After rooting my phone, I cannot connect to any wifi connections. I turn wifi on, and it doesn't see my router and just turns off.
Any suggestions?
lazerus06 said:
After rooting my phone, I cannot connect to any wifi connections. I turn wifi on, and it doesn't see my router and just turns off.
Any suggestions?
Click to expand...
Click to collapse
If you have flashed patched boot.img for SuperSu root. You also need to flash one more file named as wlan_custom.zip.
rayzen6 said:
If you have flashed patched boot.img for SuperSu root. You also need to flash one more file named as wlan_custom.zip.
Click to expand...
Click to collapse
I did that and no wifi after.
I restored to factory and all is good now.
wifi not working after supersu root
wlan_custom.zip flashed but no use..pls fix..thank u
pls explore more, how u rooted?
lazerus06 said:
After rooting my phone, I cannot connect to any wifi connections. I turn wifi on, and it doesn't see my router and just turns off.
Any suggestions?
Click to expand...
Click to collapse
pls explore more, how u rooted?
Mine is working great, may be you flashed Supersu instead of Magisk Manager
Related
Hi, im facing a wifi issue on CM10 (i flashed from v10k). 3g seems to work fine, but everytime i try to connect with wifi - it just goes "enabling wifi", and nothing happens - then wifi ON/OFF switch goes to gray.
Anyone with the same issue or know how to solve it perhaps?
Cheers!
I notice i have same error but my rom is cyanmod last version!i have installed first, v10k with bootloader unlocked an rooted and then from cwm recovery i have reset default settings .Now i can't open wifi,only a grey buton.
Sent from my LG-P700 using xda premium
I found the solution for this issue:you moust reinstal in cmw recovery baseband v10k.
https://www.dropbox.com/s/75t4nkabaymdb9s/v10Baseband.zip
Credits to a russian people from 4PDA.Me just reuploaded.
Sent from my LG-P700 using xda premium
are you downgraded from V20 to CM10?
maybe you should flash the baseband
I've instaled v20d when apperead,but i use this stock rom about 1-2 days.After this terrible experience i've instaled cyanmod and v10k baseband.My problem with wifi started when i've instaled v10k(Homero zip version), then cyanmod.
Sent from my LG-P700 using xda premium
CM10 Wifi / 3G
Hi all,
I just flashed CM 10 to my p700 and now my wifi and 3g aren't working at all.
I tried to setup my APN several times but these settings can't be saved for some reason.
When pressing the WIFI icon it shows that it is turned on but it isnt receiving or transmitting (I can't see it in my home network.)
Next step is going back to V20D_00_m
MJBBRU said:
Hi all,
I just flashed CM 10 to my p700 and now my wifi and 3g aren't working at all.
I tried to setup my APN several times but these settings can't be saved for some reason.
When pressing the WIFI icon it shows that it is turned on but it isnt receiving or transmitting (I can't see it in my home network.)
Next step is going back to V20D_00_m
Click to expand...
Click to collapse
Hello,install baseband in CWM recovery(Look up,i posted this baseband).
bogdan109 said:
Hello,install baseband in CWM recovery(Look up,i posted this baseband).
Click to expand...
Click to collapse
I tried to get in CWR but somehow it doesn't work.
I will give it another try with your baseband.
First I need to get in CWR mode.
But thanks :good:
MJBBRU said:
I tried to get in CWR but somehow it doesn't work.
I will give it another try with your baseband.
First I need to get in CWR mode.
But thanks :good:
Click to expand...
Click to collapse
If you instaled cyanmod,you can enter in recovery.Steps are:
1.Turn off the phone
2.Keep push Home +VUPVOLDOWN(center) +Power
Phone will vibrate an CWR appears.
I tried this key combination but it didn't work.
Just flashed to V20D_00_m by KDZ
Now it doesn't get past the lg boot screen i'll fix this first.
In the end I want to run CM10 on this device.
MJBBRU said:
I tried this key combination but it didn't work.
Just flashed to V20D_00_m by KDZ
Now it doesn't get past the lg boot screen i'll fix this first.
In the end I want to run CM10 on this device.
Click to expand...
Click to collapse
Belive me,Cyanmod is much better.If you whant to pass boot logo,must hard reset phone .Here: :good:http://www.hard-reset.com/lg-optimus-l7-p700-hard-reset.html
bogdan109 said:
Belive me,Cyanmod is much better.If you whant to pass boot logo,must hard reset phone .Here: :good:http://www.hard-reset.com/lg-optimus-l7-p700-hard-reset.html
Click to expand...
Click to collapse
And yes there was the CWM recovery screen.
Thanks for your assistance:good::good:
I'm learning it the hard way.
Update: Currently running CM10
MJBBRU said:
And yes there was the CWM recovery screen.
Thanks for your assistance:good::good:
I'm learning it the hard way.
Update: Currently running CM10
Click to expand...
Click to collapse
3G and WIFi work now?
bogdan109 said:
3G and WIFi work now?
Click to expand...
Click to collapse
Yes they do :good::good:
Now It's importing my data from google even if I turn off WIFI
Thanks again
MJBBRU said:
Yes they do :good::good:
Now It's importing my data from google even if I turn off WIFI
Thanks again
Click to expand...
Click to collapse
For Backup an restore i use Wondershare MobileGo for Android.Is a good program.I recomand you.
Cheers!:good:
my rooted G2 with stock 4.2 suddenly quit accepting a charge and appears to be caught in a boot loop. when I have it in via usb to my laptop it (laptop) responds by recognizing 12 different devices while saying they they all need to be reformatted. when I unplug the device they go away on the laptop. when I hold power (device) the LG logo will appear then quickly disappear leaving only the very dim backlight as proof that it isn't completely dead. any ideas? thank you
one more thing, the fiddling I have been doing is xposed modules. the last one I think I activated was xblast tools (very cool sh*t by the way).
You need to flash the xposed disable zip that's automatically put on the root of the storage directory. The latest module or change you added is most likely the cause. After flashing the zip, you'll need to reinstall xposed. Remember to disable the module that caused the bootloop.
Sent from my phone using some app
You dun got ATT'ed.
They're pushing OTA's out without asking now.
http://forum.xda-developers.com/showthread.php?t=2647654
Do one thing flash the .tot file for your phone if you can get to download mod, it should bring it back to factory defaults but it will format your sdcard as well so all personal data will be gone.
Here is the link to instructions:
http://www.droidviews.com/how-to-restore-lg-g2-to-stock-firmware/
se1988 said:
You need to flash the xposed disable zip that's automatically put on the root of the storage directory. The latest module or change you added is most likely the cause. After flashing the zip, you'll need to reinstall xposed. Remember to disable the module that caused the bootloop.
Sent from my phone using some app
Click to expand...
Click to collapse
I can flash even though I can not enter download mode?
abhinav.tella said:
Do one thing flash the .tot file for your phone if you can get to download mod, it should bring it back to factory defaults but it will format your sdcard as well so all personal data will be gone.
Here is the link to instructions:
http://www.droidviews.com/how-to-restore-lg-g2-to-stock-firmware/
Click to expand...
Click to collapse
I cannot enter download mode I'm afraid.
khaytsus said:
You dun got ATT'ed.
They're pushing OTA's out without asking now.
http://forum.xda-developers.com/showthread.php?t=2647654
Click to expand...
Click to collapse
What exactly do you mean? I glanced at the link and either your joke went right over my head or I missed it in the lot her thread.
pollutedmuse said:
I can flash even though I can not enter download mode?
Click to expand...
Click to collapse
can't you enter recovery?
If you can't enter recovery or download mode, you have a softbrick. Search on how to solve softbrick issues. Im sorry I cant help you any further if it is a softbrick, as I am completely new to LG
se1988 said:
can't you enter recovery?
If you can't enter recovery or download mode, you have a softbrick. Search on how to solve softbrick issues. Im sorry I cant help you any further if it is a softbrick, as I am completely new to LG
Click to expand...
Click to collapse
Do you mean hard brick?
pollutedmuse said:
my rooted G2 with stock 4.2 suddenly quit accepting a charge and appears to be caught in a boot loop. when I have it in via usb to my laptop it (laptop) responds by recognizing 12 different devices while saying they they all need to be reformatted. when I unplug the device they go away on the laptop. when I hold power (device) the LG logo will appear then quickly disappear leaving only the very dim backlight as proof that it isn't completely dead. any ideas? thank you
one more thing, the fiddling I have been doing is xposed modules. the last one I think I activated was xblast tools (very cool sh*t by the way).
Click to expand...
Click to collapse
When you plug it into your computer do you see a yellowed out device in Windows device manager?
If so try this - http://forum.xda-developers.com/showpost.php?p=48361867&postcount=68
or alternately, install the pdanet drivers.
If you can then get adb access to your device there are several paths you could take.
I used this thread (I had recovery but not twrp), as it's the least destructive - http://forum.xda-developers.com/showthread.php?t=2451696
If you can't get adb access with either single sooner or pdanet drivers, you may have to resort to this..
http://forum.xda-developers.com/show....php?t=2582142
(actually kind of sounds like fun to me)
pollutedmuse said:
Do you mean hard brick?
Click to expand...
Click to collapse
No, hard brick is when the device won't even turn on. OPs device turns on, but is stuck in limbo.
se1988 said:
No, hard brick is when the device won't even turn on. OPs device turns on, but is stuck in limbo.
Click to expand...
Click to collapse
Oh, F'n sweet! Thank good sir! I am gonna work on your advice immediately.
CxanDroid said:
When you plug it into your computer do you see a yellowed out device in Windows device manager?
If so try this - http://forum.xda-developers.com/showpost.php?p=48361867&postcount=68
or alternately, install the pdanet drivers.
If you can then get adb access to your device there are several paths you could take.
I used this thread (I had recovery but not twrp), as it's the least destructive - http://forum.xda-developers.com/showthread.php?t=2451696
If you can't get adb access with either single sooner or pdanet drivers, you may have to resort to this..
http://forum.xda-developers.com/show....php?t=2582142
(actually kind of sounds like fun to me)
Click to expand...
Click to collapse
Thank you my friend!
pollutedmuse said:
Oh, F'n sweet! Thank good sir! I am gonna work on your advice immediately.
Click to expand...
Click to collapse
Good luck!!
Sent from my phone using some app
I rooted my nae phone n then pushed the files n now when I update apps they crash like Twitter in order for then to work I have to go back to stock hotspot then re push the modded files
Sent from my SPH-L720 using xda app-developers app
Anyone ? Like when a app updates it stops working with the hotspot mod
Sent from my SPH-L720 using xda app-developers app
13jkilgo said:
Anyone ? Like when a app updates it stops working with the hotspot mod
Sent from my SPH-L720 using xda app-developers app
Click to expand...
Click to collapse
Same problem here, I flashed 4.4 to my phone via ODEN, then did an autoroot. Installing / updating apps works fine. After doing the hotspot mod, any apps that are updated or downloaded will crash when you try to open them.
Hope there is a fix soon
Yeah I know I still haven't figured it out other than I just have to pull the files out n repush the stock files to update apps
Hopefully soon
Sent from my SPH-L720 using xda app-developers app
I had this same issue with NAE hotspot files. CFautoroot worked fine... phone is cool until I installed the hotspot mod files. Every app that updated would become inop with the unfortunately this POS app has crashed and now I going to give you the middle finger etc..etc.... All the apps had the same details in the error report. Had to Reflash NAE because it got so bad I couldn't get to file explore to replace the modded service files. I was applying the hot spot mod by replacing the files using a file explore app.
I installed TWRP to try the recommended method of installing by flashing the .zip through recovery and havn't had a single issue since
Stock 4.4.2 (NAE)
rooted with CFautoroot
TWRP installed through goomanager
rpm429 said:
I had this same issue with NAE hotspot files. CFautoroot worked fine... phone is cool until I installed the hotspot mod files. Every app that updated would become inop with the unfortunately this POS app has crashed and now I going to give you the middle finger etc..etc.... All the apps had the same details in the error report. Had to Reflash NAE because it got so bad I couldn't get to file explore to replace the modded service files. I was applying the hot spot mod by replacing the files using a file explore app.
I installed TWRP to try the recommended method of installing by flashing the .zip through recovery and havn't had a single issue since
Stock 4.4.2 (NAE)
rooted with CFautoroot
TWRP installed through goomanager
Click to expand...
Click to collapse
Do you have to be unlocked to use TWRP or can i just install it straight from the play store??
thanks!
13jkilgo said:
Do you have to be unlocked to use TWRP or can i just install it straight from the play store??
thanks!
Click to expand...
Click to collapse
I figured it out thanks for the help! disregard the comment above
Figured out how?
13jkilgo said:
I figured it out thanks for the help! disregard the comment above
Click to expand...
Click to collapse
you wanna share how you figured it out? can you install straight from the play store?
SteveAnthonyL20 said:
you wanna share how you figured it out? can you install straight from the play store?
Click to expand...
Click to collapse
you have to download goomanager in the play store first and watch this video how to install TWRP
video - http://www.youtube.com/watch?v=bBQTx8FmTtk
Hotspot mod files - http://forum.xda-developers.com/showthread.php?t=2653666
and then get the zip file for the hotspot mod and put it onto your external sd and go to recovery mode and hit install and then find
your file on your sdcard and swip to install.
Remember to always create a nandriod backup first before flashing the mod!
Hope that helps!
13jkilgo said:
you have to download goomanager in the play store first and watch this video how to install TWRP
video - http://www.youtube.com/watch?v=bBQTx8FmTtk
Hotspot mod files - http://forum.xda-developers.com/showthread.php?t=2653666
and then get the zip file for the hotspot mod and put it onto your external sd and go to recovery mode and hit install and then find
your file on your sdcard and swip to install.
Remember to always create a nandriod backup first before flashing the mod!
Hope that helps!
Click to expand...
Click to collapse
Will I be able to install this recovery successfully on 4.4.2, I have successfully rooted but I am on Baseband: L720VPUFNAE...I am guess the NAE hotspot hack but I am not totally sure which hotspot file to get.
SteveAnthonyL20 said:
Will I be able to install this recovery successfully on 4.4.2, I have successfully rooted but I am on Baseband: L720VPUFNAE...I am guess the NAE hotspot hack but I am not totally sure which hotspot file to get.
Click to expand...
Click to collapse
yeah you can install the recovery successfully and and your phone is odexed if its a stock rooted rom unless its a custom rom then it would be deodexed
13jkilgo said:
yeah you can install the recovery successfully and and your phone is odexed if its a stock rooted rom unless its a custom rom then it would be deodexed
Click to expand...
Click to collapse
Ok, my apologies, but were the past couple posts directed to the main issue? I got a lil thrown off, but assuming liek everyone else, I am no longer able to open newly installed apps. I can get as far as installing them. But when i try to open them, it force closes " Unfortunately, BlahBlah has stopped ". This be resolved or still a wondering issue?
Resolved by flashing the mod thru twrp recovery basically use Odin and put the twrp tar in pda n flash that and after that is done put the hot spot zip file on your sdcard Then go into recovery n hit install find the zip file and let it install
Sent from my SPH-L720 using xda app-developers app
HotSpot won't activate
I have used root explorer to copy hotspot hack file to framework, then I was getting app crash so flashed stock firmware L720VPUFNAE. Now I am rooted again when I try to turn on hotspot it turns on without notification that "hotspot is activated" and nothing can connect to hotspot. Any suggestion?
Hi s4 users.
I would like to add support for sph-l720 to my app. I can enable hotspot if a user with root can give me file from
/data/data/com.android.providers.telephony/databases/telephony.db
Please be from stock rom fresh after a profile update.
Also indicate exact model from getprop or a look in build.prop
pm me link or come post it here http://forum.xda-developers.com/not.../app-one-click-hotspot-enabler-menus-t2816159
Thanks in advance for anyone who takes a moment of their time for me.
pate201 said:
I have used root explorer to copy hotspot hack file to framework, then I was getting app crash so flashed stock firmware L720VPUFNAE. Now I am rooted again when I try to turn on hotspot it turns on without notification that "hotspot is activated" and nothing can connect to hotspot. Any suggestion?
Click to expand...
Click to collapse
The NAE hotspot has problems if you try to copy the hack in with a file explorer. If you want it to work with no problems you need to flash it with a custom recovery.
I've reset my Droid Pro to factory and was finally able to root using the Gimli expliot via Framaroot.
My problem now is that any time I try to use wifi, the phone reboots. It will connect to a hotspot, display full wifi bars yet it is unable to connect to the internet.
I am trying to install CM7 by vanillalvl but cannot install Clockwork Mod to be able to get into the recovery menu to install the rom.
InsanityChicken said:
I've reset my Droid Pro to factory and was finally able to root using the Gimli expliot via Framaroot.
My problem now is that any time I try to use wifi, the phone reboots. It will connect to a hotspot, display full wifi bars yet it is unable to connect to the internet.
Click to expand...
Click to collapse
Interesting issue...
I am trying to install CM7 by vanillalvl but cannot install Clockwork Mod to be able to get into the recovery menu to install the rom.
Click to expand...
Click to collapse
Download Droid2 bootstrap recovery and this will take you to Clockwork mod recovery!
Enjoy!!
So recently it shut off around 50% which I have read others are experiencing but thats not the issue im here about. Since then the flashlight by holding power button has stopped working and the hotspot feature shuts itself off randomly. I also cannot delete any files from the ready to flash folder for some reason ive tried everything I know.
jcroy2828 said:
So recently it shut off around 50% which I have read others are experiencing but thats not the issue im here about. Since then the flashlight by holding power button has stopped working and the hotspot feature shuts itself off randomly. I also cannot delete any files from the ready to flash folder for some reason ive tried everything I know.
Click to expand...
Click to collapse
Use ex file explorer turn on root explorer and esare the ready to flash also revert to stock I believe you are using pure nexus
boxguy1 said:
Use ex file explorer turn on root explorer and esare the ready to flash also revert to stock I believe you are using pure nexus
Click to expand...
Click to collapse
switching file browsers did not work. Flashing stock through and then went back to the latest version of purenexus which was my goal to begin with Cheers. Now viper4 android is broken not detecting busybox fix one thing and another thing breaks.
jcroy2828 said:
switching file browsers did not work. Flashing stock through and then went back to the latest version of purenexus which was my goal to begin with Cheers. Now viper4 android is broken not detecting busybox fix one thing and another thing breaks.
Click to expand...
Click to collapse
Here is how to fix viper4arise
Using a file Explorer navigate to /vendor/etc and rename "audio_effects.conf" to "audio_effects.conf.bak", reboot and you should be good.
boxguy1 said:
Use ex file explorer turn on root explorer and esare the ready to flash also revert to stock I believe you are using pure nexus
Click to expand...
Click to collapse
jcroy2828 said:
So recently it shut off around 50% which I have read others are experiencing but thats not the issue im here about. Since then the flashlight by holding power button has stopped working and the hotspot feature shuts itself off randomly. I also cannot delete any files from the ready to flash folder for some reason ive tried everything I know.
Click to expand...
Click to collapse
You could also just use the file manager in TWRP to delete the "ready to flash" folder. Sounds like it's time for a factory reset. :laugh:
v12xke said:
You could also just use the file manager in TWRP to delete the "ready to flash" folder. Sounds like it's time for a factory reset. [emoji23]
Click to expand...
Click to collapse
Long overdue for a reset for me but I was hoping to grab some files off the phone before doing so and I couldn't due to a weird bug. I said **** it and reset anyway
Sent from my Nexus 6P using Tapatalk
boxguy1 said:
Here is how to fix viper4arise
Using a file Explorer navigate to /vendor/etc and rename "audio_effects.conf" to "audio_effects.conf.bak", reboot and you should be good.
Click to expand...
Click to collapse
That did it. Last time I installed purenxus I didn't have to do this which confused me. Should probably run through the usual checklist.
Sent from my Nexus 6P using Tapatalk
jcroy2828 said:
That did it. Last time I installed purenxus I didn't have to do this which confused me. Should probably run through the usual checklist.
Click to expand...
Click to collapse
Yeah try that