because i want to install v4a so i download busypro and install, it show success, but when i uninstall and reboot my phone, my root dispare, i try flash the zip again but it doesn't help
Related
I rooted with newest kingroot i currently don't have access to a computer atm, it displays ads on lockscreen and lags ive tried everything to replace w supersu it doesnt delete it ive noticed the script tries to delete "com.kinguser" stuff i also noticed they changed the kingroot apk to "cafeuser.apk" inside a folder called cafeuser i dont want to just delete it because like i said i dont have access to computer i want to know if anyone knows a successful way to uninstall this new kingroot 4.9.6 and keep root status and perhaps use superuser or supersu without computer access safely thank you for your time
Be advised im using a metropcs LG K7
LG MS330 running 5.1.1
may help
When asking for help you need to provide additional information such as device info:
sdk
manufacturer
model
However I faced the same problem too!
If I understood you correctly...so first thing first.
1. install superSU first & use root to install it as a system app any root apps can do that)
2. before rebooting the phone....please install busybox utilities from an app called "Busybox" on google play
3. reboot the device
4. once successfully rebooted open SuperSU & grant it root from kingroot & try to get it to install its binary.
- if it cant, disable kingroot after you know superSU was granted root & then try again.
-if it doesnt work again...then uninstall kingroot & relaunch SuperSU & try to let it install its binary again.
I have the lgms330 with the same kingroot version, did yours also automatically convert it to a system applies? I've never seen it do that on my other phones. Also my PlayStore stopped working when the update showed up there. Lol only good thing is Google also stopped telling me it would hurt the system. I have the newest version downloaded but I'm terrified to install it until I get some opinions cuz I currently don't have a monitor for my computer in case I brick it.
How to download kingroot
Follow this ROM Installation Guide.
Root it with KingoRoot.
Flash patched aboot.img by typing "dd if=/sdcard/aboot_patched.img of=/dev/block/mmcblk0p7" command in Android Terminal Emulator App, I don't like to use PC.
Then download ChainFire SuperSU from GooglePlay.
On first application start it will ask to install su Binary, say Yes.
Wait about 5 minutes or until it fails…
If so, don't worry, be happy.
Reboot…
Try again.
It must ask for Root Authorization!
Continue Rebooting and tying again and again, until you see su binary installed successfully!
Now you can dance, you Switched to SuperSU
After that you can remove all KingoRoot sh**t and install SuperSU like System app in application options…
I'm still experimenting with this rom, so I'm keeping KingRoot and SuperSU apps, for reroot my device if I will reflash KDZ.
Since now we have Working TWRP…
Simply flash it via recovery.
There are two ways available : System(by system partition) and Systemless (by Repacking and flashing Modified Kernel Image)…
Google it to know more ?
(1) Download this: https://s3-us-west-2.amazonaws.com/supersu/download/zip/SuperSU-v2.79-201612051815.zip
(2) Place it in /sdcard/
(3) Reboot to TWRP.
(4) Select "Install" and go to the folder where you had placed the SuperSu zip and select the zip.
(5) Swipe to confirm flash.
(6) Reboot to system.
(7) Remove kingoroot's supersu.
D_Vovan_238 said:
Follow this ROM Installation Guide.
Root it with KingoRoot.
Flash patched aboot.img by typing "dd if=/sdcard/aboot_patched.img of=/dev/block/mmcblk0p7" command in Android Terminal Emulator App, I don't like to use PC.
Then download ChainFire SuperSU from GooglePlay.
On first application start it will ask to install su Binary, say Yes.
Wait about 5 minutes or until it fails…
If so, don't worry, be happy.
Reboot…
Try again.
It must ask for Root Authorization!
Continue Rebooting and tying again and again, until you see su binary installed successfully!
Now you can dance, you Switched to SuperSU
After that you can remove all KingoRoot sh**t and install SuperSU like System app in application options…
I'm still experimenting with this rom, so I'm keeping KingRoot and SuperSU apps, for reroot my device if I will reflash KDZ.
Since now we have Working TWRP…
Simply flash it via recovery.
There are two ways available : System(by system partition) and Systemless (by Repacking and flashing Modified Kernel Image)…
Google it to know more
Click to expand...
Click to collapse
I rebooted like +10 times and still nothing. Also it doesn't ask for root authorization after reboot
Krystiannnnnn said:
I rebooted like +10 times and still nothing. Also it doesn't ask for root authorization after reboot
Click to expand...
Click to collapse
Follow this:
(1) Download this: https://s3-us-west-2.amazonaws.com/supersu/download/zip/SuperSU-v2.79-201612051815.zip
(2) Place it in /sdcard/
(3) Reboot to TWRP.
(4) Select "Install" and go to the folder where you had placed the SuperSu zip and select the zip.
(5) Swipe to confirm flash.
(6) Reboot to system.
(7) Remove kingoroot's supersu.
Hello all,
This may seem like a stupid question, but I want to make sure that I know what i'm doing before I mess something up and become
So I'm running a Samsung Galaxy S5 (G900V ovbiously), and it has the tobisha emmc chip
Is the only way to gain root on Marshmallow/Nougat or whatever is by reverting to Lollipop, gaining root access, installing TWRP, and then flashing LineageOS/some ROM?
Directions For Users With CID 11 Toshiba eMMC
1. Download EMMC_11_ Root S5_QB2_PB1.zip
2. Unzip
Copy the following to your External SD card:
Root S5 Folder,
EMMC_11_PB1_5_0_1_LL_Firmware_Bootloader.zip, EMMC_11_QA1_6_0_1_MM_Firmware_Bootloaders.zip,
and the TouchWiz ROM you want to install.
3. Reboot Phone to Download Mode (Pwr +Vol Dwn+Home)
4. Use Odin 3.12 and load the COMBINATION_VZW_FA44_G900VVRU2APA1_VZW2APA1_257265 6_REV00_user_mid_noship_MULTI_CERT.tar.md5 in the AP Slot
5. Flash and let the phone reboot. It will reboot to recovery and finish install then it will reboot and take about 20 seconds to boot.
6. If you do not have an External SD Card, copy the following NOW to your Internal Storage:
Root S5 Folder,
EMMC_11_PB1_5_0_1_LL_Firmware_Bootloader.zip, EMMC_11_QA1_6_0_1_MM_Firmware_Bootloaders.zip,
and whatever TouchWiz ROM you want to install.
7. Use the File Manager in the app drawer of the phone and install Apex_Lancher.apk press home button and set Apex as the default launcher.
Install Superuser.apk, Busybox.apk and SafeStrapKK.apk do not open anything yet.
8. Now Install tr_v2.apk.
Open TowelRoot and CLICK MAKE IT RAIN . It should tell you you have succeeded.
9. Now Open Superuser app and click "New User" to install it.
Once done, open SuperSU and update the SU binaries using the "NORMAL" method. It will tell you you need to reboot. You can skip doing this. (If the Superuser install hangs for more than 5 minutes reboot phone and try to install it again.)
10. Now open the BusyBox app, grant SuperSU access and install BusyBox.
11. Now open SafeStrap, grant SuperSu access and click "install recovery". If the SafeStrap recovery fails to install, make sure BusyBox is installed by rerunning the BusyBox app (it will tell you if BusyBox is installed) if not click "install" again, reboot phone and open SafeStrap and try to install recovery again
12. Once SafeStrap Recovery is installed click "reboot to SafeStrap Recovery".
13. Once in SafeStrap Recovery, choose what firmware you want to be on:
Lollipop 5.0 Firmware=EMMC_11_PB1_5_0_1_LL_Firmware_Bootloader.zip
Marsmhallow 6.0 Firmware=EMMC_11_QA1_6_0_1_MM_Firmware_Bootloaders.zip
14. Install the firmware zip, and then flash a TouchWiz Lollipop ROM. (Here is the latest stock rooted Lollipop Rom: VZW_BPB1_ODEX_DEODEX_V9.zip). You may want to download a copy of the latest SuperSu zip, and flash if installing a Lollipop ROM that is not rooted. Remember, you cannot root Marshmallow ROMs, so do not try and flash the SuperSu zip on a Marshmallow Rom (you will softbrick if you do).
15. After you install any Lollipop ROM, you may need to reinstall SafeStrap Recovery. Most of the time you don't have to and SafeStrap can be reached by flashing the KitKat Kernel in Download Mode with ODIN. But, in some cases, when flashing a ROM that flashes a system.img instead of a system folder, you may lose SafeStrap during install. This will be the case if you install the above ROM. You can reinstall it after the ROM is booted up. A Safestrap-G900V-4.04_LL_MM.apk is included that will flash a version of SafeStrap that will allow you to reboot to SafeStrap Recovery without flashing a KitKat kernel in Odin. Install BusyBox again from the BusyBox App in the RootS5 Folder. Install Safestrap-G900V-4.04_LL_MM.apk and make sure to grant SuperSU access. It may take a few seconds to prompt. If SafeStrap is not installed, click "Install Recovery". If Safestrap is still installed click on "Uninstall Recovery", close the app, and reopen it. It should say recovery is not installed. Now click on "Install Recovery". If this doesn't work, reboot the phone and try again. Once installed, you can just click reboot to SafeStrap from the SafeStrap app and you will reboot straight to SafeStrap. Remember to flash the appropriate Kernel when leaving SafeStrap!
Download and place these on your device:
LL_KERNEL_SS-FF_Flashable.zip, and
MM_KERNEL_SS-FF_Flashable.zip
If something bad goes wrong you can usually get back to SafeStrap by simply rebooting the phone to Download Mode and flashing NI2_stock_kernel.tar.md5. When the phone reboots, watch for the SafeStrap splash screen and enter SafeStrap.
16. Do NOT change ANY boot options in SafeStrap. ROM slots cannot be used, so you must flash to the Stock ROM slot EVERY TIME OR YOU WILL SOFTBRICK. Some functions don't work in SafeStrap, like choosing an image file to flash directly. All image files must be flashed via zip file.
---------- Post added at 12:50 AM ---------- Previous post was at 12:49 AM ----------
Get the needed files at https://forum.xda-developers.com/ve.../testers-required-easier-root-method-t3561529
When I try to install a module, it gives me a "data/magisk not setup properly" error. Please help.
I have tried reinstalling magisk and pressing on direct install again but it still doesn't work.
KingCraft143 said:
When I try to install a module, it gives me a "data/magisk not setup properly" error. Please help.
I have tried reinstalling magisk and pressing on direct install again but it still doesn't work.
Click to expand...
Click to collapse
Is below that message, something asking you to update Magisk first?
If there isn't, well... Try to go Magisk Manager and check for updates, if there's any, just download and install them. Try again.
If there aren't, try to go XDA's Magisk thread, download Magisk uninstaller as well as flashable Magisk and Magisk Manager apk, both in their latest versions.
In case you've installed TWRP, Then reboot to Recovery and flash Magisk uninstaller... Just in case, flash TWRP again.
After that Reboot to Recovery once again and flash Magisk, then Reboot to System.
Then, in case you can't find Magisk Manager app, install it and update Magisk, this time from app itself.
Hi everyone,
Sorry for my language : i don't speak english very well.
I'm a new user of this forum.
I'm a new user of root, rom, ...
And I need help for hack Pokemon Go on my Nexus 4.
I found this project : "Pokemon Go MITM" on GitHub by rastapasta (sorry I can't put a link)
And I would like to try it.
I tried several things but I have trouble at all step and I don't understand that I do.
To use MITM, I think I need :
root my phone
Install the Xposed Framework
install Pokemon Go Trust Certificate via the Xposed Installer
install the Xposed module pokemon-go-xposed
To use Pokemon Go on rooted phone, I think I need to hide the root :
Install Magisk Manager
Install TWRP
Install Magisk
I think my phone is rooted now. I have the SuperSu app and Pokemon Go said something like that : "Phone or OS not compatible with Pokemon Go".
I don't know what it's finish with the Xposed Framework.
I had install Magisk Manager but now I have trouble to use TWRP and install Magisk.
First, can you confirm that my lists of things to do are correct?
And after, someone can help me step by step and explain me what each step do?
I think, the first thing to do is to be able to launch Pokemon Go on rooted phone.
So Install TWRP and Magisk.
Correct?
TWRP + Magisk
I continued to try by myself.
After install TWRP by the TWRP App, I don't understood that we need to reboot in recovery mode to launch TWRP.
So In TWRP, I install Magisk from the zip downloaded previously by the Magisk Manager App.
So now, I have TWRP and Magisk installed.
Next step : use it to hide root to Pokemon Go App.
But I don't know how to do it yet!
Magisk Hide
According to the website of magiskmanager, I enable the "Magisk hide" option in the setting of "Magisk Manager".
But no new option appear in my menu.
And when I close and reopen Magisk Manager, the option "Magisk hide" is unable now !
I don't no why !
Perhap's the problem is that I rooted my phone before install TWRP and Magisk ?
I don't remember how I do that but I had the SuperSu App on my phone.
But now, I don't see the SuperSu app since I installed TWRP and Magisk!
Need help!
Magisk hide don't work
I decided to restart from step 0 : I unroot my phone.
To do this, I re-install the official ROM.
I follow the tutorial find on tutoriels-android dot net.
And after, I reinstall TWRP (without root) and Magisk.
But same conclusion : I can't use Magisk hide.
Now I really need help!
Please!