Hello everyone. I have bought my Leeco Le Pro 3 and it arrived yesterday. Before this phone I had a Oneplus One (great device).
I noted that touch latency on Leeco Le Pro 3 is higher than Oneplus One. Is there any solution to reduce it?
Thank you and sorry for my bad english.
Nobody has the same feeling?
There's no easy way to measure latency without using WALT. Besides, these are sub-$300 phones we're talking about. Flash a new ROM to see if the issue improves.
Touch latency
Chocorap said:
Nobody has the same feeling?
Click to expand...
Click to collapse
Yes, I did experience a similar issue before update to EUI 5.8.21s. After the update no issues whatsoever.
Do we have official 5.8.21s update from leeco? Is it OTA update ?
tsongming said:
Yes, I did experience a similar issue before update to EUI 5.8.21s. After the update no issues whatsoever.
Click to expand...
Click to collapse
I have Paranoid 7.3.0 and before flash it, I had EUI 5.9.023s, and the problem is still there
Chocorap said:
I have Paranoid 7.3.0 and before flash it, I had EUI 5.9.023s, and the problem is still there
Click to expand...
Click to collapse
Okay, I installed Paranoid today ( the one released on 10/30) and I do not have any issues all! Everything is working. The only issue I had was with unlocking my phone.
I flashed the 5.19s bootloader unlock file and once unlocked I fully wiped my phone, installed Paranoid, installed Gapps, , rooted with SuperSU, and it's working flawlessly.
Sent from my LEX727 using XDA Labs
Related
Hey all,
Feel free to use this thread to discuss the recent V10m-OCT-14 Software Update for the G3. I have just received it on my International D855 Model.
Listed enhancements are:
- Apps
This update is 180MB if coming from the other latest update, v10l. You can download this update by going to your Update Center, Software Update. Or, your G3 might have already downloaded it OTA.
Personally, I find a bit more battery life, and more responsiveness coming from v10l, feel free to share your individual experiences with this update here!
Battery life is better than 10L, but it's only one day used. Will see how is in the next few days
Just installed it and rooted it with PD...works fine at the moment, downloading music from spotify and such, let's see how it behaves in a few days time. V10L still had the noises while charging...expecting 10m to have the same issue.
Any KDZ File?
Thank's
Bump! works with this?
lossah said:
Bump! works with this?
Click to expand...
Click to collapse
PurpleDrake root and Bump! is working with this version too.
freaked9 said:
PurpleDrake root and Bump! is working with this version too.
Click to expand...
Click to collapse
Awesome. Wonder what "apps" mean. Not less lag guess?
pcwm said:
Any KDZ File?
Thank's
Click to expand...
Click to collapse
Mega:
https://mega.co.nz/#!QJRj2CiC!Itn_hfpNHLxmpVFhobybtkb4Wf87sZaQxyJ6ASQBpN8
A few hours of usage 10M seems on par with 10L, same performance noting special. Guess we will have to see, the newer kernel build date suggests that some tweaks and updates are present and we are always grateful for tweaks
freaked9 said:
PurpleDrake root and Bump! is working with this version too.
Click to expand...
Click to collapse
:good: Cool. I can't wait OTA.
@ Mr Bo
Thank's , flash in progress.
Does this update resolves the "Hissing and buzzing sound with headset/AUX" issue ?
Still don't see the M for my IMEI / Region (India) yet. Waiting !
Hissing noise is likely to be hardware so don't hold your breath for a software fix. They obviously didn't adequately shield headphone socket from the charging/battery.
Blimey, I only just got around to flashing v10L.
Is there a way to install the OTA update for someone who has TWRP recovery installed without getting stuck inn the recovery on reboot ? Fortunately, there is a fix to get out of the recovery but the OTA doesn't install when returning back to system.
oracleoftruth said:
Hissing noise is likely to be hardware so don't hold your breath for a software fix. They obviously didn't adequately shield headphone socket from the charging/battery.
Click to expand...
Click to collapse
I can cancel this issue with some tricks (USB or call trick). The G2 did have this issue with kk4.4.2 ant it was resolved with the 4.4.4. So i m still waiting an update or an aosp rom.
soupratt said:
Is there a way to install the OTA update for someone who has TWRP recovery installed without getting stuck inn the recovery on reboot ? Fortunately, there is a fix to get out of the recovery but the OTA doesn't install when returning back to system.
Click to expand...
Click to collapse
I'd like to know this as well.
biron_w said:
I'd like to know this as well.
Click to expand...
Click to collapse
Tried this?
That's how I install L. Worked fine, just lost root (which TWRP fixed), DPI was changed back to stock (I fixed that) and it reinstalled a little bloatware (McAfee) which Titanium took care of.
That is, of course, if you can get the KDZ.
I can't see any serious difference after weeks of using ".i" version... always flashing with CSE option.
phone works great, very smooth, battery life for around 5-6h of screen awake
Finally Motorola released the OTA update for Moto g 3rd gen with 3 different improvements .The size of OTA is 177.4 Mb.
1.Stagefright Fix
2.Add Night Mode to Camera
3.Bug fixes and Stability Improvements
Source:http://www.gammerson.com/2015/09/moto-g-3rd-gen-ota-update-fix-download.html
so this update will fix the overheating issue and battery drain issue?
gonzodesigns said:
so this update will fix the overheating issue and battery drain issue?
Click to expand...
Click to collapse
What issues are those? I've seen very few reports of those types of issues with the 3rd gen. Obviously, those things happens to a small portion of users on almost every Android phone.
screen on time is decent, but could be better. I'd love to find a permissive kernel I could tweak...anyone up for it??
Im still running the release version firmware. Had night mode since release so i wonder apart from stagefright what the UK release will bring?
Does anyone have this as a flashable zip yet?
Sent from my MotoG3 using xda premium
bozzykid said:
What issues are those? I've seen very few reports of those types of issues with the 3rd gen. Obviously, those things happens to a small portion of users on almost every Android phone.
Click to expand...
Click to collapse
my personal experience with an 8gb model was a hot skillet in just 3 minutes on wifi or lte network plus doing some search i found a lot of users reporting the same issue so its not a very small percent it is a known issue maybe some users dont report it or dont care about it but it really gets hot. maybe some batchs maybe the 8gb model who knows!
every phone have small issues some related to hardware some related to software thats why i asked if the upgrade fix this one
but a phone that turns in to a hot skillet its not safe to use.
Update notes
gonzodesigns said:
so this update will fix the overheating issue and battery drain issue?
Click to expand...
Click to collapse
Umm... What overheating and battery drain issues . My Moto G3 is definitely the coolest running phone is ever owned, and battery life is very good to excellent.
Sounds to me like you have other issues going on.
Sent from my MotoG3 using Tapatalk
Not showing up on my US retail version yet.
Himalaya saxena said:
Finally Motorola released the OTA update for Moto g 3rd gen with 3 different improvements .The size of OTA is 177.4 Mb.
1.Stagefright Fix
2.Add Night Mode to Camera
3.Bug fixes and Stability Improvements
Source:http://www.gammerson.com/2015/09/moto-g-3rd-gen-ota-update-fix-download.html
Click to expand...
Click to collapse
This OTA does not load itself if you have a custom recovery. To avail of this OTA the phone should have the STOCK recovery.
Unlocked bootloader does not matter, but being on STOCK recovery is must for the update to recognize the fingerprint and load the OTA.
After changing the custom recovery to STOCK recovery, phone is stuck at blank screen after the OTA update. Trying to figure out what to do.
Any suggestions?
arunhebbare said:
This OTA does not load itself if you have a custom recovery. To avail of this OTA the phone should have the STOCK recovery.
Unlocked bootloader does not matter, but being on STOCK recovery is must for the update to recognize the fingerprint and load the OTA.
After changing the custom recovery to STOCK recovery, phone is stuck at blank screen after the OTA update. Trying to figure out what to do.
Any suggestions?
Click to expand...
Click to collapse
anyone help i facing the same issue
asrupesh said:
anyone help i facing the same issue
Click to expand...
Click to collapse
I am surprised to notice that after the update the system has vanished and the booting process stops on a blank screen (with screen lit dimly).
No worry. Here is the solution. Flash STOCK firmware....
http://forum.xda-developers.com/2015-moto-g/general/index-moto-g-factory-firmware-images-t3169639
Here is the link for the procedure
http://www.gammerson.com/2015/08/how-to-flash-stock-firmware-of-Moto-g-3rd-gen.html
Can some one capture the OTA and make a custom rom flashable file?
Currently my phone is bricked. Will update later.
arunhebbare said:
I am surprised to notice that after the update the system has vanished and the booting process stops on a blank screen (with screen lit dimly).
No worry. Here is the solution. Flash STOCK firmware....
http://forum.xda-developers.com/2015-moto-g/general/index-moto-g-factory-firmware-images-t3169639
Here is the link for the procedure
http://www.gammerson.com/2015/08/how-to-flash-stock-firmware-of-Moto-g-3rd-gen.html
Can some one capture the OTA and make a custom rom flashable file?
Currently my phone is bricked. Will update later.
Click to expand...
Click to collapse
I found the solution just clean flash stock rom without root or any modifiction.
Then update, It works perfectly without any problem... I updated by following this method......
asrupesh said:
I found the solution just clean flash stock rom without root or any modifiction.
Then update, It works perfectly without any problem... I updated by following this method......
Click to expand...
Click to collapse
Can u give stock rom link
samarjatt said:
Can u give stock rom link
Click to expand...
Click to collapse
http://forum.xda-developers.com/2015-moto-g/general/index-moto-g-factory-firmware-images-t3169639
asrupesh said:
I found the solution just clean flash stock rom without root or any modifiction.
Then update, It works perfectly without any problem... I updated by following this method......
Click to expand...
Click to collapse
Hi, thank you.
Which stock rom did you use from the link? There are two there for the xt1550. I guess the one with the 23.72-47_cid7(Newer Build) is the one?
If you could elaborate what you did it would help others.
arunhebbare said:
Hi, thank you.
Which stock rom did you use from the link? There are two there for the xt1550. I guess the one with the 23.72-47_cid7(Newer Build) is the one?
If you could elaborate what you did it would help others.
Click to expand...
Click to collapse
No i used Older version 23.72-33... I didnt get update notification in newer 23.72-47 update...
aion11 said:
Not showing up on my US retail version yet.
Click to expand...
Click to collapse
US carriers seem to be much slower pushing out updates. Since they mostly use foreign support it makes little sense. I work for the same company as my carrier, but different division and word I have is they aren't pushing out the update for this phone because the phone isn't in their list of devices yet. BTW, I'd be curious if anyone actually knows someone that got the stagefright bug. You have as big a chance to get struck by lightning as you are in getting stagefright. Anything with Kit Kat or later makes it almost impossible for stagefright to replicate on their phone.
Tel864 said:
US carriers seem to be much slower pushing out updates.
Click to expand...
Click to collapse
The Moto G 3rd gen is sold in the US fully unlocked with no carrier branding. So the carriers don't push out the updates. Motorola generally pushes their updates to India first but the US usually comes soon after.
My wife's S3 got the update. About 400mb
They disabled the nagging permission from build in apps.
Sent from my LEX727 using Tapatalk
http://forum.le.com/us/index.php?threads/december-update-5-8-020s.4492/
Sent from my LEX727 using Tapatalk
Can someone upload update.zip in Google Drive, Mega or similar, please?.
Thanks in advance.
Mine is not gettin OTA update even if I press it via System Update.
And btw, this is for Pro 3 and not S3 right? =D
Joms_US said:
Mine is not gettin OTA update even if I press it via System Update.
And btw, this is for Pro 3 and not S3 right? =D
Click to expand...
Click to collapse
S3
Sent from my LEX727 using Tapatalk
coolmaster121 said:
S3
Sent from my LEX727 using Tapatalk
Click to expand...
Click to collapse
Then why post it here in Le Pro 3
Joms_US said:
Then why post it here in Le Pro 3
Click to expand...
Click to collapse
Perhaps they thought Pro owners received it as well. I've been checking and 19S is the latest for the US version.
Mine x720 still 18s, ori stock.
So for no one with a Pro3 from here or the lemall forums got this update
TheDethEgineer said:
So for no one with a Pro3 from here or the lemall forums got this update
Click to expand...
Click to collapse
Hoping that's due to them giving the Pro major changes, such as an improved camera, touchscreen fixes, louder call volume, and so on. It would be great to see the suggestions I submitted, but that's wishful thinking.
Ace42 said:
Hoping that's due to them giving the Pro major changes, such as an improved camera, touchscreen fixes, louder call volume, and so on. It would be great to see the suggestions I submitted, but that's wishful thinking.
Click to expand...
Click to collapse
I think they will work on the feedback, many people bought it during the black friday sale so maybe is to late for this update to include everything reported in the last month.
I submitted a few things and they answered very fast and willing to know more details. They are doing a good job there, lets hope it continues the same with the devs
Sent from my LeEco Le Pro3 using XDA Labs
TheDethEgineer said:
So for no one with a Pro3 from here or the lemall forums got this update
Click to expand...
Click to collapse
I just got my update downloaded for x727. I need to grab it and save it to Android File Host. I just reinstalled my stock ROM and that's when I got the update.
hondajohn88 said:
I just got my update downloaded for x727. I need to grab it and save it to Android File Host. I just reinstalled my stock ROM and that's when I got the update.
Click to expand...
Click to collapse
Really? With the system update app?
Sent from my LeEco Le Pro3 using XDA Labs
TheDethEgineer said:
Really? With the system update app?
Sent from my LeEco Le Pro3 using XDA Labs
Click to expand...
Click to collapse
Yep
Will we need to unroot and flash stock recovery for the update to work?
Sent from my LEX727 using Tapatalk
Ace42 said:
Hoping that's due to them giving the Pro major changes, such as an improved camera, touchscreen fixes, louder call volume, and so on. It would be great to see the suggestions I submitted, but that's wishful thinking.
Click to expand...
Click to collapse
Just updated my pro3 an hour ago.
hondajohn88 said:
I just got my update downloaded for x727. I need to grab it and save it to Android File Host. I just reinstalled my stock ROM and that's when I got the update.
Click to expand...
Click to collapse
Waiting for this. Thank you!
coolmaster121 said:
My wife's S3 got the update. About 400mb
They disabled the nagging permission from build in apps.
Sent from my LEX727 using Tapatalk
Click to expand...
Click to collapse
If you'd like to change the post title, you can add x727 OTA to the thread. Here's a link to the file.
https://www.androidfilehost.com/?fid=457095661767124419
hondajohn88 said:
If you'd like to change the post title, you can add x727 OTA to the thread. Here's a link to the file.
https://www.androidfilehost.com/?fid=457095661767124419
Click to expand...
Click to collapse
Flash stock boot.img before flashing this in TWRP. It will detect changes to the boot.img (Xposed, Magisk, systemless SU, etc)
Update: Flashed successful but phone won't boot....
Tikerz said:
Flash stock boot.img before flashing this in TWRP. It will detect changes to the boot.img (Xposed, Magisk, systemless SU, etc)
Update: Flashed successful but phone won't boot....
Click to expand...
Click to collapse
You flashed the OTA after flashing stock boot.img? What other mods or things (for lack of better words?) we're on your phone? I'm going to give it a shot here in a bit.
I'm currently rooted & unlocked bootloader.
I recently bought a OnePlus 5 with h2Os . I flashed it to oxygen OS using stock recovery. The problem is that the phone keeps on rebooting randomly from time to time.
I have tried several fresh flashes. Wipes. Factory reset but to no use. I wonder if there is any catch when flashing from H2Os to O2 OS . Or is my device faulty ?
I didn't check thoroughly if the behavior was the same on H2Os.
Any leads , help , guidance ?
Do you had this problem with the preinstalled h2Os?
I did not check. I flashed O2 as soon as I got home. So I can't say if it misbehaved on hydrogen os.
Have you downloaded the OxygenOS firmware from oneplus net?
Yes. From official website
salimbaba said:
Yes. From official website
Click to expand...
Click to collapse
Try to download even the official recovery and flash with that even if it seems equal... Otherwise i think you've to reflash h2os and test the phone and if the problem occurs again maybe the device is defective but without tests we have no answers :fingers-crossed:
Hitman478™ said:
Try to download even the official recovery and flash with that even if it seems equal... Otherwise i think you've to reflash h2os and test the phone and if the problem occurs again maybe the device is defective but without tests we have no answers :fingers-crossed:
Click to expand...
Click to collapse
Has there been reports of such faults on op5 ? I will probably be returning it tomorrow. But now I am afraid if the next op5 I get would be trouble free or not.
salimbaba said:
Has there been reports of such faults on op5 ? I will probably be returning it tomorrow. But now I am afraid if the next op5 I get would be trouble free or not.
Click to expand...
Click to collapse
I've never heard about this issue before but i'm only one, maybe try at the support forum on oneplus net
I think it has to do with unlocking bootloader and root. I erased everything, went back to stock rom and relocked bootloader and no reboot today.
Hello! I bought a Xiaomi Mi A1 last month. I didn't update it to 8.0 because of the problems faced by users. Then, I heard the official 8.1 update just got released. My question is, is it worth it to update it now?
joeljaq said:
Hello! I bought a Xiaomi Mi A1 last month. I didn't update it to 8.0 because of the problems faced by users. Then, I heard the official 8.1 update just got released. My question is, is it worth it to update it now?
Click to expand...
Click to collapse
Yes, but first backup your SMS!!!!
yanleites said:
Yes, but first backup your SMS!!!!
Click to expand...
Click to collapse
Alright. How's the camera and baterry life?
joeljaq said:
Alright. How's the camera and baterry life?
Click to expand...
Click to collapse
Camera is fine, about battery you can know only after few days...
8.1 is better for sure than 8.0, backup you SMS first because some users got their sms deleted. Camera is same as it was in every firmware. Battery is also same, no drain problem. So yeah, you can upgrade to 8.1
You are not going to face any changes from 8.0 to 8.1, same androids but just minor changes in UI and some new features, thats it