Database Users

[HELP] SM-N9005 LTE 32Gb Hard-bricked (SD: partial solution - mmc_read failed)

I've been reading many threads over the last 3 days, and I can't get back my SM-N9005 LTE 32Gb.
My N9005 (Portuguese TPH) bricked doing a firmware update from 4.4.2 N9005XXUGNG1 (Portuguese TPH) to 5.0 Lollipop N9005XXUGBOB6 (Poland XEO) with Odin 3.09. Odin said success (PASS), but phone never rebooted.
Solution #1: http://forum.xda-developers.com/showthread.php?t=2531224 Thanks @msmercy42 I learned a lot from it but none of the N9005 unbrick.img worked for me.
Solution #2: http://forum.xda-developers.com/showthread.php?t=2625332 Thanks @ValenteL finally my N9005 goes into ODIN/Download mode.
However, I belive that solution #2 isn't going as smooth as it should. This is what I get when I get the phone to start from SD card:
Code:
[COLOR="Lime"]BOOT RECOVERY MODE[/COLOR]
CHECK BOOT PARTITIONS. .
COPY FROM T-FLASH. .
BOOT RECOVERY. .
WRITE 163840 sectors. .
[COLOR="Red"]FLASH WRITE FAILURE[/COLOR]
ddi : mmc_read failed
[COLOR="red"]ODIN MODE[/COLOR]
PRODUCT NAME: SM-N9005
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
REACTIVATION LOCK: OFF
KNOX KERNEL LOCK: 0X0
KNOX WARRANTY VOID: 0X1
[COLOR="Gray"]QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV: S2, T2, R2, A3, P2
WRITE PROTECTION: Enable[/COLOR]
[COLOR="Red"]UDC START[/COLOR]
And then, Odin recognizes the phone.
Now I'm able to get Odin to recognize the phone, but I can't do anything with it. I've tried:
- flashing 4.4.2 N9005XXUGNG1 (Portuguese TPH) again - FAIL (see attachments) Phone outputs two lines, after UDC START:
Code:
[COLOR="Gray"](...)
WRITE PROTECTION: Enable[/COLOR]
[COLOR="Red"]UDC START[/COLOR]
MMC: mmc_read fail
[COLOR="Red"]ODIN : flash read failure[/COLOR]
- flashing N9005XXUGBOB6 (Poland XEO) again - FAIL
- flashing PIT files (tried 3 different ones) - FAIL Phone outputs another line, after UDC START:
Code:
[COLOR="Gray"](...)
WRITE PROTECTION: Enable[/COLOR]
[COLOR="Red"]UDC START[/COLOR]
MMC: mmc_read fail
I wasn't able to get any unbrick.img from a N9005 Lollipop yet. Is this the final solution for my problem? Since I'm able to get to odin mode, shouldn't this unbrick be enough? What does it mean "mmc_read fail"?? Any help?!?! I don't know what else to do...
Thanks!!

Skactus said:
I've been reading many threads over the last 3 days, and I can't get back my SM-N9005 LTE 32Gb.
My N9005 (Portuguese TPH) bricked doing a firmware update from 4.4.2 N9005XXUGNG1 (Portuguese TPH) to 5.0 Lollipop N9005XXUGBOB6 (Poland XEO) with Odin 3.09. Odin said success (PASS), but phone never rebooted.
Solution #1: http://forum.xda-developers.com/showthread.php?t=2531224 Thanks @msmercy42 I learned a lot from it but none of the N9005 unbrick.img worked for me.
Solution #2: http://forum.xda-developers.com/showthread.php?t=2625332 Thanks @ValenteL finally my N9005 goes into ODIN/Download mode.
However, I belive that solution #2 isn't going as smooth as it should. This is what I get when I get the phone to start from SD card:
Code:
[COLOR="Lime"]BOOT RECOVERY MODE[/COLOR]
CHECK BOOT PARTITIONS. .
COPY FROM T-FLASH. .
BOOT RECOVERY. .
WRITE 163840 sectors. .
[COLOR="Red"]FLASH WRITE FAILURE[/COLOR]
ddi : mmc_read failed
[COLOR="red"]ODIN MODE[/COLOR]
PRODUCT NAME: SM-N9005
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
REACTIVATION LOCK: OFF
KNOX KERNEL LOCK: 0X0
KNOX WARRANTY VOID: 0X1
[COLOR="Gray"]QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV: S2, T2, R2, A3, P2
WRITE PROTECTION: Enable[/COLOR]
[COLOR="Red"]UDC START[/COLOR]
And then, Odin recognizes the phone.
Now I'm able to get Odin to recognize the phone, but I can't do anything with it. I've tried:
- flashing 4.4.2 N9005XXUGNG1 (Portuguese TPH) again - FAIL (see attachments) Phone outputs two lines, after UDC START:
Code:
[COLOR="Gray"](...)
WRITE PROTECTION: Enable[/COLOR]
[COLOR="Red"]UDC START[/COLOR]
MMC: mmc_read fail
[COLOR="Red"]ODIN : flash read failure[/COLOR]
- flashing N9005XXUGBOB6 (Poland XEO) again - FAIL
- flashing PIT files (tried 3 different ones) - FAIL Phone outputs another line, after UDC START:
Code:
[COLOR="Gray"](...)
WRITE PROTECTION: Enable[/COLOR]
[COLOR="Red"]UDC START[/COLOR]
MMC: mmc_read fail
I wasn't able to get any unbrick.img from a N9005 Lollipop yet. Is this the final solution for my problem? Since I'm able to get to odin mode, shouldn't this unbrick be enough? What does it mean "mmc_read fail"?? Any help?!?! I don't know what else to do...
Thanks!!
Click to expand...
Click to collapse
I think you are actually doing everything correct, the reason is probably due to a corrupted MMC chip unfortunately.
That also explains why it failed during your first firmware update.

hallydamaster said:
I think you are actually doing everything correct, the reason is probably due to a corrupted MMC chip unfortunately.
That also explains why it failed during your first firmware update.
Click to expand...
Click to collapse
:/
No solution then?...
how should I solve this problem then? new motherboard? new MMC chip? ...
Assuming the chip is gone, is there anything else I can try before going to hardware repair?
Thanks for your response...
Is there any developer that can help me?
I'm also willing on trying to use a 5.0 PIT file or a 5.0 unbrick.img if someone can manage to get me one...

Skactus said:
:/
No solution then?...
how should I solve this problem then? new motherboard? new MMC chip? ...
Assuming the chip is gone, is there anything else I can try before going to hardware repair?
Thanks for your response...
Is there any developer that can help me?
I'm also willing on trying to use a 5.0 PIT file or a 5.0 unbrick.img if someone can manage to get me one...
Click to expand...
Click to collapse
AFAIK Lollipop ROMs boot on KK bootloaders, so that shouldn't be the problem.
Have you tried just to do a factory reset and see if anything happens?
If it doesn't work, what about installing a custom recovery from DL mode?
If that works try flashing a small AOSP rom.
EDIT:
Yes, if the MMC is corrupted, a new motherboard will be needed, unless ofcourse it's possible to do any HW repairs.

hallydamaster said:
AFAIK Lollipop ROMs boot on KK bootloaders, so that shouldn't be the problem.
Have you tried just to do a factory reset and see if anything happens?
If it doesn't work, what about installing a custom recovery from DL mode?
If that works try flashing a small AOSP rom.
EDIT:
Yes, if the MMC is corrupted, a new motherboard will be needed, unless ofcourse it's possible to do any HW repairs.
Click to expand...
Click to collapse
Can't get to recovery, so no factory reset for me...
I was wondering about installing a custom rom recovery from odin on last resort... I'm still hopeful for the miracle of unbrick.img from a 5.0 to work. Than I'll call my Note 3 by "Fenix 3" instead...

Skactus said:
Can't get to recovery, so no factory reset for me...
I was wondering about installing a custom rom recovery from odin on last resort... I'm still hopeful for the miracle of unbrick.img from a 5.0 to work. Than I'll call my Note 3 by "Fenix 3" instead...
Click to expand...
Click to collapse
There is no stock recovery when you try enter?
If I were you, I would try to install TWRP recovery through Odin, then install a custom AOSP ROM.
If that works you can try test the MMC with software.

hallydamaster said:
There is no stock recovery when you try enter?
If I were you, I would try to install TWRP recovery through Odin, then install a custom AOSP ROM.
If that works you can try test the MMC with software.
Click to expand...
Click to collapse
I can only get the phone to get alive using SD card with unbrick.img on it (see post #1). Then I can get access only to ODIN mode.
Tried to flash TWRP recovery through Odin right now: FAIL.
Odin 3.09:
Code:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004>
<ID:0/004> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
Phone outputs two lines, after UDC START:
Code:
[COLOR="Gray"](...)
WRITE PROTECTION: Enable[/COLOR]
[COLOR="Red"]UDC START[/COLOR]
MMC: mmc_read fail
[COLOR="Red"]ODIN : flash read failure[/COLOR]
... it's a no go then...

Skactus said:
I can only get the phone to get alive using SD card with unbrick.img on it (see post #1). Then I can get access only to ODIN mode.
Tried to flash TWRP recovery through Odin right now: FAIL.
Odin 3.09:
Code:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004>
<ID:0/004> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
Phone outputs two lines, after UDC START:
Code:
[COLOR="Gray"](...)
WRITE PROTECTION: Enable[/COLOR]
[COLOR="Red"]UDC START[/COLOR]
MMC: mmc_read fail
[COLOR="Red"]ODIN : flash read failure[/COLOR]
... it's a no go then...
Click to expand...
Click to collapse
I see, sorry about your phone. Does indeed seem like you have a dead MMC chip.

:/ thanks for your kind help anyway...
Should I expect someone else to confirm this, get a 5.0 PIT, maybe a 5.0 unbrick.img for the microSD card trick, or are you 100% sure of that and I should stop pursuing the utopia of getting my phone unbricked?
Sent from my RIDGE 4G using Tapatalk

Skactus said:
:/ thanks for your kind help anyway...
Should I expect someone else to confirm this, get a 5.0 PIT, maybe a 5.0 unbrick.img for the microSD card trick, or are you 100% sure of that and I should stop pursuing the utopia of getting my phone unbricked?
Sent from my RIDGE 4G using Tapatalk
Click to expand...
Click to collapse
I would probably not give up either, you can say there is no harm in trying what there is to try.
Using a debrick.img from a 5.0 Android should not make a difference, but if you can find one, why not give it a try?
I have found 2 pit files you might try, AFAIK they are both recent:
http://www.4shared.com/get/lrO_9qAoce/CSB_signed_HLTE_EUR_OPEN_32G_0.html
https://hostr.co/ndxkZa6KqRTF
You can also try use the "Nand erase all" feature in Odin 3.09, but I think I've read somewhere that it requires you to have a backup of your EFS to restore properly.

hallydamaster said:
I would probably not give up either, you can say there is no harm in trying what there is to try.
Using a debrick.img from a 5.0 Android should not make a difference, but if you can find one, why not give it a try?
I have found 2 pit files you might try, AFAIK they are both recent:
http://www.4shared.com/get/lrO_9qAoce/CSB_signed_HLTE_EUR_OPEN_32G_0.html
https://hostr.co/ndxkZa6KqRTF
You can also try use the "Nand erase all" feature in Odin 3.09, but I think I've read somewhere that it requires you to have a backup of your EFS to restore properly.
Click to expand...
Click to collapse
I belive I've already tried the first one. I'm downloading them right now. ´
Can you explain further on about "Nand erase all" feature? I don't really know nothing about it, but I confess I'm a scared to use it.
EDIT: Both failed. "Re-Partition operation failed."

Skactus said:
I belive I've already tried the first one. I'm downloading them right now. ´
Can you explain further on about "Nand erase all" feature? I don't really know nothing about it, but I confess I'm a scared to use it.
EDIT: Both failed. "Re-Partition operation failed."
Click to expand...
Click to collapse
Appareantly the "Nand erase alle" setting formats the MMC, but that means you have to have a backup of EFS, else you cannot restore your IMEI... Thats what I think it was about. Sorry, about the pits, that was all I got.

Yet I can't thank you enough, since you're the only one how even tried to assist me with my problem so far!

I have another question yet... is it too late to create a EFS backup?
I've speed read some threads about Nand erase and that could eventually solve my problem.

Skactus said:
I have another question yet... is it too late to create a EFS backup?
I've speed read some threads about Nand erase and that could eventually solve my problem.
Click to expand...
Click to collapse
Unfortunately I don't think it's possible to backup the EFS without recovery/working android. So if it's deleted, you will just have another bricked stated, not being able to use it with your provider.
Have you tried just to flash a bootloader through Odin, see if that works? Or does it just quit instantly?

You need to flash with a PIT file and repartition checked. At least that's what I gathered from looking at the issue.

hallydamaster said:
Unfortunately I don't think it's possible to backup the EFS without recovery/working android. So if it's deleted, you will just have another bricked stated, not being able to use it with your provider.
Have you tried just to flash a bootloader through Odin, see if that works? Or does it just quit instantly?
Click to expand...
Click to collapse
I don't tried yet flashing just the bootloader, but i've tried to flash a bootloader among with other files, Odin Failed. Can you sugest which bootloader to flash?
So far I couldn't flash anything without Odin failing...
BTW, adb doesn't find the device either...

toastido said:
You need to flash with a PIT file and repartition checked. At least that's what I gathered from looking at the issue.
Click to expand...
Click to collapse
Thanks for your reply. I've already flashed almost 6 diferent PIT files, with and without AP, nothing worked for me so far. I belive that's because I haven't got any 5.0 PIT file yet. Would you care to share one?

Skactus said:
Thanks for your reply. I've already flashed almost 6 diferent PIT files, with and without AP, nothing worked for me so far. I belive that's because I haven't got any 5.0 PIT file yet. Would you care to share one?
Click to expand...
Click to collapse
Unfortunately I don't have one, and I'm on am n900t, so even if I pulled one it probably wouldn't help. :/ best of luck, and please keep us apprised of any progress and outcomes!

toastido said:
Unfortunately I don't have one, and I'm on am n900t, so even if I pulled one it probably wouldn't help. :/ best of luck, and please keep us apprised of any progress and outcomes!
Click to expand...
Click to collapse
Sure, If I get to solve this I'll also make a tutorial about it (I've find some guys with similar problem [mmc_read fail], but no one got to solve it yet.).

Help Bricked?? my verizon s5 ! (aboot) fused 2 > 1

I was trying to download my Verizon Galaxy S5 and got it stuck somewhere...
Now all i get when i connect anything to phone or try to boot it (into any mode is the "Software Update Failed screen. The text it displays is,
"ODIN MODE
PRODUCT NAME: SM-G900V
CURRENT BINARY : Samsung Official
SYSTEM STATUS : Official
REACTIVATION LOCK(KK): ON
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV : S1, T2, R1, A2, P1
SECURE DOWNLOAD : ENABLE
UDC START
SW VER FAIL : [aboot]Fused 2 > Binary 1
"
I've tried reading instructions on what to do for this on other threads and I can't make much sense of it. I don't know what files I should download for my device (specifically on this thread. http://forum.xda-developers.com/showthread.php?t=2784880)
Did I completely screw up my phone?
Can anybody help me get my phone back?

Been trying all night to find a solution to the same problem. My nephew did the same thing to his phone. I don't own an s5 but have gotten pretty familiar in the past several hours. We tried flashing the pit file and that at least got us a Samsung splash screen and into the stock recovery. Was never able to find anything else that would successfully flash in Odin. My guess is he was on the latest ota and didn't see the part where it won't work until he tried it. Any way, I saw someone fixed this issue on an att s5 by flashing three other tar files in Odin. Couldn't find those same files for Verizon last night. Was up till 3:00 am fighting this phone. I will let you know if it works when we get our hands on the files. And if you fix it first, please let me know.
Sent from my Nexus 6 using XDA Free mobile app

Fixed!!!
I just fixed it!
All I had to do was to flash only the .pit I got off of http://forum.xda-developers.com/showthread.php?t=2784880

How do you flash only the pit file? I'm also having the exact same issue.

TheDiddlerMan said:
How do you flash only the pit file? I'm also having the exact same issue.
Click to expand...
Click to collapse
Can you get into download mode? If you can, then use Odin to flash the pit file.

buhohitr said:
Can you get into download mode? If you can, then use Odin to flash the pit file.
Click to expand...
Click to collapse
Yeah, I'm able to get into download mode, but unfortunately flashing the .pit file didn't resolve my issue.

TheDiddlerMan said:
Yeah, I'm able to get into download mode, but unfortunately flashing the .pit file didn't resolve my issue.
Click to expand...
Click to collapse
I only show you how to flash pit file with Odin but you never tell me what's the problem with your phone?

Galaxy s5 G900FD forge HS-USB QDloader 9008 hard brick need help

Hi i got a customer bring in a Galaxy s5 G900FD that is hard brick. when i connect the phone to the PC in device manager it only show forge HS-USB QDloader 9008. I know for the harder phone like s2,s3 i can repair it with a SD card can i do the same here and if i can does anyone have the SD unbrick file or know how to fix the issues.

Guys, if someone has a SM-G900FD, please make a debrick image.

SnorLax[369] said:
Guys, if someone has a SM-G900FD, please make a debrick image.
Click to expand...
Click to collapse
I have a g900fd I want to help tell me how to make debrick image and I will upload it and post link here
---------- Post added at 10:25 AM ---------- Previous post was at 10:23 AM ----------
Whoops looks like the op is from 2015 ,still I want to make one if I get the instructions

Debrick img SM-G900FD
SnorLax[369] said:
Guys, if someone has a SM-G900FD, please make a debrick image.
Click to expand...
Click to collapse
I made a debrick image with my g900fd hope this works for you https://mega.nz/#!AyQnUQiK!v3a9pGeCHAplynq-4yZ3aISTHc0uY16SCTrIsUmDu6E

clockstoper
Thanks a lot! Works great, phone boots into "boot recovery mode" but with "flash write failure" error. Seems my emmc chip is dead.
Code:
[COLOR="Lime"]BOOT RECOVERY MODE[/COLOR]
CHECK BOOT PARTITIONS. .
COPY FROM T-FLASH. .
BOOT RECOVERY. .
WRITE 163904 SECTORS. .
[COLOR="Red"]FLASH WRITE FAILURE[/COLOR]
ddi : mmc_read failed
[COLOR="Red"]ODIN MODE[/COLOR]
PRODUCT NAME: SM-G900FD
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
REACTIVATION LOCK: OFF
KNOX WARRANTY VOID: 0x0
[COLOR="Gray"]QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV: S1, T1, R1, A1, P1[/COLOR]
[COLOR="Blue"]SECURE DOWNLOAD: ENABLE[/COLOR]
[COLOR="red"]UDC START
ODIN : flash read failure
ERROR : There is no pit binary.[/COLOR]

Hi guys, i have the same problem with my S5. Can you explain to me the step? Thanks.

federix17 said:
Hi guys, i have the same problem with my S5. Can you explain to me the step? Thanks.
Click to expand...
Click to collapse
Which of the probs do you mean?
Hard brick or emmc error?

I don't know, I think an emmc problem. I try more and more steps but nothing to do. I try to install too much firmwares with Odin but the error is the same: THERE IS NO PIT BINARY and SECURE CHECK FAIL: PIT.

federix17 said:
I don't know, I think an emmc problem. I try more and more steps but nothing to do. I try to install too much firmwares with Odin but the error is the same: THERE IS NO PIT BINARY and SECURE CHECK FAIL: PIT.
Click to expand...
Click to collapse
Using multiple part stock or all in one?
Seems as if it wants you to repartition it.
Worth a try perhaps.

Could you tell me how to do it? Thanks

federix17 said:
Could you tell me how to do it? Thanks
Click to expand...
Click to collapse
I think you mean repartitioning, right?
Hit the appropriate button in Odin.
The pit file is integrated in the CSC part of the multiple stock firmware.

Where can I find the special button in Odin? I'm sorry but I don't know what it is. I have the firmware downloaded from sammobile.

federix17 said:
Where can I find the special button in Odin? I'm sorry but I don't know what it is. I have the firmware downloaded from sammobile.
Click to expand...
Click to collapse
Dunno if it's always in the same place on different Odin versions.
Pic should show what I mean.
If not displayed search for "odin Samsung pit" pics.
Seems to me that Odin might want the pit file separately.
Either you can search for it here in XDA or extract it from your CSC file by renaming the end ( I think it was lz4) and opening the archive to copy the pit to your Odin folder on the desktop.

federix17 said:
Where can I find the special button in Odin? I'm sorry but I don't know what it is. I have the firmware downloaded from sammobile.
Click to expand...
Click to collapse
Is it multiple?

I understand what you mean by multiple file but I don't know how or with which program I can divide it and insert it in the 4 fields of Odin. I have a single file with the extension .md5.
Then how do I find the CSC file from the firmware to extract the PIT file?

You can use SamFirm tool to download stock as a multiple file.
Have to check "binary nature" box for getting it.
Otherwise it comes as one part file.
https://2.bp.blogspot.com/-pVyCTPL8...wwZ34ztOjDlgCLcB/s1600/Samifirm+Tool0.3.6.PNG

I did it but nothing to do. The same mistake. It will be a hardware problem then. Look the screen.

federix17 said:
I did it but nothing to do. The same mistake. It will be a hardware problem then. Look the screen.
Click to expand...
Click to collapse
I'm afraid you're right.
Seems to have passed away.
Sorry.

Thanks anyway for the advice, if I have updates I will share them.

...
....

Phone stuck on "Samsung Galaxy S5 .. Powered by Android" screen

So originally I had 5.0 stock firmware that was updated through Samsung Kies.
Then I started using Samsung SmartSwitch (new Kies) and it told me I had a new update. I tried installing it and it failed.
So phone was stuck and error message showed ".. update failed .." and so on.
I decided to put the phone in download mode and flash the stock firmware via Odin but no matter what I try, everything fails.
As of right now, I've read and tried multiple things. Like this:
http://forum.xda-developers.com/showthread.php?t=2784880
http://forum.xda-developers.com/verizon-galaxy-s5/help/wont-past-s5-powered-android-screen-t3225682
When I go to download mode on the phone, here is what reads on the top left:
ODIN MODE
PRODUCT NAME: SM-G900V
SYSTEM STATUS: Official
REACTIVATION LOCK(KK): OFF
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV: S1, T2, A1, A2, P1
SECURE DOWNLOAD : ENABLE
UDC START​
The following guide shows very good instructions with all the files but I am unsure of which version I should be using or even the file for that version since there are SOO MANY files there. http://forum.xda-developers.com/showthread.php?t=2784880
A little detail answer would really be appreciated.
Thank you!!

s.thepatel said:
So originally I had 5.0 stock firmware that was updated through Samsung Kies.
Then I started using Samsung SmartSwitch (new Kies) and it told me I had a new update. I tried installing it and it failed.
So phone was stuck and error message showed ".. update failed .." and so on.
I decided to put the phone in download mode and flash the stock firmware via Odin but no matter what I try, everything fails.
As of right now, I've read and tried multiple things. Like this:
http://forum.xda-developers.com/showthread.php?t=2784880
http://forum.xda-developers.com/verizon-galaxy-s5/help/wont-past-s5-powered-android-screen-t3225682
When I go to download mode on the phone, here is what reads on the top left:
ODIN MODE
PRODUCT NAME: SM-G900V
SYSTEM STATUS: Official
REACTIVATION LOCK(KK): OFF
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV: S1, T2, A1, A2, P1
SECURE DOWNLOAD : ENABLE
UDC START​
The following guide shows very good instructions with all the files but I am unsure of which version I should be using or even the file for that version since there are SOO MANY files there. http://forum.xda-developers.com/showthread.php?t=2784880
A little detail answer would really be appreciated.
Thank you!!
Click to expand...
Click to collapse
were you already rooted? if not then you cant downgrade due to the bootloader being locked

i need some Help at S7 Edge FRP Lock

Hello, i got an S7 Edge.
Its FRP locked and on Android 8.0.
What do i have to do? Downgrade to ? 7 / 6 to unlock it with the Bluethooth Method?
And what Bootloader do i have? is it too high to downgrade?
Which Rom should i flash?
ODIN MODE
Download SPEED: FAST
PRODUCT NAME : SM-G935F
CURRENT BINARY : Samsung Official
SYSTEM STATUS: Official
FRP LOCK : ON
Secure Download : Enabled
Warranty VOID: 0 (0x0000)
AP SWREV: B:3 K:1 S:2
Android Recovery says:
samsung/hero2ltexx/hero2lte
8.0.0/R16NW/G935FXXS3ERHD
thanks a lot
greets from germany

download original rom and flash with ODIN
i used this rom yesterday happen with me also
BTU-G930FXXU2ERD5-20180502100231
its only for G930F

AlbertXDA069 said:
Hello, i got an S7 Edge.
Its FRP locked and on Android 8.0.
What do i have to do? Downgrade to ? 7 / 6 to unlock it with the Bluethooth Method?
And what Bootloader do i have? is it too high to downgrade?
Which Rom should i flash?
ODIN MODE
Download SPEED: FAST
PRODUCT NAME : SM-G935F
CURRENT BINARY : Samsung Official
SYSTEM STATUS: Official
FRP LOCK : ON
Secure Download : Enabled
Warranty VOID: 0 (0x0000)
AP SWREV: B:3 K:1 S:2
Android Recovery says:
samsung/hero2ltexx/hero2lte
8.0.0/R16NW/G935FXXS3ERHD
thanks a lot
greets from germany
Click to expand...
Click to collapse
Downgrade Binary 3 is not possible
AP SWREV: B:3 K:1 S:2 (B:3 is your binary)
Yo can try using combination file metod for dissable OEM Lock

Google FRP is pretty tough. It uses a different partition for storing lock status. so flashing DATA partition (Factory reset, Wiping, etc) wont work. Also flashing system partition (flashing a new rom into system partition, Updating rom, etc) wont work. This tool may worth checking out.
FRP bypass apk

eriktirador said:
Downgrade Binary 3 is not possible
AP SWREV: B:3 K:1 S:2 (B:3 is your binary)
Yo can try using combination file metod for dissable OEM Lock
Click to expand...
Click to collapse
Thank you, could you send me a Link for the right Combination file?
thanks

AlbertXDA069 said:
Thank you, could you send me a Link for the right Combination file?
thanks
Click to expand...
Click to collapse
https://forum.xda-developers.com/s7-edge/help/file-combination-firmware-binary-3-t3853926
Flash it in AP via Odin

eriktirador said:
https://forum.xda-developers.com/s7-edge/help/file-combination-firmware-binary-3-t3853926
Flash it in AP via Odin
Click to expand...
Click to collapse
Thank you very much, ill try it later when i get home from work:fingers-crossed:

https://forum.xda-developers.com/s7-edge/how-to/how-to-remove-frp-lock-guide-t3855793 I MADE THIS GUIDE