Database Users

Market working on the vega 1.8 firmware

No need to install modaco R6 as it is not fully compatible with the latest vega firmware 1.8. Just follow these simple instructions and it will be working without any add-ons at all. CWM people will probably have to do it via the recovery.
Just download the attachment with the vega, go to settings, software tool, software update and point it to where you got the downloaded file. The vega will reboot and you will have a full working market. It will be the old version the first time you launch it but it will update itself. After that just install maps, youtube and everything else google. The only thing I'm having trouble installing is the official twitter app.
Hope that helps you guys at XDADEV
http://fileape.com/?act=download&id=bbxlSLJddQ5DnT4y&g=1

Thanks for this.
I have edited it and added the smalltaskbar, works great. Cheers

hi guys, i'm having issues trying to install market. i have tried this file and the one from o_g. with no luck. i can dl find and execute the file. when i comes to reboot i get the android out of the box symbol (which i'm assuming is bad ?)and have to power down the vega to get it to boot again, without market ? any ideas ? i have little knowledge of android (phone related only) and am a bit stumped.
bl1nky

bl1nky said:
hi guys, i'm having issues trying to install market. i have tried this file and the one from o_g. with no luck. i can dl find and execute the file. when i comes to reboot i get the android out of the box symbol (which i'm assuming is bad ?)and have to power down the vega to get it to boot again, without market ? any ideas ? i have little knowledge of android (phone related only) and am a bit stumped.
bl1nky
Click to expand...
Click to collapse
Have you got the cwm?

original_ganjaman said:
Thanks for this.
I have edited it and added the smalltaskbar, works great. Cheers
Click to expand...
Click to collapse
You're welcome. There are some apps I have difficulty in finding in the market. I think it's due to the market trying to aquire location. I cannot install the official twitter app either. Trying to find solutions.

demonknight9 said:
Have you got the cwm?
Click to expand...
Click to collapse
thanks for response. no i don't have cwm, do i need it ?

bl1nky said:
thanks for response. no i don't have cwm, do i need it ?
Click to expand...
Click to collapse
No, you don't necessarily need it but it doesn't hurt if you do. It has to be done via recovery if you do though, different process. What firmware have you got?

bl1nky said:
hi guys, i'm having issues trying to install market. i have tried this file and the one from o_g. with no luck. i can dl find and execute the file. when i comes to reboot i get the android out of the box symbol (which i'm assuming is bad ?)and have to power down the vega to get it to boot again, without market ? any ideas ? i have little knowledge of android (phone related only) and am a bit stumped.
bl1nky
Click to expand...
Click to collapse
The android out of the box symbol is fine thats when it is flashing the files. there should be a progress bar that turns orange, after that happens the device should reboot its self. The only requirement is you are running stock v1.08.

demonknight9 said:
You're welcome. There are some apps I have difficulty in finding in the market. I think it's due to the market trying to aquire location. I cannot install the official twitter app either. Trying to find solutions.
Click to expand...
Click to collapse
I have noticed launcher pro does not show in the market had to install manually. i have tried changing the market files, but that does not work, so it might be as you say down to location, or i think it could be to do with are device name on the market, maybe advent does not want us to have those apps. I cant remember where the device name is. I will have to look further.

original_ganjaman said:
The android out of the box symbol is fine thats when it is flashing the files. there should be a progress bar that turns orange, after that happens the device should reboot its self. The only requirement is you are running stock v1.08.
Click to expand...
Click to collapse
Thanks o_g, there is no progress bar? And if i leave the vega notfhing happens. Running stock 1.08. I'm wonering if i have been sent a second or a return. The battery was fully charged out of the box and the screen polythene had most definately been removed and replaced. Need to do some more reading methinks

Thanks for the assistance guys, my memory card was the culprit. I had swapped it for a bigger one, and not copied the contents. Sorted now tho now to get flash working properly

demonknight9 said:
No need to install modaco R6 as it is not fully compatible with the latest vega firmware 1.8.
Click to expand...
Click to collapse
If I did this to my vega on the 25th January when it was delivered. what symptoms might present?
It seems to be working well bar "horizontal line gfx glitches" occasionally on the screen.

swollox said:
If I did this to my vega on the 25th January when it was delivered. what symptoms might present?
It seems to be working well bar "horizontal line gfx glitches" occasionally on the screen.
Click to expand...
Click to collapse
It works ok, you need to delete some of the apk's out of files/system/app. things like car home can be deleted and other little things. Like that it will not run out of space when you install it and it will not give you errors. This is just another option, that's all. Some more goodies will come along from modaco and xdadev like the new R7 rom addon that were made specifically for the 1.08 firmware.

thanks man, i just changed the 0 to a 1 at the end and it worked, then market updated the second time i opened it.
been trying to do this for over 2 wks

[Q] boot loop using cm7 from uSD card Please help.

Ok I used these instructions http://forum.xda-developers.com/showthread.php?t=1000957 to get a bootable uSD for my new NC.
Its running vs 1.2 now (I recently restored because 1.3 did the same thing).
I'm using a nightly cm7 209 for this. My problem is after the power down that comes when you install this stuff in the nook the first time. After you try to boot up you see the skate board android, the circle goes around it 4 times then the screen goes black and starts over again.
What am I doing wrong?
Please help

How did you do?
+ is your uSD good?
+ is the downloaded image good?
+ what tool did you use to burn the image?
+ which version of that tool?
+ did you successfully create the bootable uSD?
+ did you copy the CM7 and Gapp into root folder at the same time?
+ ?
+ ?
+ ?

votinh said:
How did you do?
+ is your uSD good?
Click to expand...
Click to collapse
I assume so its is working in other devices and puts up decent numbers with the crystaldiskmark test
votinh said:
is the downloaded image good?
Click to expand...
Click to collapse
again I assume so I downloaded it from the link posted above
votinh said:
what tool did you use to burn the image?
which version of that tool?
Click to expand...
Click to collapse
win32 diskimager 0.3 binary since it said it had the dll's from here https://launchpad.net/win32-image-writer/+download?vm=r very top link if I should be using something different I'm all ears and willing to try
votinh said:
did you successfully create the bootable uSD?
Click to expand...
Click to collapse
I assume so since it actually booted from the uSD and tried to install the cm7 build
votinh said:
did you copy the CM7 and Gapp into root folder at the same time?
Click to expand...
Click to collapse
no.. I have even tried the gapps yet. the instructions said to do the build then get it booted and turn on wifi and then do the gapps.

win32 diskimager 0.3 binary since it said it had the dll's from here https://launchpad.net/win32-image-writer/+download?vm=r very top link if I should be using something different I'm all ears and willing to try
Click to expand...
Click to collapse
Search for version 0.15.
In the meantime, I'll see if I still have it or not.

votinh said:
Search for version 0.15.
In the meantime, I'll see if I still have it or not.
Click to expand...
Click to collapse
I couldn't find .15 so I did the same with the binary of v.1 and it does the same thing.

[Q] Amatuer Noob needs help

I just got my NC and decided to give this a try instead of buying a N2A card.
Android Version 2.3.7
Kernel version 2.6.32.9
Mod Version CyanogenMod-7.1.0-encore
build Number GWK74
ClockworkMod 3.2.0.1
When I initially booted off the memory card everything was smooth until gapp. It loaded but when it came to selecting the apps when I clicked on one it flashed and just continued to set up. It didn't let me select any. No big deal because it worked fine.
I had force close issues so I ran Fix Permissions through ROM Manager and this seemed to help except for a few apps.
I used LCDDensity and changed that to 161 with Kill All which cleared up my force close issues on Words With Friends and Tweetcaster.
I get on today and notice videos are now missing from the market main screen and apps that I had yet to install are now no longer compatible with my device. They were last night but I was picking and choosing what I wanted on here. Why the sudden change? I rebooted the device just a few minutes ago and now the sudden change.
I also read about clearing davlik cache but how do you do this? I am not a programmer or developer so I have no clue. I have spent hours reading here everyday since Christmas and my mind is melting. I tried rebooting into recovery but I do not get the option to do anything. The penguin appears and a few things scroll down the screen and it reboots. I tried using the emulator and that won't work either unless I am typing something in wrong.
Are there any other tweaks or things I need to do to keep things stable and running smoothly? Are their certain things I need to clear regularly i.e. davlik cache, application cache or data?
I appreciate all the hard work and the time everyone puts into this. Please help. Like I said I need kindergarten instructions. Thank you.

First off, I've never had much success running from uSD. Even as far back as NookieFroyo. Once I made the move to running from eMMC most of my issues disappeared.
Davlik can be wiped from the Advanced selection when you boot to CWM as can Fix Permissions.

If you are going to run from SD then it is highly advisable to use a Sandisk Class 2 or 4 card. The brand does make a difference and others have found that other makes lead to slow downs and instabilities.
I would also recommend starting again following the veryGreen SD install method
http://forum.xda-developers.com/showthread.php?t=1000957
and using the MiRaGe KANG ROM.
http://forum.xda-developers.com/showthread.php?t=1344873
This is CM7 but with the latest improvements including kernel adding to stability and performance.

Also, never use Windows to format your uSD. The format utility in Windows can (and does) screw up the format. Use this freebie. Has always worked well for me. You would be surprised how many problems that involve uSDs are traced back to a bad format.

I used LCDDensity and changed that to 161
Click to expand...
Click to collapse
Setting to 161, you are asking for more issue.
Suggestion: set it back to 160.

skeeterpro said:
First off, I've never had much success running from uSD. Even as far back as NookieFroyo. Once I made the move to running from eMMC most of my issues disappeared.
Davlik can be wiped from the Advanced selection when you boot to CWM as can Fix Permissions.
Click to expand...
Click to collapse
How do I get to the Advance section and boot to CWM? When I try it through ROM Manager the device restarts with the penguin and after a few lines it says the system is ****ting down. It does not give me any menu options.
votinh said:
Setting to 161, you are asking for more issue.
Suggestion: set it back to 160.
Click to expand...
Click to collapse
I read that this was recommended and when I do it my apps that have issues work and they work well. No more force close issues.
Thanks for the advice guys. Like I said I have no experience with any of this. I am learning though and love to tinker with things and figure out how they work.

bobtidey said:
If you are going to run from SD then it is highly advisable to use a Sandisk Class 2 or 4 card. The brand does make a difference and others have found that other makes lead to slow downs and instabilities.
I would also recommend starting again following the veryGreen SD install method
http://forum.xda-developers.com/showthread.php?t=1000957
and using the MiRaGe KANG ROM.
http://forum.xda-developers.com/showthread.php?t=1344873
This is CM7 but with the latest improvements including kernel adding to stability and performance.
Click to expand...
Click to collapse
I did the veryGrenn SD install. Is there a link on how to install a new ROM. I read the link but I just do not understand it.

jsnake said:
I did the veryGrenn SD install. Is there a link on how to install a new ROM. I read the link but I just do not understand it.
Click to expand...
Click to collapse
To update the ROM on an SD card install power down, remove card then you put the card back onto the PC and copy the new ROM zip onto it but named as update-cm-*.zip. Put the card back in the Nook and power up with N button pressed until you see the screen flash. Choose reboot recovery and the new zip will be installed.
However, if you are doing a major ROM switch and haven't invested too much time installing apps etc yet then I would recommend just doing the VeryGreen install from the beginning to get a clean install.

I did a clean install and so far things are working well. Base off of the veryGreen install are there any "must have" settings or tweaks I need to do to keep things smooth? Any nook or CM7 apps you guys would recommend. I know it has been answered 50,000 times but I am losing sleep reading the forums here.
Thanks again for the help and your patience.

There are so many of apps that suitable for each individual personality, for me:
+ news: usatoday, bbc
+ sport: Y!spectacular, mobile sport
+ movie: flixter, moviefone
+ picture viewing: quickpic (must have)
+ time: clocksync (must have)
+ file navigate: file expert (must have), astro file manager
+ player: rockplayer
+ ebook: Mantano (recommended)
+ weather: fancy widget
+ web browser: Opera (like better), dophin HD
+ calculator: TI-83/86 emulators, also mortgage cal. and real science cal.
+ game: none
+ sex pos.: forget the name
+ few others that occasionally use.

Every one gets their own favorite apps to suit their interests. I personally go for ES file explorer for general file navigation and accessing my computers' shares wirelessly, Dolphin HD browser for the gesture navigation, moboplayer for playing media, and QuickPic for photo viewing.
But don't forget Nook Tweaks. This allows you to tweak the kernel and benefit from some of the good things in there that distinguish the Dalingrin CM7 kernel. Like overclocking to get a really good boost in performance (most people go for 1200MHz max for stability), undervolting to stretch the battery a bit, audio settings to make the stock feeble audio considerably louder (set DAC boost about 50%), and USB hosting if you want to connect USB peripherals.

jsnake said:
How do I get to the Advance section and boot to CWM? When I try it through ROM Manager the device restarts with the penguin and after a few lines it says the system is ****ting down. It does not give me any menu options.
Really? You are sure it's CWM 3.2.0.1? When you boot to recovery you don't get a Menu? If not, methinks your CWM is hosed. Have to say I do not ever recall not getting a CWM Menu. Nor can I call up seeing a "penguin"?
Have to say also ROM Manager is quirky at best. Used it a long time ago and found that it whacked my NC. Uninstalled and never used again. Found it was incompatible with other devices.
You might consider a new uSD install.
Click to expand...
Click to collapse

skeeterpro said:
Really? You are sure it's CWM 3.2.0.1? When you boot to recovery you don't get a Menu? If not, methinks your CWM is hosed. Have to say I do not ever recall not getting a CWM Menu. Nor can I call up seeing a "penguin"?
Have to say also ROM Manager is quirky at best. Used it a long time ago and found that it whacked my NC. Uninstalled and never used again. Found it was incompatible with other devices.
You might consider a new uSD install.
Click to expand...
Click to collapse
I'm not using SD CM7 currently myself but my recollection when I did is that the recovery is not a full clockwork but a stripped down one just designed to install update zips. As such you don't get the full menu and operation from ROM manager isn't going to work properly.

skeeterpro said:
Really? You are sure it's CWM 3.2.0.1? When you boot to recovery you don't get a Menu? If not, methinks your CWM is hosed. Have to say I do not ever recall not getting a CWM Menu. Nor can I call up seeing a "penguin"?
Have to say also ROM Manager is quirky at best. Used it a long time ago and found that it whacked my NC. Uninstalled and never used again. Found it was incompatible with other devices.
You might consider a new uSD install.
Click to expand...
Click to collapse
On this clean install I finally got it to work and there is no penguin. Just the menu that I should see so I finally cleared davlik cache.
I downloaded nook Tweaks as well.

jsnake said:
On this clean install I finally got it to work and there is no penguin. Just the menu that I should see so I finally cleared davlik cache.
I downloaded nook Tweaks as well.
Click to expand...
Click to collapse
Excellent! So all is well?
---------- Post added at 01:09 AM ---------- Previous post was at 01:09 AM ----------
bobtidey said:
I'm not using SD CM7 currently myself but my recollection when I did is that the recovery is not a full clockwork but a stripped down one just designed to install update zips. As such you don't get the full menu and operation from ROM manager isn't going to work properly.
Click to expand...
Click to collapse
Makes sense. Thanks for the clarification.

bobtidey said:
To update the ROM on an SD card install power down, remove card then you put the card back onto the PC and copy the new ROM zip onto it but named as update-cm-*.zip. Put the card back in the Nook and power up with N button pressed until you see the screen flash. Choose reboot recovery and the new zip will be installed.
However, if you are doing a major ROM switch and haven't invested too much time installing apps etc yet then I would recommend just doing the VeryGreen install from the beginning to get a clean install.
Click to expand...
Click to collapse
So I have done a clean install of veryGreen exactly as posted except that I have the latest stable instead of a nightly. So do I simply download that ROM file and do as you stated for MiRaGe Kang? Just asking because on that link there is a bunch of different things listed and I get kind of lost. All I need is the ROM file and follow what you said quoted above?
Thanks again.
I tried renaming the file but it says the name cannot contain * so what am I doing wrong. Searched the forums and can't find the answer.

jsnake said:
So I have done a clean install of veryGreen exactly as posted except that I have the latest stable instead of a nightly. So do I simply download that ROM file and do as you stated for MiRaGe Kang? Just asking because on that link there is a bunch of different things listed and I get kind of lost. All I need is the ROM file and follow what you said quoted above?
Thanks again.
I tried renaming the file but it says the name cannot contain * so what am I doing wrong. Searched the forums and can't find the answer.
Click to expand...
Click to collapse
The * is just shorthand for any name. You can't include * in the actual name as it is a wildcard character that matches any part of a name. The important part is that the new name starts with update-cm- so you can just put that on the front of the MiRaGe zip (which is all you need).

Thank you. I figured it out kind of. I downloaded that ROM and followed the instructions and rooted my nook which I did not want to do. I wanted to dual boot off the memory card. It is all a learning experience.
I did a factory restore and all was good again. Started fresh and was going for a new verygreen install and my memory card slot no longer locks the card in. I am so thankful I had completed the factory reinstall. My wife went to B&N today and exchanged it for me with no issue.
So for now I think I will stick to the verygreen install and tweak it to my liking until something stable for ICS comes about.
Thanks for your patience and help. Some really good people here helping out.

[Root] Phoenix OS x86/x64 v2.0.7 (13 June) Rooted Images

Hey guys, a new version of Phoenix OS (v2.0.7) is out and I have created rooted images for you guys to use.
Instructions:
Download the correct system rooted.7z file provided in the Download section and extract it
Install Phoenix OS and restart your computer.
Boot into Phoenix OS and finish the system initialization wizard. Restart the computer and boot into your main OS.
Go to C:\Phoenix OS (or wherever your Phoenix OS installation is) and replace the system.img file that's already there with the one you just downloaded
Reboot your computer now and boot into Phoenix OS.
Install the latest version of SuperSU. Sign in to Play Store using your Google account and update SuperSU that way. If you for some reason cannot use the Play Store, you can find SuperSU on the official thread. Download the flashable zip, extract Superuser.apk from the common folder, and install it in Phoenix OS by opening the .apk file with the default file manager that comes with the OS.
Update the binary by choosing Normal and your Phoenix OS should now be fully rooted
Download:
Phoenix OS x86 v2.0.7 (13 June) Rooted Image + original system.img + PhoenixOSInstaller_v2.0.7.151.32bit.exe
https://drive.google.com/drive/folders/0B_UTWXKFnZoNVGpBZmxQS0dhRjg
Phoenix OS x64 v2.0.7 (13 June) Rooted Image + original system.img + PhoenixOSInstaller_v2.0.7.150.64bit.exe
https://drive.google.com/drive/folders/0B_UTWXKFnZoNclN5SGdFUGlTRGs
Download Phoenix OS v2.0.7 here (original thread):
http://bbs.phoenixstudio.org/en/showthread.php?tid=6186
History:
Uploaded v2.0.7 system images

Oooh... now I can test this to see if it fixes my G+ compatibility issue

The Wrath of Kahn said:
Oooh... now I can test this to see if it fixes my G+ compatibility issue
Click to expand...
Click to collapse
Sure! Let us know if it works out well for you

meanhacker said:
Sure! Let us know if it works out well for you
Click to expand...
Click to collapse
Sadly, no. It is rooted successfully and everything else seems fine, but "device not compatible" again. Unfortunately this is a deal killer for me =/

The Wrath of Kahn said:
Sadly, no. It is rooted successfully and everything else seems fine, but "device not compatible" again. Unfortunately this is a deal killer for me =/
Click to expand...
Click to collapse
Did you try both, the 32 and 64 bit versions? I will try it on my Surface Pro 3 sometime and will let you know my results. Meanwhile, you can post it on their official forum and let them know that G+ isn't working

meanhacker said:
Did you try both, the 32 and 64 bit versions? I will try it on my Surface Pro 3 sometime and will let you know my results. Meanwhile, you can post it on their official forum and let them know that G+ isn't working
Click to expand...
Click to collapse
Only tried 64 bit... guess I could give 32 bit a shot. Tomorrow then...

The Wrath of Kahn said:
Only tried 64 bit... guess I could give 32 bit a shot. Tomorrow then...
Click to expand...
Click to collapse
I tried opening G+ on the v2.0.6 and got the same error as you. Perhaps you can use the browser to browse G+ for now until a solution is available? Also, look into spoofing your deice model into a model of an actual tablet. Maybe that will work if you edit the build.prop file.

If anyone get's "grub minimal bash like line editing issue" when trying to boot
Hi I just tried phoenix OS. yesterday on my unbranded baytrail tablet (ub15ms10) I was stuck with this issue for a while and I finally came up with the fix using the grub prompt! (I used "rufus" to create the boot usb drive)
First, list your drives with ls ls Mine came up with hd0 and some others, but since I was booting from a usb drive, that's all that matters at the moment. hd0 will be the drive that you need so set it as the target and below is basically what you need to type to try it out without installing.
set root=(hd0,1)
linux /kernel root=/dev/ram0
initrd /initrd.img
boot
You should then be able to boot Pheonix OS 2.0.7 32bit. I did not try the 64bit version since there's no point because tablet has less then 4GB of RAM. What works: It makes good use of the tablet's GPU, it didn't lag in anyway for games such as clash royal. Browsing is good, playstore works..The performance is nice, It runs well on a 2GB ram tablet with a 1.3Ghz Intel Atom Z3735F. GPS works, bluetooth works.
What doesn't work: No audio, no brightness control. I didn't bother testing anything else since I lost interest as soon as audio didn't work. I'd probably be able to fix it myself by messing around with the kernel parameters but it's a PITA.

meanhacker said:
I tried opening G+ on the v2.0.6 and got the same error as you. Perhaps you can use the browser to browse G+ for now until a solution is available? Also, look into spoofing your deice model into a model of an actual tablet. Maybe that will work if you edit the build.prop file.
Click to expand...
Click to collapse
I tried editing the build.prop before with no luck, but I'm not experienced in doing it so I may have missed the fields that I needed.

irex102 said:
Hi I just tried phoenix OS. yesterday on my unbranded baytrail tablet (ub15ms10) I was stuck with this issue for a while and I finally came up with the fix using the grub prompt! (I used "rufus" to create the boot usb drive)
First, list your drives with ls ls Mine came up with hd0 and some others, but since I was booting from a usb drive, that's all that matters at the moment. hd0 will be the drive that you need so set it as the target and below is basically what you need to type to try it out without installing.
set root=(hd0,1)
linux /kernel root=/dev/ram0
initrd /initrd.img
boot
You should then be able to boot Pheonix OS 2.0.7 32bit. I did not try the 64bit version since there's no point because tablet has less then 4GB of RAM. What works: It makes good use of the tablet's GPU, it didn't lag in anyway for games such as clash royal. Browsing is good, playstore works..The performance is nice, It runs well on a 2GB ram tablet with a 1.3Ghz Intel Atom Z3735F. GPS works, bluetooth works.
What doesn't work: No audio, no brightness control. I didn't bother testing anything else since I lost interest as soon as audio didn't work. I'd probably be able to fix it myself by messing around with the kernel parameters but it's a PITA.
Click to expand...
Click to collapse
For the audio and other issues for baytrail/cherrytrail devices, someone made a kernel that apparently fixes these issues in debian/ubuntu which can be found here: https://yadi.sk/d/pW1Fbl-VyVPoR/Linux 4.12/Linux 4.12rc5. If someone else could use these kernels sources to apply a patch for android x86 that would be awesome.

irex102 said:
For the audio and other issues for baytrail/cherrytrail devices, someone made a kernel that apparently fixes these issues in debian/ubuntu which can be found here: https://yadi.sk/d/pW1Fbl-VyVPoR/Linux 4.12/Linux 4.12rc5. If someone else could use these kernels sources to apply a patch for android x86 that would be awesome.
Click to expand...
Click to collapse
Hey I found some readied kernels that fixes all the issues on baytrail tablets for android x86 7.1: https://drive.google.com/drive/folders/0B1HDhURlGNctY045UWFhalo5MW8 All that's left is to patch a rom for these devices. More info found here: https://github.com/burzumishi/linux-baytrail-flexx10/issues/12#issuecomment-309275211

#Quest
i'm already install phoenix os latest version, can i replace old system.img with system.img rooted without uninstall my latest phoenix os already installed on my pc?

Nicojoy said:
i'm already install phoenix os latest version, can i replace old system.img with system.img rooted without uninstall my latest phoenix os already installed on my pc?
Click to expand...
Click to collapse
What version of Phoenix OS do you have installed? If you have v2.0.7, you're in the right thread, so go ahead and download either a 32 or 64-bit version of the rooted image and replace it with your current system.img.

This will work on a Nexus 9 or it only works in pc's?

when i update su binary like you say it says to me installation failed
edit: ifound soulition its to update super su to the latest version with play store or aptoide or arc market or app vn and the install the binary data its soooo easyyyyyyy

Waiting for rooted system.img for Phoenix OS 2.1.0

SU Binary busy?
So I followed the instructions (although the step 6 is kind of confusing, English is not my native language so...) booted with the rooted sys image, installed superSU from the Play Store and when I open it it says "SU binary busy" and send me to a FAQ where it says that
"The SU files are already occupied by other software, such as Kingroot."
So I need to install the binary somehow? or something went wrong?
Oh BTW, used Root checker and it says it's not propely installed
Thanks for the image, buddy

MrSlenderman said:
"The SU files are already occupied by other software, such as Kingroot."
Click to expand...
Click to collapse
I also ran into this problem using the newest version from the play store, I could avoid this though by installing version 2.79 through an apk.
But now it won't let me update the binary, since everytime I select "Normal" the installation fails after a minute or so.
Any ideas?

Guys, when to expect a rooted image for V 2.1.0 x86

thank you, but i bit confused about when i update the os,
so when i update the os, the rooted image will gone ? and i need to wait for another rooted image ?

I can't download/write a file larger than 2Gb (HELP pls)

Hi folks,
I think few people have already experienced that but I literraly can't download single file over 2Gb which is really annoying.
Ofc I've already performed a full wipe, cleaned everything, reinstall OS with stock firmware. I also tried to switch from official Oxygen OS to Open beta but nothing works.
The only thing I didn't tried is to format storage into f2fs (i'm actually in ext4)
But 1- I don't think it'll work because I didn't have any problem in ext4
2 - I can't install any OS after it's formated (I get error 7) even if I know how I could get rid of this error.
Moreover, I can't use any OTG stuff and I think it's linked cuz this issue appeared at the same time (or my OTG cable is maybe dead lol)
If anyone has an idea it'd be really great.
I'm facing this issue for weeks now and because it's very uncommon, no one try to help me...

Download using Android Download Manager and you are good to go

Hey. Finally I found a solution.
I have no issue with chrome 68 and the new download manager.
However, I don't understand why I was facing this problem with old chrome versions.
And unfortunately my OTG cable still not work

Opaze said:
Hi folks,
I think few people have already experienced that but I literraly can't download single file over 2Gb which is really annoying.
Ofc I've already performed a full wipe, cleaned everything, reinstall OS with stock firmware. I also tried to switch from official Oxygen OS to Open beta but nothing works.
The only thing I didn't tried is to format storage into f2fs (i'm actually in ext4)
But 1- I don't think it'll work because I didn't have any problem in ext4
2 - I can't install any OS after it's formated (I get error 7) even if I know how I could get rid of this error.
Moreover, I can't use any OTG stuff and I think it's linked cuz this issue appeared at the same time (or my OTG cable is maybe dead lol)
If anyone has an idea it'd be really great.
I'm facing this issue for weeks now and because it's very uncommon, no one try to help me...
Click to expand...
Click to collapse
Problem is with chrome. Try any other browser or use any download manager it will work fine

[email protected] said:
Problem is with chrome. Try any other browser or use any download manager it will work fine
Click to expand...
Click to collapse
Yep, this work with another chrome version. Do you know btw why download suddently doesn't work with previous chrome version ?
And do you know by any chance why my OTG is not working (my OTG stick is working, i tested it on an other device)

Opaze said:
Yep, this work with another chrome version. Do you know btw why download suddently doesn't work with previous chrome version ?
And do you know by any chance why my OTG is not working (my OTG stick is working, i tested it on an other device)
Click to expand...
Click to collapse
Chrome always had problems downloading files larger than 2GB. Not sure whether they have fixed it now , i started using ADM to capture my downloads to fix this issue.
And do you know by any chance why my OTG is not working (my OTG stick is working, i tested it on an other device --> Your phone is rooted ? If so, which ROM are u using ?

Damn

[email protected] said:
Problem is with chrome. Try any other browser or use any download manager it will work fine
Click to expand...
Click to collapse
[email protected] said:
Chrome always had problems downloading files larger than 2GB. Not sure whether they have fixed it now , i started using ADM to capture my downloads to fix this issue.
And do you know by any chance why my OTG is not working (my OTG stick is working, i tested it on an other device --> Your phone is rooted ? If so, which ROM are u using ?
Click to expand...
Click to collapse
Oh well, I never faced this issue with chrome before but it's fixed anyway.
Yes my phone is rooted. I'm using OOS Open Beta 15, but even when I was on official OOS, it didnt work... I also tried to wipe + reinstall the firmware, but even with OOS Nougat it didnt work...
I wonder if it's an encryption issue

it's google. they've crippled android more each version out of contempt for power users. Anyone paying attention can easily see that their actions are not aligned with their supposed philosophy they like to brag on. If they spent half as much time on quality control as they do on platform control, then they might have something besides borked ux. Even their stock rom is useless
https://plus.google.com/+ArtemRussakovskii/posts/G5bx1vEqjMz

ElwOOd_CbGp said:
it's google. they've crippled android more each version out of contempt for power users. Anyone paying attention can easily see that their actions are not aligned with their supposed philosophy they like to brag on. If they spent half as much time on quality control as they do on platform control, then they might have something besides borked ux. Even their stock rom is useless
https://plus.google.com/+ArtemRussakovskii/posts/G5bx1vEqjMz
Click to expand...
Click to collapse
Wow I didn't notice that. To be honnest, I try to get rid of those google ****s. I deleted chrome because of my issue and installed Kiwi browser.
However, as far as I see, no one is facing this OTG issue...
I'll maybe give up and just use my computer for the transfers between my usb stick and my phone