-18 already on your device, flash the firmware with the following instructions - no need for the GPT/bootloader. Ensure you have your data backed up, as you may have to factory reset if you encounter instability.
Code:
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot reboot
That should get your device into an OTA friendly state without erasing your data. If that doesn't work, I suggest waiting for the Oreo fastboot ROM.
I've custom Oreo installed on my phone. Which firmware package should I install?
echo92 said:
No need to relock the bootloader, but you must revert back to unmodified stock firmware on your device before updating. Without seeing what error it is, it's difficult to say. A locked bootloader strictly enforces having the unmodified stock furnace, which is why an OTA update is more likely to work.
Try this:
1) download the NPJS25.93-14-18 firmware from here: https://forum.xda-developers.com/moto-g4-plus/how-to/stock-rom-npjs25-93-14-4-march-1-t3608138
Only use this if you have not updated to Oreo and you are still on NPJS25.93-14-18.
2)unzip the fastboot ROM, delete any old stock ROMs from your ADB folder and copy the stock ROM over.
3) assuming you had NPJS25.93-14-18 already on your device, flash the firmware with the following instructions - no need for the GPT/bootloader. Ensure you have your data backed up, as you may have to factory reset if you encounter instability.
Code:
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot reboot
That should get your device into an OTA friendly state without erasing your data. If that doesn't work, I suggest waiting for the Oreo fastboot ROM.
Click to expand...
Click to collapse
tobey_onk said:
I've custom Oreo installed on my phone. Which firmware package should I install?
Click to expand...
Click to collapse
At the moment, we only have the stock Nougat firmware to revert to - Oreo firmware doesn't seem to be out yet. However, flashing stock Nougat over custom Oreo may appear to come with some risk of losing IMEI, so be careful. You could try the TWRP flashables, be aware the stock ROM is only 32 bit.