This modem is very different from the others. It's kind of interface ethernet-usb or something.
It is not possible or necessary to make the switch to modem only from Hyperterminal or puTTY.
Prerequisites:
1 - ROOT
2 - Modem with unbranded firmware.
To this must go to calcode.webs.com, or https://www.facebook.com/Calcodewebcom, with your IMEI can get the NCK and FLASH CODE CODE for Huawei modems IMEI number 85/86. Since it is the only calculator free to do so. The DC-Unlocker balance no longer free to do so, if you can accomplish for pay.
If you know the IMEI of the modem there are several ways to find out, the easiest is with the DC-Unlocker
Then lower the firmware of this website
http://www.unlockmodemfree.biz/2013/01/upgrade-huawei-e303-firmware-to.html
and flashed from a PC with WINDOWS (they will ask the flash code, there enter the flash code obtained from calcode.webs.com).
If your modem is lock then use the Card Lock Unlock Tool program, download it from the same website, and try to unlock your modem to use with any company (optional).
After this and the tablet off and plug the modem light up. When you turn the tablet will see the signal bar in the lower right corner.
3 - At this point of the tutorial is where I am a little confused. Since I do not know if I got the connection by using the method of xdadevelopers or if this is not necessary (because I did it before trying to connect to the UMTS Manager Root)
Two options: a) http://forum.xda-developers.com/showthread.php?t=2172914
This thread details a method somewhat difficult to do. I did it. Instead of using ES Explorer I used Root Explorer and instead of using the GScript used the Script Manager. The issue here is that after the method nothing happened, no connection established, no sailing. Then I opened the UMTS Manager Root and configured with APN, username and password for my ISP 3G. I used the port / dev/ttyUSB0 and "CONECT" with success.
b) Then it may not be necessary to make the method xdadevelopers and only need ROOT MANAGER UMTS on the tablet, download it from the PlayGoogle
https://play.google.com/store/search?q=UMTS+Manager+root&c=apps
add your apn, username and password. Then select the port / dev/ttyUSB0 and give Connect.
In the end I succeeded. Maybe some other user can play and comment if necessary xdadevelopers method (http://forum.xda-developers.com/showthread.php?t=2172914) before using the UMTS Manager Root or only using this apk wonderful connection is already achieved.
Thanks man
this is cool, just to add, the site you provided for unlcoking of huawei modems is no more in service so i just want to add a place people can generate free unlock codes for Huawei Modems like the E303 as you mentioned.
Huawei Unlock calculator
alright, So on my GSM HTC 8x (T-Mobile), I got File Explorer working in QPST. I can read and write various NVram values, change band prefs, etc. One thing interesting I found in the File Explorer (Not Windows OS, but for the Fileexp for the modem) is there is a directory called "Supl". In it is a file called "SuplRootCert". I copied it to my PC, and renamed it to "SuplRootCert.cer". When I opened the file, it presented itself as the "T-Mobile USA Root CA". Trusted Root Certificate.
I wonder what this is doing here? It can't be for Wi-Fi calling because the firmware doesn't support it (although it did at one time)..I wonder if we can put our own root certificate here and if the phone will trust it?
compu829 said:
alright, So on my GSM HTC 8x (T-Mobile), I got File Explorer working in QPST. I can read and write various NVram values, change band prefs, etc. One thing interesting I found in the File Explorer (Not Windows OS, but for the Fileexp for the modem) is there is a directory called "Supl". In it is a file called "SuplRootCert". I copied it to my PC, and renamed it to "SuplRootCert.cer". When I opened the file, it presented itself as the "T-Mobile USA Root CA". Trusted Root Certificate.
I wonder what this is doing here? It can't be for Wi-Fi calling because the firmware doesn't support it (although it did at one time)..I wonder if we can put our own root certificate here and if the phone will trust it?
Click to expand...
Click to collapse
The name of the certificate reminds me something about A-GPS, but I could be wrong....
But there is something very intriguing in your experiments: perhaps that way we could enable LTE on the international ATIV S.
Topogigi said:
The name of the certificate reminds me something about A-GPS, but I could be wrong....
But there is something very intriguing in your experiments: perhaps that way we could enable LTE on the international ATIV S.
Click to expand...
Click to collapse
I have something you ca try with your Ativ S, if you want:
Try installing the diagnosticApp_Sprint onto your Ativ via the Microsoft Store (Set OEMID to HTC and CID to "null") Then see if you can toast your way to app://e69a2877-59b8-43ed-898d-554fbc4b8b2b/_default#/EmbeddedTool;component/DMSwitchPage.xaml Once there, you can try toggling one of the switches (both will enable the necessary serial Port). When the phone auto-reboots, you should be able to connect it to the PC. Once Windows Update finds and installs the drivers (I am assuming it will do this for the ATIV S), launch the "QPST Service Programming tool" (QPST can be found on the forum if you search for it) Once that tool loads, pick out your device and click "connect". Once that loads, click "read from phone". now go to the UMTS System tab to set your band preferences. (My 8x had all of them enabled by default) (I have nothing to compare it to, so YMMV). Once you have made changes, just press "write to phone" and wait for it to reset. Hopefully then you will have LTE enabled!
compu829 said:
I have something you ca try with your Ativ S, if you want:
Try installing the diagnosticApp_Sprint onto your Ativ via the Microsoft Store (Set OEMID to HTC and CID to "null") Then see if you can toast your way to app://e69a2877-59b8-43ed-898d-554fbc4b8b2b/_default#/EmbeddedTool;component/DMSwitchPage.xaml Once there, you can try toggling one of the switches (both will enable the necessary serial Port). When the phone auto-reboots, you should be able to connect it to the PC. Once Windows Update finds and installs the drivers (I am assuming it will do this for the ATIV S), launch the "QPST Service Programming tool" (QPST can be found on the forum if you search for it) Once that tool loads, pick out your device and click "connect". Once that loads, click "read from phone". now go to the UMTS System tab to set your band preferences. (My 8x had all of them enabled by default) (I have nothing to compare it to, so YMMV). Once you have made changes, just press "write to phone" and wait for it to reset. Hopefully then you will have LTE enabled!
Click to expand...
Click to collapse
You can do this with samsung diagnosis, open it and enter *#7284#, then select QC RmNetComposite. After doing whatever you want, you can go back setting it to MTP again.
The phone will reboot when you change this value.
greenboxal said:
You can do this with samsung diagnosis, open it and enter *#7284#, then select QC RmNetComposite. After doing whatever you want, you can go back setting it to MTP again.
The phone will reboot when you change this value.
Click to expand...
Click to collapse
Obviously, the new version of the diagnosis app (the one included in the official GDR3 update) inhibits that code...I think I will decide myself to restart from GDR2 and upgrade with the "polish" hack, in the end. I was too lazy to do it, Now I have at least a good reason to do it....
compu829 said:
alright, So on my GSM HTC 8x (T-Mobile), I got File Explorer working in QPST. I can read and write various NVram values, change band prefs, etc. One thing interesting I found in the File Explorer (Not Windows OS, but for the Fileexp for the modem) is there is a directory called "Supl". In it is a file called "SuplRootCert". I copied it to my PC, and renamed it to "SuplRootCert.cer". When I opened the file, it presented itself as the "T-Mobile USA Root CA". Trusted Root Certificate.
I wonder what this is doing here? It can't be for Wi-Fi calling because the firmware doesn't support it (although it did at one time)..I wonder if we can put our own root certificate here and if the phone will trust it?
Click to expand...
Click to collapse
How did you do that? I mean... I have a GSM HTC 8x as well and I'd like to edit the registry (mainly to change roaming preferences, bands preferences and if it is possible, the accent colors). Is that possible?
I have installed the Sprint Diagnostics app but it only shows the IMEI info and the SIM card info, nothing more. It does absolutely nothing else. Am I missing something?
You need to install @cpuguy's Native Toast Launcher
and paste this inside the box.
app://e69a2877-59b8-43ed-898d-554fbc4b8b2b/_default#/EmbeddedTool;component/DMSwitchPage.xaml
Click to expand...
Click to collapse
cybermiguel said:
How did you do that? I mean... I have a GSM HTC 8x as well and I'd like to edit the registry (mainly to change roaming preferences, bands preferences and if it is possible, the accent colors). Is that possible?
I have installed the Sprint Diagnostics app but it only shows the IMEI info and the SIM card info, nothing more. It does absolutely nothing else. Am I missing something?
Click to expand...
Click to collapse
this only allows you to edit the phone modem at this time. We might be able to reflash the os partition with this.
compu829 said:
this only allows you to edit the phone modem at this time. We might be able to reflash the os partition with this.
Click to expand...
Click to collapse
Oh well, no problem with that. I'd like to know if I can enable the AWS band on my phone (I got the c620e version). By the way, working with the modem, can I set some MCCs to be recognised as "home" network? Because I use a MVO and the whole time it says it is roaming (when it actually isn't).
compu829 said:
this only allows you to edit the phone modem at this time. We might be able to reflash the os partition with this.
Click to expand...
Click to collapse
I tried your method but the tool is unable to write to the phone. Keeps getting a "phone stopped responding to memory" error
compu829 said:
I have something you ca try with your Ativ S, if you want:
Try installing the diagnosticApp_Sprint onto your Ativ via the Microsoft Store (Set OEMID to HTC and CID to "null") Then see if you can toast your way to app://e69a2877-59b8-43ed-898d-554fbc4b8b2b/_default#/EmbeddedTool;component/DMSwitchPage.xaml Once there, you can try toggling one of the switches (both will enable the necessary serial Port). When the phone auto-reboots, you should be able to connect it to the PC. Once Windows Update finds and installs the drivers (I am assuming it will do this for the ATIV S), launch the "QPST Service Programming tool" (QPST can be found on the forum if you search for it) Once that tool loads, pick out your device and click "connect". Once that loads, click "read from phone". now go to the UMTS System tab to set your band preferences. (My 8x had all of them enabled by default) (I have nothing to compare it to, so YMMV). Once you have made changes, just press "write to phone" and wait for it to reset. Hopefully then you will have LTE enabled!
Click to expand...
Click to collapse
I did all of that on my HTC 8x (model c620e) and it did work. However, I'm kind of stuck because Windows doesn't detect the appropriate drivers for the phone and all I got is "HTC Composite device". Do you have any driver that I can use?
@cybermiguel It did that to me at first, too. Make sure the PC you are using has Internet, right-click on the "HTC composite device" in device manager, select "update driver software". Then tell it to search automatically for drivers. They will "magically" appear.
AlvinPhilemon said:
I tried your method but the tool is unable to write to the phone. Keeps getting a "phone stopped responding to memory" error
Click to expand...
Click to collapse
weird. I was using QPST 2.7 Build 402, and it was working fine. I was able to use "EFS Explorer" and "Service Programming" to read/write various info. Try a different USB cable or port on your computer?
Try this driver, for me work (disable driver signature)
My options for Ativ S LTE support
Here my options (ativ S)
What i enable for LTE support?
Mattemoller90 said:
Here my options (ativ S)
What i enable for LTE support?
Click to expand...
Click to collapse
keep going...there is a tab all the way over to the right that will deal with LTE.
compu829 said:
keep going...there is a tab all the way over to the right that will deal with LTE.
Click to expand...
Click to collapse
Find!! This is my "LTE tab"
If you have a phone with LTE enable I can try to set my "LTE tab" as yours
It's dangerous for my phone?
Mattemoller90 said:
Find!! This is my "LTE tab"
If you have a phone with LTE enable I can try to set my "LTE tab" as yours
It's dangerous for my phone?
Click to expand...
Click to collapse
Who knows...
Anyone know how can we connect Lumia 920 over QPST ?
it can't detect my Phone
Mattemoller90 said:
Find!! This is my "LTE tab"
If you have a phone with LTE enable I can try to set my "LTE tab" as yours
It's dangerous for my phone?
Click to expand...
Click to collapse
The screenshot you posted seems to me unuseful: all is already enabled and activated. Can you please post a screenshot of the NAS tab? There you should find if LTE UE OP classes are enabled, and, first of all, if UE RAT includes LTE or not.
Hello,
It's been 6 months since I'm looking for a solution to run the MMS on my mobile LG-E900 (Optimus 7) Windows Phone 7 (OS version: 7.10.8862.144).
The phone came with the Orange network and I use it now with Free Mobile card. Internet access works well but I can not send or receive MMS (despite the activation mode "Data Connections".)
- when I send an MMS, I get the message "Sending message impossible. Retry. "
- when I get an MMS and I click on the link "Get media content", there is a message "Getting media content" and then redisplay the link "Get media content" and nothing happens .
Having looked around many forums, I tried several solutions without success:
1 - put me near a Free Mobile antenna array and send me an MMS: unsuccessfully
2 - change the APN settings: for the moment, I 'have the following settings: APN = free, Username = "" Password = "", Proxy Server / URL = "", Proxy Port = ""
3 - try inserting a card and Orange launch the application "Network settings" (version 3.0.3.0) as described here: http://www.monwindowsphone.com/solution-mms-free-mobile-omnia-7-t14550.html. This does not work because I do not see profile when using a Free Orange card.
4 - change the table registry as described here: http://forum.xda-developers.com/showpost.php?p=16363034&postcount=3
I heard that a solution would be to get the XML config file for Free Mobile but I don't know how to get it and how to use it...
I confess that I am discouraged and a solution in this Christmas season would make me happy. Thanks in advance for your time and help!
Happy Holidays! Gigi
Hello,
A friend of mine has been hitting the same issue and I looked on it few days ago. Good news is I found a solution!
You need few packages :
- WP SDK 7.1 from the Microsoft Web site
- WP7RootTools 1.2 from http://www.wp7roottools.com
- Transfer_IsoStore_Package.zip from this thread
- DiagProvXMLv0.91_IS.xap from this thread
- __PROV__FRE_FR_208_15.zip attached to this thread and unzip it to get the XML file
- MFG application must be installed
Then, follow this the procedure:
1. Make sure WP SDK 7.1 is installed
2. Follow the guide to Interop-Unlock your LG phone at http://www.wp7roottools.com/index.php/guides/interop-unlock
3. Using Application Deployment tool from WP 7.1 SDK, deploy WP7RootTools 1.2 on your LG phone and launch it to have it fully initialize your phone
4. Using Application Deployment tool from WP 7.1 SDK, deploy DiagProvXMLv0.91_IS.xap on your LG phone and launch it
5. Start the Isolated Storage Explorer (Ise_GUI_1.1 file from the Transfer_IsoStore_Package.zip package)
6. At the top type in the GUID of the app you want to access the Isolated Storage (e.g.: GUID DiagProvXML app: {566814df-f6b6-4154-8be5-9e65dce907c0})
7. Press "Get Data" Button
8. Press "Download Data to my computer", create a new folder where the data from your device should be stored and download the data to your desktop
9. Inside the before created folder you will find a "IsolatedStore" folder, browse to this folder and add the __PROV__FRE_FR_208_15.xml file to it
10. Press "Upload folder to Isolated Storage", choose the "IsolatedStore" folder where you have added the file and upload it to your device
11. On your phone, launch WP7 Rool Tools, go to Explorer and browse to \Applications\Data\566814DF-F6B6-4154-8BE5-9E65DCE907C0\Data\IsolatedStore\
12. Select the XML file and choose Copy
13. Now browse to \Windows and choose Paste in the icon bar
14. Open MFG app and enter the password APPMFG#*#
15. Go to 7 - Engineer Menu
16. Go to 6 - Other Settings
17. Go to Set network profiles
18. Enter 208 for MCC and 15 for MNC and click Find
19. The XML file appears in the box, click on it to apply settings. It will configure APN for Internet and MMS for Free Mobile
20. Reboot your phone and you should be able to send and receive MMS - Make sure Data is enabled in Cellular Phone properties on the phone.
Have fun!
[SOLVED] Request to Santa: MMS on LG-E900 with Free Mobile network !
It works !!!
Thanks a lot for your great help ! After several months without MMS on my LG Optimus 7 with Free Mobile, now MMS are usable on it thanks to your solution below.
I just launched DiagProvXML on my phone between step 4 and step 5 in order to make step 5 working. I just precised also that lockscreen of your mobile must be off during steps after 4.
Santa came as I wished
I am going to send your solution on french forums : http://www.monwindowsphone.com and http://www.windowsphonefr.com/forum
I wish a happy new year !
Gigi.
StefanSki said:
Hello,
A friend of mine has been hitting the same issue and I looked on it few days ago. Good news is I found a solution!
You need few packages :
- WP SDK 7.1 from the Microsoft Web site
- WP7RootTools 1.2 from http://www.wp7roottools.com
- Transfer_IsoStore_Package.zip from this thread
- DiagProvXMLv0.91_IS.xap from this thread
- __PROV__FRE_FR_208_15.zip attached to this thread and unzip it to get the XML file
- MFG application must be installed
Then, follow this the procedure:
1. Make sure WP SDK 7.1 is installed
2. Follow the guide to Interop-Unlock your LG phone at http://www.wp7roottools.com/index.php/guides/interop-unlock
3. Using Application Deployment tool from WP 7.1 SDK, deploy WP7RootTools 1.2 on your LG phone and launch it to have it fully initialize your phone
4. Using Application Deployment tool from WP 7.1 SDK, deploy DiagProvXMLv0.91_IS.xap on your LG phone
5. Start the Isolated Storage Explorer (Ise_GUI_1.1 file from the Transfer_IsoStore_Package.zip package)
6. At the top type in the GUID of the app you want to access the Isolated Storage (e.g.: GUID DiagProvXML app: {566814df-f6b6-4154-8be5-9e65dce907c0})
7. Press "Get Data" Button
8. Press "Download Data to my computer", create a new folder where the data from your device should be stored and download the data to your desktop
9. Inside the before created folder you will find a "IsolatedStore" folder, browse to this folder and add the __PROV__FRE_FR_208_15.xml file to it
10. Press "Upload folder to Isolated Storage", choose the "IsolatedStore" folder where you have added the file and upload it to your device
11. On your phone, launch WP7 Rool Tools, go to Explorer and browse to \Applications\Data\566814DF-F6B6-4154-8BE5-9E65DCE907C0\Data\IsolatedStore\
12. Select the XML file and choose Copy
13. Now browse to \Windows and choose Paste in the icon bar
14. Open MFG app and enter the password APPMFG#*#
15. Go to 7 - Engineer Menu
16. Go to 6 - Other Settings
17. Go to Set network profiles
18. Enter 208 for MCC and 15 for MNC and click Find
19. The XML file appears in the box, click on it to apply settings. It will configure APN for Internet and MMS for Free Mobile
20. Reboot your phone and you should be able to send and receive MMS - Make sure Data is enabled in Cellular Phone properties on the phone.
Have fun!
Click to expand...
Click to collapse
Thanks for the feedback. I added a comment in step 4 to launch DiagProvXML. Feel free to share it, glad to help.
Instruction for users , who have problems with bad nv items for lg e900 optimus .
Maybe this procedure repair your bricket lg phone , this is the best method to fix your wrong ,resetting phone (when show only lg logo ,nothing more , you must know that , your "umts nv items" are wrong , dont enable "automatic mode at MFG app at phone at modem settings , because settings will change ) .
-Install newest qpst ( ver 402) program with drivers for phone ( from lg site )
- enable QC Composite mode for port setting at MFG application at phone ( access - ##634# and 277634#*# )
-restart phone
-connect phone to pc , at qpst configuration make new manual connection for your com port ( what com ? find at task menager )
It is important to have older factory firmware (not wp7.8 ) at phone because newest have rather blocked some functionality , for example v10b , v10c these .DZ files will be ok ( you can downgrade firmware version of your phone with lgdp2 v33 program with .DZ file ) .
- next open "Download program" (qpst program section) and click for "backup " bookmark , make location for wiriting .qcn file with nv items.
Further is more easily
.
This program have some additional funcionality , for example qpst programming (you can change umts setting for example )
My good nv item file for you at attachemnts.
****PEOPLE WHO ARE THINKING ITS SPAMMING POST THEN BE ASIDE FROM THIS THREAD****
I am using mmx a120 (4.4.2,8gb) And when i was not om custom rom then it was locking locking my 2G network in 5-6s and 3G in 4-5s and also 3G only working fine but afterwards i try to install wiko 5.0 Rom then on sp tool its shows i have to use "format all+download" So i do that and i forget to take a backup and after rom flashed then 2G is locking in 30-50s and 3G in 2-4min and no network in 3G only and when choosing 3G only then also 2nd sim getting no network and i have to restart the phone to get back 2G again !
I have searched on xda and i got a solution also but that is for micromax a210 (And mine is a120) so, if anybody have faced this issue before and now solved then reply here !
***IT WILL BE HELPFULL FOR ME TOO MUCH***
Exactly the same issue with me
I am suffering from the exact same problem. I recently flashed my mmx A120 with stock ram and just like you, I didn't make a backup of any sorts. Now I have rooted my phone and I have 2gb for app installation. Everything is good except now when I choose 3g only, the network signals instantly vanishes. It's becoming a huge problem for me as no body likes to use 2g. I mean Nobody ! If you come across a solution please do help me as well by letting me know. I will be grateful to you.
Solved Canvas A120 3G work perfect
Sushant.420 said:
I am suffering from the exact same problem. I recently flashed my mmx A120 with stock ram and just like you, I didn't make a backup of any sorts. Now I have rooted my phone and I have 2gb for app installation. Everything is good except now when I choose 3g only, the network signals instantly vanishes. It's becoming a huge problem for me as no body likes to use 2g. I mean Nobody ! If you come across a solution please do help me as well by letting me know. I will be grateful to you.
Click to expand...
Click to collapse
Hi,
Update parameters via maui 3g meta tool,
1. Open mauimeta 3g tool (run as administrator)
2. From options select connect smartphone in meta mode
3. Press reconnect
4. Switch off your phone and connect it to usb. the phone will boot up and stuck on boot logo(dont panic its normal). After sometime in the tool u will see the phone's parameters like gsm850,it means that it is successfully detected by the tool
5. Now select update parameter from the drop down menu,a popup will appear
6. click on change nvram database and select the given modem file
7. click on load from file and select the ini file
8. wait for sometime the barcode check box on below will be automatically checked and will display a message load from file completed
If you want ini configuration file of canvas a120
Suggest how to upload
rahulramavat5 said:
Hi,
Update parameters via maui 3g meta tool,
1. Open mauimeta 3g tool (run as administrator)
2. From options select connect smartphone in meta mode
3. Press reconnect
4. Switch off your phone and connect it to usb. the phone will boot up and stuck on boot logo(dont panic its normal). After sometime in the tool u will see the phone's parameters like gsm850,it means that it is successfully detected by the tool
5. Now select update parameter from the drop down menu,a popup will appear
6. click on change nvram database and select the given modem file
7. click on load from file and select the ini file
8. wait for sometime the barcode check box on below will be automatically checked and will display a message load from file completed
If you want ini configuration file of canvas a120
Suggest how to upload
Click to expand...
Click to collapse
Link
https://drive.google.com/drive/folders/1jsHzdo3_kM14N-LwjK0uk9gyIbqXKkVw
---------- Post added at 03:57 PM ---------- Previous post was at 03:54 PM ----------
rahulramavat5 said:
Hi,
Update parameters via maui 3g meta tool,
1. Open mauimeta 3g tool (run as administrator)
2. From options select connect smartphone in meta mode
3. Press reconnect
4. Switch off your phone and connect it to usb. the phone will boot up and stuck on boot logo(dont panic its normal). After sometime in the tool u will see the phone's parameters like gsm850,it means that it is successfully detected by the tool
5. Now select update parameter from the drop down menu,a popup will appear
6. click on change nvram database and select the given modem file
7. click on load from file and select the ini file
8. wait for sometime the barcode check box on below will be automatically checked and will display a message load from file completed
If you want ini configuration file of canvas a120
Suggest how to upload
Click to expand...
Click to collapse
https://drive.google.com/drive/folders/1jsHzdo3_kM14N-LwjK0uk9gyIbqXKkVw