Hey guys
After flashing MJ4 modem from official XXUDMJ6 my camera was not able to record any videos anymore.
Gave me an error and force closed a few seconds after pressing on the record button. Also happened with every other camera app.
Found a possible fix that worked for me, you might want to give it a try if you have the same issues.
What to do:
- Flash official untouched XXUDMJ6 firmware with Odin
- Reboot to download mode
- Flash XXUBMJ1 modem (get it here) via Odin 3.09
- Untick "Auto Reboot" and Flash as CP
- After flashing process is finished reboot in download mode again with 3 button combination and flash modem again (you may need to restart Odin and untick Auto Reboot)
- After flashing is done reboot smartphone
- Smartphone will start but will not ask for PIN and will have no connection, also system process will force close
- Reboot to download mode and reflash the whole untouched XXUDMJ6 firmware again
- Reboot, camera should be working now
I flashed Omega v 3.0 after this and camera still works.
Flashing non-hlos from stock mj6 should be a good solution also
Flashing NON-HLOS.bin and modem.bin wasn't enough in my case. Even adding hidden.img.ext4 and multiple factory resets didn't solve the problem and camera and WLAN kept broken.
The only solution was to include boot.img and recovery.img from the unmodified Samsung tar-file.
Create a tar.md5 including the following files:
NON-HLOS.bin
boot.img
cache.img.ext4 <- created by Universal RDLV
hidden.img.ext4
modem.bin
recovery.img
system.img.ext4 <- created by Universal RDLV
DO NOT INCLUDE THE .MDB FILES!!! DO NOT INCLUDE UNMODIFIED system.img.ex4!!!
Use Odin from the RDLV-Bundle to flash that tar.md5 file and you will be fine. I'm on OXAUDMJ6 now with Knox-Flag 0x0 and working root, camera and WLAN.
Additionally I changed my region from XEF (France) to BTU (UK) with "Galaxy CSC Changer" (PlayStore) to match the region of the CSC file - but that step should be optional.
Using the wrong CSC doesn't change the Knox-Flag - I had to do it to change from XEF to BTU, because they are not in the same multi.csc file.
edit:
I finally managed now to flash DBT NB4 with PIT..
Hello guys,
I have some problems with my N9005.
First problem:
I tried to update my bootloader, also modem witn Odin 3.09
BL: NA6
Modem: NA2
Tried to update bootloader to ND5, also tried modem to NC2. I used key combo to get into download mode.
Auto Reboot and F Reset Time ticked, nothing else. Tried one by one, first BL with BL tab, modem with CP tab
Nothing changed after reboot... still NA6 and NA2
I also used mobile odin, skips modem cuz of write protection. This also is readable in download mode.
Second problem:
After every reboot (normal, recovery, etc.) the time is reset, you have to config manually or let it grab frome time-servers.
Annoying...
Can anyone help me?
Can anyone help me?
I tried to flash N9005XXUENB7_N9005DBTENB2_N9005XXUENB1_HOME.tar.md5 with PDA tab now, with hidden.img it stopped with FAIL (size)
So I used the pit file for DBT and tried again, still FAIL! (Size)
Note 3 now starts only to download mode with firmware upgrade error warning...
edit:
I finally managed now to flash DBT NB4 with PIT..
Sometimes pit file is needed for certain firmware.
http://forum.xda-developers.com/showthread.php?t=2643109
When updating bootloader and modem, u have to shutdown phone completely before the 3 combos. And do it one by one at the correct tab.
Sent from somewhere under the sky, at the corner of this rounded earth.
So, I have 2 phones - both are g900v.
one is at 4.4.2 rooted and another one is at 5, non-rooted and I can't root it, and can't downgrade as at fails at [aboot] fused 2 > Binary 1
or with some other error - basically, failing cuz odin is touching on the bootloader piece of it
So, as I understand, rooting at this point would require flashing separately AP CP CSC and Pit
1. how do I produce them?
2. which button/option in odin each file corresponds?
3. would it work better with sdk and push via cmd?
4. any way to extract these files from a stock tar file ALL_VZW_G900VVRU1ANCG_G900VVZW1ANCG_964333_REV00_user_low_ship_MULTI_CERT.tar.md5 ? I extracted files from it, but they don't look like AP CP CSC and Pit - at least don't start with AP CP CSC and Pit, as someone reported they should.
thanks.
Hi all, i've also posted this on sammobile but have had little response. I installed TWRP on my S8 (G950f) and when it rebooted got stuck on the logo screen. I cannot enter recovery mode, only download mode. I've tried flashing with the latest Odin and it fails at the start with error DeviceInfo. So i installed an older version of Odin and now receive the error 'Set PIT file'. I cannot find a PIT file online for the G950f and upon reading it seems this is taken from the CSC file when 'repartition' is selected. I've done this to no avail, still 'Set PIT File' is displayed. I'm certain that the firmware is correct as it's been used before with success. For some reason this TWRP seems to have effed things up. I'm close to putting the phone on Ebay and never touching samsung again
This is my Odin log:
ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1100)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005>
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
This is my Downloading Page text:
ODIN MODE
DOWNLOAD SPEED: FAST
PRODUCT NAME: SM-G950F
CURRENT BINARY: CUSTOM
SYSTEM STATUS: Official
FRP LOCK: OFF
OEM LOCK: OFF
Secure Download: Enabled
CCIC = S2MM005 hw: 6 boot: 7 main:3C
WARRANTY VOID: 1 (0x030c)
RP SWREV: B:1 K:1 S:1
DID = 02b50c50a9c2
EVT 1.1
LOT_ID = NBV6P
CHIP_ID = 02b50c50a9c2
nASV_Table_Version: 8
nASV_Group_CPUCL0: 9
nASV_Group_CPUCL1: 8
nASV_Group_G30: 3
nASV_Group_MIF: 9
nASV_Group_INT: 9
nASV_Group_CAM_DISP: 9
nASV_Group_CP: 9
nASV_Group_PMIC: 0
nASV_Group_PMIC_CP: 0
PMIC_ID = 2(e4)
LPDDR4 manufacturer = Samsung
LPDDR4 process ver = D18
LPDDR4 size = 4gb
Have you tried https://forum.xda-developers.com/galaxy-s8/help/stuck-bootloop-flashing-aqg5-fix-t3636857 ?
Hi, i've downloaded the file mentioned but it's a zip file and there's no BL file contained within it. I can't install via recovery as my phone wont enter recovery.
holidayaddict1 said:
Hi, i've downloaded the file mentioned but it's a zip file and there's no BL file contained within it. I can't install via recovery as my phone wont enter recovery.
Click to expand...
Click to collapse
Download the BL from https://www.sammobile.com/devices/ or using https://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647
OK I've gotten somewhere (i hope). Followed your suggestion and after repeatedly pressing the Start button in ODIN have managed (somehow) to get into TWRP. However when i click 'install' the 'internal memory' displays as 0 with no option to select it.
Where do i go from here? Looks as if the internal storage is corrupt
The pit file is located in the CSC_OXM_G950FOXM1... file. Open it with winrar or 7zip and extract it.
Sjant said:
The pit file is located in the CSC_OXM_G950FOXM1... file. Open it with winrar or 7zip and extract it.
Click to expand...
Click to collapse
Do i need to exit TWRP then? I feel like i'd gotten somewhere
holidayaddict1 said:
Do i need to exit TWRP then? I feel like i'd gotten somewhere
Click to expand...
Click to collapse
Yes, you need to use Odin, or alternatively Smart Switch.
Sjant said:
Yes, you need to use Odin, or alternatively Smart Switch.
Click to expand...
Click to collapse
I've (kinda) managed to sort it!
Looked online and downloaded the files for AQF7 (just the BL and CP files) and whilst in download mode clicked start, held the 3 download buttons down again and hammered the start button in odin.. that made it boot into TWRP. However this just proved there was no partition there as the internal memory read zero.
So i downloaded the firmware for my device (XEU) and opened the CSC file with 7-zip and took out the .PIT file then in ODIN I JUST added the .PIT file and BL files. Pressed start and it worked but still only booted to the logo screen.
Next i added the AP file in ODIN and flashed that. This now went without a problem as the .PIT file had done its job repartitioning the phone.. The phone then restarted and booted to the welcome screen.
Some oddities which i don't understand are that in my Settings menu i now have an option 'T roaming' which shouldn't be there. and also a service provider option for 'KT twophone' whoever that is.
Confusing as i selected my countries (UK) XEU firmware.
My phone says 'international' on the boxes label so whether it's different firmware i'm not sure (couldn't find an international firmware on sam mobile).
*Edit..
I discovered that the additional options in the settings menu were due to me not flashing the CSC file so i reflashed all files at once (ensuring that odin had been reset first) and everythings back to normal.
Interestingly i wonder if i flashed a USA CSC file, would it give me access to the additional content available through the samsung USA store - they seem to have more AOD's, addons etc
Well Derr... because i discovered that android pay didn't work i felt like i had no option but to install TWRP... tried it, followed the instructions perfectly and it failed on DeviceInfo so now i'm back to the beginning.. stuck at the galaxy logo screen ( getting fed up of this phone now
holidayaddict1 said:
Well Derr... because i discovered that android pay didn't work i felt like i had no option but to install TWRP... tried it, followed the instructions perfectly and it failed on DeviceInfo so now i'm back to the beginning.. stuck at the galaxy logo screen ( getting fed up of this phone now
Click to expand...
Click to collapse
It got worse, however i've fixed it. I kept getting stuck in a boot loop despite having a successful flash. I just happened to check the files being flashed and realised that the BL file was the AQF7 bootloader and the other files were from my countries firmware. so i reflashed just the BL file for my country and the phone has now started
It looks as though flashing with TWRP won't work on my device for some reason as it seems to delete or corrupt the PIT. It's then a pain to get it all back working again.
Any other options to install TWRP?
Thanks
holidayaddict1 said:
I've (kinda) managed to sort it!
Looked online and downloaded the files for AQF7 (just the BL and CP files) and whilst in download mode clicked start, held the 3 download buttons down again and hammered the start button in odin.. that made it boot into TWRP. However this just proved there was no partition there as the internal memory read zero.
So i downloaded the firmware for my device (XEU) and opened the CSC file with 7-zip and took out the .PIT file then in ODIN I JUST added the .PIT file and BL files. Pressed start and it worked but still only booted to the logo screen.
Next i added the AP file in ODIN and flashed that. This now went without a problem as the .PIT file had done its job repartitioning the phone.. The phone then restarted and booted to the welcome screen.
Some oddities which i don't understand are that in my Settings menu i now have an option 'T roaming' which shouldn't be there. and also a service provider option for 'KT twophone' whoever that is.
Confusing as i selected my countries (UK) XEU firmware.
My phone says 'international' on the boxes label so whether it's different firmware i'm not sure (couldn't find an international firmware on sam mobile).
*Edit..
I discovered that the additional options in the settings menu were due to me not flashing the CSC file so i reflashed all files at once (ensuring that odin had been reset first) and everythings back to normal.
Interestingly i wonder if i flashed a USA CSC file, would it give me access to the additional content available through the samsung USA store - they seem to have more AOD's, addons etc
Click to expand...
Click to collapse
Hey mate. I am in the exact same boat as you, I am new to this and need some help. Where did you get your files, could you link them to me please? I don't know what I am meant to be doing and my back up didn't work properly so I can't even just go back to stock
HI, NEED HELP !
My Phone doesn't see my sim card and IMEI number. *#06# not working because my phone doesn't see my sim card.
I can't flash BL via odin. Just AP, CP, CSC...
Problem is "BL" I tried AP,CP,CSC without BL its work but sim card and IMEI not working...
Odin fail :
get pit for mapping
cm.bin
FAIL...!
EDIT: Phone is bootloop, KERNEL SW check fail device 2 binary 1 error...
How can I fix this?
go to service center
( Official Firmware )