Related
Hi, I have flashed my phone into the Nighty CM7, I finished setting up and restoring my apps, then I wanted to boot into ClockWork Recovery so that I can backup my rom.
However I ended up with a dead reboot, its stuck at the M Logo. I waited till my battery died. I charged the phone for a night, and I ended up with the big battery sign with a QUESTION mark in it, the light beside the USB Port wont let up.
I connect it to my computer using the USB Cable, the Light beside the port lit up, but it wont charge nor boot, I tried to put my phone into RSD Mode so that I can flash my stock rom again, however it says "Battery Low Cannot Programm" and turns back off. I cannot put it into Recovery Mode by holding x and the power button.
CAN SOMEONE HELP ME? I CANT USE MY PHONE?
BlueEditionE6 said:
I waited till my battery died.
Click to expand...
Click to collapse
Ok, to be honest, this was stupid. Your first step is now get battery charged.
You have following options:
charge it in alive Milestone 2
charge it in some universal battery charger
charge it via wires (yes, it sounds risky and definitely it is not too good for battery life, but someone here successfully done it) - manual attach wires with coresponding voltage and give it few minutes - only to hold charge few minutes for RSDLite... Or you can maybe bypass battery and put wires directly on phone - but this is really risky and I dont recommend it.
Of course - best option is #1 or #2... But you can't do anything without charged battery...
Anonymous_ said:
Ok, to be honest, this was stupid. Your first step is now get battery charged.
You have following options:
charge it in alive Milestone 2
charge it in some universal battery charger
charge it via wires (yes, it sounds risky and definitely it is not too good for battery life, but someone here successfully done it) - manual attach wires with coresponding voltage and give it few minutes - only to hold charge few minutes for RSDLite... Or you can maybe bypass battery and put wires directly on phone - but this is really risky and I dont recommend it.
Of course - best option is #1 or #2... But you can't do anything without charged battery...
Click to expand...
Click to collapse
it doesnt work when the battry is charged charged, thats why i waited till the battery to die untill i start over again. I have looked online and dont think this is really a battery problem~
Look at here http://forum.xda-developers.com/showthread.php?p=19197228 - I think it's the same situation. You have to charge the battery to use RSDLite.
tl;dr Low battery = "Battery Low Cannot Program", charged battery = "Battery OK / OK to program" in RSDLite.. so...
sorry, how am i suppose to charge it? it wont charge, so i need a battery charger instead of charging it through the phone?
Yep, you can't charge your battery (in your phone) when you have bricked phone (thats why I said it wasn't good to let it die, because now you have one more problem - how to charge this battery)
And I wrote how to charge it in my post #1 - basically you have two options: universal battery charger (charger, where you put battery and it will charge it) or another (working/alive) Milestone 2...
great i got another ms2's battery to boot into recovery mode (rsd mode works too) thanks, i am a noob
No problem man, everyone makes mistakes time to time
It's good to see it solved and alive
well its still sbf-ing, one thing i notice is that its taking longer than usual, but i think it will work, thanks again
Your lucky then! I don't know anyone with an ms2 so had to go macgiver style and charge the battery directly with wires. I swear the battery has never been the same since, although every battery/system tool claims the battery health to be "good"
Sent from my A953 using xda premium
Maybe you should download battery calibration app?
Sent from my MZ601 using XDA Premium App
If you're refering to me - I've done that already and no luck
I've tried every trick on battery calibration I've found on this site and google searches and it never shows any noticable improvement.
So now I'm just more vigilant with battery saving tricks
Thanks for trying to help either way
Sent from my A953 using xda premium
I'm working on my defy, but I have no flashed system into it, only twrp.
How can I charge it so I can flash a new system?
I can enter like 3 things, bootloader, stock recovery and twrp.
When I power it off it wont show charging battery, but maybe it does?
There is also a white led light on while a usb cable is connected. What does that mean?
Maybe when I get to the option between 'recovery' and 'continue', I should press comtinue and it will be charge-able there?
Thanks a lot, Im trying a long time to install cm11 into my defy, will get to it, I hope.
PenguinIsrael said:
I'm working on my defy, but I have no flashed system into it, only twrp.
How can I charge it so I can flash a new system?
I can enter like 3 things, bootloader, stock recovery and twrp.
When I power it off it wont show charging battery, but maybe it does?
There is also a white led light on while a usb cable is connected. What does that mean?
Maybe when I get to the option between 'recovery' and 'continue', I should press comtinue and it will be charge-able there?
Thanks a lot, Im trying a long time to install cm11 into my defy, will get to it, I hope.
Click to expand...
Click to collapse
You can try the "MacGyver".
USB cabel with open ends to put in to the Batterie contacts.
Or...5Volt source with fix current of 50-100mAmps. Some houres Charge. Controlled by VoltMeter.
Max. 4.1Volt ... no warrenty....on your own risc! !!!!
Just google it ...
Sent from my MB525 BL9.10 CM7.2 using XDA Free mobile app
Palawan-Taucher said:
You can try the "MacGyver".
USB cabel with open ends to put in to the Batterie contacts.
Or...5Volt source with fix current of 50-100mAmps. Some houres Charge. Controlled by VoltMeter.
Max. 4.1Volt ... no warrenty....on your own risc! !!!!
Just google it ...
Sent from my MB525 BL9.10 CM7.2 using XDA Free mobile app
Click to expand...
Click to collapse
Did that, took a usb cable and connected it to an adapter with 5.0DCV output.
CUrrently seems that my battery is invisible to the defy. I can't turn it on with it, only if im connecting it to the charger or "MacGyver". When I try to charge it, the battery shows 5%, after a second it's 20%, and after a cuople of more seconds it's 60%, and it wont reach 61%.
Sometime charging shows a question mark (?) on the charging meter (while powering on).
What should I do? charging it with another cable? Flasing again with sbf_flash? Let it charge more?
Also the bootloader wont start. The farest I made was a blinking screen which after that the defy rebboot again and again if im keep trying to get to the bootloader (Power+volume up pressed).
Can't reach recovery, the battery charging jump insead.
I need some help here.
PenguinIsrael said:
Did that, took a usb cable and connected it to an adapter with 5.0DCV output.
CUrrently seems that my battery is invisible to the defy. I can't turn it on with it, only if im connecting it to the charger or "MacGyver". When I try to charge it, the battery shows 5%, after a second it's 20%, and after a cuople of more seconds it's 60%, and it wont reach 61%.
Sometime charging shows a question mark (?) on the charging meter (while powering on).
What should I do? charging it with another cable? Flasing again with sbf_flash? Let it charge more?
Also the bootloader wont start. The farest I made was a blinking screen which after that the defy rebboot again and again if im keep trying to get to the bootloader (Power+volume up pressed).
Can't reach recovery, the battery charging jump insead.
I need some help here.
Click to expand...
Click to collapse
Looks like your batterie is dad/empty.
Let it SLOWLY charge to 4V by 100mA. Check the Volts! No overcharge!
If you have, try a adjustable Power supply with 4Volt like a full charged Batterie , cant overcharge and connect to Defy.
I did MacGyver and Batterie together in the Defy !!! DANGERUS! !!! Very filigran ... shortcuts ...
so Defy have Power to Boot in to bootloader or recovery. Supported bye the accu by higher consumtion.
How good is your Batterie? ??
How about 5euro for a New one.
Sent from my MB525 BL9.10 CM7.2 using XDA Free mobile app
---------- Post added at 06:27 PM ---------- Previous post was at 06:09 PM ----------
Palawan-Taucher said:
Looks like your batterie is dad/empty.
Let it SLOWLY charge to 4V by 100mA. Check the Volts! No overcharge!
If you have, try a adjustable Power supply with 4Volt like a full charged Batterie , cant overcharge and connect to Defy.
I did MacGyver and Batterie together in the Defy !!! DANGERUS! !!! Very filigran ... shortcuts ...
so Defy have Power to Boot in to bootloader or recovery. Supported bye the accu by higher consumtion.
How good is your Batterie? ??
How about 5euro for a New one.
Sent from my MB525 BL9.10 CM7.2 using XDA Free mobile app
Click to expand...
Click to collapse
You can also try to charge the Batterie in the OFFed defy over 1-2 days.
Without Android charge control it is very slow charge
Sent from my MB525 BL9.10 CM7.2 using XDA Free mobile app
Palawan-Taucher said:
Looks like your batterie is dad/empty.
Let it SLOWLY charge to 4V by 100mA. Check the Volts! No overcharge!
I used TCH-520 (AC charger model) with "Output DC5.0V --2A", So I need DC4.0 --100mA ? And I must stop it before 100% ?
If you have, try a adjustable Power supply with 4Volt like a full charged Batterie , cant overcharge and connect to Defy.
You mean those with the clock that I can choose my Volts? But I only those one which are used for organ. How can I connect it to a phone? And do you mean that with an adjustable power supply I can't make things worse?
I did MacGyver and Batterie together in the Defy !!! DANGERUS! !!! Very filigran ... shortcuts ...
Yea, Done that too, Big mistake.
so Defy have Power to Boot in to bootloader or recovery. Supported bye the accu by higher consumtion.
I dont really understand, can you explain again?
How good is your Batterie? ??
How can I check? I know it's a ''HF5X. Also I see it's a 3.8V. Should I find a charger with 3.8V too?
How about 5euro for a New one. Option
---------- Post added at 06:27 PM ---------- Previous post was at 06:09 PM ----------
[/COLOR]
You can also try to charge the Batterie in the OFFed defy over 1-2 days.
What is OFFed mode? If I connect my defy while powered off, It will turn on and show me battery charging (While not really charging ofcorse)
Without Android charge control it is very slow charge Yes, Annoying. Better manual charging.
Click to expand...
Click to collapse
Answered inside quotes. Thank you for helping!
You better look for new batterie.
When you charge and it is to quickly getting more and more %, than it looks like a defekt batterie.
When you try to go in to bootloader, it takes more energie then the batterie can deliver.
Dont forget, USB is not direct connected to the CPU, there is between the batterie and when the CPU starts to run, the Defy takes to much energie for a weak batterie .... the Volt level go down below 3.5V ...reboot ...
A empty batterie have 3.6/3.7 Volt.
Full charged 4.1/4.2Volt..
You can replace for Tests the batterie with a 4Volt source, like a powerstation with setable output.
When you sleep, you leave Defy charging but off. When Defy boots to charge, just off by push and hold Power until its off.
But better you look for fresh batterie.
MacGyver + batterie + defy = 5Volt will be redused to 4Volt by the batterie to get Power to Start the Defy. Very tricky ... be carefull
AND NO Blame to me
Sent from my MB525 BL9.10 CM7.2 using XDA Free mobile app
Thanks, got it better now.
Can you just explain this part better?
Palawan-Taucher said:
MacGyver + batterie + defy = 5Volt will be redused to 4Volt by the batterie to get Power to Start the Defy. Very tricky ... be carefull
AND NO Blame to me
Sent from my MB525 BL9.10 CM7.2 using XDA Free mobile app
Click to expand...
Click to collapse
If the battery reduce it to 4V by itself, shouldnt it be safe?
PenguinIsrael said:
Thanks, got it better now.
Can you just explain this part better?
If the battery reduce it to 4V by itself, shouldnt it be safe?
Click to expand...
Click to collapse
SAVE ??? , when you connect the batterie with the 5Volt-USB cable,
then batterie Volts increase from 3,6Volt up to 4Volt,
when charging is not stopped with 4Volt, its getting overcharged.
Should charge very slow, with a 1/10 from the capacity of the batterie.
So , with a 1500mAh batterie you should load with 150mA for 10 houres,
so its more save, becorse slow, but have to be controlled too, maximum 4,1 Volt.
This is controlled by Android regulary.
You can put the USB-cable in the batterie connector-slots and both together in the Defy.
So the batterie stay connected to the 5Volts and
will be charged from USB, even in the defy, bypassing the charge-controller.
So you can try to boot.
For a short time you can do so.
Later the batterie get higher and higher without charge-control, so will overcharge, DANGER !!!
Hi fellas...
when I shutdown my phone, Battery icon just a few seconds come in and göne.
when I turn on my phone, I can see charging but keeps the battery runs out.
----only charging while in recovery mode---
Are you using the original charger?
muratozdemir said:
Hi fellas...
when I shutdown my phone, Battery icon just a few seconds come in and göne.
when I turn on my phone, I can see charging but keeps the battery runs out.
----only charging while in recovery mode---
Click to expand...
Click to collapse
Hi mate ,
What rom are you using , what kernel and what bootloader do you have?
There are some incompatibilities between the old bootloader and the new kernels like with the old bootloader if you try to charge your phone while is off the phone will switch back on by itself but it will charge
What happens if you try to charge when the phone is booted?
Lennyz1988 said:
Are you using the original charger?
Click to expand...
Click to collapse
Yes.I think not about with charger
I flashed cm11 rom and maked wipe battery stats
I used my phone untill %0 battery.
charged completely (with the phone off)
turn on my phone and I deleted batterystats.bin
and again I shutdown my phone
disconnect from the charger
and turnon again
second time I drain my battery completed untill the phone shuts down
and this happened
muratozdemir said:
Yes.I think not about with charger
I flashed cm11 rom and maked wipe battery stats
I used my phone untill %0 battery.
charged completely (with the phone off)
turn on my phone and I deleted batterystats.bin
and again I shutdown my phone
disconnect from the charger
and turnon again
second time I drain my battery completed untill the phone shuts down
and this happened
Click to expand...
Click to collapse
Draining your phone to 0%, wiping battery stats and deleting batterystats.bin are completely useless things to do. It does nothing. In fact draining your battery untill 0% might actually damage your battery.
Your battery will calibrate itself, nothing you need to do.
Try what it does with the original charger.
I solved the problem
I flashed again same rom without last updated expect
problem=last updated package
hello everybody, im nicolas from belgium (sorry for bad English)
I've tried recently to install new arymod port from s7
but my phone never want to go after the logo screen.
I tried something like flash the kernel of darklord ... nothing.
So i'm back with my arymod
All thing it's all right except one :
My phone take a very very long time to charge (after a night only 30%) AND the battery discharge quickly (10% 30min)
So i think my battery is dead ... if i buy a new the problem will be resolved or not ?
It's possible the problem comme from firmware, or anything else which can discharge quickly my phone?
Thank everybody !!
small edition:
My phone vibrated intermittently and battery charging icon remains permanently even when I remove the cable
Do a factory reset first and see if that fixes it.
How old is your phone?
It's 2 year old, how can i do that correctly?
kernel, modem, firmware, all
chtit_nico said:
It's 2 year old, how can i do that correctly?
kernel, modem, firmware, all
Click to expand...
Click to collapse
Go to settings/backup and reset/factory data reset
i install stock firmware by odin, it's will good, but for one day.. after that, no way to charge ...
So i think battery is dead...
While my phone working, i see it's don't want to usb mass storage... and i can't detect my phone with odin...
You know why??
Thank
No drivers bad USB connection are the standard answers .
>>>So i think my battery is dead ... if i buy a new the problem will be resolved or not ? >>
Yes or no not going to know until you try another battery .
Anker brand from Amazon are good .
chtit_nico said:
i install stock firmware by odin, it's will good, but for one day.. after that, no way to charge ...
So i think battery is dead...
While my phone working, i see it's don't want to usb mass storage... and i can't detect my phone with odin...
You know why??
Thank
Click to expand...
Click to collapse
Are you using the same cable to charge and connect to pc with?
If so try another cable. Try also another USB port.
If nothing works then as suggested above, try another battery.
If that doesn't work either then it's probably the USB port in your phone that's bad.
Hi. Do a wipe /system /data /cache (i mean factory reset) for me it's always work Sorry i didn't read all... if battery won't charge its problem with USB in phone
JJEgan said:
No drivers bad USB connection are the standard answers .
>>>So i think my battery is dead ... if i buy a new the problem will be resolved or not ? >>
Yes or no not going to know until you try another battery .
Anker brand from Amazon are good .
Click to expand...
Click to collapse
thank you but the days before it worked properly, he loaded etc then a day later, nothing. so I assume that the problem of driver or usb is impossible, since it is the same component that I used
I buy this one https://www.amazon.fr/dp/B00AR0NC8K/ref=pe_386181_138588631_TE_dp_1
branko.savic said:
Are you using the same cable to charge and connect to pc with?
If so try another cable. Try also another USB port.
If nothing works then as suggested above, try another battery.
If that doesn't work either then it's probably the USB port in your phone that's bad.
Click to expand...
Click to collapse
Yes that's it... now im waiting my new battery (Thursday) i will do a feedback
nervous1301 said:
Hi. Do a wipe /system /data /cache (i mean factory reset) for me it's always work Sorry i didn't read all... if battery won't charge its problem with USB in phone
Click to expand...
Click to collapse
Ok thank, i will try it when i can charge my phone
Thank for all
Try to charge from "powerbank" from Samsung... If battery charge the USB will be ****ed up...
Hello,
I come with bad news
despite the new battery, the problem persists, I think usb is then screwed or is it possible that this is a soft brick?
My phone is not recognized by the PC, not even "unknown ringroad"
So, and because it's been a while that I want, I'm going to change phone and I hesitated between grade 4 and s6.
Which do you recommend?
In my note 3, I would like to repair the same when my girlfriend.
chtit_nico said:
Hello,
I come with bad news
despite the new battery, the problem persists, I think usb is then screwed or is it possible that this is a soft brick?
My phone is not recognized by the PC, not even "unknown ringroad"
So, and because it's been a while that I want, I'm going to change phone and I hesitated between grade 4 and s6.
Which do you recommend?
In my note 3, I would like to repair the same when my girlfriend.
Click to expand...
Click to collapse
No need to throw in the towel yet, you can order a new USB port for your note 3 on eBay for cheaper than the battery even, just search for "note 3 USB port" or check out this link:
http://m.ebay.com/itm/Charger-Charg...-Galaxy-Note-3-N9005-/390800694709?nav=SEARCH
You can change it really easy, it doesn't take more than 10 minutes, if you are unsure how to do it you can search for repair guides on YouTube or just click on this link:
https://m.youtube.com/watch?v=crKnoYdJCms
Good luck, and let us know how it goes.
branko.savic said:
No need to throw in the towel yet, you can order a new USB port for your note 3 on eBay for cheaper than the battery even, just search for "note 3 USB port" or check out this link:
http://m.ebay.com/itm/Charger-Charg...-Galaxy-Note-3-N9005-/390800694709?nav=SEARCH
You can change it really easy, it doesn't take more than 10 minutes, if you are unsure how to do it you can search for repair guides on YouTube or just click on this link:
https://m.youtube.com/watch?v=crKnoYdJCms
Good luck, and let us know how it goes.
Click to expand...
Click to collapse
Ok thank, i will try it, but for the quick discharge ?
chtit_nico said:
Ok thank, i will try it, but for the quick discharge ?
Click to expand...
Click to collapse
If problem with port it can be discharging quickly as well, and it could also be the battery as it's 2+ years old, so keep your new battery.
branko.savic said:
If problem with port it can be discharging quickly as well, and it could also be the battery as it's 2+ years old, so keep your new battery.
Click to expand...
Click to collapse
So it's better if i dont use new batterie before change usb?
I would suggest you change the USB port first, but if you can turn the phone on you can use it throughout the day and see if it still discharges as fast as before.
---------- Post added at 11:17 AM ---------- Previous post was at 11:14 AM ----------
I had to charge my phone 3 times a day and I thought something was wrong, but as soon as I got new battery it was perfect.
branko.savic said:
I would suggest you change the USB port first, but if you can turn the phone on you can use it throughout the day and see if it still discharges as fast as before.
---------- Post added at 11:17 AM ---------- Previous post was at 11:14 AM ----------
I had to charge my phone 3 times a day and I thought something was wrong, but as soon as I got new battery it was perfect.
Click to expand...
Click to collapse
it's amazing, with charger like that
http://www.conrad.com/medias/global/ce/5000_5999/5100/5140/5146/514691_BB_00_FB.EPS_1000.jpg
i mean without removable cable my phone charge completly about in 3hours do you understand why?
i use my phone since 30minutes and im now at 93%
location and bluethoot actived
also wifi et data mobile
it's usual for you or not? because before i've never check
chtit_nico said:
it's amazing, with charger like that
http://www.conrad.com/medias/global/ce/5000_5999/5100/5140/5146/514691_BB_00_FB.EPS_1000.jpg
i mean without removable cable my phone charge completly about in 3hours do you understand why?
i use my phone since 30minutes and im now at 93%
location and bluethoot actived
also wifi et data mobile
it's usual for you or not? because before i've never check
Click to expand...
Click to collapse
That charger is not original, what's the output rate on it?
As for battery life it all depends on what you do with the phone, it's not unusual if you play games or use something processor intensive.
Also the screen is drawing power, so set it to minimal brightness that you feel comfortable with.
Is your phone getting hot?
branko.savic said:
That charger is not original, what's the output rate on it?
As for battery life it all depends on what you do with the phone, it's not unusual if you play games or use something processor intensive.
Also the screen is drawing power, so set it to minimal brightness that you feel comfortable with.
Is your phone getting hot?
Click to expand...
Click to collapse
Not hot, like i said in my last post
location and bluethoot actived
also wifi et data mobile
my charger is a Samsung
output 4.75v 0.55A
on charging battery discharge ?
actually my phone's battery is old and now its not charging anymore. my phone only works while charging and battery always stay at 50% and in 2sec it goes to 80% and when i got a call it turns off. and phone market is 25km away from my home and I can't goto the market for 2 days. so currently i unplug the battery connector and plug the charging in and using the phone is it safe to using phone this way because i don't want to damage any components of the phone.
ranjodhricky said:
actually my phone's battery is old and now its not charging anymore. my phone only works while charging and battery always stay at 50% and in 2sec it goes to 80% and when i got a call it turns off. and phone market is 25km away from my home and I can't goto the market for 2 days. so currently i unplug the battery connector and plug the charging in and using the phone is it safe to using phone this way because i don't want to damage any components of the phone.
Click to expand...
Click to collapse
Im not sure if my battery is old or not coz i bought it this year but facing the same problem after flashing Twrp through PC and installing custom rom. Even with fast charger its saying charging slowly and right now im using it with 0% so its fine to use it while charging i guess. It might have something to do with the rom? I don't know... I'm gonna download other rom and see if it can be fix. There is a problem with mounting '/Vendor' too.. Lol!
you can check the battery health with this app
https://play.google.com/store/apps/details?id=com.ezlapp.battery.testing
maybe its battery problem not with rom.
i checked the battery health and it shows Very Bad.
and my phone turns off even while charging so i removed the battery and plug in charger and turn it on now its working fine.