Related
Is there any separate supersu versions for moto x play marshmallow i tried the supersu beta 2.52 And 2.56 but the phone is stuck in bootloop need help to root marshmallow moto x play
you need supersu 2.62
Worked perfect
That worked perfect mate thanks for the quick reply cheers :good::good:
How did you flashed the 2.62 zip file if when you get to recovery, TWRP don't recognize the file, no matter the folder where you put it.
That is what happens to me. Any advice?
iZak17 said:
How did you flashed the 2.62 zip file if when you get to recovery, TWRP don't recognize the file, no matter the folder where you put it.
That is what happens to me. Any advice?
Click to expand...
Click to collapse
I Use TWRP 2.7.8v2 when you prompted to install TWRP SuperSU not install and reboot
2.62 SuperSU the latest I think there are two
2.61 and 2.62 are working. Not clear with 2.60
Versions before 2.52 doesn't work
Hey sombody plz help me to get through this,I installed the OTA then I unlocked bootlocker and installed the custom recovery twrp 2.8.7v2 ....then I tried to install the SuperSU....but after flashed it through twrp,I was stucked at "Warning Bootlocker Unlocked" screen for like 15 min,so then I tried to clear cache and then reboot....But that also not help,Then i tried format all the data and tried to to strt in factory mode.but still stucked at same screen.Now what should I do to get into the phone ?PLz ....its urgent
anks095 said:
Hey sombody plz help me to get through this,I installed the OTA then I unlocked bootlocker and installed the custom recovery twrp 2.8.7v2 ....then I tried to install the SuperSU....but after flashed it through twrp,I was stucked at "Warning Bootlocker Unlocked" screen for like 15 min,so then I tried to clear cache and then reboot....But that also not help,Then i tried format all the data and tried to to strt in factory mode.but still stucked at same screen.Now what should I do to get into the phone ?PLz ....its urgent
Click to expand...
Click to collapse
Sounds like you installed a version prior to 2.61. You can transfer it to your phone when in TWRP. Try flashing it and rebooting, if that doesn't work you'll have to do a full restore from your backup and reboot, then flash Supersu 2.62.
anks095 said:
Hey sombody plz help me to get through this,I installed the OTA then I unlocked bootlocker and installed the custom recovery twrp 2.8.7v2 ....then I tried to install the SuperSU....but after flashed it through twrp,I was stucked at "Warning Bootlocker Unlocked" screen for like 15 min,so then I tried to clear cache and then reboot....But that also not help,Then i tried format all the data and tried to to strt in factory mode.but still stucked at same screen.Now what should I do to get into the phone ?PLz ....its urgent
Click to expand...
Click to collapse
Install firmware and use supersu 2.62
Enviado desde mi XT1563 mediante Tapatalk
flopezm said:
i use twrp 2.7.8v2 when you prompted to install twrp supersu not install and reboot
2.62 supersu the latest i think there are two
Click to expand...
Click to collapse
did u find the reason ???
flopezm said:
Install firmware and use supersu 2.62
Click to expand...
Click to collapse
Could you elaborate on this? Install which firmware?
Dekztyr said:
Could you elaborate on this? Install which firmware?
Click to expand...
Click to collapse
flash the twrp flashable stock 6.0 and then flash su.62
bablu048 said:
twrp flashable stock 6.0
Click to expand...
Click to collapse
Great, thanks! Any idea where I might find that?
Dekztyr said:
Great, thanks! Any idea where I might find that?
Click to expand...
Click to collapse
Here forum.xda-developers.com/moto-x-play/general/rom-xt1563-brasil-stock-6-0-twrp-t3272979
Just search in the General section you'll be amazed by what you can find.
Is there a working version for 6.0.1? I've been trying to root for hours and nothing. Every time I install SuperSU (I've tried 2.65 and 2.74) it will softbrick my phone, making it stuck at the bootloader warning message, forcing me to flash install stock rom and go through the fresh install every time.
Any one plz help me .i have installed Twrp 3.0.2 and after installing supersu 2.65 i have lost my base band data .i have installed the stock rom and tried to install supersu 2.62 and 2.46 but no use again i have lost my base band data.plzz help me to root my device with out losing base band data??
After reading some threads someone said you can install and use all the latest su versions by installing it systemless. You must open the terminal command in twrp recovery and type this:
echo "SYSTEMLESS=true" >> /data/.supersu
After this you should be able to flash all newest/latest versions.
is this sure?has anyone tryied it?I can't run an app that needs latest supersu.I am on 2.62-3.
kos25k said:
is this sure?has anyone tryied it?I can't run an app that needs latest supersu.I am on 2.62-3.
Click to expand...
Click to collapse
Im now running su 2.71 after installing it systemless. Before I tried this my ROM stucked in a bootloop.
so with 2.71 is ok?
mmmm I read some weird things such as loose root when f.reset http://m.supersuroot.com/
Hello Friends,
I have successfully Installed the latest 13.1 using TWRP tuga power recovery.
After that I tried to root the phone with super 2.65 stable version in recovery mode but the Root is not happening.
Even I have tried it with SuperSU 2.74 but the process happens Successfully but when the system is booted , I checked the root access with root checker , It says Phone is not rooted.
Please Help! Thank you
srink.007 said:
Hello Friends,
I have successfully Installed the latest 13.1 using TWRP tuga power recovery.
After that I tried to root the phone with super 2.65 stable version in recovery mode but the Root is not happening.
Even I have tried it with SuperSU 2.74 but the process happens Successfully but when the system is booted , I checked the root access with root checker , It says Phone is not rooted.
Please Help! Thank you
Click to expand...
Click to collapse
flash it and don't wipe the data partition after it
srink.007 said:
Hello Friends,
I have successfully Installed the latest 13.1 using TWRP tuga power recovery.
After that I tried to root the phone with super 2.65 stable version in recovery mode but the Root is not happening.
Even I have tried it with SuperSU 2.74 but the process happens Successfully but when the system is booted , I checked the root access with root checker , It says Phone is not rooted.
Please Help! Thank you
Click to expand...
Click to collapse
Flash BETA-SuperSU-v2.67-20160121175247.zip in recovery.
Download:
https://download.chainfire.eu/897/SuperSU/BETA-SuperSU-v2.67-20160121175247.zip
srink.007 said:
Hello Friends,
I have successfully Installed the latest 13.1 using TWRP tuga power recovery.
After that I tried to root the phone with super 2.65 stable version in recovery mode but the Root is not happening.
Even I have tried it with SuperSU 2.74 but the process happens Successfully but when the system is booted , I checked the root access with root checker , It says Phone is not rooted.
Please Help! Thank you
Click to expand...
Click to collapse
please tell me how did you do it. i wanna updte with TWARP too from cm13 to cm13.1
darkerm said:
please tell me how did you do it. i wanna updte with TWARP too from cm13 to cm13.1
Click to expand...
Click to collapse
Off Topic, but in this thread http://forum.xda-developers.com/oneplus-one/general/official-cm11s-roms-ota-updates-t2906746, you will find signed flashable zips for 13.1 which can be flashed from TWRP.
ashwin.kj said:
Off Topic, but in this thread http://forum.xda-developers.com/oneplus-one/general/official-cm11s-roms-ota-updates-t2906746, you will find signed flashable zips for 13.1 which can be flashed from TWRP.
Click to expand...
Click to collapse
when I flash te full signed 13.1 update I lose my root. and if I flash SU I get bootloop
darkerm said:
when I flash te full signed 13.1 update I lose my root. and if I flash SU I get bootloop
Click to expand...
Click to collapse
Loosing root is expected. Next time you upgrade your ROM, you can try using FireFlash or something similar to try and retain root. But regarding bootloop I am not sure. I usually flash the ROM and gapps and let it boot. If everything is working, then only I flash superSU. Which version are you flashing anyways?
I did a clean reset and installed a fresh android 9. So no root, nothing.
Anyways I install magisk 5.8.3 and then tried to patch the boot.img from the android 9 factory image.
But every time I select the boot.img and try to patch it, it says "Failed! ! Installion failed!".
How has everyone else tried to install magisk on android 9?
xringo said:
I did a clean reset and installed a fresh android 9. So no root, nothing.
Anyways I install magisk 5.8.3 and then tried to patch the boot.img from the android 9 factory image.
But every time I select the boot.img and try to patch it, it says "Failed! ! Installion failed!".
How has everyone else tried to install magisk on android 9?
Click to expand...
Click to collapse
Not the way you are doing it. I boot to TWRP, without installing it and have TWRP install the full zip.
Hm I'll try this. Used to the boot patching.
xringo said:
Hm I'll try this. Used to the boot patching.
Click to expand...
Click to collapse
Just dirty flashed 9 over dp5, booted to twrp and flashed magisk. Rooted, and all appears well.
lorax70 said:
Just dirty flashed 9 over dp5, booted to twrp and flashed magisk. Rooted, and all appears well.
Click to expand...
Click to collapse
You can give link file magisk for use on android 9.
newyesor said:
You can give link file magisk for use on android 9.
Click to expand...
Click to collapse
Fwiw. I've been using this magisk version for dp3-5, but there are newer versions, but 16.4 works for me...
https://thedroidarena.com/download-magisk-16-4-beta/
I may try a newer version at some point, but I'm in no rush.
newyesor said:
You can give link file magisk for use on android 9.
Click to expand...
Click to collapse
Got this from the Flash kernel thread. It works fine on Pie :good:
https://drive.google.com/file/d/106ZiqeQxNYtCHkOEc6niuHRcWiCzG_eA/view?usp=drivesdk
xringo said:
I did a clean reset and installed a fresh android 9. So no root, nothing.
Anyways I install magisk 5.8.3 and then tried to patch the boot.img from the android 9 factory image.
But every time I select the boot.img and try to patch it, it says "Failed! ! Installion failed!".
How has everyone else tried to install magisk on android 9?
Click to expand...
Click to collapse
Make sure your using 16.7 you have to change in setting to beta. Same thing happened to me trying to use 16.0
I get updater error :2 failed to install every freaking time. No matter what zip i use. 1600 1671 1674
After dirty flash (remove -w) Android 9 PPR1 then install Magisk 16.7, it seems I am not able to set PIN or any security... Anyone has the same issue?
I have the same issue TWRP also can't decript the phone. I am going to wipe everything, and fastboot erase userdata.
lssong99 said:
After dirty flash (remove -w) Android 9 PPR1 then install Magisk 16.7, it seems I am not able to set PIN or any security... Anyone has the same issue?
Click to expand...
Click to collapse
Sent from my Pixel 2 XL using Tapatalk
Airpil said:
I have the same issue TWRP also can't decript the phone. I am going to wipe everything, and fastboot erase userdata.
Sent from my Pixel 2 XL using Tapatalk
Click to expand...
Click to collapse
Don't wipe your phone! Just flash the new boot.img from the image file (not OTA file) and you will be able to go back to your Android system and disable the pin. After disable the pin, boot into TWRP and flash the Magisk from here https://forum.xda-developers.com/showpost.php?p=77240449&postcount=2832
Hope this helps!
madmuthertrucker said:
I get updater error :2 failed to install every freaking time. No matter what zip i use. 1600 1671 1674
Click to expand...
Click to collapse
Use magisk uninstall first and this should solve the issue.
lssong99 said:
After dirty flash (remove -w) Android 9 PPR1 then install Magisk 16.7, it seems I am not able to set PIN or any security... Anyone has the same issue?
Click to expand...
Click to collapse
I have flashed ota from dp5 and fresh install of 9 and I cannot use security with 3.2.1_2 or 3.2.2 TWRP
Brakiss said:
I have flashed ota from dp5 and fresh install of 9 and I cannot use security with 3.2.1_2 or 3.2.2 TWRP
Click to expand...
Click to collapse
There's a 3.2.3-0 out as well. It's reportedly able to decrypt using alphanumeric codes. However a straight 4 number pin still isn't working for me.
Badger50 said:
There's a 3.2.3-0 out as well. It's reportedly able to decrypt using alphanumeric codes. However a straight 4 number pin still isn't working for me.
Click to expand...
Click to collapse
Where did you see this? I have pattern and would like to keep it.
Brakiss said:
Where did you see this? I have pattern and would like to keep it.
Click to expand...
Click to collapse
One of the other threads. Here's the twrp version though. https://dl.twrp.me/taimen/
Been having issues myself since updating to Pie yesterday. TWRP installed working fine. Installed magisk manager, set to beta channel. Rebooted into TWRP and flashed magisk 16.7, phone hanging at the lovely google logo page. I then have to run the uninstaller back in TWRP or i cant get the phone to boot. Anyone had this?
pr1vate piles said:
Been having issues myself since updating to Pie yesterday. TWRP installed working fine. Installed magisk manager, set to beta channel. Rebooted into TWRP and flashed magisk 16.7, phone hanging at the lovely google logo page. I then have to run the uninstaller back in TWRP or i cant get the phone to boot. Anyone had this?
Click to expand...
Click to collapse
Yeah, rooting on P is a little tricky it seems. You'll likely have to run the uninstaller, then boot up. Then go back to twrp and flash this version of magisk. It's the 16.7(4) version found in the Flash kernel thread :good:
https://drive.google.com/file/d/106ZiqeQxNYtCHkOEc6niuHRcWiCzG_eA/view?usp=drivesdk
Badger50 said:
Yeah, rooting on P is a little tricky it seems. You'll likely have to run the uninstaller, then boot up. Then go back to twrp and flash this version of magisk. It's the 16.7(4) version found in the Flash kernel thread :good:
https://drive.google.com/file/d/106ZiqeQxNYtCHkOEc6niuHRcWiCzG_eA/view?usp=drivesdk
Click to expand...
Click to collapse
Your not wrong there. Tried it as you suggested, same thing, hanging at the G logo page with the bar animation under it. Had to run the uninstaller to get back into my phone. Very odd
Hey Guys
I am using Mi a1 with Pixel Experience custom ROM.Accidently my phone root removed.Now i am trying to root my phone.But i Can't.When i flash Magisk zip file with twrp.Its successfully install.But when i reboot my phone,Magisk says not install.
Somebody please help in this problem.
jubayertonu said:
Hey Guys
I am using Mi a1 with Pixel Experience custom ROM.Accidently my phone root removed.Now i am trying to root my phone.But i Can't.When i flash Magisk zip file with twrp.Its successfully install.But when i reboot my phone,Magisk says not install.
Somebody please help in this problem.
Click to expand...
Click to collapse
Reboot your decide again. Then see Magisk shows or not!
Shubham2509 said:
Reboot your decide again. Then see Magisk shows or not!
Click to expand...
Click to collapse
Shows "Magisk not install"
jubayertonu said:
Hey Guys
I am using Mi a1 with Pixel Experience custom ROM.Accidently my phone root removed.Now i am trying to root my phone.But i Can't.When i flash Magisk zip file with twrp.Its successfully install.But when i reboot my phone,Magisk says not install.
Somebody please help in this problem.
Click to expand...
Click to collapse
Go to TWRP > flash Magisk uninstaller zip > reboot to system > go again to TWRP > flash Magisk installer zip.
Hi,
Today I try to install MIUI 11 by OTA.
But at the installation, i've the error update.zip failed and canceled the process.
My phone is an MI9T, unlocked and root.
I thought to install it by TWRP, but i can't find the rom file.
Did you have somes advices to solve this problem ?
Thanks in advance.
Try to uninstall root, I had the same issue and without root it worked without an issue...
robi10101298 said:
Try to uninstall root, I had the same issue and without root it worked without an issue...
Click to expand...
Click to collapse
Okay I will try.
Stupid question, but how did you uninstall root pls ?
Spy20 said:
Okay I will try.
Stupid question, but how did you uninstall root pls ?
Click to expand...
Click to collapse
Download magisk uninstaller and flash it via twrp.
Don't install the ota update twrp tho
Benfatica said:
Download magisk uninstaller and flash it via twrp.
Don't install the ota update twrp tho
Click to expand...
Click to collapse
I just clicked on uninstall and it worked...
all day long I encountered several problems, so the phone did not want to start on the rom anymore.
so after a few galley factory reset then reinstall MIUI10 with save and next finally upgrade to MIUI 11 I hope
thanks for your advices again