Need Help with No Signal. - Zenfone 2 Laser Q&A, Help & Troubleshooting

Hello, I've erased modemst1 , modemst2 and fsg with fastboot command. after that my phone have no cellular data on sim 1 ( Can make phone call but no internet data), On Sim 2 there are no signal at all. also my imei are gone. I managed to get my imei back (with this guide https://www.youtube.com/watch?v=m9hq-FiDn58 ) but my signal issue isn't fixed.
Thanks for any advice.
My Device is ZE550kL/Z00L 16GB/2GB MSM8916
Here is my device info screenshots https://drive.google.com/open?id=0B6UOUK9Gdri8WDRsYTJqcEpiQlE

Related

No network in sim slot 1

Hi everyone, I'm new to this forum.
I purchased a Moto X Play a couple of days back, everything was working fine till today morning when I was struggling with getting 3g network on 4G/3G preferred mode. I decided to change the preference in phone setting using*#*#3646#*#*.
Upon trying different options it remained stuck to gsm only mode, so I tried clicking "turn radio off" a few times which would make the signal go and come back in a few seconds but suddenly I lost network in sim 1 and have been trying everything for last couple of hours but won't get the signal back. I even tried swapping the sims and using a different sim but network in slot 1 is still off the radar. In the sim setting the phone would show the sim but there is no network. Any help in this regard will be highly appreciated.
Thanks
Asgar
lastweek i faced same problem.
It is caused by selecting us band
you can just flash modem and it will recover.
modem file is in this forum. you can find it easily
Thanks for the reply. Can you please share the link to the file? Also please tell me if it will void the warranty as I've the option of replacing this piece.
http://forum.xda-developers.com/moto-x-play/help/modem-file-t3255312
get modem.bin file at this page, and flash it.
fastboot flash modem modem.bin
fastboot erase modemst1
fastboot erase modemst2
I'm not sure but you don't have to unlock your bootloader for this process, so your warranty will be ok. i think.
Do I need a pc for this process or it can be done on phone itself? Can u plz share some step by step tutorial as I am a novice. Also please tell me if there is some simple method to do this without using a pc.
Update: the ROM in above link is for single sim model while mine is a dual sim model.

Moto G4 Amazon version, cellular network problem, stock in 4G

I have this really weird problem with my Moto G4, for some reason it is stock in 4G, even if I go to settings and try to make it stay on 3g or 2g, I have also try with the code *#*#4636#*#* and nothing. I factory reset it a couple of times now and it doesn't change anything, the weird thing is that it was working properly before, making calls and everything, at this point I don't know if I should just return it to Amazon or try to mess around with the software to see if that makes any difference. BTW Im not in the US so returning it to Amazon should be my last option since it is quite complicated. Thanks for any help!
I've had a similar issue where I could not connect to LTE. I was stuck on 3G, and when I specified LTE-only, no signal. Reboots/etc didn't fix it, but I was able to fix it by booting the G4 into fastboot, connecting to my computer, and issuing the following commands:
fastboot erase modemst1
fastboot erase modemst2
Rebooted the device and it connected to LTE again.

Zuk Z1 Diag Port and Repairing Partitions

Hello Everyone!
Somehow I managed to lose my imei and I need to repair that now. As far as I know, I need to open diag port and use qpst to the processes in order:
1.backup,
2.alter the backup,
3.break the modemst1, modemst2 and fsg partitions
4.and restore the backup.
However, I cannot open diag port 9008. I applied "setprop sys.usb.config diag,adb" command but no success. Also key combination and "adb reboot edl" or fastboot commands are not appliable.
Currently I'm running 7.1 nightly release. Without opening diag port, I guess I cannot go further to mess with partitions. What should I do to complete this process and get my sim signal back?
Thanks in advance.
(Note: Repairing IMEI numbers is an illegal action and also you may brick your cell forever. I am doing this because I have to. There is no service center in my country. Furthermore, If you hesitate to post anything under this post, that's okay. You may send me a pm or leave me with no sim card notification on my beloved Zuk Z1)
Hi are you find solution for yours problem?

Redmi note 3G Shows name of network but no signal

I am having redmi note 3G 2013121 which was booting only in recovery mode. So I flashed it using SP tool and FASTBOOT ROM 7.5.2.0.KHDMIDE, but accidentally I used option Download+Format due to which I lost my IMEI number and NVRAM.
So I rooted the phone and loaded the IMEI with help of MTK DROID ROOT & TOOL.
Now My phone detects the SIM shows the operator name but no signal. I tried flashing MIUI 6, MIUI 5 but I am not able to fix it.
please help on same.
Also I loaded the NVRAM from other device 2013121 but still I am not able to fix the issue
Also when I search network manually it shows no network found or some times TATA DOCOMO 2G is shown
I tried Airtel and Vodafone Mumbai networks

help,No network issue after complete flash

My yu yureka a05510 was stuck in bootloop automatically. To resolve the issue i downloaded Yu_Yureka_AO5510_V2_15.04.15_lollipop and flashes it with YGDP software. After setting up the device ,my network is unavailable. The sim detects on both slots but there is no network. I went to the *#*#4636#*#* and tried chaging the settings there by turning off the radio but no luck.
I even deleted the access points and setting the AP manually but still no network. I flashed modems from stock rom but i the cellular network is still not available.
Can anyone help me with this problem
Bro I will also have the same problem
How to fix this please help me bro
did you find any solution?
Did you find the solution?
1 Download this file
https://androidfilehost.com/?fid=745849072291689565
2 extract it
3 rename flash.txt into flash.bat
4 connect your phone into fastboot mode
5 open the flash.bat file, commands will run automatically
6 reboot your phone
Done
Any data lose?
Check the IMEI.
If it syas 0123456789 or some thing like that then your IMEI number gone.
You have to restore IMEI number
then only network signal connects

Categories

Resources