Hello everyone, First off I would like to thank all of those that have posted on this site and contribute to it.
Now to my problem. Let me share a little history of how everything started.
I first rooted my MT4G about a year ago, Tried to use IcedGlacier but it was not loading properly so I used cyanogenmod 6 I believe? I wanted to try IcedGlacier but It still was not loading properly. Then when I tried to restore it would not restore properly. At this point it appeared to be bricked but bootloader still worked but the PD15img file was not found. So after some researched I downloaded it and it restored my phone back to factory condition. Now I want to try other roms again because I'm getting bored of stock and attempting to load different kernels but this is where my issues are beginning.
As you can see in the attached photo that is what the bootloader looks like. I thought it was weird that next to hboot it says "HBOOT-0.85.2007 (PD1510000)".
(I tried to post the image but since I'm a noob I and unable. If you want to see the screen shot of my bootloader just message me.
I was thinking maybe this is a reason as to why now No other rom but the stock one will load. Also what is weird is that when it goes into bootloader it still says PD15img is not found but the phone will start up fine with the stock rom.
The phone remains rooted but No Rom or Kernel will Load and fully install.
When It loads roms it goes to install it shuts off and reboots into stock rom.
I tried to Use the PD15IMG.zip on the SD card to see maybe if it didn't load properly but it will begin to load with the blue bar in the corner but then after it goes all the way up nothing else happens.
I have been trying to look for answers but haven't found any real answers that help me fix my problem.
So if someone can help me I would greatly appreciate it.
The "no PD15IMG.zip" message is supposed to appear. When the bootloader loads, it checks the root of your SD for that file, and if it's not there, you'll get that message. Nothing wrong with that.
Since you're perm-rooted and running the engineering boatloader, you just need to make sure your recovery image is good. If you haven't already, download ROM Manager from the Market and use that to install a fresh copy of ClockworkMod recovery. From there you should be good to flash any ROM you want.
Thanks, I did what you said plus I realized when I was downloading the roms using a Mac and my Mac would unzip the file automatically and trying to compress it back to a zip doesn't work at all. But thanks alot for the help!
If the PD15IMG.zip doesnt work you probably dont have the part7-xxxxxxxxxx.zip file on your sdcard
Sent from my HTC Glacier using XDA Premium App
Hi there,
I had been umming and arring about rooting and installing a new ROM one of my familys HTC Heroes for some time now and finally after reading lots of "How to's" on lots of different forums I decided to take the plunge and give it a go using the guide on here.
Both my wifes phone and my sons phone are sim unlocked Orange HTC Heros running 2.1-Update 1.
Rooting it was easy. One press of a button and I was there. Its pretty much worked OK and I have sucessfully made three backups of the wifes Hero.
My main query and this is the bit I have not really been able to find much info about despite spending a day trawling through the forums looking for similar queries is this:
Having flashed my recovery image file, the first time I reboot I can get into the recovery mode just fine. From here I can make a backup of the current ROM after which the Hero reboots and goes back into the OS as it should.
If I then shut it down and reboot using the HOME key + POWER option It does not go into the recovery mode. I get the screen with an image of the phone next to a red triangle with an exclamation mark in it.
Using the advice from various forums whilst searching for further advice / hints I have left the phone for up to half an hour but it stays on this screen. The only way to get it out of this screen it to pull the battery.
If I then boot up the phone and reflash the recovery image, I can then get into the recovery mode once again but for ONE BOOT ONLY.
I have tried AmonRA Revcovery v1.7.01. and also the Clockwork Recovery 2.5.0.7 images and both produce the same results. I have tried flashing the images via ROM Manager and also via Android Terminal Emulator
My question is this: Do I have to flash the recovery image EVERY time I want to open the recovery mode or is there something I have missed? At present I have held back from installing a new ROM in case I go past a point of no return where I brick the phone. Neither my wife or son would be too pleased despite my son wanting a better ROM on his.
Apologies for writing "War and Peace" but I wanted to make sure I had covered all I could and hope this is a) not a query already posted elswhere which I have missed b)posted in the right place. Apologies to any forum mods if its not.
Regards
Rhinestone.
hmm look on the unlokr.com or something like that. They use some simple passes and it's the way i did it. the on;y difference is that my phone wasn't blocked on a carrier...
1.there is a program that roots the hero's rom
2.after that i recommend installing clockwork recovery mode (it doesn't need signed zips)
3.if you don't feel safe doing this, i recommend to stop... I know that the 2.1 rom is boring but you can end up with a bricked phone after this...
The official 2.1 update has a script that reflashes the stock recovery every time the phone is shut down.
Hunt about for a modified 2.1 rom, all of them have had that script removed. I'm not a huge fan of sense now, but when I did use it, I found villainrom to be a good 2.1 sense rom.
TheReverend210 said:
The official 2.1 update has a script that reflashes the stock recovery every time the phone is shut down.
Hunt about for a modified 2.1 rom, all of them have had that script removed. I'm not a huge fan of sense now, but when I did use it, I found villainrom to be a good 2.1 sense rom.
Click to expand...
Click to collapse
This, just flash a custom ROM and it will stick.
Hello,
Problem might be with rooting, possible it has not been rooted completely or anything messed up. You can try this for rooting.
http://unrevoked.com/
If you are sure its rooted completely, then check out Superuser apps, if its there, and you are rooted, if not then download terminal emulator and type "su" command, if its doesnt display any error then its rooted.
Other then this,
problem might be with the recovery images you are flashing, download droid explorer its a window application, its has an option of flashing recovery with one click, simply choose recovery image & flash it, clockmod recovery or amonr any of this you can get in xda.
Hello, xda-developers,
I have a myTouch 4G that was updated to the 2.3.4 Gingerbread software and wanted to root it. In order to do so, after many research, it states that there is no root for the 2.3.4 Gingerbread software and for it to be rooted you'll have to downgrade it.
The reason why I wanted to root it is because I am having a problem with the WIFI connectivity in my home and was wondering if it will fix it. Same reason why I update it to the 2.3.4 Gingerbread software in the first place. The myTouch 4G that I have will "RARELY" connect to my wireless router in my home but for some reason it doesn't fail me when connected to other wireless routers outside of my home even when having the same router. But this is now not the problem.
As you can read, the title says it all. My problem now is that I just soft bricked my myTouch 4G after a downgrade that I followed here: http://forum.xda-developers.com/showthread.php?t=1178912# Like the noob always say when something goes or went wrong, "Boohoo, I don't know what I did wrong. Someone, please, help me." But I THINK I know what I did or went wrong.
I followed the guide strict and carefully hoping I don't brick it but then I said to myself, "It's a 99.9% chance I won't, I think... what can possibly go wrong?" Everything went well. I did everything it says and once the update bar fills up to the top, BAM! It hits the "T-Mobile myTouch 4G" boot screen. I was happy. Very happy because I felt accomplished and one step closer to excitingly freeing my phone. But my hopes went down when it stayed like that for hours on end. I pulled the battery out and reboot it and nothing was fixed. Although it was stuck, I still can access the bootloader. I pulled out the battery again and boot it to the bootloader and re-updated it again and nothing was fixed. I yanked out the battery one last time and deleted the PD15IMG.zip file from the SD card to keep it from asking to update everytime I boot it to the bootloader so I can factory reset it but, still, that didn't help.
Like I said. I think I know what I did or went wrong. Examine the guide. The "Gaining Temp Root" part I did right. The "Changing Version Number to Allow Downgrade" I did correct and the results on the command prompt came out the way it stated it should come out. THEN! I yanked out the battery to reboot it after that. When I've done so I continued to the next procedure and everything went how it says it should go but, instead of the end results, I got it stuck on the "T-Mobile myTouch 4G" boot screen after the update. I think that's where I messed up. When I yanked out the battery to reboot it after the "Changing Version Number to Allow Downgrade" part. I believe it kicked it out from root. It is a temp root by the way and I read it somewhere that said, "Once you're rooted you CAN downgrade it." Something like that which made me think it wasn't rooted after that reboot and the downgrade wasn't a success. I also have two other guesses in which I think soft bricked the phone. I either have a bad eMMC-boot or the PD15IMG.zip was bad. These are my thoughts in what went wrong. I'm asking for your help. So can you help me find the solution to this problem?
Thank you very much in advance for your time and effort into reading this and helping me out. I really appreciate it.
-Victor​
P.S. Here's the information on the myTouch 4G's bootloader:
GLACIER PVT SHIP S-ON
HBOOT-0.89.0005
MICROP-0429
RADIO-26.03.02.26_M
eMMC-boot
Apr 14 2011,13:18:22
Again, Thank you.
wow, same thing happened to me.
You could try updating it back up to the 2.3.4 RUU. If that works, nothing lost at least.
You used a wrong PD15IMG, most probably.
If you have used the correct one, your bootloader would be 0.86.0000, but it isn't.
Please re-download the correct PD15IMG and try again. When it works, if it throws any messages - write them here, so someone will be able to help you. If you see "Fail-PU" - your phone is dead.
Your mistake might have been removing the battery instead of typing "adb reboot bootloader". Yanking the battery off a working phone can destroy its eMMC. If that's what happened to you - well, you can replace your phone under warranty and follow the instructions better next time.
It was definitely the part where you yanked out your battery. You lost temp root then. Why you did it, not sure. But it's already been done so Let's not linger.
Have you tried starting over from step one?
Sent from my HTC Glacier using XDA App
You used a wrong Rom to downgrade or it is corrupted during download.
Download the official 2.2.1 rom, put it to the root of your sdcard, and try to update.
The original bootloader is 0.86.0000
You can download it here
Rename it to PD15IMG.zip before updating.
Do what he said
Do what the last guy said and rename the image and flashing.
Here is what has happened, you were probably installing a signed downgrade to a previous version. Either you got the wrong file, your download was corrupt (THANKS TO CHROME), or you didn't clear your cache dalvik needs to be clear if you run a different kernel. The main cause of hanging at the bootscreen is the incorrect cache either regular or dalvik. Thats what I've noticed from threads and just in general.
You don't appear to be running clockworkmod recovery. If you are going to mess with the system, DO IT ALL THE WAY! Don't get confused with this one... if you are planning to write radios, flash updates, or do anything YOU WILL NEED ROOT. This is because something could go wrong and you could be locked out. If you aren't willing to commit to basic root privileges, do not attempt to downgrade. Either go all the way, or don't go at all. That's just some friendly advice cause people will make the misconception if they just downgrade thats fine, but getting root is more dangerous... not true! If you have root, you can actually gain control of the phone and restore even a 'broken' one.
ROOT is mostly gained from within the phone in the operating system. You use an APP to gain root privileges. Once you get root, you need to get SU a program to grant privileges to programs that request them. Then you need to get clockworkmod rom manager so you can flash a recovery (internet and market access is required unless you can install from the .apk and use adb). ONCE YOU HAVE THAT RECOVERY you can downgrade, upgrade, flash, flex, backup, restore all with a simple push of a button, no expertise required!!
You can even revert to stock easier when you have root.
Once you get that recovery installed then look for ways to turn s-off and unlock your sim so you don't have to worrry about stuff.
And remember, they might not honor your replacement phone if you hack or modify it... but if you lose the phone they will replace it for you.
Big Thanks For the Help!
Hello, xda-developers,
Thank you, all, for your help! I've figured out the problem.
It was because of the PD15IMG.zip file. It was a bad one and I figured it out by downloading another one BUT, instead of downloading it from the same site I got it from, I downloaded it from a different site. I've barely figured this out and I could have fixed this problem way earlier if I had checked back my post.
Big thanks, again, to you guys for taking your time and helping me figure out this problem. It has been a month since I've been "Android-less" and now I am going to treasure it more than usual and I can not lie... I miss its awesomeness.
My phone is now back and it is officially perm-rooted! Love this phone more than ever with all the things it can do now. Rocking this phone out now with the Virtuous Unity rom and it blows... me... away!
-Victor​
Well..... at last you figured it out.....Iam happy for you....Try Virtuous Unity 2.39 you will really love it.
By the way, where did you get the PD15IMG.zip file???? Can you post the link, so that it will be easy for others with similar problem.
Thanks! You're right, I am trying out Virtuous Unity 2.39 right now and I love it. I was actually looking for an android "bone-stock" gingerbread rom but I can't seem to find one without the customization. Then I bumped into this one. They say sense 3.0 were only made to work on dual-core phones... they were wrong. I really love this rom and I'm sticking to it. Until I find a stock gingerbread rom that has been perfected for the myTouch 4G. You know, the one without the customization.
Oh! Here's the link where I got the radio (PD15IMG.zip) from: www1240.megaupload.com/files/89ce9e2eeb86bb659eceb64baa356c4b/PD15IMG.zip
Since I'm a new member of the xda-developers forum, I couldn't post a link. So, instead, here's the address.
So have you tried the link in my post? Did it work for you?
The link for the PD15IMG.zip radio? Nope. I went onto googling it and finding one myself. The link for the stock myTouch 4G 2.3.4 rom? Nope. Not a big fan of the myTouch 4G's overlay.
Hello Noob here.
Yesterday I decided to sell my Nook Color on Craigslist since I rarely use it now. Well, today, the buyer wanted me to set it back to original stock which I agreed to thinking it would be a piece a cake. Wrong! Now I have potentially bricked my Nook Color and here I am at this forum praying that someone will be able to assist.
Here's some information on what I have and what I did and what is happening now:
I went into Clockwork Recovery and tried Restore Factory. At which point it said something like "could not locate /cache/log_in.log
I have Clockwork 3.0.0.6.
Then it got stuck on the N screen after "The feature of reading."
After getting frustrated for hours, I got desperate and downloaded a zip file named something like "stock rom 1.2 rom signed" and installed it using Clockwork.
Now I'm stuck on the "Read Forever" screen..... and can't even access Clockwork!!
Is there any hope to fix my Nook Color? I just would like to have it operational again, whether it be stock or rooted.
Okay, I just made a bootable ClockworkMod Recovery 3.2.0.1, but am struggling to find a stock rom file since most of the links in guides I've come across do not work. Help me!
Never mind. After hours of painful research, I've managed to update it to 1.4.2 and remove CMR after. Sorry for any inconvenience.
Hi guys, last month i receive an old tattoo from my sister. I was trying to update it to CyanogenMod 7 using the official guide in the cyanogenmod wiki, but for some reason it wasn't working. It gave me a lot of errors and i started looking other methods (note: rooted it before trying anything).
I think that the tattoo had something weird, cuz nothing was working. I couldn't install the clockworkmod recovery (also giving errors) so i installed another recovery called the maverick's recovery. I heard it couldn't install CM7, but i tried it anyway.
As expected, it didn't work, so i thought i could use another rom with froyo or something. I was derping around in the recovery when i saw another .zip file on the sd (not cm7). I dont know what it was, but i (yay im stupid) tried installing it anyway.
Of course, it bricked the phone
Currently, the tattoo doesn't boot, the fastboot doesn't boot, and, the recovery doesn't boot. I made a full backup at the start of all this process, but dunno what to do. I think there's no solution, but you guys are the best on this so i hope you can do something