Related
I use Micromax A120 8 gb stock kitkat , rooted my phone with kingroot and installed recovery CTR in my phone . I made a backup in my CTR recovery Then I flashed Cleankat Agua based custom ROM I wanted to extend my app storage I tried to repartition my internal memory using mlp rio partition tool ..stuck in a boot loop
Then I did a factory reset wiped chase and Dalvik ...wiped storage from mounts and recovered my backup lost my IMEI ...
when I tried to install cleankat again today its not working after installing only stuck on Cleankat logo
When I tried to restore my backup
can't mount/open cache error
I can't delete system from mounts ..I can't restore my backup either
(WILL FLASHING STOCK ROM USING SP FLASH TOOLS WILL WORK )
HELP ME PLZZZ...
Thank you.....
Rohithdrpl said:
I use Micromax A120 8 gb stock kitkat , rooted my phone with kingroot and installed recovery CTR in my phone . I made a backup in my CTR recovery Then I flashed Cleankat Agua based custom ROM I wanted to extend my app storage I tried to repartition my internal memory using mlp rio partition tool ..stuck in a boot loop
Then I did a factory reset wiped chase and Dalvik ...wiped storage from mounts and recovered my backup lost my IMEI ...
when I tried to install cleankat again today its not working after installing only stuck on Cleankat logo
When I tried to restore my backup
can't mount/open cache error
I can't delete system from mounts ..I can't restore my backup either
(WILL FLASHING STOCK ROM USING SP FLASH TOOLS WILL WORK )
HELP ME PLZZZ...
Thank you.....
Click to expand...
Click to collapse
your problem is solved. iam also face this problem 2 months ago
you made backup in CTR recovery
CWM recovery can't restore CTR recovery backup
flash kitkat stock rom & flash CTR recovery in SPflashtool
then restore your old rom from CTR recovery
your IMEI also recovers, your all data in that backup also recovers in this step
Thank you very much ....yesterday...I flashed stock kitkat with sp flash tool
My phone is now working fine
Sent from my Agua Rio using Tapatalk
I flash Philz Recovery then when I go to recovery mode it says can't open/mount cache/recovery_log
After Flashing stock ROM of canvas A120 and after making the internal memory upto 2 GB by SP flash tool also from XDA now when i tried to install a new ROM so before that i tried to clear the delvik cache and wipe data as well as full factory reset from TWRP recovery it says failed, cant clear delvik cache....now what to do pls guys help me...i want to install other ROM
jayprakash56287 said:
After Flashing stock ROM of canvas A120 and after making the internal memory upto 2 GB by SP flash tool also from XDA now when i tried to install a new ROM so before that i tried to clear the delvik cache and wipe data as well as full factory reset from TWRP recovery it says failed, cant clear delvik cache....now what to do pls guys help me...i want to install other ROM
Click to expand...
Click to collapse
Which ROM do you want to install? Does it comes with a specific recovery,to be flashed, before flashing the rom?
Stock Kitkat of canvas A120
I have installed stock Kitkat from this site and now when i flash TWRP recovery and tried to clear dalvik cache or wipe data it shows error like failed....dont know what to do to install another cleankat custom ROM
speedracer426 said:
Which ROM do you want to install? Does it comes with a specific recovery,to be flashed, before flashing the rom?
Click to expand...
Click to collapse
I have installed stock Kitkat from this site and now when i flash TWRP recovery and tried to clear dalvik cache or wipe data it shows error like failed....dont know what to do to install another cleankat custom ROM
jayprakash56287 said:
After Flashing stock ROM of canvas A120 and after making the internal memory upto 2 GB by SP flash tool also from XDA now when i tried to install a new ROM so before that i tried to clear the delvik cache and wipe data as well as full factory reset from TWRP recovery it says failed, cant clear delvik cache....now what to do pls guys help me...i want to install other ROM
Click to expand...
Click to collapse
CTR recovery working very well iam using CTR recovery ( it is based on CWM recovery ) in my canvas A120
Use other recoveries
Try installing other compatible recoveries. Follow http://forum.xda-developers.com/showthread.php?t=2777619 and try your luck.
Most of the custom ROMs require WIKO base firmware so you have to download WIKO Rainbow stock Kit Kat and flash it (don't worry WIKO rainbow is just a clone of 2 colors so it's fully compatible).
Hi,
I have a problem installing 8.1 oreo roms on my phone. I follow standard procedure: wipe dalvik, cache, system, data -> install rom + gapps -> wipe cache. After my phone restarts, it displays rom logo, but doesn't load (even after 15-20 minutes of waiting). All I can do is load in fastboot and restore my backup. I use twrp 3.2.1-0, unofficial 8.1 pico gapps from 2018/01/30.
So far I tried:
-Installing rom and gapps separately.
-Installing rom, rebooting, installing gapps.
-Installing rom + gapps, then wiping data.
-Installing rom + gapps, then not wiping anything.
-Factory reset, then install rom + gapps.
-Installing rom + different gapps versions.
Additional notes:
-At one point I successfully installed NitrogenOS (about a month ago) and it is my current rom and backup. But I can't clean flash it again.
-When I install rom only (without any gapps) it boots up fine without errors or long loading.
Can anyone help?
Same problem I am also facing. Using Pixel experience ROM but now not able to flash cosmic official rom...remaining on bootanimation
Hi buddy .
TWRP
Wipe Data, Dalvik, Cache , System, Internal Storage
Flash
Rom
Gapps
Wipe to factory reset
Reboot
Done ! That's the only way it worked for me
metro20 said:
Hi buddy .
TWRP
Wipe Data, Dalvik, Cache , System, Internal Storage
Flash
Rom
Gapps
Wipe to factory reset
Reboot
Done ! That's the only way it worked for me
Click to expand...
Click to collapse
Thanks for answer. I tried that method too, but it still didn't work for me. I recently tried clean flash with gapps from https://forum.xda-developers.com/xiaomi-redmi-3s/development/rom-lineageos-15-1-t3718757 and it worked flawlessly. So maybe it's an issue with some gapps packages?
I also have the exact same problem.
Flashing ROM without gapps works perfectly.
adding gapps package, no matter if its pico aroma or mini, it results in stuck on boot animation.
wiping after flashing also did not work.
once made pixel experience boot, using it since...ota update worked without a problem.
any other suggestions?
devito666 said:
I also have the exact same problem.
Flashing ROM without gapps works perfectly.
adding gapps package, no matter if its pico aroma or mini, it results in stuck on boot animation.
wiping after flashing also did not work.
once made pixel experience boot, using it since...ota update worked without a problem.
any other suggestions?
Click to expand...
Click to collapse
Try this nano package https://androidfilehost.com/?fid=889964283620771808. It's the only one that worked for me.
sanchez8096 said:
Try this nano package https://androidfilehost.com/?fid=889964283620771808. It's the only one that worked for me.
Click to expand...
Click to collapse
Thanks for the Link!
But unfortunately still Not booting...tried atomic official and teammexs Rom...
metro20 said:
Hi buddy .
TWRP
Wipe Data, Dalvik, Cache , System, Internal Storage
*then tap back, FORMAT DATA and confirm by typing "yes"
Flash
Rom
Gapps
Magisk stable (if preferred if not next >>>)
Magisk beta (always flash after stable)
Busybox flashable zip (if needed)
Mods such as MIUI cam mod
Font package
Wipe to factory reset
Reboot
After 1st boot
Reboot to TWRP
Install Magisk modules ( USN or Viper4android etc)
Reboot system
Done ! That's the only way it worked for me
Click to expand...
Click to collapse
ftfy. But before this ensure that:-
1. Non corrupted ZIPs. Avoid if possible from using mobile data. A slower yet stable WiFi yields better success rate.
2. Currently this unofficial opengapps' builds works better and are more current.
Suo.Eno said:
ftfy. But before this ensure that:-
1. Non corrupted ZIPs. Avoid if possible from using mobile data. A slower yet stable WiFi yields better success rate.
2. Currently this unofficial opengapps' builds works better and are more current.
Click to expand...
Click to collapse
I didn't need to format data on Oreo nos
As mentioned in other threads on this topic, I just wanted to mention here as well that I am also affected by these Oreo boot loops and haven't found a solution yet. I somehow managed to get PixelExperience to install once, but downgraded now to a Nougat build for other reasons (better battery and GCamMod compatibility).
sanchez8096 said:
Thanks for answer. I tried that method too, but it still didn't work for me. I recently tried clean flash with gapps from https://forum.xda-developers.com/xiaomi-redmi-3s/development/rom-lineageos-15-1-t3718757 and it worked flawlessly. So maybe it's an issue with some gapps packages?
Click to expand...
Click to collapse
Use twrp 3.2.1-0 bcoz some Oreo ROMs aren't flash able by 3.1.1
Sunny Za said:
Use twrp 3.2.1-0 bcoz some Oreo ROMs aren't flash able by 3.1.1
Click to expand...
Click to collapse
I am using 3.2.1-0 twrp. Rom itself flashes fine, it's the gapps that create infinite boot.
Exact Same issue Here...
I have same problem too .. can't boot in to any Oreo ROM with Gapps .. really isn't any solution here?
This might not be a proper solution, but here's what I did:
1) Wipe data, cache, dalvik, system
2) Flash rom + gapps(I used NitrogenOS and pico gapps)
3) Wipe data again and restore data from backup(I restored data from previous build of NitrogenOS, so I don't know if restoring from different rom will be ok)
4) Boot into rom, ignore any "stopped working" errors and go to Settings-System-Reset options-Erase all data(Not sure if this will erase internal storage, backup just in case)
After that phone booted up and and did first time installation.
sanchez8096 said:
This might not be a proper solution, but here's what I did:
1) Wipe data, cache, dalvik, system
2) Flash rom + gapps(I used NitrogenOS and pico gapps)
3) Wipe data again and restore data from backup(I restored data from previous build of NitrogenOS, so I don't know if restoring from different rom will be ok)
4) Boot into rom, ignore any "stopped working" errors and go to Settings-System-Reset options-Erase all data(Not sure if this will erase internal storage, backup just in case)
After that phone booted up and and did first time installation.
Click to expand...
Click to collapse
Can someone upload me some backup? Pixel Experience would be a best ! Thanks a lot
Anyone have an idea what the problem might be?
I'm facing the same problem. I have a Redmi 3S (international, 3GB version). Doesn't matter what Oreo ROM I try (clean install), they all get stuck in bootloop on boot animation. It doesn't get far enough in the boot process to do a logcat with ADB, so I'm not able to post it.
I'm using TWRP 3.2.1-0 but have tried Red Wolf recovery as well and it yields the same results... I don't think it's a gapps issue since I've tried booting several ROMS without installing gapps.
I have rebooted several times while it's still in the boot process, remounted system in TWRP, wiped everything, ...
If anyone has an idea to get the logs, fire away. Can't boot so can't install liveboot or something like that.
bump
any solution?
The Problem still occurs...
Flashed PE successfully once, but since i went Back to official Nougat lineage os, No Oreo Roms can be booted with gapps
HI
i have DAVINCIIN device (indian k20) and im on stock rom MIUI GLOBAL 11.0.2 STABLE (QFJINXM) , First i removed all locks from phone. i downloaded eu rom "HMK20MI9T_20.3.12_v11-10"
to flash rom i wiped my system and data in Orange fox recovery then tried to flash this EU rom but got error 7 due to device not being "DAVINCI" so i changed product id in updater script .(Replaced davinci to davinciin) in whole script. After that flashing was successful but then when i rebooted phone got bootlooped and rebooted to recovery later..Now my storage got encrypted somehow so was not able to flash any zip from recovery so i wiped my internal storage too. then i downloaded evolutionX rom and that too was not working . same things i tried on TWRP recovery but it did not worked.
So atlast i flashed GLOBAL 11.0.2 STABLE (QFJINXM) and phone worked.
So can any one point out what i did wrong. ?
I also tried to install evolutionx again on GLOBAL 11.0.2 STABLE (QFJINXM) by wiping data and system. but that too did not work so back to stock rom again.
Pl help.
To flash . EU ROM you just need to format data. No wipes, only format data, reboot back to recovery and move ROM to internal storage/microSD and flash it. After flashing, just wipe cache/dalvik.
..
VzQzZ said:
To flash . EU ROM you just need to format data. No wipes, only format data, reboot back to recovery and move ROM to internal storage/microSD and flash it. After flashing, just wipe cache/dalvik.
Click to expand...
Click to collapse
tried formatting data, still has the same problem as op, now I'm back to davinciin stock rom
I used xiaomiTool v2 to flash from global to eu, after it flashed I cleared cache and formatted and booted right to the new eu rom.
Hello! Since i got this device, every time i try to install any custom rom, sometimes i have a good luck and one of those works, but other times they dont, i just get an "Android Setup keeps failing" so i cant even do the initial setup. The only roms that worked for me for now are the PE BS and Corvus, i tried LOS, PE, Havoc and almost any other rom and i get this problem, tried roms with and without gapps, different gapps versions and build but i just keep getting this problem.
The way i install a rom its like this:
- Wipe dalvik, data, cache and system
- Format data
- Reboot recovery
- Flash latest fw
- Flash rom
- Reboot Recovery
- Flash magisk
And i just keep getting this issue :c skipping magisk but i just get the same problem. I dont know if someone have or had this problem and know how to solve it.
Thanks in advance!
Arthur King said:
Hello! Since i got this device, every time i try to install any custom rom, sometimes i have a good luck and one of those works, but other times they dont, i just get an "Android Setup keeps failing" so i cant even do the initial setup. The only roms that worked for me for now are the PE BS and Corvus, i tried LOS, PE, Havoc and almost any other rom and i get this problem, tried roms with and without gapps, different gapps versions and build but i just keep getting this problem.
The way i install a rom its like this:
- Wipe dalvik, data, cache and system
- Format data
- Reboot recovery
- Flash latest fw
- Flash rom
- Reboot Recovery
- Flash magisk
And i just keep getting this issue :c skipping magisk but i just get the same problem. I dont know if someone have or had this problem and know how to solve it.
Thanks in advance!
Click to expand...
Click to collapse
When you say "flash latest fw" what do you mean? Latest MIUI firmware? If yes why? You wipe everything just to install the firmware again?
It should be:
- Wipe dalvik, data, cache and system
- Format data
- Reboot to recovery (TWRP)
- Flash ROM
-Flash Gapps if wanted and not included in custom ROM
- Flash magisk
- Boot to system
Sent from my Mi 9T using XDA Labs
Wolfcity said:
When you say "flash latest fw" what do you mean? Latest MIUI firmware? If yes why? You wipe everything just to install the firmware again?
It should be:
- Wipe dalvik, data, cache and system
- Format data
- Reboot to recovery (TWRP)
- Flash ROM
-Flash Gapps if wanted and not included in custom ROM
- Flash magisk
- Boot to system
Sent from my Mi 9T using XDA Labs
Click to expand...
Click to collapse
Yeah thats what i mean, and i flash it everytime because those times that i skipped that the rom didnt even booted, so i just assumed that its necessary. But also, tried the way you say it and still got the same result.
I think that i need to flash MIUI by fastboot for something like a "clean flash" because y tried everything even using the zip to skip the encryption but... Nothing, still the same :c
Arthur King said:
Yeah thats what i mean, and i flash it everytime because those times that i skipped that the rom didnt even booted, so i just assumed that its necessary. But also, tried the way you say it and still got the same result.
I think that i need to flash MIUI by fastboot for something like a "clean flash" because y tried everything even using the zip to skip the encryption but... Nothing, still the same :c
Click to expand...
Click to collapse
Best should be to follow the instructions by the ROM developer,
for example Arrow OS:
How to install:
Reboot to recovery
Wipe System , Cache, ART Cache and Data
Flash the ROM
Flash any addons (GApps, Magisk...)
Format data if you are encrypted
Reboot
(Formatting data is later here)
Or Bliss ROM:
First Time Install / Clean Flash
0. Flash proper firmware, latest firmware for your device variants.
1. Reboot to Recovery
2. Format data
3. Wipe system
4. Flash the ROM (DO NOT WIPE VENDOR, EVER)
5. Reboot to System
6. Reboot to Recovery
7. Flash Magisk (Optional)
8. Reboot to System
Sent from my Mi 9T using XDA Labs
Wolfcity said:
Best should be to follow the instructions by the ROM developer,
for example Arrow OS:
How to install:
Reboot to recovery
Wipe System , Cache, ART Cache and Data
Flash the ROM
Flash any addons (GApps, Magisk...)
Format data if you are encrypted
Reboot
(Formatting data is later here)
Or Bliss ROM:
First Time Install / Clean Flash
0. Flash proper firmware, latest firmware for your device variants.
1. Reboot to Recovery
2. Format data
3. Wipe system
4. Flash the ROM (DO NOT WIPE VENDOR, EVER)
5. Reboot to System
6. Reboot to Recovery
7. Flash Magisk (Optional)
8. Reboot to System
Sent from my Mi 9T using XDA Labs
Click to expand...
Click to collapse
Yeah, i tried that too, like mixing steps, or changing when do i format data, skipping magisk and even on roms without gapps skipping gapps but still get the same results
I just dont know what to do
Arthur King said:
Yeah, i tried that too, like mixing steps, or changing when do i format data, skipping magisk and even on roms without gapps skipping gapps but still get the same results
I just dont know what to do
Click to expand...
Click to collapse
Best may be to ask a ROM developer by PM what could be the problem. I'm still on stock so my knowledge about it is more theoretical.
Sent from my Mi 9T using XDA Labs
edit : nvm wrong thread