Fm radio was stuttering on 6.0 stock rom, so I unlocked bootloader and tried CM: same thing.
Radio takes a lot of time to start then works fine but everytime the screen wake, radio stops and restarts after 20 sec.
Anybody has a fix? Pretty sure it's a radio firmware problem but now that I unlocked and installed CM I'm not getting OTA
Related
Since I HSPL and started flashing my phone will get muted automatically after making 1 call ie on my second call the other party will not be able to hear me whereas I am still able to hear the other party. However when I received calls there is no such problem ie.the other party is able to hear me and the phone is performing normally. It only happens when I make the 2nd call onwards.
After soft resets or reflash to other roms or stock rom 1.66.707.1 the same thing recur.
I have to overcome it when I make the 2nd and subsequent calls by pressing the mute icon twice. I do not have this problem with the original rom 148. when I bought the phone
Any assistance from anyone to overcome this problem will be very much appreciated
Might be a radio issue. Which one are you running now?
mazzarin said:
Might be a radio issue. Which one are you running now?
Click to expand...
Click to collapse
My original stock rom 148. with the original radio the phone had no problem.
I started having this problem with radio rom 2.06.51.07
I shall take your advise and maybe flash the radio to radio rom 2.07.50.27_2 and then see as to whether the problem still remain or is overcome..Thank You for your advise
After flashing to radio 2.07.50.27.2 it is still the same situation ie the same problem with the phone as mentioneded above
still the same auto mute issue
Recently I flashed to Miri V3.2 Build 5.2.23529 with radio 2.07.50.27_2 and the same proble existed.
I had hard reset and still had the same problem.
Any idea anyone to overcome this problem would be much appreciated....thanks
Not Rom issue
Recently I flashed Miri V7 and after flashing no issue.
However upon restoring through spb rom upgrade rstore( unticking overwriting files) the same issue recurs again. other than this issue which is personal only to me Miri rom V7 is smooth fast and snappy.
Found the solution to muting problem
Initially I thought is the radio problem
Then I thought it is the software programs problem
Next I thought it is due to the custom rom.
Finally I found the problem is due to "activating the auto recording phone" in resco audio recorder V4.62.
Deactivate it and the MUTE problem is gone
Hi All
I've installed HSPL3 and no problems, and when I do install a ROM it seems to work but so far experience issues such as
- random reboots and then its stuck in the 'stick together' screen. I have to take out the battery and wait a while before I it boots properly. Even when i installed an app and reboot..its always stuck and I have to keep taking out the battery.
- above seems to appear as a heat problem. anybody experience anything like that?
- I have 2.10.50.26 radio and I'm having extreme difficulty flashing another radio. It all just keeps failing at 99%....then the 50.26 seems to work after a couple tries and I'm able to boot back into the ROM but again still with the issues above. I just can't seem to install another radio to rule out if .26 causing the issues for me
Anybody having any of these issues
ROM: Elegancia v9.5 (Base ROM v2.13.531)
Radio: v2.10.50.26
try to reflash the rom, or a different rom
yojb said:
Hi All
I've installed HSPL3 and no problems, and when I do install a ROM it seems to work but so far experience issues such as
- random reboots and then its stuck in the 'stick together' screen. I have to take out the battery and wait a while before I it boots properly. Even when i installed an app and reboot..its always stuck and I have to keep taking out the battery.
- above seems to appear as a heat problem. anybody experience anything like that?
- I have 2.10.50.26 radio and I'm having extreme difficulty flashing another radio. It all just keeps failing at 99%....then the 50.26 seems to work after a couple tries and I'm able to boot back into the ROM but again still with the issues above. I just can't seem to install another radio to rule out if .26 causing the issues for me
Anybody having any of these issues
ROM: Elegancia v9.5 (Base ROM v2.13.531)
Radio: v2.10.50.26
Click to expand...
Click to collapse
Also you may try posting this in the actual ROM thread, either the TMO version or in the Main thread under the LEO forum ....
I've flashed my HD2 and it just crashes when it receives or makes a call, you cannot hear the other person at all, its just silent... I need to pull the battery out or use the reset button to reset it.
I flashed using the Energy ROM 23138 and also tried 21916 but both crash.
Could it be something to do with the radio? I can send and receive SMS's fine... I tried flashing using the 2.07.50 radio but all it seemed to do was hard reset the ROM.
The phone was a Telstra branded phone bought out right, I'm not with Telstra, I'm with 3 if this makes a difference..
Any help is appreciated, its very frustrating having a phone that can't be used as a phone.
Just thought I'd update;
It was the radio, I found that in the software info the radio was still the wrong version even after I tried updating it..
Flashed it a 2nd time and it worked, no more crashes and all is fixed.
Hi,
I'm having some big problems with the GPS in the Nexus S. It seems like it works for a while after a reboot, and then dies. In GPS Status, it seems like it finds 6-7 satellites, but that it does not get any fix. I have used GPS Status to download new GPS Assistance data, but it does not seem to do any difference. After a reboot, it gets a lock in about 20 seconds. But then the next time I want to use it, usually the next day or similar, it does not work again.
Anyone have similar problems?
I have exactly the same problem since 2.3.3 (stock rom / kernel, rooted), the gps works fine after a reboot, but after some time it can't get a fix. What is your baseband version ? After installing 2.3.3 (build GRI40), I flashed the baseband from GRI54 (I9020XXKB3), but I don't remember if I used the gps before changing the baseband or not. Could be related ?
Everything stock
Android version 2.3.3, Baseband I9020XXKB1, Build number GRI40
After flashing a few roms I have noticed sound has stopped working, at first youtube videos wouldn't load up or start to play and on first device boot all gapps installed would be in notification bar with an error installing. This is on both cm 10.2 and even the original stock 4.3 touchwiz rom, have I broken my device for good?I never had this issue before when I went back to touchwiz, I have the android 4.3 with knox installed currently....Thanks
Similar Problem!
Hi, I'm having similar problems I have no sound at all coming from the device, I've read every thread that seas sound on the heading for I9505 and for many people flashing I9505XXUDMH8_I9505OXXDMHA_I9505XXUDMH8_HOME.tar resolved the problem but not in my case.
Last night I tried flashing I9505XXUEMI8_I9505OXAEMI8_I9505XXUEMI8 and after I changed the kernel I got some sound when turning the volume up and down but the phone was running very slow.
Today I tried flashing Omega rom v15 flashing the right modem for the new bootloader before flashing the zip and no sound, I tried changing the kernel, still nothing.
So now I'm in build number XXUEMJ9 and baseband MJ5.
There has to be a solution for this as it is a software issue!!
PD: I can't get any signal either, WiFi is working though.