Currently using dot os with extreme kernel. Whenever I tried to connect 802.1x network.it goes connecting to saved and same process.please help me how to connect 802.1x EAP network.
Related
Hi
ihave a O2 XDA IIi and an belkin router
the wireless connection is established and my xda recognise the network but i cannot acess internet
what can i do?
go "setting>connection>network card"
and setup a card for your router.
doesn 't work
I TURN ON WIFI ON XDA IIi the connexion recpgnize wi-fi belkin 54g status connected
start settings/connections/network cards
configure wireless network page
belkin 54g connected
networks toaccess
all available
network adapters page
my network card connects to
work
tap an adaptor to modify settings:
NE2000 compatible ethernet driver (configured with all ip adresses and dns)
L2TP NDISWAN miniport
ASYNC MAC NDISWAN MINIPORT
PPTP NDISWAN miniport
tiacxwln compatible wireless ethernet (configured with all ip adresses and dns)
bluetooth pan user driver
is this ok?
i come back on
configure wireless network page
belkin 54g connected
networks toaccess
all available
i click on belkin 54g
this is what it shows
General
network name belkin 54g
connects to work
Network key
authentification open
data encryption wep
the key is provided for me automatically
802.1x
use IEEE 802.1x network accesscontrol
EAP TYPE PEAP
bUT
start settings/connections/wlan
main
status connected
current config
SSid belkin 54g tx rate auto
modeinfrastructur channel 6
bssid 00-11-50-7F-32-74
MAC 00-09-2D-15-3A-A8
IP 192.168.2.4
SIGNAL QUALITY GOOD
SETTINGS
POWER SAVE MODE
AUTO TURN OFFWLAN IF NOT CONNECTED
LEAP
SSID AUTHENTIFICATION TYPE
BLANK BLANK
IS THIS NORMAL?? SHOULD'n it show
belkin 54g??
when the wifi connected
i play iexplorer
when i type an internet adress
the message : the page you are looking forr cannot be found
thanks for your help..
Have the O2 XDA Exec myself, but the settings should be the same, checked with my Acer N50 to make sure
Leap is blank for me too.
some setting differences betweens yours and mine
neither the NE2000 or tiacswln cards have been touched in anyway, left them as default.
mine is set to connect to 'The Internet'
the key is provided for me automatically is unchecked, I manually typed it in with the key index.
use Ieee 802.1x is unchecked
check the belkin setup page, and see if the XDAIIi is staying connected or it is connecting and disconnecting.
looking at the manual, check the Belkin setup page at Firewall/Client IP Filters and make sure the PDA isn't being blocked there. Also check that the Mac Address Filtering is not enabled, if it is, you will need to add the PDA MAC address into it.
Hi Wytey
Thaks a lot, your configuration works perfectly.
Kisses
Hello
have anyone an idea how to get acsess to internet through wpa-psk protected network? My problem is selected "Use IEEE 802.1x network".
Best regards
I did a search and have been unable to find an answer to my question. I recently bought a HTC Juno/Tmobile Shadow and can not get it to connect to my college's wifi network. Does this phone support WPA-Enterprise authentication?
Here are the settings for the network
SSID: Wireless-Pittnet
WPA-Enterprise
TKIP
802.1x enabled
PEAP w/ MS-CHAP V2
my universal now is running Tomal's v10 rom, all goes well, but when I'm trying to connect to my wifi lan, it's discovered by my device as available but never connects.
my wifi lan is hidden (this isn't a problem for my other devices), I allow the universal mac tol connect to the land and I've asigned an specific ip direction inside my lan (as on my other devices)
I've configured my universal as my hermes: network name, as a hidden network, authentication wpa_psk, data encryption tkip, network key ok, use ieee 802.1x network access control marked, and eap type smart card or certificate
I don't know what else to do
Please, I would appreciate some help, dudes
Hi all,
At my work we have a WiFi network with the following settings:
WPA2
PSK Auth
TKIP
WEP-104
The problem is, I can't connect with my HTC Tattoo. It shows the network as WEP and not as WPA2. My home network has WPA2 and I can connect to that one.
Does anyone have an idea to get this to work on my Tattoo? Or is there any update or app to solve this problem?
Many thanks!