Hi there
I just recently flashed the latest firmware & bootloader using ODIN and then the phone just got stuck in the splash screen. I tried rebooting to recovery several times but it just doesn't work.
I can access download mode and ODIN detects the phone, but every time I try to flash TWRP or firmware it gives me an error.
Sometimes the error says "There is no PIT partition", and other times it just says "FAIL! (DeviceInfo)".
The device is useless at the moment and the only thing I can access is Download Mode to no avail.
Please help me!
forum.xda-developers.com/galaxy-s8/help/stuck-bootloop-flashing-aqg5-fix-t3636857
This might help.
robinnl192 said:
forum.xda-developers.com/galaxy-s8/help/stuck-bootloop-flashing-aqg5-fix-t3636857
This might help.
Click to expand...
Click to collapse
You're a life saver. Thank you <3
TarekElsakka said:
You're a life saver. Thank you <3
Click to expand...
Click to collapse
Your very welcome.
Related
Please someone reply soon.i put my phone into download mode so i can return to stock but now everytime i power on it show a screen of phone connected to the computer.i cant boot into recovery or anything is there a way to turn off download mode.i tried battery pull thank you very much for helping.
Do this. Just flash SPH-D700-DG27-8Gb-REL.tar in the PDA section of Odin and it will recover your phone.
http://forum.xda-developers.com/showthread.php?t=773032
pjree said:
Do this. Just flash SPH-D700-DG27-8Gb-REL.tar in the PDA section of Odin and it will recover your phone.
http://forum.xda-developers.com/showthread.php?t=773032
Click to expand...
Click to collapse
Can i flash this in recovery? odin isn't really working for me.thank you for your help i reaally appreciate it thank you
Yes. It has to be through odin.
Thanks for your help but odin just isnt cooperating with me wont work and ive tried multiple times everytime i try i do battery pull.
I was supposed to unpack the tarfile from the zip, but since my computer decided to not recognize the zip and using the rar icon I thought it was the tar itself and flashed it only to realise my mistake as Odin said the flash failed. As of right now, every time I start my device, it says "Firmware upgrade encountered and issue. Please select recovery mode in Kies & try again." and shows a picture that looks like *Phone**Triangle**Computer*.
Kies emergency recovery does not recognize the device.
Trying to start the phone in recovery mode takes me to the *Phone**Triangle**Computer*.
Download mode > Flashing a stock rom = fail (Yes, it's unpacked this time)
Any suggestions? Thanks in advance.
P.S. Now before anyone bothers to help me out here.. I know.. I'm an idiot, and anyone who takes his or her time to help out here is my hero for the rest of my life <3 D.S.
Try to flash stock firmware with a pit file search for pit file in original development section for you device model
armedking said:
Try to flash stock firmware with a pit file search for pit file in original development section for you device model
Click to expand...
Click to collapse
Is there even a pit-file for 9505 yet?
I didn't find it if there is one.
Trying to flash a stock in just a few minutes, when the download is complete. If it does not work, I'll try to find a pit.
Thanks for the reply <3
For the i9500 ther is i think dont know about i9505 try asking a dev and there is a thread here on page two I think somebody had same problem like you he fixt it changing usb poort and original usb cabel helpt him try to do that and flash stock firmware without pit file first hope you get it sort al out buddy
PixelPatrik said:
Is there even a pit-file for 9505 yet?
I didn't find it if there is one.
Trying to flash a stock in just a few minutes, when the download is complete. If it does not work, I'll try to find a pit.
Thanks for the reply <3
Click to expand...
Click to collapse
see my sig for pit file with odin :good:
Alright, so I got a lot further this time.
I figured out how to get into Download mode again, suddenly I need to press and hold the combo a little while longer than I did before, or it will go to *phone**triangle**computer*.
I got the official firmware into PDA in Odin 3.07 this time around and connected my phone to the computer after I loaded PDA.
I then pressed start and VOILA!!! Thanks fellas!
You welcome enjoy
PixelPatrik said:
I was supposed to unpack the tarfile from the zip, but since my computer decided to not recognize the zip and using the rar icon I thought it was the tar itself and flashed it only to realise my mistake as Odin said the flash failed. As of right now, every time I start my device, it says "Firmware upgrade encountered and issue. Please select recovery mode in Kies & try again." and shows a picture that looks like *Phone**Triangle**Computer*.
Kies emergency recovery does not recognize the device.
Trying to start the phone in recovery mode takes me to the *Phone**Triangle**Computer*.
Download mode > Flashing a stock rom = fail (Yes, it's unpacked this time)
Any suggestions? Thanks in advance.
P.S. Now before anyone bothers to help me out here.. I know.. I'm an idiot, and anyone who takes his or her time to help out here is my hero for the rest of my life <3 D.S.
Click to expand...
Click to collapse
yes u need the pit file while flashing
Hi all,
I have an I9505 from O2 and I was in Odin mid-flash throwing on Philz Touch when the cable got disconnected (kids) and now I'm getting an error on my phone I can't seem to undo. It's showing me a screen as soon as it begins to boot that reads "Firmware upgrade encountered an issue. Please select recovery modde in Kies and try again.". I've tried running Kies as it suggests and my computer doesn't even register the phone connecting to begin with let alone Kies noticing the connection. I've tried to go into recovery mode (vol up + power) but it just gives me the same message. Please tell me I didn't brick this thing... is there any voodoo I can do to fix this? Thanks for any help you can give.
-Izzy
d19375 said:
Hi all,
I have an I9505 from O2 and I was in Odin mid-flash throwing on Philz Touch when the cable got disconnected (kids) and now I'm getting an error on my phone I can't seem to undo. It's showing me a screen as soon as it begins to boot that reads "Firmware upgrade encountered an issue. Please select recovery modde in Kies and try again.". I've tried running Kies as it suggests and my computer doesn't even register the phone connecting to begin with let alone Kies noticing the connection. I've tried to go into recovery mode (vol up + power) but it just gives me the same message. Please tell me I didn't brick this thing... is there any voodoo I can do to fix this? Thanks for any help you can give.
-Izzy
Click to expand...
Click to collapse
pull out your battery for a minute, re-insert it, boot into download mode, reflash recovery
samersh72 said:
pull out your battery for a minute, re-insert it, boot into download mode, reflash recovery
Click to expand...
Click to collapse
I tried but no luck, the message comes up as soon as the phone receives power.
d19375 said:
I tried but no luck, the message comes up as soon as the phone receives power.
Click to expand...
Click to collapse
you meant that you can not boot in odin mode?
if you can, what odin says when flashing?
d19375 said:
I tried but no luck, the message comes up as soon as the phone receives power.
Click to expand...
Click to collapse
Can you still get in download mode? You may need to flash the whole firmware again then flash the recovery after. I've had the same problem on an s2 in the past with my son pulling the cable halfway through
Sent from my GT-I9505 using xda premium
Would a USB jig work?
You have to boot to download mode and install full firmware through Odin.
You can download your carriers firmware from Sammobile.com
Sent from my GT-I9505 using XDA Premium HD app
d19375 said:
I tried but no luck, the message comes up as soon as the phone receives power.
Click to expand...
Click to collapse
Strike that, it worked! I've been at this for hours with no luck but I guess the phone gods are now in my favour. Unfortunately when I try to flash with Odin, I get failure messages and my phone stays in the Downloading part. Any advise?
d19375 said:
Strike that, it worked! I've been at this for hours with no luck but I guess the phone gods are now in my favour. Unfortunately when I try to flash with Odin, I get failure messages and my phone stays in the Downloading part. Any advise?
Click to expand...
Click to collapse
Aslong as odin says fail or pass and you definitely do not have a progress bar on your phone after odin shows the result then you will be safe to unplug amd reboot the phone manually. If it passes on odin it usually reboots itself
Sent from my GT-I9505 using xda premium
Obagleyfreer said:
You have to boot to download mode and install full firmware through Odin.
You can download your carriers firmware from Sammobile.com
Sent from my GT-I9505 using XDA Premium HD app
Click to expand...
Click to collapse
Awesome thanks, I'll give it a shot. I'll post back with results!
Got it! Re-flashed the firmware and it's rock solid. Thanks for all the help, really appreciate it guys.
-Izzy
Big trouble here.....Tried to odin this and it Failed.
Now whenever I reboot it goes back to download mode with 'Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.'
Can everyone help? Please!
SM-N9005
Hi i have this same. please someone help us
sylwek23111 said:
Hi i have this same. please someone help us
Click to expand...
Click to collapse
Same issue!
My SGN3 is frozen in the middle of flashing this via odin. . The blue progress bar has been stopped for 15 minutes now.Odin is reading " "cache.img.ext4" and isnt progressing beyond that. Any ideas what my immediate next step should be?
UPDATE:
I pulled the plug, and get the big red "Fail" box in odin. Now my phone says "firmware upgrade encountered an issue. Please select recovery mode in kies and try again. "
I'm so screwed. Any help would be greatly appreciated at this stage.
Thanks!
Jason
jason370 said:
Same issue!
My SGN3 is frozen in the middle of flashing this via odin. . The blue progress bar has been stopped for 15 minutes now.Odin is reading " "cache.img.ext4" and isnt progressing beyond that. Any ideas what my immediate next step should be?
UPDATE:
I pulled the plug, and get the big red "Fail" box in odin. Now my phone says "firmware upgrade encountered an issue. Please select recovery mode in kies and try again. "
I'm so screwed. Any help would be greatly appreciated at this stage.
Thanks!
Jason
Click to expand...
Click to collapse
You can rerun ODIN in that mode, just try it again with another USB port/cable and turn off Kies in Task Manager.
zedomax said:
You can rerun ODIN in that mode, just try it again with another USB port/cable and turn off Kies in Task Manager.
Click to expand...
Click to collapse
I second this because I am HIGH on Android.
Try using the original USB3 cable that came with it. If you can help it don't use a USB hub either, these can cause problems (past personal experience)
Dear Friends if you have encountered the CWM issue with odin and message firmware encountered an issue please recovery mode in kies..... you have to hold the three keys again to get back to download mode but you need to reinstall the firmware with odin ....firmware available at Sammobile.com. I did'nt find any other solution but reinstalling firmware brought my device in normal condition.
Hi i tried rooting my device a few days ago with odin and it failed. When i tried to reboot it got stuck on the sprint logo. I tried reflashing the stock firmware and now when i try to access download mode it says "An error has occurred while updating the device software. Use the emergency recovery function in the smart switch pc software." I figured it would be an easy fix but the smart switch app on my pc said my device is unsupported. Odin still knows when my phone is connected but Im second guessing my abilities to do this on my own so any help would be much appreciated. Thank you.
217alex said:
Hi i tried rooting my device a few days ago with odin and it failed. When i tried to reboot it got stuck on the sprint logo. I tried reflashing the stock firmware and now when i try to access download mode it says "An error has occurred while updating the device software. Use the emergency recovery function in the smart switch pc software." I figured it would be an easy fix but the smart switch app on my pc said my device is unsupported. Odin still knows when my phone is connected but Im second guessing my abilities to do this on my own so any help would be much appreciated. Thank you.
Click to expand...
Click to collapse
flash with odin just like you would normally
odin still sees this as download mode and will flash
HoosierDaddy said:
flash with odin just like you would normally
odin still sees this as download mode and will flash
Click to expand...
Click to collapse
I did that and after i fixed some issues with connecting to google my device is now back to normal. Thank you so much for your help