Hi,
I am using an unlocked T-Mobile MDA compact II in India.The phone is running fine except for a small problem.It sends out a message almost daily(may be when i replace my SIM card) which appears of type 'application' in my phone bill.I have also used the antivirus software on my phone but didnt detect any viruses.
In other phones , you have an option for ''Confirm SIM service actions'' , where it confirms with the message "Allow SIM card to send message'' when you insert your SIM card.However, this choice is not available here.
Is there any registry entry to be modified to change this setting ? or are there any other options available ?
Pls. help .thx in advance.
Hi,
Where I work I've access to the WLAN with my LPT. The WLAN is configured with MAC address access list.
Is it possible to change the MAC Address of my P3600 to access the WLAN?
Thanks
Sbay
No absolutely not possible. You should let your mac adress added to the network.
hello, i don't see the MAC address in settings and the wi-fi doesn't turn on now.
What can i do?????
Help!
and, as i enter in bootloader, after USB i read in Red: WLAN ERROR.
what can i do??
Even if it were possible to change the MAC address, which can be done for your laptop, your employer obviously has a reason for not having the WiFi open to all who have the WEP/WPA key and circumventing this may well not be looked on favourably. Best suggestion is to register your PDA with the IT department so it works without hacking anything
yah
I do agree with deedee
Did someone find the solution to restore WLAN EEPROM?
lambda1976 said:
hello, i don't see the MAC address in settings and the wi-fi doesn't turn on now.
Click to expand...
Click to collapse
I have almost the same problem...
I have flashed WM6.5 ROM, then decided to return to native WM5.0 ROM. In bootloader there was the same error.
lambda1976 said:
in bootloader, after USB i read in Red: WLAN ERROR.
Click to expand...
Click to collapse
But my device was flashed successfully. After that Wi-Fi was dead
Reflashing does not help... Wi-Fi is as cold as a key
Hi all
Just a quick question. When you upgrade your Rom, and you go through the HardSPL procedure, does this change your devices MAC address/hardware code?
Reason I'm asking is that my GPS software uses that MAC address, which you have to register on their website and they then issue you with a activation code. Problem is, after upgrading I can get the software to work on the phone, but it does not want to accept the same activation code as before.
Any ideas?
Thanks.
i'm not sure abt this but most probably No i guess it doesnt! Maybe someone with knowledge will clear this up.
rafiqc said:
Hi all
Just a quick question. When you upgrade your Rom, and you go through the HardSPL procedure, does this change your devices MAC address/hardware code?
Reason I'm asking is that my GPS software uses that MAC address, which you have to register on their website and they then issue you with a activation code. Problem is, after upgrading I can get the software to work on the phone, but it does not want to accept the same activation code as before.
Any ideas?
Thanks.
Click to expand...
Click to collapse
have you ever formatted your PC more than once. whether if its yes or no...i can tell you i have formatted my pc several times. but the PC always carry the same MAC ID, why??? because its not related to your hard disk. my point is...the MAC ID is a unique ID for every motherboard (in simpler terms) and does not change...
so coming to your device...your device mainboard maintains a specific MAC ID and it does not change even if you have flashed your device so many times...
bottom line is...your device mainboard is a separate partition from your NAND flash....
and unless you mess arnd with the mainboard...it does not change...so flash away....
1 .restore your original partition
2 .update with official 2.3.5(some phone will be lost imei)
3 .dial *#*#2846579#*#*
4 .background settings- qualcomm background settings-open-password 0 confirm
5 .usb port settings manufactor mode , and restart the phone
6 .turn on usb debugging and connect to pc
7 .run DFS , select port db adapter (downloadfrom attached files)
8 .click on spc
9 .click on pragramming tab
10.if you lost your imei type and write imei(check attached files)
11.check your current wifi-mac address
12.and type it in the mac address box
13.write after successfull close and reopen the dfs and connect again
14.click on read button (nearly to mac address)
15.mac address will show automatically
16. now root and flash any rom wifi will work :good:
thanks for your help:good:
with this new DFS-tool{old one 3.3 cannot restore mac} i managed to restore my mac address and also the serial number!:highfive:
RajuMon said:
1 .restore your original partition
2 .update with official 2.3.5(some phone will be lost imei)
3 .dial *#*#2846579#*#*
4 .background settings- qualcomm background settings-open-password 0 confirm
5 .usb port settings manufactor mode , and restart the phone
6 .turn on usb debugging and connect to pc
7 .run DFS , select port db adapter (downloadfrom attached files)
8 .click on spc
9 .click on pragramming tab
10.if you lost your imei type and write imei(check attached files)
11.check your current wifi-mac address
12.and type it in the mac address box
13.write after successfull close and reopen the dfs and connect again
14.click on read button (nearly to mac address)
15.mac address will show automatically
16. now root and flash any rom wifi will work :good:
Click to expand...
Click to collapse
Didn't work for me. Actually there is no field for mac address change. Please help me...
check
avi062 said:
Didn't work for me. Actually there is no field for mac address change. Please help me...
Click to expand...
Click to collapse
can you connect the phone to dfs tool
Not working with ICS AuroraSP
There is no background setting in ICS AuroraSP.
So after dialing *#*#2846579#*#* nothing happens.
its only on official GB .update your Phone with official update
download link here(http://consumer.huawei.com/en/support/products/downloads/detail/u8800-en.htm?id=13396)
Sorry but this cdma tool is 3.1 and there is no mac adress field... can you send me the 3.3 or somehting?
nick#18 said:
Sorry but this cdma tool is 3.1 and there is no mac adress field... can you send me the 3.3 or somehting?
Click to expand...
Click to collapse
I have to confirm: the attached file brings a tool 3.1 - no MAC option for my device...
android_paul said:
I have to confirm: the attached file brings a tool 3.1 - no MAC option for my device...
Click to expand...
Click to collapse
The demo version from here should do the trick too (worked on U8860).
http://cdmatool.com/download
Blefish said:
The demo version from here should do the trick too (worked on U8860).
http://cdmatool.com/download
Click to expand...
Click to collapse
Hi
Tried both DFS.exe and DFS demo. I can see the updated IMEI on the device but the phone still doesn't show updated wifi
any suggestions
Thanks for helping on the IMEI part
mohammad.nomaan said:
Hi
Tried both DFS.exe and DFS demo. I can see the updated IMEI on the device but the phone still doesn't show updated wifi
any suggestions
Thanks for helping on the IMEI part
Click to expand...
Click to collapse
Try switching the OTP NV filters on/off etc. I had similar issue on U8860 and somehow I was able to write all the info back eventually. I don't remember what I specifically changed though. Great to know IMEI is back though!
Blefish said:
Try switching the OTP NV filters on/off etc. I had similar issue on U8860 and somehow I was able to write all the info back eventually. I don't remember what I specifically changed though. Great to know IMEI is back though!
Click to expand...
Click to collapse
Thanks Blefish,
The IMEI is back as I wanted
I tried that option as well. As you can see on the screenshot, I see the WiFi keys in the application as before but the same does not show on my device.
Tried both OTP NV Enable & Disable but still the same result.
If you recommend, ill flash the official update again if that can bring back the wifi keys or else ill leave it as it coz your Ideos Setting app does have that option and you I hope we will have it in CM12 as well
EDIT
DFS Demo helped in ficing WiFi keys. NV option helps as Blefish pointed out
Now all if fine - IMEI & WIFI
thanks a lot for your help and assistance
Blefish said:
Try switching the OTP NV filters on/off etc. I had similar issue on U8860 and somehow I was able to write all the info back eventually. I don't remember what I specifically changed though. Great to know IMEI is back though!
Click to expand...
Click to collapse
Hi Blefish, I would like to know if your SN is correct (in settings) after using DFS.
On my Honor I have everyting OK only when I restore it via 5iromtoolbox, but I cant flash any rom except B939 after that :crying:
I wonder if you have SN the same as MAC in settings, too
JekaPinsk said:
Hi Blefish, I would like to know if your SN is correct (in settings) after using DFS.
On my Honor I have everyting OK only when I restore it via 5iromtoolbox, but I cant flash any rom except B939 after that :crying:
I wonder if you have SN the same as MAC in settings, too
Click to expand...
Click to collapse
In my U8800 everything is ok, however, U8860 had zero imei and zero BT/MAC address (which was set to a random one). The serial number shown in the projectmenu tool (Huawei firmware stock) shows correct serial number (the 16 digit one, same as on the phone behind the battery).
In U8800pro/U8860 ICS release, Huawei is using the Settings->Status serial number same as MAC address. If the serial number shows unknown, MAC addresses are incorrect too.
Blefish said:
In U8800pro/U8860 ICS release, Huawei is using the Settings->Status serial number same as MAC address. If the serial number shows unknown, MAC addresses are incorrect too.
Click to expand...
Click to collapse
On B919 my MAC was ok bun SN was unknown
JekaPinsk said:
On B919 my MAC was ok bun SN was unknown
Click to expand...
Click to collapse
BT MAC aswell? I don't remember which one it used.
Blefish said:
BT MAC aswell? I don't remember which one it used.
Click to expand...
Click to collapse
Yes. Until I made changes to BT MAC it showed nothing, but now I have it working.
PS: Why new branches?
JekaPinsk said:
Yes. Until I made changes to BT MAC it showed nothing, but now I have it working.
PS: Why new branches?
Click to expand...
Click to collapse
For TWRP (and maybe more) .
Hello guys,
my U8800-51 is on the latest LegacyHuawei CyanogenMod 11.0 by Mr Blefish but i ended up without no WIFI MAC and BLuetooth. So i tried as stated on this post to downgrade to android 2.3 but when it gets to part 2/2 of the installation, gives me an error... Then, i proceeded to use DFS v14 to try to write the MAC adress (still on CyanogenMod) but it failed to find the COM PORT through PC (ADB install correct and showing the device, USB debuggin enable). The only way i managed to see the port in the device manager and DFS is tu putting the phone on the PINK SCREEN (Download mode, right?). but, DFS throw me some errors like CPS_BPSR and so on.
I also tried enabling DIAG port through ADB but didn't work.
So far, it has failed... But maybe you can help me.
I understand this is a very old phone, but i live in a 3rd world country where phones are ver expensive (not to mention an Hyperinflation process that we are living through). So, i have to try everything to save it.
Thanks in advance for you help
Regards
I have a problem with my cell phone ... I just did a software update from 9.0 to 10, but downloading sammobile and suddenly I can not access my mobile networks, I can not make calls because I get an "unregistered" message in the network ", the cell phone does not recognize any type of sim card ... I need your help please