Has anyone successfully compiled a kernel that has these specific drivers implemented into them? I try to compile the kernel myself (The ones directly from samsung themselves for 5.0 Lollipop) and it always tell's me to make clean. Once done then it wipes out my driver setting I had set to compile the kernel with and pushes the kernel back to stock settings. I am attempting to get my TP-LINK W722N working with Kali (Linux Deploy) via USB OTG.
This is not my work
the original developer is mzo
I want to share Kali nethunter for kenzo to use it nougat roms
This is an unofficial port of Kali NetHunter for Xiaomi Redmi Note 3.
Official site of kali https://www.kali.org/
A project by Offensive Security
The Kali Linux NetHunter project is the first Open Source Android penetration testing platform, created as a joint effort between the Kali community member “BinkyBear” and Offensive Security. NetHunter supports Wireless 802.11 frame injection, one-click MANA Evil Access Point setups, HID keyboard (Teensy like attacks), as well as BadUSB MITM attacks – and is built upon the sturdy shoulders of the Kali Linux distribution and toolsets.
802.11 Wireless Injection and AP mode support with multiple supported USB wifi cards.
Capable of running USB HID Keyboard attacks, much like the Teensy device is able to do.
Supports BadUSB MITM attacks. Plug in your Nethunter to a victim PC, and have your traffic relayed though it.
Contains a full Kali Linux toolset, with many tools available via a simple menu system.
USB Y-cable support in the Nethunter kernel – use your OTG cable while still charging your Nexus device!
Software Defined Radio support. Use Kali Nethunter with your HackRF to explore the wireless radio space.
Documentation and Attack Descriptions
Attack descriptions as well as some documentation to get you started with the installation and setup of Kali NetHunter can be found at https://github.com/offensive-securit...nethunter/wiki
-Downloads :
-[Kalifs full]: https://www.androidfilehost.com/?fid=745425885120724463
Mirror
https://drive.google.com/file/d/0BzM1YuO3yLiQaGhNRTRwLVVueEk/view?usp=drivesdk
-Instructions :
Flash nethunter-kenzo-marshmallow-kalifs-full.
(Kernel patch included in zip)
this is only for nougat based roms so flash on lineage is based roms
I installed on nitrogen is works good
Reboot
if go in bootloop it is completely normal, wait a few minutes
[email protected] said:
This is not my work
the original developer is mzo
I want to share Kali nethunter for kenzo to use it nougat roms
This is an unofficial port of Kali NetHunter for Xiaomi Redmi Note 3.
Official site of kali https://www.kali.org/
A project by Offensive Security
The Kali Linux NetHunter project is the first Open Source Android penetration testing platform, created as a joint effort between the Kali community member “BinkyBear” and Offensive Security. NetHunter supports Wireless 802.11 frame injection, one-click MANA Evil Access Point setups, HID keyboard (Teensy like attacks), as well as BadUSB MITM attacks – and is built upon the sturdy shoulders of the Kali Linux distribution and toolsets.
802.11 Wireless Injection and AP mode support with multiple supported USB wifi cards.
Capable of running USB HID Keyboard attacks, much like the Teensy device is able to do.
Supports BadUSB MITM attacks. Plug in your Nethunter to a victim PC, and have your traffic relayed though it.
Contains a full Kali Linux toolset, with many tools available via a simple menu system.
USB Y-cable support in the Nethunter kernel – use your OTG cable while still charging your Nexus device!
Software Defined Radio support. Use Kali Nethunter with your HackRF to explore the wireless radio space.
Documentation and Attack Descriptions
Attack descriptions as well as some documentation to get you started with the installation and setup of Kali NetHunter can be found at https://github.com/offensive-securit...nethunter/wiki
-Downloads :
-[Kalifs full]: https://www.androidfilehost.com/?fid=745425885120724463
-Instructions :
Flash nethunter-kenzo-marshmallow-kalifs-full.
(Kernel patch included in zip)
this is only for nougat based roms so flash on lineage is based roms
I installed on nitrogen is works good
Reboot
if go in bootloop it is completely normal, wait a few minutes
Click to expand...
Click to collapse
Can I flash this .zip on omnirom? Is it full working without any issue?
overcustom said:
Can I flash this .zip on omnirom? Is it full working without any issue?
Click to expand...
Click to collapse
Yes but take nandroid backup just in case
Can I flash custom kernels on Nethunter???
Or flash magisk instead of SuperSU that is preinstaled.
Sent from my Redmi Note 3 using XDA Labs
AliGulzar-AF said:
Can I flash custom kernels on Nethunter???
Or flash magisk instead of SuperSU that is preinstaled.
Sent from my Redmi Note 3 using XDA Labs
Click to expand...
Click to collapse
I have tried it works but you will need to complete. It's first boot then open net Hunter. App all good then go to SuperSU click on full unroot then go to recovery forcefully then flash magisk then kernel which you want
Then reboot but I am getting. Cts profile mismatch
Here is video
https://youtu.be/5cAOhdsQuzg
terminal force closing on lineage and xenondhd... any suggestions?
srijansaxena11 said:
terminal force closing on lineage and xenondhd... any suggestions?
Click to expand...
Click to collapse
Not getting FCS check video
srijansaxena11 said:
terminal force closing on lineage and xenondhd... any suggestions?
Click to expand...
Click to collapse
Try uninstalling terminal app and install this one
https://drive.google.com/file/d/0BzM1YuO3yLiQZEJJRXc5aTVGckk/view?usp=drivesdk
please help me, why my fingerprint not work. before flash it, everything was fine..i'm using nitrogen os
BUG
external wifi cards are not working (tp link tl wn722n) , hid are not fully working (duckhunter in particular) ,also got into root problem , if anybody want to try NH use unrooted nirtogen os .very happy with volt feature and many new feature are added
thanks in advance
tongo45 said:
please help me, why my fingerprint not work. before flash it, everything was fine..i'm using nitrogen os
Click to expand...
Click to collapse
Are you goodix fingerprint user
???
abhinavornikkoo said:
external wifi cards are not working (tp link tl wn722n) , hid are not fully working (duckhunter in particular) ,also got into root problem , if anybody want to try NH use unrooted nirtogen os .very happy with volt feature and many new feature are added
thanks in advance
Click to expand...
Click to collapse
First turn off your internal wifif card then restart then after reboot connect to external wifi to mobile then go to wifi settings just turn on wifi your external wifi card will be used
[email protected] said:
Are you goodix fingerprint user
???
First turn off your internal wifif card then restart then after reboot connect to external wifi to mobile then go to wifi settings just turn on wifi your external wifi card will be used
Click to expand...
Click to collapse
Yes,i think. How to see goodix or fpc fingerprint ?
[email protected] said:
I have tried it works but you will need to complete. It's first boot then open net Hunter. App all good then go to SuperSU click on full unroot then go to recovery forcefully then flash magisk then kernel which you want
Then reboot but I am getting. Cts profile mismatch
Here is video
https://youtu.be/5cAOhdsQuzg
Click to expand...
Click to collapse
Cts profile mismatch as you have not enabled magisk hide hi to settings ands enable magisk hide
[email protected] said:
Are you goodix fingerprint user
???
First turn off your internal wifif card then restart then after reboot connect to external wifi to mobile then go to wifi settings just turn on wifi your external wifi card will be used
Click to expand...
Click to collapse
Ohh ic,,so thats how to turn on external wifi..
Cz i was tried this NH b4 n cant detect my external wifi
Gotta try flash this again on my Nitrogen os..hope it work..
Will give report on this l8r..btw nice work
replay
[email protected] said:
Are you goodix fingerprint user
???
First turn off your internal wifif card then restart then after reboot connect to external wifi to mobile then go to wifi settings just turn on wifi your external wifi card will be used
Click to expand...
Click to collapse
still not working ! i have tried , every thing looks good except external wifi card problem, hope u can help us with patch,
will it work on ressurection remix ??
and if it will plz tell me about the bugs and installation procedure !
Thank you
Hey can some tell me how to install fluxion on NH,
I have tied by terminal as well as on vnc server , when I type ./Installer.sh then it gives bash ./installer.sh permission denied then I tied chmod +x .. Plz plz help me
Still not working for external wifi card,i'm using wn722n too
Can that file worked redmi note 4?
[email protected] said:
Are you goodix fingerprint user
???
First turn off your internal wifif card then restart then after reboot connect to external wifi to mobile then go to wifi settings just turn on wifi your external wifi card will be used
Click to expand...
Click to collapse
I was trying this n still doesnt work for me..im assuming this is kernel problem..no kernel support nethunter so no external wifi detected..
So far i only known there is one rom working for nethunter..thats cm 13 with builth in nethunter kernel..but wifite doesnt work..
I hope there some1 can make nethunter kernel fully working for ours device
So I installed kali Linux all on my external sd card so far using the compulsion kernel phone is running ultimate rom android 4.4.2. After installing kali Linux using Linux deploy and the compulsion kernel I install the Civz kernel rev 1.9 for android 4.4.2 model numbser smn9005. The civz kernel apparently has Atheros usb support in the kernel. When I start kali Linux and and insert my alfa Atheros AR9271 card it's recognizable by lsusb as inserted but ifconfig and iwconfig won't recognise it. Do I need a new Wifi adaptor and if so which one a link to the amazon UK site would be good or can I use monitor mode with my current card. I'm running the note 3 smn9005 ultimate rom 4.4.2 civz kernel, Linux deploy with kali-linux-all installed on an ext2 partition on my external sd card help with this would be much appreciated and could help others also. Thank You!!!
Edit: is there any chance im using the wrong wifi adaptor as the amazon listing says its using the atheros ar9271L chipset. If I order a tp link wl722n version 1 from abroad would that work?
Ive bought 3 new kali linux compatible wifi cards a couple of different chipset alfas and a tp link wn722n version 1. Will update here with what happens. Any help would be appreciated.
Monitor mode solved
paramount7force said:
So I installed kali Linux all on my external sd card so far using the compulsion kernel phone is running ultimate rom android 4.4.2. After installing kali Linux using Linux deploy and the compulsion kernel I install the Civz kernel rev 1.9 for android 4.4.2 model numbser smn9005. The civz kernel apparently has Atheros usb support in the kernel. When I start kali Linux and and insert my alfa Atheros AR9271 card it's recognizable by lsusb as inserted but ifconfig and iwconfig won't recognise it. Do I need a new Wifi adaptor and if so which one a link to the amazon UK site would be good or can I use monitor mode with my current card. I'm running the note 3 smn9005 ultimate rom 4.4.2 civz kernel, Linux deploy with kali-linux-all installed on an ext2 partition on my external sd card help with this would be much appreciated and could help others also. Thank You!!!
Edit: is there any chance im using the wrong wifi adaptor as the amazon listing says its using the atheros ar9271L chipset. If I order a tp link wl722n version 1 from abroad would that work?
Click to expand...
Click to collapse
SO i bought several kali linux recommended cards none worked accept the awus036h wireless card which uses the rtl 8187l chipset i believe made by alfa network. However it wasnt working with kali linux on linux deploy rather kali linux using the complete linux installer method. I repeat several cards except the awus036h made by alfa network were not working. Any questions feel free to ask.
First time posting, but I've read through dozens of threads and have used the site extensively. I cannot seem to find an answer to the issue I'm having. I had an old Galaxy Note 4 lying around and wanted to see if I could install NetHunter. After tons of trial and error, I was successful in flashing LineageOS 15.1, addonsu -15.1 arm, nethunter-generic-armhf-kalifs-full-rolling-2017.10-20171013-0449, and kernel-nethunter-generic-armhf-3.15.4-20170211-0304 (too new to post link of the NH builds). I have full chroot, updated busybox (v1.25-0-NetHunter) and SuperuserSU to manage root privileges. I had to install all of the tools (e.g., cspolit, DriveDroid, OpenVPN, etc.) individually, but they seem to be in working order.
My issue: I bought an external wifi adapter (Alfa AWUS036NEH) with a chipset (Ralink Technology Wifi Adapter RT2780) that supports monitor mode. The Wifi card appears to work flawlessly on my macbook with Kali distro, but I can't seem to find a way for the NH kernel on the Note 4 to recognize the adapter. In the kernel I flashed, I can see the rt2870.bin firmware required in the /system/etc/firmware folder, but for some reason Nethunter does not recognize the adapter. On most Nexus/NH builds, the wifi adapter is found to be compatible and is usually plug and play.
When I run:
-Kali terminal
-ifconfig
There is no wlan1. Only wlan0.
Same thing if I run iwconfig.
When I run:
-kali terminal
-airmon-ng
I receive a prompt that states:
Found phy0 with no interface assigned, would you like to assign one to it [y/n]?
-y
ERROR adding monitor mode interface: command failed: Operation not supported (-95)
No surprise, the above is indicating the embedded chipset does not support a monitor mode interface, but it doesn't even list the external adapter.
when I run: lsusb
Output shows the Ralink wifi adapter on bus 3:2.
I understand NetHunter was not built for LineageOS 15.1, but there has to be some way to maybe push the firmware or modify the firmware (I have the original firmware from the manufacture) to be compatible with my current build? Do I need to compile my own Kernel for this to work properly? Why doesn't the generic NH kernel, with the rt2870.bin file work?
Thanks ahead of time.
Have you tried using Magisk and flashing the Kali Nethunter module with that? It also includes multiple wireless firmware and I believe the correct one for your Alfa dongle. I too just bought that exact WIFI dongle and I'm still in the process of setting up Kali on my Note 4.
I had a similar issue as you on my OnePlus 5T even with the Magisk module for Nethunter. I'm going to try and find a different kernel because I think that's my issue on that phone.
My Note 4 is N910P but I'll let you know if I find something that works and maybe it'll help you find a way on your variant.
I downloaded and installed Kali Nethunter in Samsung Galaxy Note 4 SM-N910C (trelltex, my firmware is Lineage 17.1, I have a kernel (Linux kali 3.10.9+ #1 SMP PREEMPT Tue Jun 29 01:40:50 pdt 2021 armv7l), everything works just fine, but Kali Nethunter does not see my external Wifi adapter Alfa (AWUS036NHA) , chipset (AR9271).I almost tried everything, I could not find the answer, the atheros drivers are installed and the ath9k-htc. Hello, I downloaded and installed Kali Nethunter in Samsung Galaxy Note 4, my firmware is Lineage 17.1, I have a kernel (), everything works just fine, but Kali Nethunter does not see my external Wifi adapter (). I almost tried everything, I could not find the answer, the ateros drivers are installed and there is atn9k .ROOT have, put by the magisk. I connect via OTG, I changed everything the same. Please help me to fight this. Thanks.
I tried to plug my usb into my phone (sm-n910u with lineage 17) but nothing happened
I know that Note 4 have otg function