Something really strange happened to my K-JAM recently. I installed some text-to-speech program, which name I can't recall right now, because I removed it instantly. The thing is that this program was running in a VERY strange way. The following day the K-JAM fell on the ground and after some time it started to act weird. All of a sudden whole screen gone pale - like when you adjust the TV set for too high lightness. Everything works normal, except for that you can barely see anything on the screen...
Now, what I noticed next, is that the problem appears when I move the keyboard like I was going to extend it. Even small movement is enough to make the screen go pale. To be more specific - it goes pale when I "lock" the k-board in whichever position, not when I "unlock" it. When I turn the divice off and on back again, everything goes back to normal...
Any idea if this would be software or hardware problem? Anyone had something like that? If it just fell on the ground, I'd be sure that it is mechanical problem, but since there was this weird TTS program installed, I wonder if this isn't the case. Could it be, when the problem occurs even after a hard reset?..
Another question perhaps - do you think I should give some new ROM a try?
Which would you recommend?..
If the problem remains after a hard reset then it is not software. Sounds like the fall cocked something up.
You can return it under warranty but if they determine that you caused physical damage then you will end-up paying for it. If you have insurance then that should cover it.
Yeah, I do have insurance. The only problem is that I have to fly all the way to UK to sort it.
Bollox...
Ok so my Cingular 8525 is basically unusable due to the touchscreen thinking it's getting taps in the upper right corner (upper left in landscape mode). This has the nice effect of closing programs down to the today screen in portrait mode or constantly popping up the start menu in landscape mode (about three times a second). Any ideas?
I tried soft resetting and also removing the battery for several minutes. Haven't tried a hard reset as I don't want to go through that except for a last resort. Tried wiping the screen with a soft cloth. There are no weird programs on the device except what everyone here uses.
I still have 5 days before the end of my 30 days return period with Cingular. If I bring it back will they just give me another one?
aroundlsu said:
Ok so my Cingular 8525 is basically unusable due to the touchscreen thinking it's getting taps in the upper right corner (upper left in landscape mode). This has the nice effect of closing programs down to the today screen in portrait mode or constantly popping up the start menu in landscape mode (about three times a second). Any ideas?
I tried soft resetting and also removing the battery for several minutes. Haven't tried a hard reset as I don't want to go through that except for a last resort. Tried wiping the screen with a soft cloth. There are no weird programs on the device except what everyone here uses.
I still have 5 days before the end of my 30 days return period with Cingular. If I bring it back will they just give me another one?
Click to expand...
Click to collapse
on your touchscreen problem.. i have seen this occur by someone improperly putting on a screen protector or maybe there is some dirt up there.. and if you take it back to the store they may give you a new one or make you call the warranty by mail line and get a replacement that way
..... or your OK button could be stuck down
I took a bottle of lens cleaner from my camera bag and thoroughly cleaned the screen. I ran my fingernails under the edge of the screen and really made sure no dirt was under there. Lo and behold, it seems to be working fine now. I browsed some RSS headlines for about 10 minutes with no problems.
Weird though, I have used an Ipaq 4705 WM5 pocket pc for two years now and really ran it through the ringer. It looks like it's been to war and back (which it has in a since) and never experienced errant screen taps. Oh well, still enjoying the 8525 (last phone was 2125).
Thanks so much!
kevino said:
..... or your OK button could be stuck down
Click to expand...
Click to collapse
good point, i had that problem once also, forgot all about it
aroundlsu said:
I took a bottle of lens cleaner from my camera bag and thoroughly cleaned the screen. I ran my fingernails under the edge of the screen and really made sure no dirt was under there. Lo and behold, it seems to be working fine now. I browsed some RSS headlines for about 10 minutes with no problems.
Weird though, I have used an Ipaq 4705 WM5 pocket pc for two years now and really ran it through the ringer. It looks like it's been to war and back (which it has in a since) and never experienced errant screen taps. Oh well, still enjoying the 8525 (last phone was 2125).
Thanks so much!
Click to expand...
Click to collapse
Just a note of caution!!! This is related to the screen alignment issue i.e. the touch sensitive area of the screen continuing beneath the bezel and causing unwanted touches whether through dust or the sticky gasket in there.
May not return, or will be cured again by the "business card" fix / or as you did a firm clean to release the screen from touching the bezel.
But, it's a question for you, if you only have 5 days left under warranty. Most people with the SA problem find the first signs appear in the first couple of weeks. I would certainly put it through it's paces, open up a few applications leave wifi on so it heats up, surf web over wifi etc etc as the added bit of heat generated internally was a known factor in exacerbating the problem. If all stays well over next couple of days maybe it'll be OK.
Would be good to get urgent feedback from anyone with a newer Hermes who's had this issue and what happened.
Mike
Argh, it's back. OK, I'm certain it's a touchscreen problem and not a button sticking as holding down OK will not cause the start menu to pop up while an application is up and holding the windows key will not close an app. Also the problem is delayed if I hold the stylus down on the screen. It's just the upper right (portrait mode) of the screen that is getting the errant screen tap (about three or four times a second).
I've ran a business card through the edges and it doesn't help. I'm not going to take this thing apart. I did that several times with the 2125 to fix unresponsive keys and joystick but the problems always reappear. My one year old 2125 is barely functional now. My g/f would rather keep her crap LG flip phone then inhieret the 2125 after watching me battle it. That's pretty sad.
I'm going to try a hard reset (second one in three weeks) and if that doesn't help I'm returning it to Cingular and getting my money back. Then I'll either buy another one or a blackjack. I like the 3g and love this device. It's my third Windows Mobile 5.0 product. I don't like the sub-par build quality on my second HTC product now. I paid $599 plus tax for this phone at a local Cingular store (despite the web store saying $550).
My advice for what it's worth is take it back. This screen business has a habit of coming and going and it's entirely possible you hard reset and everything is fine and two weeks later it's back. Also would be better to return with the issue present (not that they wouldn't believe you -would they?)
On the whole though this problem is much more rare than it was, so if you do get the same device again hopefully you will be luckier. If you get directly from shop though check the firmness of the key board clicking into place that seems to still be fairly common problem.
Not the best start to the new year!!
Mike
Well I got desperate and hard reset... I could barely get past the screen alignment startup so needless to say that didn't fix things. Having gone this far and thoroughly pissed at having to reinstall everything I decided to loosen those screws on the back and run a card around the edges.
So far, it's working! I'm not content settling on this hack though so I'm bringing it back Tuesday and will update on my experience at the retail store (not looking forward to that).
Happy new year and thanks for all the super fast responses guys!
Alignment
I was browsing the www the other day and saw a korean/ japanese site showing the inside of these precious devices, and (as pointed out above) how the seal/ gasket underneath the bezel is the root cause of our anguish.
There were some detailed pics of how you can DIY, and remove the gasket, but it's no where near me basic level of competency.
Why would they design a touch-screen to big for the device I wonder???
there is also the business card trick about sliding it underneath the edges to loosen the gasket... there is a whole thread on this screen alignment issue
what site shows how to fix the gasket?
There is a post about someone seeing a site showing how to fix the gasket proplem on the touch screen. Could I please get the URL??
johniz1967 said:
There is a post about someone seeing a site showing how to fix the gasket proplem on the touch screen. Could I please get the URL??
Click to expand...
Click to collapse
Look down this page. Keep in mind non of the theoretical solutions is guaranteed/
http://wiki.xda-developers.com/index.php?pagename=Hermes_Problems
Mike
Just got back in from my local Cingular store and actually had a pleasant, hassle-free experience exchanging my 8525 for a brand new one. I explained to the CSR the issue and she immediately understood the problem (must not be the first guy walking in there about this).
Unfortunately, she didn't have any in stock but merrily called around and found six others in stock at nearby stores. So off I went to the next store and had the old 8525 exchanged for a new one in less then ten minutes. The CSR didn't even bother to look at the old phone or check the accessories I returned with it.
The new 8525 is syncing up as I write this and immediately I notice some things are different. First of all, written on the side of the box is 12/26. So we know this phone is probably brand new. The keyboard does indeed click in and out more firmly then my old one. The USB cable plugs in tighter (a good thing, I was always getting USB connection problems), and lo and behold Windows Vista installed HTC sync drivers then Media Player automatically recognized the device (never did any of that on the old one).
I'm using the Windows Mobile Device Center Beta on Vista RTM and it just finished syncing without any problems. Moral of this story is if your 8525 is experiencing any problems at all and you are within 30 days, return it for a hassle free refund.
Good news and you're absolutely right about getting it back within warranty if there's a fault.
Great stuff!
Mike
aroundlsu said:
Just got back in from my local Cingular store and actually had a pleasant, hassle-free experience exchanging my 8525 for a brand new one. I explained to the CSR the issue and she immediately understood the problem (must not be the first guy walking in there about this).
Unfortunately, she didn't have any in stock but merrily called around and found six others in stock at nearby stores. So off I went to the next store and had the old 8525 exchanged for a new one in less then ten minutes. The CSR didn't even bother to look at the old phone or check the accessories I returned with it.
The new 8525 is syncing up as I write this and immediately I notice some things are different. First of all, written on the side of the box is 12/26. So we know this phone is probably brand new. The keyboard does indeed click in and out more firmly then my old one. The USB cable plugs in tighter (a good thing, I was always getting USB connection problems), and lo and behold Windows Vista installed HTC sync drivers then Media Player automatically recognized the device (never did any of that on the old one).
I'm using the Windows Mobile Device Center Beta on Vista RTM and it just finished syncing without any problems. Moral of this story is if your 8525 is experiencing any problems at all and you are within 30 days, return it for a hassle free refund.
Click to expand...
Click to collapse
since your appears to be new from 12/26.. i am curious what firmware is on that phone.. details please
Cingular 8525 touch screen no working
I am having a problem with the touch screen on my 8525. My phone was working fine then the then the screen stopped responding. I was able to navigate via keyboard but that was it. I did a soft reset and it did not help. I then did a hard reset and the screen went to the setup and wants to align the screen which obviously I cannot do.
The changes I have made the same day prior to it not working are as follows:
-Unlocked with Hermes SIM Unlock
-Installed latest Cingular ROM
-Installed fit4cat Hermes Tweaker v1.1a
The phone worked fine for about 12 hrs before the touch screen stopped working.
Any suggestions?
Hey there, I have had the problem before (about 3.5 weeks ago). I had to send it in for service (since I am not a Cingular customer anymore but use the 8525 with T-mobile).Good luck.
wedgesurfer said:
I am having a problem with the touch screen on my 8525. My phone was working fine then the then the screen stopped responding. I was able to navigate via keyboard but that was it. I did a soft reset and it did not help. I then did a hard reset and the screen went to the setup and wants to align the screen which obviously I cannot do.
The changes I have made the same day prior to it not working are as follows:
-Unlocked with Hermes SIM Unlock
-Installed latest Cingular ROM
-Installed fit4cat Hermes Tweaker v1.1a
The phone worked fine for about 12 hrs before the touch screen stopped working.
Any suggestions?
Click to expand...
Click to collapse
Long story short, I bought an extended battery kit from eBay, whilst being marked as being compatible with my Universal (T-Mobile MDA Pro) it didn't quite fit and ever since my Universal has been crashing.
It seems to be linked to physical movement, rotating the screen or anything more than a gentle tap makes it crash; either by LCD corruption or by a teal-screen-of-death (think of the default desktop colour of windows 98).
Once in every maybe 10 attempts I can get it to start up with the screen in portrait mode and then put it in my cradle to use for sat nav, but any attempt to use it for anything else results in a lock-up.
I removed the one screw that holds the LCD unit to the hinge and moved that around a little whilst I'd got it to boot up and it didn't crash, however touching the base with anything more than a feather touch makes it crash so I'm pretty sure the LCD unit is a-okay but the base has the problem. I have not and will not unscrew the base unit because I don't want to void the warranty unless it's a sure guarantee I can fix the problem.
The company that sold me the battery (for now I'm not naming them because they may still rectify my fault) said they'd take the battery and the universal back for analysis but they won't give me a guarantee that they'll get it fixed, they want to send it off to a repair center and personally I'm wary of trusting them to give a fair response.
Does anyone know if there's a way to rectify this fault? It's pretty much rendered my Universal a brick, I'd love to get it working again can anyone advise?
Hi all
[Originally posted this in the Verizon Note 4 forum accidentally, so apologies if you've seen it already]
My Note 4 screen has started locking up (i.e. continuing to work in the background and the screen is still responding to system events (SMS notifications etc) but it is not responding to touch.
I have tried several factory resets, after which the screen stays responsive for about 3 or 4 pages, then locks up again.
Background: the phone was rooted about a year ago, to get around the SD card restriction, and has worked fine up until the last week. I gave the phone to a friend who put CWM-based recovery manager and the latest Samsung Android 5.1.1 on it. After setting the phone up successfully and downloading all my apps on to it and getting everything running perfectly, I used CWM to back up the OS image onto the SD card.
Phone worked great for about a day, then started freezing. Wiping the caches / restoring / factory resets and all permutations of these have so far proved ineffective...
I took the phone in to a repair shop last night, the guy reckoned the problem was down to a poor screen replacement, and they hadn't used the correct bonding cement, and that the screen had separated from the LCD such that capacitance couldn't do its thing.
However if this were the case, the screen would not work at all, even briefly after a system reset.
The repairer is simply dismantling and rebuilding the phone to see if it's a loose/dirty connector somewhere. He's not going to try to fix it with firmware/software.
Any pointers or suggestions gratefully received
Vaughan
I was getting stutters like this, and after a month my phone started shutting down when I hit 50% or so. I replaced the battery off eBay, and that cleared the problem up. I think sine quickcharge 2.0 batteries fail faster than they should, but a Sammy battery is only $6.50 or so, so I don't mind buying one more often fir the quickcharge benefits.
Maybe try a new battery?
Samsung original screen replacements always come with AMOLED+Touchscreen.
If the guy only replaced the touchscreen you have a fake one and yeah i don't need to tell you about chinese replica's quality.
I myself work at a smartphone repair shop and we only use original products to get the best quality for our customers. It's more expensive that way i know but thats better than putting sh*t in there ands the customer needs to come back with the phone.
SquirtingCherry said:
Samsung original screen replacements always come with AMOLED+Touchscreen.
If the guy only replaced the touchscreen you have a fake one and yeah i don't need to tell you about chinese replica's quality.
I myself work at a smartphone repair shop and we only use original products to get the best quality for our customers. It's more expensive that way i know but thats better than putting sh*t in there ands the customer needs to come back with the phone.
Click to expand...
Click to collapse
Thanks for that Mr Cherry..
So it's the dodgy glass doing it? It's definitely not the genuine Samsung part as it gets covered in grease as soon as you touch it.
The weird thing is, if it was the glass then I'd assume it wouldn't work at all; whereas when I do a factory reset it works for a short while then stops...
Baffling.
Hello. I want to start off and say that even tho i used a lot of phones Samsung fits me bets. With that in mind i want to tell the story of my broken s4 i9505. I bought it new and used it about 2 years until i got and iphone 5s. The phone remaind in a drawer with the intention of selling some time but forgot about it, then i used the phone once a week or so paired with moto 360 because iphone could not connect and used the watch only for time .(bluetooth worked fine remember this). Anyway i decided to sell it and i had all my apps and accounts in there so i thought the fastest way was to factory reset it and make it fresh so i can sell it (rom was not stock at the moment, i have no ideea what rom it was). I sold it to a friend that told me he wanted to pair something with it thru bluetooth and bluetooth didnt work...i sayd that it wasnt possible because all i did was a factory reset and that couldn't damage anything. Things got worse as the phone was charging very very slow and if it got over 90% baterry would not respond to anything (red led at 90% and got to green when full but still no response from phone) and the only thing to do is to remove battery. Then i took the phone back, got it a new battery but that didn't changed anything, took it to some repairs shops that didn't ever hear about this problem, i had it chance the software but that didn't do anything. The problem i suspect it is and i saw a few other posts online was the bluetooth module would stop working for some reason and do this to the phone. Currently i don't know what to do with it and i don't want to sell it just for part for 50 euros or so. Also i read that the bluetooth module can't really be changed as a spare part because it's part of the motherboard and that means almost all the phone. Phone is in mint condition, i didn't damage it before the sell , the buyer didn't damage it or messed with the rom...Another thing i noticed is that in settings under bluetooth address says unavailable. Can someone please help me ? I can provide more information about serials and stuff if needed. Also wi-fi doesn't work now.
Mine also show unavailable under Bluetooth address, but it works.
Are you currently on the stock rom?
Yes is stock. Android version 5.0.1 I9505XXUHOJ2. If i toggle bluetooth on says starting bluetooth then after 5 seconds it disables. I guess the problem is from hardware not software. So fast battery drain is not normal something is using a lot of energy.
As far as I know, the Wi-Fi and Bluetooth modules are in the same physical chip, therefore something might be physically broken. Here's a clip I came across while trying to fix my phone's Wi-Fi and I think it's exactly what might fix yours. (Should be very cheap to do too.) I think basically what he's doing is putting some flux on the board then reflowing it with the hot air gun.
Before taking that step, be sure to exhaust the possible software fixes. I'm not sure, but updating the bootloader and modem MIGHT fix it.
My wi-fi started working again it just took a while but the bluetooth does exactly the same as in the clip so maybe that's the problem. I don't understand why does so glue over it make it work...also for me it's hard to turn the phone off because the screen goes black but the blue led still stays on and the only way to turn it off completly is to take out battery. Maybe this will solve the battery problem aswell ?