Hi Guys!
With missing physical homebutton how can I do a factory reset?
There is no home button for volume Up - home button - Power button...
How can I do that? Any ideas?
Volume up - Bixby - Power button
Worked! Thank you so much!
Related
Hard reset sequence: Press ?
VoiceDial button + Camera button + soft reset. You will get a screen with 3 colored bars; at this screen, press the D-Pad UP.
where is "D-Pad UP" ?
it is ok
the right Hard reset sequence:
VoiceDial button + communications button + soft reset. You will get a screen that prompt you press answer button
Please help! I installed one nasty software and my screen is now blank, i want to hard reset but which buttons to press and hold?
hold both volume buttons on the side, and pres the power button, now it wil start in hard reset mode
WendigoNL said:
hold both volume buttons on the side, and pres the power button, now it wil start in hard reset mode
Click to expand...
Click to collapse
Thanks very much.
what 'nasty' program was this so we can all avoid it?
Hello,
I have a Verizon Imagio (HTC Leo) and cannot figure out how to do a basic soft reset. Does anyone know how to perform this via either button combinations OR a program on the phone that does a SOFT reset (not the full HARD reset). Thanks for any help on this!
Cheers!
~Dubhead
that's the whitestone.... look a little further down the page...
Also wouldnt it be the power button that you hold down, i think its not a dedicated button so i will guess the call end button will do this.
Dubhead said:
Hello,
I have a Verizon Imagio (HTC Leo) and cannot figure out how to do a basic soft reset. Does anyone know how to perform this via either button combinations OR a program on the phone that does a SOFT reset (not the full HARD reset). Thanks for any help on this!
Cheers!
~Dubhead
Click to expand...
Click to collapse
Hold down the power button (hang up) and an option to power off the device will be shown.
WildWayz said:
Hold down the power button (hang up) and an option to power off the device will be shown.
Click to expand...
Click to collapse
Is this to power off the device or to reset the device? I think it is to power off...
Poweroff is a soft reset.
A hard reset blows away all your info and settings. Like a format
Hold the power button down and you will get a prompt.
of
pull the battery
Or hit the reset button under the battery cover. Little red button.
Hard reset is holding both the volup and voldown buttons during poweron
You could try Touchoff... it installs as a cab file and when you hold your power button down, it gives you the option of shutdown, soft reset, etc... or pxshutxp... which is an app that you have to tap to open for the same functions as touchoff....
Hi all, guys. So, the problem is the following...
I need to hard reset mi topaz, but the VolUP + VolDown + PowerON method doesn't work. The 1234 method can't be performed since I can't access start menu. I didn't try the VolUP + VolDown + RED button when Topaz is turned on.
I think it's strange that method 1 doesn't work. It boots normally, like ignoring I'm pressing the two Volume buttons...
Any suggestion, solution, guys?
Thanks in advance!
The RED button method worked, but It's strange why the VolUP + VolDown + PowerOn method is still not working...
the soft reset and power buttons do the same thing, it just reboots the phone, and while phone starts to boot, before splash screen appears, is when you have to hold the volume keys.
So it would be;
Power on, THEN hold both volume keys immediately before device starts to boot,
or
Hit soft reset, THEN hold both volume keys immediately before device starts to boot
Did you do exactly this?
To perform a Diamond 2 hard reset
1. With the device turned off, press and hold the VOLUME UP and VOLUME DOWN buttons, then briefly press the POWER button.
2. Continue pressing the VOLUME UP and VOLUME DOWN buttons until you see this message on the screen:
Bruce Inman said:
Power on, THEN hold both volume keys immediately before device starts to boot
Click to expand...
Click to collapse
This doesn't work. I think you got it mixed up.
ArtieQ wrote the correct way.
No, it works, you just aren't fast enough.
It's just different ways to get to the same place.
The point is, volumes must be pressed as device begins to boot.
I just soft reset and press them and it always works for me.
Bruce Inman said:
No, it works, you just aren't fast enough.
It's just different ways to get to the same place.
The point is, volumes must be pressed as device begins to boot.
I just soft reset and press them and it always works for me.
Click to expand...
Click to collapse
That's right! Thank you Bruce Inman, IT WORKS!
But the ArtieQ method is the one I always used... and the one that usually worked... but anyway, NOW IT WORKS! Thanks Bruce again!
Need serious help.
I ****ed upp , i think manila files wont load properly so now after pin number login my screen is blank(just backround pic).. No acces to menues. Is there a way to do a factory reset whitout using standars menus buttons?
steps to hard reset:
1. With the device turned off, press and hold the VOLUME UP and VOLUME DOWN buttons, then briefly press the POWER button.
2. Continue pressing the VOLUME UP and VOLUME DOWN buttons until you see this message on the screen:
"This operation will delete all your personal data, and reset all settings to the manufacturer default settings. Press VolUp to restore manufacturer defaults, or press other keys to cancel."
3. Release the VOLUME UP and VOLUME DOWN buttons.
4. Press the VOLUME UP button to perform the hard reset, or press any other button to cancel the reset.
Awesome!
Thanks man.. almost cried there for a sec..