I've decided to give compiling on my own a try, and what I've come up with is available for download here: https://ufile.io/tojwq
I have not tested it myself, so I do not know if it even boots up properly. I am planning on testing it next weekend (too busy this weekend with final exams coming up). Given that I have no idea if this is going to work, I would discourage anyone from switching to this without first taking a backup of their existing image.
Please not another unofficial build!
The source is not ready for this. You'll have bluetooth problems.
Thread closed - this is not Development.
Related
Hello Everyone!!!!
As the title states I am trying to build my first ROM from source, I am wanting to build a PAC-Man variant for our phone (AT&T S4).
I am currently installing Xubuntu 13.04 x64 on a old Pentium D (2.4 ghz with 2GB of RAM) and I am reading over this post while it is installing.
I am also reading over this thread as well. I assume I can try to build a CM 10.1 build first, LOKI it, then get it working then add the stuff in for PAC-man after that, but I am not sure. I was wanting to know if any ROM developers can point me in the right direction for learning how to compile ROM's from source. I know the typical rule here is to search, search, and if lost SEARCH MORE but I feel that I am missing knowledge on what to search for in the first place.
I hope to spend the next few days on this little project and if all works well I will attempt to maintain a Dev thread with updates every few days to a week.
Thanks for any information you all can provide and I appreciate any guidance
http://forum.xda-developers.com/showthread.php?t=1798056 this forum gave me a lot on insight when I started building my own rom. Hope it helps, best of luck to you!
I figured out how to install the SDK, and start building things, Its currently building the release right now, lets hope it doesn't blow up
EDIT: Would anyone be willing to try it if I feel its good enough to test?
Neoistheone2000 said:
Would anyone be willing to try it if I feel its good enough to test?
Click to expand...
Click to collapse
I'll try it out! I was going to build it, but I don't have enough hard drive space with my BeanStalk repo set up
Builders thread only!!
Looking for pioneer compilers. I know I'm capable of bringing los 15.1 to kiwi but I lack the resources at this time to build.
For those who already have trees set up I can guide u through commits to make a successful compilation.
Use this thread for commits and compilation inquiries only!!
1. Check commits from los for same chipset on kernel and device config.
2. Trial build on your private tree before making commits to github.
3. Never post untested builds.
All the commits are out there. Our respective builders on los have so many other devices to build for.
I've pioneered lg and Samsung devices w help from @ShadySquirrel to unsuspecting platforms.
dave71670 said:
Builders thread only!!
Looking for pioneer compilers. I know I'm capable of bringing los 15.1 to kiwi.
For those who already have trees set up I can guide u through commits to make a successful compilation.
.
Click to expand...
Click to collapse
Not to spam but ,compilation is a thing but will it boot correctly ?
I have trees. See your PMs.
To add more detail...
We're already compiling and have plenty of logs. Everything bootloops at ROM logo. See github.com/kiwi-o
Great to see you guys trying, fantastic !
Keep up the great work guys. Maybe this will become one of those great legacy phones.
Are you still working on this guys? I haven't seen any commits for a while
TheRealIntence said:
Are you still working on this guys? I haven't seen any commits for a while
Click to expand...
Click to collapse
odds are yes, but its an old device and a crappy budget one so dont get your hopes up. i just got a 1+5t 128GB for $475 USD. i suggest you move on and find another device. the devs will probably succeed in porting Oreo but it will take along time since its not a very easy thing to do.
you should check in maybe every few weeks and if you really want oreo on this device, i suggest that you donate to the kind devs that develop for this device. btw, they do this for free so keep that in mind. cheers!
Do you need beta testers for lineage 15.1 ?
ljukigrobar said:
Do you need beta testers for lineage 15.1 ?
Click to expand...
Click to collapse
There's nothing to test, because it bootloops.
Hey all you Sharp 306sh users!
I love this phone and decided to start a ROM port to Oreo 8.0.0!
To date here's what i got
1. Device tree built
2. ASOP stock rom built successfully
Here's what I need to get done next
1. Access bootloader to flash images
2. Test for vendor blobs needed so I can make the vendor tree (if required)
Your help on this would be greatly appreciated as I am just getting my feet we in this process, this is a great phone and I would love to see it updated.
Please let me know if you are interested in helping with this project!
Edit 8/6/2018: Device tree is on Github,
https://github.com/RobertCC18/sharp-306sh-rom
More to come once kernel is built!
Edit 10/12/2018:
I am uploading the first test build so I can get some help with the debug. THIS ROM IS GETS STUCK AT THE SHARP BOOT LOGO AND IS NOT READY FOR PRODUCTION DEVICES!!!!
That being said, any help and logs that you can send are greatly appreciated.
This zip can be flashed through TWRP, check the downloads section
XDA:DevDB Information
Android 8 Rom [stock], ROM for the Sharp Aquos Crystal
Contributors
RobbotCC
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.10.x
Based On: AOSP
Version Information
Status: Testing
Created 2018-07-15
Last Updated 2018-10-12
Great! I´ve got a 306SH model, i can be a tester... waiting for your first zip :highfive:
Awesome.
I tried this exact same thing before, but gave up soon after I couldn't diagnose what stopped my device from booting with my custom ROMs, as I could never find the logs.
It looks like you're making more headway than me, so I'd love to test it, or even just help out.
Keep on going! A GitHub would be great progress.
Update 7-4-18
Update - 7/24/2018
Recompiling Kernel with debug drivers included - current compiled kernel missing RAM Console support
Github repo coming soon!
Great! Always wanted a custom room on this phone. I can test it and try it out too
Good progress.
Make sure to keep us updated, once you have a GitHub repo, development should speed up.
I'm sure there are a few techies with this phone that would love to contribute to your ROM, myself included.
By the way, you said ASOP instead of AOSP in the original post.
Rhioun said:
Make sure to keep us updated, once you have a GitHub repo, development should speed up.
I'm sure there are a few techies with this phone that would love to contribute to your ROM, myself included.
By the way, you said ASOP instead of AOSP in the original post.
Click to expand...
Click to collapse
Thanks, whoops on the typo!
Been busy with work but hoping to upload device tree, kernel base and current build, waiting for kernel to finish building with RAM console drivers.
Update 8/6/2018
Github Created
https://github.com/RobertCC18/sharp-306sh-rom
Device tree is added, kernel coming soon!
About accessing the bootloader to flash images, I believe we've done this before.
Tewilove, the man behind rooting the 306SH managed to access it, and made a custom one to flash, if I do remember correctly.
https://forum.xda-developers.com/aquos-crystal/general/temp-root-306sh-t3129456
Worth a look.
No development in a while. We all hope you're still there.
I visited the Github and just found it to be text files and folders. Could you possibly post the WIP kernel or other vendor blobs on there,
so we have at least a basis to begin work on?
Thanks,
This is an amazing idea. My 306SH is rooted and ready for action.
Rhioun said:
No development in a while. We all hope you're still there.
I visited the Github and just found it to be text files and folders. Could you possibly post the WIP kernel or other vendor blobs on there,
so we have at least a basis to begin work on?
Thanks,
Click to expand...
Click to collapse
Yes I am still here and working on this, just haven't had much time lately. I will try to get the kernel and vendor blobs up within the next few days
Been waiting for a custom ROM for this phone. I'm ready to test it
Any update on the development of the ROM??????
Any progress?
Status Update
dzvxo said:
Any progress?
Click to expand...
Click to collapse
Hey everyone,
Sorry for the delay in development but I hit a major snag with the kernel build and am still working on overcoming it. The needed defconfig is missing so I found one that should get us close, at the very least it should allow us to see the RAM debug messages on boot failure.
Also, my internet has been to slow to upload the kernel to github but I have an upgrade and should be able to get it uploaded within the next couple days.
Please share any information that you find regarding this phone here on XDA and beyond, any info you can provide will help me get this up and running faster!
Hey, how's everything going? Any luck?
What's up with it?
Hey All,
Sorry for the delayed responses, this phone seems to be a lost cause. But I am not a quitter lol!
I am hopeing to get back into the swing if things here in the next few weeks and will post more updates and files here shortly
Current problems:
No debugging enabled
Kernel needs patched to support Android 6+
We wish you the best of luck!
I would like some help with finishing with the device tree and also I’m having issues with building a kernel and the only thing I get is the dtbs files from there.
Here is the kernel
github.com/488315/android_kernel_mediatek_mt8163
Device tree
github.com/488315/android_device_amazon_karnak
I would like to help with people and collaborate in my discord channel and my discord channe link is discord.gg/ZYZuBMu
I don’t know if I’m allowed to post these stuff here but I hope it would help and I’m a college student and full time worker and it has been keeping time away from it and an help would be appreciated, when this is done you’re welcome to test it out and post issues on this page.
Sent from my iPhone using Tapatalk
The building has been in progress
It’s in progress... but bad news is that it fails to continue to build because it keeps giving out profman error and I can’t provide screenshots here but it’s in my discord channel and I think the tree wasn’t set up properly and I got a help from @Rortiz2 and I think that my tree isn’t properly setup. Well I think that I have to rebuild my device tree and it feels like I’m going to give up on this project because it’s not easy but I have school and work and it took me a lot of time to build this tree but I would never give up by motivation. I can let you guys modify my tree and I tried my best as I can. Tonight I will update my tree because there are some modifications to help build. It is synced and up to date. I tried make clean and clobber and also I followed the guide too. It sucks that it has been failing. If you guys would like to help me and get it done by end of this month, ill release it publicly. I would appreciate all your help!
..
Reserved.....
Hello... 'been using this phone for over a year now here is a clean build.prop from 6055B variant!
Also i'd like to help somehow, but I don't know how... I have zero Android dev experience (not really... last phone I ever modded was OT-918D *eons* ago, so it might as well be zero) but i'd be happy to test-drive anything as long as UI & RILd works.
I'll chime-in on Telegram too :good:
PizzaG said:
This will be the release thread for LineageOS 14.1
***LineageOS 14.1 Test Build for the 6055K is now live on Telegram with Download Link. Bluetooth and Camera aren't working yet***
If you want it to install on other variants, you will need to modify the installer script inside the zip. I'm not going to take the time to modify every Test Build to support every model. I'm running it on 6055U. If you do want to run it on another variant of 6055 and it's not installing, contact me on Telegram and I'll run you through how to modify the installer script to install on your device.
If you have anything to offer or just want to chat, you can find us here: https://t.me/Idol4Homies
Please don't report bugs here, we'd much rather you report any issues on our Telegram Group where the Dev will be able to see. I''m helping where I can and modifying little things but LimitedPython is doing the bulk of the Developing for this phone, please show your support and stop by the group to chat and say thanks.
5-13-2019- LOS 14.1 is currently booting to ADB but not posting yet. Sorting out some GPU issues and hopefully it'll be fully booting sometime this week.
5-14-2019- LOS 14.1 booting to OS. LTE Data and phone service works. Audio and most everything else is still broken currently but being worked on. If anybody has a clue what they are doing or how to help move this along to a public release, please join us on Telegram. I have a test image for people who can lend a hand but I'm not releasing anything publicly yet.
5-17-2019- LOS 14.1 working great so far. The only things not working at this point are Camera and BlueTooth, which hopefully will both be working very soon. I'll release a test build in the next day or so, so others can test. I'll be releasing TWRP and LOS 14.1 for the 6055U and 6055K variants. If you have another model you want supported from the 6055 line, PM me.
5-19-2019- This will work on every 6055 Model guys. That means 6055K, 6055B, 6055U, 6055R and 6055P will all work with this and future roms. No need to worry about "Bricking", as I have released Alcatel Stock Flashing software which will bring most, if not all the Alcatel Qualcomm devices back from the dead.
5-20-2019- Bluetooth fixed and working
Click to expand...
Click to collapse
I tried to go to your Telegram link for the LOS 14.1 6055U download, but it won't work. Idk why... Could you post a link to it here or something? Thanks in advance!
**scratch that I found it on the donate page**
Hello everyone.
I possess an Alcatel Idol 4 6055K, I would be very much interested in installing Lineage OS on this smartphone but I can't find any other source on the web on how to do it except for this thread.
I understand it should be possible with a release you're posting on Telegram, but if I click on the link it seems I can't acceed to the group.
Do you have any advice on how to try this OS on this marvellous phone?
So, no chance to ever see Lineage released for Alcatel Idol 4?
museovivo said:
So, no chance to ever see Lineage released for Alcatel Idol 4?
Click to expand...
Click to collapse
Yes, 14.1 has been out for a while now and 15.1 works too, I was told that a few days ago by the Dev. Come vist us on Telegram: https://t.me/Android_General_Chat
The Dev is in there and should be able to provide you download links for Los 14.1 or 15.1
We also still need donations as the Dev has lost his Idol 4 and needs a new one to continue making Idol 4 Fully Treble