Related
Yesterday, I impulsively rooted my phone (my first time), successfully did it after several tries and installed jf 1.5. When everything was done and fully functional, I noticed some resistance when closing the keyboard. I tried closing it several times trying to investigate the cause.. until my screen just went black suddenly, w/ the resistance in closing it getting stronger! What I discovered was that the brown tape inside the screen, bottom part, ( the one you can only see w/ keyboard open) was caught in the hinge ripping it partially out of place. I dont have any idea what is the main finction of that tape/ ribbon but I believe it has something to do w/ the lcd. I ended up w/ a dead phone, won't power up anymore. i called the customer service but they don't have any idea what i'm talking about and suggested me to go to the nearest Tmobile store. I did and to my disappointment, nobody in the store also knows anything about G1, even though I'm pointing out to them the tape that was caught by the hinge! I called customer service and they seem not to understand about that hinge part of G1. Anyway, they will send a replacement in 3 days and I hope they wont discover that I rooted the phone. Well, it won't power up anymore and besides the problem is on the hardware and not on the software I installed.
I came across the same problem posted in one of the forums,a long time ago, coupled w/ some pictures I tried searching it again to no avail.
Anybody here have the same problem w/ G1? I do believe that HTC and Tmobile should be aware of this hardware flaw and do something about it. I love my G1, w/ its physical keyboard. But if all my G1 will end up this way, I may have to find a better phone.
Yep... had the same thing happen to me. Brought it into the store (30 days or less) and got a new one. If your's is older, it should still be under warranty. Contact T-Mobile and they should send you out a new phone.
That ribbon has several conductive traces in it. Basically, its a bunch of wires, and you moosed it out. I would say that it was your fault for forcing it when you should have investigated the problem BEFORE ripping it out.
Sounds like your screen just doesnt turn on, not that its bricked.
Thats the ribbon that connects the lcd and backlight to the ui module. It can be fixed most likely if you're not afraid to take it apart. What prob happened is the ribbon got bent up a bit, and one of the 2 connections for it got pulled out.
I disassembled one of my G1's completely, and there is a very specific way that ribbon has to fit into the hinge. Its not all that difficult, but you have to be very gentle and patient to get it back to where it needs to be.
You should go to the Dev forum, and do a search for G1 repair manual. You'll see what i mean. Feel free to PM me if you have any questions about it, although Im not an expert, just a tinkerer.
@lbcoder: you dont have to "investigate" anything, its made the way it should work, all he did is open and close screen, thats called a manufacturer defect, and falls under warranty.
@tr.slate: you are right, however that's exactly what OP put in his post. Nothing bout phone being bricked, but hardware flaw.
@jdc2006: yes, G1`s construction is not the most durable, as we can read around this forum, even i had squeking (or however oyu spell that word) but im guessing that it`s the price we pay for something new as this (though i would expect a bit more from HTC) but i dont think that all will have that problem. though Im on my second G1, first one got nasty case of stuck pixelitis.
now excuse me, i have to dispose a body from the trap.
G`nite.
This is going to be my 4th G1 and I hope the last..
The 1st one- brand new; has dead pixels- returned/replaced
The 2nd one, obviously a refurbished item, keyboard imperfectly fitted; home/call buttons replaced w/ cheap looking plastic, not the marble-like.
This 3rd one- almost perfect but ribbon/hinge flaw.
Good thing is I still have my old HTC Touch
tr.slate.. tnx, I like to tinker too but this beyond my capabilities.
I never had any problems with Tmobile fixing mine...When I first got mine in February 09 the ribbon stuck out a bit....they told me come back in 2 hours, i came back and they had it fixed, as others have said, it really needs to be in the right spot or something bad could happen to it...Its a cell phone, not much space to use.
WHen I first got the Slide it was awesome! The pictures it took looked great... but now my phone won't auto focus right... there is no manual focus... now it just takes awesome blurry out of focus pictures!
Is this happening to anyone elses phone? From the looks of the intertubez this will become a "known" issue with TMO
Are there any files the camera accesses for settings or the like that may be damaged? I have tried other ROMS and they all seem to have the same problem....
yup, happened to me too, i just got a warranty replacement and it's clear again. you have to call and get a new phone.
My camara was blurry the other day and I noticed it had condensation under the lens. It ended up drying out but the pics still arent as clear as they have been. Weird.
Sent from ROOTED MyTouch Slide
yea this same thing happened to mine and i just called them and got a replacement. i even tried resetting my phone before i sent it in and that didnt fix the problem so idk what causes it. Hopefully it doesnt happen again with my new one.
It started happening after this rave I played at.... the humidity inside was probably 100%
Yes, this happened to me as well. It would only focus on things literally about an inch from the lens. When wiping didnt fix the problem, T-mobile sent me a new Slide.
Blurry Cam
I just bought the MTslide about a week ago on craigslist and I too have the blurry focus issue, ive cleaned it, messed with settings all to no success. It only takes clear pictures if the object is an inch away. I of course do not have insurance cuz I bought on craigslist, is there anything I can do I'm desperate? I love this phone it's amazing but I dont want to have to go back to my CliqXT because of the camera (especially since its still on 1.5 till Motorola's "fairytale" update which they keep pushing aside)
------------------------
Black MyTouch Slide
Rooted w/ 16GB microSD
Motorola CliqXT
non-Rooted w/ 4GB microSD
So I just got my new Slide and it still has 2e
What is the best program to use to backup all the programs and crap before I unroot this one and send it back...
Yep.... Same deal with mine. Sending it into HTC for repair. It is stuck in Macro focus... Go up to something close and it will be fine.
Fine if you only want to take macro photos..... otherwise useless!
Sent from my T-Mobile myTouch 3G Slide using XDA App
I had the same problem with out of focus but it came down to condensation. I live in Florida and it has been hot and it is the same over the US right now. Everyone is using AC but going from cool and low humidity to hot and very high humidity well you build up condensation. I left my phone in the sun for about 45 minutes and then took some pics and it worked fine A few days later it was back to being blurry and tried the same thing. If I leave the phone in the house without going outside and take pics it is fine as well. Just going from on extreme to another it takes its toll. I do photopgraphy and when I go out to do a shoot I leave my camera in the trunk of my car to get rid of the condensation on the lens and mirros inside the camera.
I think i figured the problem out why everyone camera goes blurry.
I have the mytouch slide and the pictures were perfect and crystal clear. Then when the firmware 2.1 update came, that messed up the camera big time and made it barely unusable.
Please fix the issue!!!!
I just had mine replaced via warranty exchange. Just call, tell them you're having trouble, there's nothing on the lens, the water damage indicator is white, and it's still not working. You'll get a new one and if you don't have insurance they'll charge you ten bucks to deliver it to you.
I actually don't think it has anything to do with condensation or heat or humidity. Yes, all of those things can affect ANY lens on ANY phone, and the update may have even adversely affected certain handsets but this is a handset by handset issue. My father's mytouch slide got the update and still works better than my old camera did. It's a hardware problem with a certain batch of these phones. My wife's is still fine and she got it early on like me. The lens tries to focus and snaps back to its original position. It's a defect. You can play with the settings all you want, but other than minor adjustments and a lot of placebo effect, you're not gonna fix it.
tinpanalley said:
I just had mine replaced via warranty exchange. Just call, tell them you're having trouble, there's nothing on the lens, the water damage indicator is white, and it's still not working. You'll get a new one and if you don't have insurance they'll charge you ten bucks to deliver it to you.
I actually don't think it has anything to do with condensation or heat or humidity. Yes, all of those things can affect ANY lens on ANY phone, and the update may have even adversely affected certain handsets but this is a handset by handset issue. My father's mytouch slide got the update and still works better than my old camera did. It's a hardware problem with a certain batch of these phones. My wife's is still fine and she got it early on like me. The lens tries to focus and snaps back to its original position. It's a defect. You can play with the settings all you want, but other than minor adjustments and a lot of placebo effect, you're not gonna fix it.
Click to expand...
Click to collapse
I hear you. But i just got this two weeks ago in the store and the camera was perfect till after the update. I would hate to get a replacement for a silly camera. So debating to not care and keep the phone or just risk it and get a Warranty one
You have nothing to lose by getting a new one via warranty exchange. You don't even have to be without your phone. It comes to you in the mail, you backup your contacts, you hard reset the old one, you're done.
The camera won't get better, it will not improve, you'll have the new phone before you know it. And the slide is relatively new which means the longer you wait, the higher the likelihood that you get a manufacturer refurb. instead of the new one I got 2 days ago.
Just do it. Someone in your life will do something, you'll want the silly camera, and you'll go, "damn, I shoulda listened to that dude on the forum".
tinpanalley said:
You have nothing to lose by getting a new one via warranty exchange. You don't even have to be without your phone. It comes to you in the mail, you backup your contacts, you hard reset the old one, you're done.
The camera won't get better, it will not improve, you'll have the new phone before you know it. And the slide is relatively new which means the longer you wait, the higher the likelihood that you get a manufacturer refurb. instead of the new one I got 2 days ago.
Just do it. Someone in your life will do something, you'll want the silly camera, and you'll go, "damn, I shoulda listened to that dude on the forum".
Click to expand...
Click to collapse
Hahhahahahahaha
Thanks bro
snuggpugg said:
I just bought the MTslide about a week ago on craigslist and I too have the blurry focus issue, ive cleaned it, messed with settings all to no success. It only takes clear pictures if the object is an inch away. I of course do not have insurance cuz I bought on craigslist, is there anything I can do I'm desperate? I love this phone it's amazing but I dont want to have to go back to my CliqXT because of the camera (especially since its still on 1.5 till Motorola's "fairytale" update which they keep pushing aside)
------------------------
Black MyTouch Slide
Rooted w/ 16GB microSD
Motorola CliqXT
non-Rooted w/ 4GB microSD
Click to expand...
Click to collapse
I'm practically in the same boat. I called a few repair places up here in Seattle and since it's such a new phone, none of them were able to order parts. Does anyone know if HTC will repair it. Or even repair it if it's rooted?
I just had this problem with my wife's slide and having read similar threads on different forums including tmobile's, I called customer care and lied a little about doing all kinds of things to make sure it's hardware, like doing a factory reset. Never mention that it's rooted! Just play dumb and they'll send you a new phone under warranty. We got the new one yesterday and I rooted it while my wife was still at work, following the new root method as it came with the 1.35.x update.and flashed chiefz 1.35.x rooted ROM (she likes espresso). When she came home I took the old phone and installed the 1.27.x esprimg.img and then flashed the 1.35.x OTA (non root). Put it in the return box and gonna drop it at a UPS drop box today.
It sounds like a lot of steps, but it goes relatively quick.
Sent from my CM6 Slide
i'm currently experiencing the camera issue as well as my wifi not working (running CM6) ...it simply cannot see any networks. I tried even loading the latest nightly build to no avail. As my phone has a slight crack on one of the buttons I'm going to try and get a refurb and then possibly sell it for a G2
I'll reply how it goes
I honestly do not notice the blurry pictures issue that you guys are having. The pictures are awesome in light but gets a little grainy in low light conditions, other than that my pictures and videos are great. Are you guys complaining about low light pictures?
sent from Mytouch Slide 3g using XDA App
www.GoTeamFriday.com
hi all,
i have been using my z for about a month now and i am now officially unhappy with it. the z hinge is not really an issue, i like the way it easily opens and closes without any snapping movement or stress in the mechanism. my concerns would be when i open it and use the keyboard, my phone squeaks a lot. i think the battery cover is the culprit. now my latest problem is that there are a lot of dust particles accumulating under the screen. i had 5 htc phones and this never happened before. it happened with my nokia's and se's, but never with my htc. so im disappointed with it. im very oc when it comes to my phone and i make sure that i clean my pockets from dust and lint to ensure its clean and dust free.
feel free to share your opinions.
thanks!
Use a screen protector to stop the dust. If you think the back cover is bad you can buy a new one, or remove it and use a slim case.
I think if you that unsatisfied with the quality you should have returned it for a new a long time ago. Let me assure you that none of the bad points you mentioned has plagued my G2. I recommend you call customer service and huff and puff until they exchange it.
adrienspawn said:
Use a screen protector to stop the dust. If you think the back cover is bad you can buy a new one, or remove it and use a slim case.
Click to expand...
Click to collapse
i am using a protector and the dust is under the screen.
ddgarcia05 said:
I think if you that unsatisfied with the quality you should have returned it for a new a long time ago. Let me assure you that none of the bad points you mentioned has plagued my G2. I recommend you call customer service and huff and puff until they exchange it.
Click to expand...
Click to collapse
i dont think they will do that. i actually chose this because this is the best and had it replaced already. no dead [ixels etc just dust getting under the screen
If you think the squeek is coming from the battery cover try putting on a hardcover and see if that helps? Also, I completely understnad how the squeekeness would be annoying.. I returned a Cliq because of it.
Customer care should replace the phone if u have build quality issues. I would def give them a call. I had issues with my prior phone the cliq which was replaced 5 times by calling as well as tweeting tmobile my issue. I had my G2 replaced twice due to the build quality issues. Should be no reason they wouldn't the phone still carries a warranty.
userfriendlyme said:
Customer care should replace the phone if u have build quality issues. I would def give them a call. I had issues with my prior phone the cliq which was replaced 5 times by calling as well as tweeting tmobile my issue. I had my G2 replaced twice due to the build quality issues. Should be no reason they wouldn't the phone still carries a warranty.
Click to expand...
Click to collapse
+1
I had my cliq replaced 3 times (it just wouldn't get reception).
If you do have problems with the build quality, then have it replaced. What you're experiencing is not normal.
Absolutely, if you're within 1 year, call them up and have them replace it under warranty. I am also not having any of those issues, so it might just be your specific unit. There's absolutely no reason to keep a phone that sucks.
thanks for the support. i dont think that htc will really do anything about it where i stay. but might as well give it a try. i checked again last night if it was just me, but there are MORE dusts now than before. tsk tsk
I haven't seen this with any mobile other than one that had a manufacturing defect. I certainly haven't seen this with any HTC devices either (and I'm no fanboy, this is my first HTC device).
Contact the OEM or your wireless provider. I've never used any protection for any of my mobile phones in the past decade and haven't had so much as a spec of dust under my screen. I had a single spec of dust in my PSP though and it drove me insane (it was shipped with the dust but I didn't have a receipt). Good luck!
thanks all!
i will be visiting their customer care sometime this week. have to absent myself due to work though. hope they can sort it out before the year ends. holidays are creeping and they are closed during this period as well.
>update
just sent it to the service center, they will be replacing the entire screen with the panel. the technician said it was like someone placed their finger under the screen. hopefully everything will be ok and no mishaps when i get it back on the 29th. another screen protector down the drain.
The phone has been out for most of us just little over a month and there have been many reports about front/rear glass cracking, so now I made this poll to see how many people actually have/had problems with their device.
Please note that this poll is only about hardware problems, so don't vote yes if you only had software related problems, thank you.
To be clear:
Vote yes: If you had glass cracking (with/without) a reason, flaps not closing properly, phone not being waterproof, etc
Vote no: If you had no problems, software related problems
Bump!
Don't forget to vote!
I voted yes due to a way too sensitive touchscreen - putting a screenprotector on however solves the problem, but I take it that it is the out of the box product we have to vote about...
(To the - right now 13 persons - who have voted no - does this also mean that you don't have the popping issue when pressing the screen? Or is this looked at as a feature...? https://www.youtube.com/watch?v=9JrfMjiNB9E)
Nope. I've had nothing wrong with the phone, no "popping", no "glass breaking" even though I accidentally did drop it today.
Nothing. I'm convinced most of you are playing baseball with your phones, or just being extremely picky.
Not any problem at all. This phone lives up to its expectations but i also keep it protected with case though.
i had the phone for 3 weeks. i bought a magnetic charger and was using that. last week i went to take the charger off the phone and the whole magnetic charging "module" came out of the phone with the charger. it's currently back at sony for repair - i'm really hoping they just send me a new one though. that was a fun discovery. anyway, no problems with glass or anything like that in the time i had it, though.
Not a single problem so far.
Btw, good initiative!
However, I think that since only people with glass issues post that on the forum, it's not surprising that it looks as if it's a major problem.
charliebigpot said:
Not a single problem so far.
Btw, good initiative!
However, I think that since only people with glass issues post that on the forum, it's not surprising that it looks as if it's a major problem.
Click to expand...
Click to collapse
Yeah, that's the main reason why I made this poll, due to so 'many' people reporting issues with their phones it might scare people off that intend to buy the phone.
Sent from my C6603
Hmmm could there be a connection between the popping screens and the very sensitive screens? Mine has the popping and also a screen that sometimes during internet scrolling has a life of its own speedscrolling up to the top of homepages when lifting the finger from the screen - an issue I have never ever had before on any of my many previus phones...???
mohlsen8 said:
i had the phone for 3 weeks. i bought a magnetic charger and was using that. last week i went to take the charger off the phone and the whole magnetic charging "module" came out of the phone with the charger. it's currently back at sony for repair - i'm really hoping they just send me a new one though. that was a fun discovery. anyway, no problems with glass or anything like that in the time i had it, though.
Click to expand...
Click to collapse
And most people complain the magnet is not strong enough! :laugh: Did you take photos?!
Yep:
http://forum.xda-developers.com/z3-compact/help/handtec-returns-t2919883
And bump.
I would assume that more then 42 people have this phone on this forum.
The plastic frame is so weak, i drop once and inside the frame its cracked . After that i use a case then dropped again this time between part of the plastic frame n front glass a piece of part came out. Rest is very good. No prob at all.
Sent from my D5803 using XDA Free mobile app
hello,
"Z3 Compact" bought the 28.09.2014. The phone is turned off itself in the middle of the day in my pocket. The battery level was approx. 75% => Black screen, not even light on the charger...:S
The Sony support told me to send them with charger and usb cable.
I am waiting for news... approx. 10 days...
NO issues so far... put a tempered glass screen protector on the phone pretty soon after buying it, but I never saw any screen popping or "life of its own" syndrom while I had the screen unprotected.
no issues so far , i had some bad experience with singapore firmware , but its all good now (using latest brazil firmware).
i did drop it a week ago , tempered glass cracked abit , phone also got abit of a spank on the top right corner, still water proof.
all good just no ****ing root
Sudden Death after two weeks.
Had this awesome phone since October 3rd. All fine and dandy till now, the vibration would work sometimes. It comes and goes but it's no biggie, I can live with it!
Gyroscope defect
Yes.
I had the phone for only 3 days and the phone suddenly stop rotating. I did a factory restore and even trying running the system test. Compass test tells me function is not available. Sony says it might be a hardware issue so I had to send it to Sony to get it fixed.
My mic has become strange. People say that I sound like I'm a mila away from it.
Who here has sent in their phone to LG or have had to exchange their phone due to build quality issues? I am expecting mine back from LG soon. I had GPS issues, charging port issues, and the paint finish was bubbling along the bottom module.
So, here are a few things I feel are important things to look at when receiving your device. If you have sent in your phone and received it already could you share some info based off these questions?
What differences do you notice build quality wise?
Any HW differences?
How does the phone's battery life differ from before?
Did they repair the specific issue or does the device appear to have been replaced entirely?
Turn around time?
Some manufacturers have specific markers on serial numbers that indicate when they were manufactured which makes it pretty easy to figure out when it was made. I am gonna compare mine and see if I can find a difference, if there is something like that could you provide the small info needed to figure it out?
Here is what my device looks like after receiving it back from LG. Luckily(unlucky) they didn't actually fix the original issues I had and sent it back. I don't have a picture of the yellowing LCD yet. The reflective finish kind of makes the bubbling hard to see, but in person its pretty noticable.
I just replaced my G5 through AT&T, and it seems to be fine so far. My old G5 had camera issues after the last software update, it also had some screen burn in already. The "new" G5 seems to have similar battery life, and it took the update with no issues. I didn't have build issues with the old G5 and the new one seems even better built. I am.satisfied so far.
I had to send mine off for repair as the OIS was broken.
They decided to replace it as it was going to take longer than 7 days to fix it.. Funny thing is it took them more than 7 days to get a new one to me as they had no stock! I gave it to O2 on Monday 5th September, I just got the replacement this afternoon.
What differences do you notice build quality wise?
Better. The chin fits better on this replacement.
Any HW differences?
Not that I have noticed
How does the phone's battery life differ from before?
Not had it long enough to say
Did they repair the specific issue or does the device appear to have been replaced entirely?
Replaced
Turn around time?
9 Days
Some manufacturers have specific markers on serial numbers that indicate when they were manufactured which makes it pretty easy to figure out when it was made. I am gonna compare mine and see if I can find a difference, if there is something like that could you provide the small info needed to figure it out?
I cant find any numbers or marks that indicate manufacture date. Maybe Its in software?
[/QUOTE]
Mine, purchased at bestbuy, att, (2 months old) wifi and bluetooth stopped working. sent in to LG. came back with work order stating "gps test fail" Solution "update software"
Same phone came back with couple nicks in same places as before. i thought maybe they would send a new one or fix the parts chipped, but nooooooo. Thanks for NOTHING.
SOLD THE PHONE after i made sure it worked correctly.
Went with wife to att and got a new G5 for free when i finally talked her onto switching off samsungs boat
So far new phones are great. ill report back if this changes
My g5 had gps issues, sent it to LG for warranty repair. The phone returned scratched and couldnt detect sim card. I returned it to repair, they replaced screen because light leak, the back cover, and fixed the sim tray... LG in israel has a policy of not giving new devices , only do warranty repairs. At least its been 2 month and everything ok.
I have olso to mention that in israel LG has repair service that the repair guy will come to your house to fix your phone for free..
I just received my phone. They did not fix the issues I had sent it in for.
EDIT:
Sim tray ejection hole looks like they just shoved a big paper clip in there and damaged the hole, and my battery eject button now feels funny. The LCD is yellowing along the top right as well... This is seriously ****ty. I will upload pictures soon.
Pics are up. So disappointed with LG right now.
You sent your phone in service via courier service? Have you tried to take your "repaired" phone in an LG service center and try to have it replaced? I have never sent my previous phones in service with a courier so i have no experience with this situation but those few times I took my phone to service center for a repair, after it was fixed, i carefully check it for bad handling before taking it back. Was there no way you could refuse the "repaired" device on the "bad handling" reason?
Here in the US LG requires cell phone warranty repairs to be shipped in. We can't open packages to check if the decice is okay or not either because we have to accept them first. Don't get me started on calling in customer support... Luckily they have a web portal to generate ship in warranty requests and they give you a label.
The G5 is back in LG's hands for a second time. Hopefully they right the wrongs here...
~~Tito~~ said:
The G5 is back in LG's hands for a second time. Hopefully they right the wrongs here...
Click to expand...
Click to collapse
Hopefully,semms like you've been through hell with it.
Surprise surprise it came back with the same issues. I've attached a more recent shot of the bubbling. My phone now has minor scuff marks on the back of the frame too. Sim tray hole looks like trash. The LCD does not yellow anymore, but the physical issues remain.
Edit: I am just going to buy the rear frame. I am wasting too much time with this crap. One thing is for certain, I can never count on LG having good build quality ever again.
Looks like my G5 is debloated. That's the one good thing I got out of this ordeal lol.
Edit: Build version screenshot uploaded. It also does not boot with the sprint logo. It looks and runs like an unlocked device. Once I get the new housing I guess this will be fine. GPS seems to be fixed, LCD looks normal.
EDIT2: The bloatware loads upon activation... GREAT. lol
Anybody got a trouble with the speaker mine start to glitch at ihigh level this morning. My g5 is 2 month old...
Polaf69 said:
Anybody got a trouble with the speaker mine start to glitch at ihigh level this morning. My g5 is 2 month old...
Click to expand...
Click to collapse
Waranty or remove the cloth cover inside the chin
Had my phone sent 4 times to LG to fix because burning screen, after 4 times I got my phone e with same problem bad signal reception and my screen keep shadowing ... I just gave up and they didn't don't replace the device me... I'm trying check with them for the last time. If they didn't fix it then this is my last LG phone. By the way I used to have LG G3 and had the black screen issue too
TheMadScientist420 said:
Waranty or remove the cloth cover inside the chin
Click to expand...
Click to collapse
Do you have a picture of what cloth cover do you remove i dont see what you talking about
Polaf69 said:
Do you have a picture of what cloth cover do you remove i dont see what you talking about
Click to expand...
Click to collapse
I dont i didnt take one when i did mine. Its down on the 3 holes on the chin where the speaker is. Its a protective cover
TheMadScientist420 said:
I dont i didnt take one when i did mine. Its down on the 3 holes on the chin where the speaker is. Its a protective cover
Click to expand...
Click to collapse
You remove that by the hole or?