Hi, i installed twrp 3.1.1-1 cheesbuger ( latest twrp) but not recognized any of my three otg pen. Does anyone know the reason and can you help me?
i have rom stock oos 4.5.8 with rooth. Thank you in advance!
Try unofficial version of twrp , i think it work with otg.
The latest official version of TWRP (3.1.1-1) does not have the commit needed to make USB OTG work. The next version, whenever it is released, will have a working USB OTG. Meanwhile, you can use this unofficial TWRP that has USB OTG working.
Hi c3drik 67 thank you very much!!!Solved with flash twrp unofficial!!!Thanks bro!
Hi Shadowstep, Thanks for your help, your time and explanation. Solved with flash of unofficial version of twrp. Thank you very much!
Related
Hi! I just got a Nexus 7 given to me and it had a older version of CM installed so I jumped the gun and updated to 12.1 CM with updating CM recovery checked accidentally. How can I switch to TWRP recovery before I reroot and flash DU 6.0? I am sorry for the stupid mistake but I don't want a brick so I am asking for help! I don't have my PC at my current location so not sure what to do! I really appreciate any help, info, or advice! Thanks!
use flashify to install twrp without computer
Hey again sorry but I got it figured out by flashing SU first to reroot then used TWRP manager to install new TWRP recovery! Everything seems good so I will try a new ROM soon! Thanks again!
Guide me to install HYBRID v3.4 recovery......so that i can install CM14....
currently i am using this cm13 rom(version details in the pic).
Finally, what i want is the change of recovery !!!!!!!
I had the same issue but I was able to fix it.
I flashed halogenOS: http://forum.xda-developers.com/oneplus-2/development/rom-halogenos-oneplus-2-t3377799
Then I was able to flash the latest TWRP via fastboot and it's working great.
First do all necessary backups etc.
Hello,
I tried to install the new Nougat rom for jiayu S3, but it was unsuccessful. Phone got soft bricked, but I recovered it with a twrp backup.
My OS is android 4.4.4, and TRWP is 2.8. After installing the new rom , an installation error appeared and phone did not work.
I wonder it it's due to twrp 2.8, but I can't install twrp 3 (S3_h560_TWRP_3.0.2-0). There was an installation error with flashify...
The question is: can I install 7.0 from 4.4? Is it an Android problem, a TWRP issue, or just my clumsiness?
Thank you!
achilipu05 said:
Hello,
I tried to install the new Nougat rom for jiayu S3, but it was unsuccessful. Phone got soft bricked, but I recovered it with a twrp backup.
My OS is android 4.4.4, and TRWP is 2.8. After installing the new rom , an installation error appeared and phone did not work.
I wonder it it's due to twrp 2.8, but I can't install twrp 3 (S3_h560_TWRP_3.0.2-0). There was an installation error with flashify...
The question is: can I install 7.0 from 4.4? Is it an Android problem, a TWRP issue, or just my clumsiness?
Thank you!
Click to expand...
Click to collapse
in short:
To go from 4.4.4 to Nougat you need to go via LP RC5 via flashify using firmware upgrade.
This is because the partition layout is different from KK to LP onwards.
Then you can flash Nougat using TWRP (which will be version 3)
Thank you very much for your answer.
Please forgive me for my ignorance but, which LP ROM should I download? Can I install it via flashify, via TWRP 2.8, o flash?
Thank you again!
You can not use Flashify, you have to do it using Flashtools (with a PC) to go from KK to LP. Download LP 5.1.1 RC 5 from MAD.
fusant said:
You can not use Flashify, you have to do it using Flashtools (with a PC) to go from KK to LP. Download LP 5.1.1 RC 5 from MAD.
Click to expand...
Click to collapse
thanks to correct me, I thought Flashtools was meant
Well, I'm in trouble now... I installed successfully 5.1 in my S3, but when updated twrp 2.8 to 3.0, it did not work, so I can't install Nougat...
Now I have no twrp, and no root. How can I root to install twrp? I can't install superSU neither....
I'm sorry if it has been already answered but I can't find it.
Thanks a lot
I re-installed LP with Flash tools and everything worked right. (In twrp , it says 2.8 version, instead of 3.0, though).
Now I installed Nougat, and everything is ok.
Thank you for your excellent job!
Its a shame.
7 years unlocking bootloaders, installing CWM or TWRP or Philz recovery, flashing rom after rom, not even one device bricked, and today, i messed up, i hope its not bad.
So the short version of what i did is that i flashed twrp.img trough and older version of twrp and now it wont boot into twrp, it says that it failed to verify the recovery image or something like that, and my laptop wont recognize the cellphone, the cellphone boots into the latest Havoc rom but without Gapps and without root because i did not install it beforehand, when in bootloader mode it just says that it could not recognize the device.
The long version is that i had Resurrection Remix, obviously an unlock bootloader, magisk etc... everything was fine until today that i tried to install Havoc, the installation went well but i found out that ambient display was not working, someone told me that the previous version of Havoc did not had that problem so i tried to flash it but it bootlooped for like 1hr, so i read that the version of TWRP provided by the OP was the way to get it to work, i downloaded the .img file and flashed it trough TWRP and tried to install Havoc again but i was stuck in a bootloop, so i flashed the latest Havoc build so i could download the latest version of twrp, i did not flash Gapps or Magisk because i was going to re flash the rom and then flash Gapps and magisk, so i downloaded TWRP and flashed trough TWRP and thats when the sh$& hit the fan, now it wont boot into TRWP and my laptop wont recognize the device, neither on android nor in bootloader mode.
So, thank you guys in advance for your help, tomorrow im going to try on a computer at my work and see if its my computer and if not, well, ill have to se what you geniuses come up with. thank you so much again.
Info:
Rom build number: opm6.171017.030.h1 or 20180811 android 8.1.0
TWRP: i started with 3.2.2-0 then i downgraded to 3.2.1-0 and the one that messed up everything was 3.2.3-0
By the way, I have a full twrp backup of when my phone was stock, (but no way to use it) T_T
Can anybody help me to root this latest version? Is there any special TWRP to boot and then flash latest Magisk?
Use last cosmicdan twrp and last magisk. Easy.
Cheers
I also cannot root my phone after jan updates. after flashing magisk and reboot, there's a black screen in the middle of bootscreen and it restarts the bootscreen and my phone doesnt get rooted.
tonycapuozzo said:
Use last cosmicdan twrp and last magisk. Easy.
Cheers
Click to expand...
Click to collapse
tried the latest twrp and magisk 18.0 .
*UPDATE*
I forgot to enable oem unlocking and USB debugging.
and also mount system in TWRP before flashing magisk.
cheers!
kupuk23 said:
and also mount system in TWRP before flashing magisk.
Click to expand...
Click to collapse
When next OTA arrives, you will know why it fails to install There is absolutely no reason to mount system partition to flash Magisk.
Plz can anybody plz tell me how to root or unlock camera 2 api in ma a1 latest pie june2020 update
it's a simple procedure
just unlock bootloader then boot into TWRP then flash recovery flasher zip and then flash Magisk zip and reboot
I've flashed all stock firmwares and get root with this simple procedure but note I've used TWRP 3.3.1-0 from Giovix92 because TWRP 3.2.1 flasher zip didn't work on latest firmware and i used Magisk19.3 its the most stable Magisk version in my opinion i never faced any problem with this version