I am having trouble answering income calls. The only option seems to be to swipe the circle. About half the time it fails resulting in me not being able to answer the phone and the caller going to voicemail.
The flip down to not answer and bring to ear to answer also seems to work about 50/50. Is there a setting I am missing to swipe and answer or hit a button and answer? The drag the circle answer just is not cutting it.
LG v20 - AT&T flavor
Nothing? Makes the phone questionable....
I agree that swiping to 'outside' the circle doesn't always work, but not to the tune of 50%.
On rare occasions, I sometimes see the circles replaced with a row of square (rectangle) boxes with the same functionality as the circles, yet they say "Touch" instead of "Swipe" for results. I don't know how to make that a permanent action though.
BTW ... the concept behind swiping to answer is so you can't inadvertently answer/cancel a call just by grabbing the phone in the wrong spot, so depending on where/how you use the phone ... be careful what you ask for as it may come with unintended results. If you're really having an issue with the Swiping aspect of answering a call, see if it's the same on the display in the store ... if not, you have a faulty phone and they'll give you another under warranty.
My two swipes worth.
In phone settings you can change it to touch and hold to answer. Works much better.
Androiddiego is right.
My phone is through Verizon and here's how it maps out: Settings ---> Accessability ---> Dexterity & Interaction ---> Touch & Hold for calls ---> slide button to "ON".
This is better than the swipe to answer!
That is really cool! On my T-mobile the sequence is:
Settings --> General --> Accessibility --> Motor and cognition --> Touch and hold for calls
fclifton said:
That is really cool! On my T-mobile the sequence is:
Settings --> General --> Accessibility --> Motor and cognition --> Touch and hold for calls
Click to expand...
Click to collapse
Yes.
This is great! You have no idea how frustrating this was. This is the same for AT&T as T-Mobile.
Related
Gday TyTN folk.
I have an iMate PDA2k and am thinking of moving to TyTN, but being a bit frustrated with my current unit I'd like to know whether TyTN makes a better phone than BA does.
My specific botherments are:
- notification light (green/red/orange) where the functions over-ride each other. e.g. if I miss a call while its charging, it starts flashing red, but then it completes charging and goes green. Actually, even if it's not charging it seems to stop flashing red after a while. I want it to keep flashing red until I actually handle the device and should have noticed.
To me it makes more sense to combine the bluetooth light with the charge light, and leave the phone notification as a separate item.
- notification icon space in start bar. Currently it's ALWAYS showing a multi-message bubble icon (I'm always in CDMA 1x coverage, and also have an app running that puts its own notification icon up) so I don't see a new one for SMS or voice message. It looks like the best answer might actually be a 3rd party start-bar app, but still.. is it any better under WM5?
- waking up. Incoming calls, messages, and bluetooth connections, wake up the device completely. If it's in the pouch, or worse, in my pocket, the screen then gets bumped, thereby performing actions I don't want to. Even getting it out of my pocket without bumping the screen is a challenge. I tried setting an unlock password (some time ago) but that wasn't satisfactory; I don't remember whether the screen still unlocked on incoming calls, or if unlocking was too much a nuisance.
Ideally, it should wake up enough so that the firm hardware buttons are unlocked but the screen isn't active until you've used a button.
The voice-recording button used to annoy me with accidental presses when removing from pouch; I changed that button to do screen rotate which I find more useful, and no big deal when pushed accidentally - just push it again.
- Sound quality, especially for the person on the other end of a call. I've had people tell me I'm faint on the iMate. Positioning is a little interesting as I don't really want to rub my face all over the screen. Does the TyTN pick up any better?
- turning the phone off. (Like Windows' contradictory "click start to shut down") I really don't like the fiddly actions required to "turn on flight mode" on pda2k, especially when I don't want to get out the stylus. People with normal mobile phones can turn them completely off using one hardware button, and they don't have to look hard to see whether it's on or off. Some have mentioned wanting an easy way to switch to/from silent mode.
Is there a quick, sensible, easy way to turn the phone on and off, preferably also to/from silent?
Thanks
gregnash said:
- notification icon space in start bar. Currently it's ALWAYS showing a multi-message bubble icon (I'm always in CDMA 1x coverage, and also have an app running that puts its own notification icon up) so I don't see a new one for SMS or voice message. It looks like the best answer might actually be a 3rd party start-bar app, but still.. is it any better under WM5?
Click to expand...
Click to collapse
First a corresponding icon (envelope, phone), after more notifications, you get a bubble (?). Not a bubble all the time.
gregnash said:
- turning the phone off. (Like Windows' contradictory "click start to shut down") I really don't like the fiddly actions required to "turn on flight mode" on pda2k, especially when I don't want to get out the stylus. People with normal mobile phones can turn them completely off using one hardware button, and they don't have to look hard to see whether it's on or off. Some have mentioned wanting an easy way to switch to/from silent mode.
Is there a quick, sensible, easy way to turn the phone on and off, preferably also to/from silent?
Click to expand...
Click to collapse
One hardware button for standby, hold it to turn the device off completely. You get a window where you can just hit the d-pad button.
There's also a button for comm-manager, there you can select silent/vibrate mode and flight mode.
Hi, you speak of not wanting to rub your face on the screen, I actually use my TyTN in speaker phone mode to prevent this, I just quickly enable speaker on a call, and flip the phone to where the back is by my face, it puts the speaker in a good spot also, I know it sounds a bit weird, bit works pretty well.
Granted I don't do this with every call, mostly I use it when I know the call is gonna last for more than a few minutes.
notifications, buttons
TiMMah!!! said:
First a corresponding icon (envelope, phone), after more notifications, you get a bubble (?). Not a bubble all the time.
One hardware button for standby, hold it to turn the device off completely. You get a window where you can just hit the d-pad button.
There's also a button for comm-manager, there you can select silent/vibrate mode and flight mode.
Click to expand...
Click to collapse
You're right about the notification icon, but if I was watching the screen at the time of the additional notify then I'd already know what's there and wouldn't need the icon. On the pda2k cdma, being in a 1x coverage area generates a notification, plus mNotes puts one, so there's a bubble even before I receive any sms, voicemail etc. Combine that with the behaviour of the flashing light, it means if I missed something I may not know about it unless I go looking.
Thanks re the hardware button, that's good news.
face-rubbing
ChaoticDruid said:
Hi, you speak of not wanting to rub your face on the screen, I actually use my TyTN in speaker phone mode to prevent this, I just quickly enable speaker on a call, and flip the phone to where the back is by my face, it puts the speaker in a good spot also, I know it sounds a bit weird, bit works pretty well.
Granted I don't do this with every call, mostly I use it when I know the call is gonna last for more than a few minutes.
Click to expand...
Click to collapse
Creative! I'll remember that one..
Sounds like you should check out PhoneAlarm
hello xda community
i'm very new to the blackstone and this is my first post here. so please bear with me if i'm asking very basic questions here.
my problem:
i carry my blackstone in my pocket all the time. and many people told me throughout the last days that they called me and that i picked up the call by accident.
since i work at customer sites mostly my phone is muted. so people call me and somehow i pickup the calls while the phone is in my pocket.
i always turn of the screen and i have the automatic lock (password protection) enabled. still when the incoming call screen comes up it looks like it is possible that calls are being picked up.
i know there is the slide which has to be moved to the left in order to pickup calls.
i have tried myself by calling my from my home phone and touching the screen and the buttons at random. and indeed the calls are being picked up. i was not able to find out how this is happening ... but it does.
so is there any setting i can change or any additional piece of software i can install to make sure calls are only answered when i want?
possible a reg key i need to change?
any help is very much appreciated
cheers
This isn't just a problem with the Blackstone; every WM phone I have had does this. I have found that a good locking program handles this quie well. I personally like S2U2 by A_C, but there are many others available. You can look in the apps forum, or check the development & hacking forum from the main menu.
The other thing to check is that you have all your notifcations set properly. I set all of mine to vibrate only. Many of them turn on the screen by default. Unfortunately this won't fix the problem on its' own though.
mwelch16 ... thank you very much for the reply
i will give it a try and see how it works for me.
so that means first of all i will have to slide that iphone type of lock and then take the call by using the regular slider?
is there any other way (without) an additional piece of software to handle this? cause after all there is the build in slider ... but somehow it's not working as it is supposed to. any enhancement to that?
thanks again
Is there a way how to disable the CALL PICKUP button which is on the left? so the first of the four buttons?
I think it's because it getting pressed while my phone is in the pocket.
thanks a lot
I use Pocket Shield - it's not free (free to try though) but it's worked well for me
tibor78 said:
mwelch16 ... thank you very much for the reply
i will give it a try and see how it works for me.
so that means first of all i will have to slide that iphone type of lock and then take the call by using the regular slider?
is there any other way (without) an additional piece of software to handle this? cause after all there is the build in slider ... but somehow it's not working as it is supposed to. any enhancement to that?
thanks again
Click to expand...
Click to collapse
No, S2U2 will unlock itself for a phone call and then lock the phone again after the call. So no need to slide to unlock and then answer your phone. It has a bunch of different settings, and yes I believe it locks the hard buttons.
thanks folks for the replies
i found all the settings i was looking for in the S2U2 options. so i'm good right now.
thanks again
You're probably answering the call by pressing the "phone" button (the very left of the four buttons on the bottom). You can either use those buttons to answer/hang up, or the on screen slider.
I've used AE Button Plus to disable the 'Answer' and 'End' hardware keys and re-mapped them to turn wifi and bluetooth off and on. This way there is no chance of hanging up on a call by mistake since you need to use the slide to answer on screen.
Similar but opposite problem
I'm having a problem along the same lines. If I get a call when the phone is in my pocket and answer it on my bluetooth headset, when the call ends the phone then rings someone else, usually the same person who is at the top of my contacts list. Not only is this damned annoying for me, it's getting a bit tedious for the person getting the unwanted calls.
Is there any way to get the phone to immediately lock as soon as a call terminates to prevent this happening? I'm assuming that once the call ends and it returns to the default contact/dial pad screen, the merest brush against the screen will be enough to start a new call.
I'm beginning to think I should have stuck with my iPhone
CreepinJesus said:
You're probably answering the call by pressing the "phone" button (the very left of the four buttons on the bottom). You can either use those buttons to answer/hang up, or the on screen slider.
Click to expand...
Click to collapse
I've the exact same problem, 3/4 of the incoming calls rejected when I get the phone out of my pocket due to End button accidentally pressed.
What did they thought when they implement the slide to answer ????
The purpose of the slide to answer is to avoid such accident, but why the hell did they keep the Answer / End buttons active ????? total non sense to me.
Will check if this AE Button + app can solve this annoying behaviour.
has anyone tried Lockmelite?
It may help - haven't used it myself though.
x 2 for PocketShield. It uses the light sensor in your phone to prevent the touchscreen from activating when the device is inside, say, a pouch, or in your pocket.
I'm using evaluation version 2.6.2.10, which as I understand it, has full functionality, except that every now and then, randomly (and IMO infrequently enough to not be annoying) before unlocking it displays a 10 second message saying that you're using an evaluation version. Note that this *never* happens during an incoming phone call. Good stuff.
Hi,
Try TouchLockPro :
http://forum.xda-developers.com/showthread.php?t=444215
Now it handle light unlock in any cases, that as solved all my issues (pocket, in cas BT,...) and fulfill all my requirements.
BR
Pocket Shield doing perfect job for me
I use AE Buttons Plus to disable the "Answer" & "End" virtual buttons. Then I used iconsoft Phonext to handle all my calling functionalities. When a call comes in, Phonext display a lock screen which you have to slide before it presents you with all the options like answer, decline, silence etc.
This way, I never accidentally pickup a call or dial a number.
Hi there,
I am a little ticked off with the way the phone switches the light off and you HAVE to press a button to get it back up when in the middle of a call.
Is there any way to keep the phone awake while on a call? Ofcourse, I HAVE tried out "Shake Awake", but thats a little buggy too.
And also, the buttons for Hold, Mute, Speaker mode and all those options come up only when you press the menu button. Is there any alternate dialler available or something which can get all these options on the screen while on the call like the iPhone as its easier to use it than press the button to get the options?
just install keepscreen.
edit: this will keep the screen alive. about the alternative dialer i don't know. but be aware that the phone has no proximity sensor, so you are prone to accidentally press random buttons.
Cool. Will check it out man. Thanks.
I have a different problem - since, sadly, Hero has not got a proximity sensor, I constantly drop my calls by accidently touching the end call button with my cheek. I believe that's a reason the screen backlight goes off so quickly during a call - when the screen is off, it does not react to touch too, so that accident call drops would be less likely.
There are still some serious problems though. First of all, screen timeout during a call is not short nough - while you can know that you must wait a few seconds before you can actually touch the phone with the face, others can't, so call drops are, sadly, unavoidable in such cases. The fact that hold, mute and other buttons are hidden under the menu button is a good thing not only because it keeps Android phillosophy straight, but reduces chances of unwanted misc. actions. The solution of this problem could be an option to disable the end call button, since there are dedicated hardware keys for that.
I have also noticed that if you minimize the dialer during a call with home button, the screen timeout will not be quick, so before continuing a call it's a good idea to bring the dialer back by tapping the hardware call button so the screen timeout becomes quiick again.
Very true. I thought about all these before I posted, but on the other end, I just said 'f it' to myself and asked it here.. hehe.
I wonder if iPhone users have such issues.
As someone in this forum mentioned, it is best to have the screen switched OFF during a call, unless you have something to do. This way, it prevents you from fiddling with the controls.
Not just the hero, earlier models too have this feature. It quite odd in the beginning, but you will love it later.
subhramani said:
Hi there,
And also, the buttons for Hold, Mute, Speaker mode and all those options come up only when you press the menu button.
Click to expand...
Click to collapse
Not necessary!
During a call
- Press "Call" to hold (will also mute)
- Press and hold "Call" to activate speaker mode.
Hi,
I love my new HD2, but i've got the following problem:
The proximity sensor works doesn't work 10% of the time and because the touchscreen is so sensitive, i end up pressing random buttons with my ear or face. I've been manually locking the screen during calls which:
- is really annoying
- doesn't really solve the problem, screen lock during calls does not require slider to unlock, just a regular button and also has a hang up button on it, so it's pretty much back to the original problem.
I know that there's many custom apps out there that can circumvent this issue but i like the stock lock screen (with slider), i don't need another one.
What i need is an app that automatically locks my screen using htc's "slide to unlock" screen after i accept incoming call or after my outgoing call is connected.
If anyone can help me with this i would apreciate it.
why not try s2u2
it has ability to lock after call is connected
do u have something in way of proximity sensor? case or screen protector? i had similar problem but after making bigger hole in screen protector it works 100%
@brkix: i would like a solution that uses the stock lock screen if possible
@lake: i have nothing of the sort, but i confirmed in several forums including this one that the proximity sensor is not 100% reliable
I exactly have the same problem. in my case I want to place a call then want to put the phone in its case while training or running whatsoever and I would really appreciate of being able to lock the keys in order to avoid accidental touching.
schlox said:
I exactly have the same problem. in my case I want to place a call then want to put the phone in its case while training or running whatsoever and I would really appreciate of being able to lock the keys in order to avoid accidental touching.
Click to expand...
Click to collapse
man said everything
+1
SmartLock, offers incall and outcall lock. This may be your best option.
This CAB will lock the hardware buttons when you are in a call if that helps
http://www.cabcache.com/cabs.asp?cab=29
Do you have hair covering your ear?
Without wearing any head wear my sensor works 100% perfect.
Per advice in the second post, I've yesterday installed s2u2. Mates, this program works really good and answers my necessities. All I had to do was to put a short cut of the application to my main screen. Then, I just lock the device by tapping the lock button during a call.
There's even an option existing to lock the phone automatically when the backlight is off and/or during a call directly.
wingm4n said:
Hi,
... I've been manually locking the screen during calls ...
Click to expand...
Click to collapse
Oh well! Please, tell me how you do it!
I'd pleased if at least I could manually deactivate the screen in order to avoid touching button with my cheek!
I've been trying to find an option to lock screen during a call without succeed.
Thanks,
Cheers!
I have the same problem. This part fails.
Sorry, but I insist... wingm4n: how do you lock the screen during calls?
I still haven't been able to find such option
Cheers,
Up....
Hit start then lock(at bottom left side of screen) after dialing or answering a call.
i have same issue...not with keylocks but with the screen!!!almost every time i make or receive a call with my phone in my pocket or by ear hd2 make itself an other call or push lots of function..and this is very annoying!!!i don't like s2u2...really doesn't any solution exist for solve this problem???
thank you!
Cheers!!
Smartlock
Take a look at this:
http://forum.xda-developers.com/showthread.php?t=505032
It locks the screen during calls, and has some other settings as well. I've been using it for a while and it seems to work just fine. And best of all, its free.
in s2u2 settings, just set: "lock on talk" and deselect "lock device". in this way...lock screen will work only in a call. that's it
I used to have such problem during my first uses with the HD2, I would realize because all of a sudden I heard keypad tones (and so did the other person ) while hitting the dialer with my cheek.
After that, I started noticing IF the proximity sensor triggered or not.
It's not really "idle", it's just very "picky", you actually need your ear to cover it, and not just your head being in its way... I took te habit of checking the phone display with the back of my eye to see if it's on while I answer a call, and if it is all I need to do is to move it on my ear so I touch the area with the proximity sensor the display turns off again. Works for me practically 100% of the times now.
How to turn this off
I have a HD2 running the energy rom and when a call is connected it locks the screen. But I use google voice and need to be able to enter my pin. Anyone know how to get the screen not to lock during a call.
I just installed Google Voice on my Epic 4G and received my first phone call on it - and was unable to answer. Two problems - first, when I answered, the greeting telling me to press "1" to accept was cut off at the beginning (all I heard was '...all from [spoken voice]. Press 1 to accept".
I can get past that, but then when I pulled up the dial pad to press 1, I was unable to. I pounded on the "1," was sure it was showing up, but it would not answer the call. I tried enabling audible touch tones but that didn't work, and I don't think there's a setting on the epic to change between long/short touch tones.
Does anyone know what's going on with this?
pissinguoff247 said:
I just installed Google Voice on my Epic 4G and received my first phone call on it - and was unable to answer. Two problems - first, when I answered, the greeting telling me to press "1" to accept was cut off at the beginning (all I heard was '...all from [spoken voice]. Press 1 to accept".
I can get past that, but then when I pulled up the dial pad to press 1, I was unable to. I pounded on the "1," was sure it was showing up, but it would not answer the call. I tried enabling audible touch tones but that didn't work, and I don't think there's a setting on the epic to change between long/short touch tones.
Does anyone know what's going on with this?
Click to expand...
Click to collapse
I think the second problem is a bug. It's not related to google voice but the phone itself. The dialpad is not very responsive when you take the phone off your face and the screen is back on. Wait a few seconds, and it'll be back again.
It happened all the time when I called any customer service number and tried to use the dialpad to choose in the menu.
Bigger problem
fookxixi said:
I think the second problem is a bug. It's not related to google voice but the phone itself. The dialpad is not very responsive when you take the phone off your face and the screen is back on. Wait a few seconds, and it'll be back again.
It happened all the time when I called any customer service number and tried to use the dialpad to choose in the menu.
Click to expand...
Click to collapse
I never had the phone to my face when I did my test calls - this was always phone in my hand and calling from my office phone.
I think I just came across a bigger problem - the dialpad doesn't work on incoming calls. I just called my phone from my office on the regular (not G-voice) number and pushed a bunch of buttons, and couldn't hear the tones.
You can disable the initial greeting and go straight to the call when you pick up. It is under Voice Setting in your google voice account. I know this doesn't address your unresponsive screen issue, but it's a temporary work around until your dialpad gets fixed.
bojackson63044 said:
You can disable the initial greeting and go straight to the call when you pick up. It is under Voice Setting in your google voice account. I know this doesn't address your unresponsive screen issue, but it's a temporary work around until your dialpad gets fixed.
Click to expand...
Click to collapse
Is this actually a bug? I posted another thread here and am trying to have people verify whether or not this is a real issue - if it's not a bug then I definitely need to replace the phone, 'cuz it's been factory reset as of last night.